All batteries must be shipped by a ground shipping method.
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2020. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.
Check out our other 6S packs and all our Tattu products!
Features
High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1800mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect.
Local after-sales service(located in Dublin, CA)
Specifications
Minimum Capacity: 1300mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Charge Plug: JST-XHR
Discharge Plug: XT60
Dimensions:78mm x 39mm x 38mm (L x W x H)
Net Weight(±20g): 200g
Includes
1x Tattu R-Line Version 4.0 22.2V 6S 1300mAh 130C LiPo Battery - XT60
All batteries must be shipped by a ground shipping method.
Tattu R-Line Version 4.0 1400mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance, and Less weight, Tattu R-line V4 definitely dominate all your races.
Check out all our 6S packs and all our Tattu products!
Features
High-quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1400mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect.
Local after-sales service (Located in Dublin, CA)
Specifications
Minimum Capacity: 1400mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Charge Plug: JST-XHR
Discharge Plug: XT60
Dimensions:78mm x 39mm x 42mm (L x W x H)
Net Weight(±20g): 222g
Includes
1x Tattu R-Line Version 4.0 22.2V 6S 1400mAh LiPo Battery- XT60
All batteries must be shipped by a ground shipping method.
This new Tattu R-Line Version 5.0 22.2V 6S 1200mAh 150C LiPo Battery - XT60 version has higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. There are different R-Line versions for the needs of different FPV racing competitions.
It is worth mentioning that R-line V5 uses Tattu's exclusive technology "Al Boehmite" for the first time, which will offer a significant improvement in overall performance and continuous power output.
Check out our other 6S packs and all our Tattu products!
Features
High-quality, reliable power
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
Specifications
Capacity: 1200mAh
Continuous Discharge Rate: 150C
Max Burst Discharge Rate: 260C
Balance Lead: JST-XHR
Connector: XT60
Dimensions: 78x40x32mm
Weight: 197g
Includes
1x Tattu R-Line Version 5.0 22.2V 6S 1200mAh LiPo Battery- XT60
All batteries must be shipped by a ground shipping method.
This new R-Line version has higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. There are different R-Line versions for the needs of different FPV racing competitions.
It is worth mentioning that R-line V5 uses Tattu's exclusive technology "Al Boehmite" for the first time, which will offer a significant improvement in overall performance and continuous power output.
Check out our other 6S packs and all of our Tattu products!
Features
High-quality, reliable power
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
Specifications
Capacity: 1400mAh
Continuous Discharge Rate: 150C
Max Burst Discharge Rate: 260C
Balance Lead: JST-XHR
Connector: XT60
Dimensions: 78x39x42mm
Weight: 222g
Includes
1x Tattu R-Line Version 5.0 22.2V 6S 1400mAh LiPo Battery- XT60
The Torvol Freestyle Bag is an FPV bag packed with features. It’s a 3-configuration into 1 product. Therefore the most versatile quadcopter sling bag in the market. Ready to rip! Fits transmitter, tools, props, LiPo’s and spare parts inside. Goggles and 1 quad outside using the Quad Strap.
Or fit transmitter, tools, props, LiPo’s and spare parts inside. Goggles and 2 quads outside using an additional Quad Strap (sold separate).
Or fit quad, tools, props, LiPo’s and spare parts inside. Goggles and transmitter outside using the additional transmitter case (sold separately).
The unique design creates a versatile bag with many additional features. The Torvol smart zipper delivers crazy quick access to your gear. And when completely opened up creates the Torvol PITSTOP work area for quick repairs. The protective LiPo pocket on the outside protects LiPo’s from damage and facilitates quick battery change. The sling strap converts into a flight strap using the supplied transmitter clips.
Check out all our backpacks and cases, our selection of Torvol gear!
Features
Holds 1 quad
Heavy Duty lining
Rebuild mat fold out area
Designed to perfectly fit inside Quad PITSTOP Backpacks
Sturdy carrying handle.
Robust zipper.
Stretchy mesh organizer pocket inside.
Specifications
Weight – 0.9 kg
Dimensions – 28 × 14 × 27 cm
Internal dimensions – 25 x 11 x 24 cm
Capacity – 1 quad
Includes
1x Torvol Freestyle Bag
The Torvol Freestyle Goggles Strap is a perfect addition for any freestyle flyer. You can choose from three fashionable styles (Cartoon, Retro, and Quad Maniak)! Each with a battery pouch for your Fatshark batteries.
Check out our FPV goggles and accessories and our selection of Torvol gear!
Features
Upgrade your style with the fresh Torvol goggle straps
Three different versions to choose the one that fits your look
Integrated pocket for goggles battery
Includes
1 x Torvol Freestyle Goggle Strap
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
All drone enthusiasts should own this bag, as this bag makes it simple to transport up to 4 race quadcopters and all of your FPV equipment. Such items include goggles, transmitters, LiPos, tools, and more. This bag has Torvol's PITSTOP section, where a special zipper turns the bag into a portable workshop so you may quickly and easily change and modify your quads. A bag like this is adaptable because of the numerous organizing compartments and dividers. There is plenty of room for your FPV equipment and personal items. You can fasten more oversized objects like a tripod and a foldable chair to the back of this backpack. Other features include a laptop pocket on the back which holds and protects a 15-inch laptop and a charger. Thick back padding and a hip and sternum strap ensure comfort and convenience while traveling to your race. Torvol's PITSTOP PRO V2 comes with CLEANSEAT, which keeps your pants neat in any outdoor space. Make this backpack your own FPV-named bag with the custom nametag slot to have your engraved pilot name on it. It's known that version one of the PRO, was a huge success, and Torvol kept everything that made this backpack amazing, and now it is back and better than ever!
! WHAT’S NEW !
Split back padding for additional comfort.
Secret back pocket to keep your most important belongings stored safely.
Additional frontal loop to adjust your quad straps as desired.
Now available in different colors: Green and Black Stealth,
Check out all our backpacks and cases, our selection of Torvol gear!
Features
Back padding split in two
An additional straps loop at the front
A secret pocket for your most essential items
Easily carries 4 race quadcopters
Integrated Raincover at the bottom
Get your nametag for free in “Custom Nametag”
Torvol PITSTOP area
2 external quad attachment straps
Labtop pocket for 15in and some 17 inch models
Puncture Proof organizer Pockets
Stretch mesh pockets on the sides
Comfortable hip and sternum straps
Comfortable back padding
Specifications
Internal Dimensions: 19.75 x 9.5 x 8.5x inches
Dimensions: 20.5 x 13 x 10.75 inches
Color: Stealth Black
Weight: 3.05 kg
Capacity: 30 L
What Does It Fit?
FPV Quadcopters of 6″ and less.
Cinewhoops and Racewhoops of 4″ and less.
DJI Avata, Air 2S, FPV (without propellers), Mini 2/SE, Mavic 2 Pro/Zoom, Mavic 3, Mavic Air, Mavic Air 2, Mavic Mini, Mavic Pro/Pro Platinium, Spark, Tello & Tello Edu.
Includes
Torvol Quad PITSTOP PRO V2 Backpack - Choose Your Color
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The most beloved team member of any professional pilot. Now available in all black "Stealth" edition & Green/Black.
The Torvol Quad PITSTOP V2 Backpack is designed for FPV racing enthusiasts. It easily carries two drones, goggles, transmitter, LiPos, tools, and more. Its smart zipper converts into a portable workspace for adjusting and customizing your drone racing materials. Multiple pockets, dividers, and straps provide ample space for FPV gears, tripod, and personal items. Thick back padding and straps ensure comfort and convenience.
The Torvol Quad PITSTOP V2 Backpack will easily carry four quads and all your FPV gear, such as goggles, transmitters, LiPo’s, tools, and more for any race. It features Torvol’s PITSTOP area, a portable workspace to adjust and modify your quads quickly and effortlessly. Torvol’s CLEANSEAT prevents you from getting dirty knees while doing so. The backpack includes multiple organizer pockets, providing ample space for smaller FPV gear and personal belongings. At the same time, larger items like a tripod and a foldable chair can be strapped to the outside.
An expandable rain cover, thick back padding & a hip and sternum strap ensure comfort and convenience while traveling to your race. Choose green accents and a black body for your backpack, or go total black stealth!
! WHAT’S NEW !
Split back padding for additional comfort.
Secret back pocket to keep your most important belongings stored safely.
Now available in different colors: Green and Black Stealth,
Check out all our backpacks and cases, our selection of Torvol gear!
Features
Easily carries 2 FPV racing drones and all equipment necessary for your drone flight; goggles, transmitter, LiPo’s, tools and more. Torvol’s PITSTOP area: The Torvol smart zipper transforms the backpack into a portable workspace to adjust and modify your drone racing material quickly and effortless.
Multiple organizer pockets and dividers which makes it highly customizable. There is ample space for your FPV gears and personal belongings. Larger items like a tripod and a foldable chair can be strapped to the outside.
An expandable rain cover integrated at the bottom
Thick back padding and a hip and sternum strap ensure comfort and convenience while traveling to your race.
Torvol’s CLEANSEAT keeps your pants neat on any outdoor space.
Specifications
Weight: 2kg
Dimensions: 31 × 23 × 45cm
Internal Dimensions: 24 x 19 x 45cm
Capacity: 26L
Materials: 85% Polyester, 8% PVC, 7% Polyurethane
Which quads and drones will fit inside?
FPV Quadcopters of 5″ and less.
Cinewhoops and Racewhoops of 4″ and less.
DJI Avata, Air 2S, FPV (without propellers), Mini 2/SE, Mavic 2 Pro/Zoom, Mavic 3, Mavic Air, Mavic Air 2, Mavic Mini, Mavic Pro/Pro Platinium, Spark, Tello & Tello Edu.
Includes
1x Torvol Quad PITSTOP V2 Backpack - Choose Your Color
*LiPo Safe Pouch is not included
This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from any interference that can be caused by your electronics. It can be used on your receiver as well to move your Omni antenna far above your head or to move your patch farther out.
Check out all our pigtails, connectors and adapters and the rest of our TrueRC selection!
Specifications
Length: 7 cm (measured from the ends of each connector)
Connector: SMA Male/Female
Coax Cable: 4MM Rigid
Color: Black
Includes
1x TrueRC 5CM SMA Male to Female Rigid (but Flexible) Extension
This TrueRC Core 5.8GHz 85mm MMCX 90° Antenna provides optimal, high-performance signal quality for FPV drone flights. The innovative design and lightweight materials make this RHCP antenna both robust and durable.
The CORE 5.8 is a distillation of all those years working with drone enthusiasts and professionals alike. This omnidirectional antenna starts with a refined RF design that provides excellent consistency within units and various cable configurations. TrueRC team then added a very durable outer shell that protects the antenna from inevitable crashes.
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
FEATURES
Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Flexible coax cable option that deflect impacts
Exclusive knurled True-SMA for easy tightening
SPECIFICATIONS:
Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -10 to -20dB (1.9%)
Bandwidth: 5.5Hz-6.1GHz
Radiation Efficiency: 98%
SWR: <=1.2:1
Dimensions(head): 16.9mm dia. x 13.1mm height.
Weight: 4grams
Length: 85mm
Connector: 90°-MMCX
Includes
1x TrueRC Core 5.8GHz 85mm MMCX 90° Antenna - Grey - RHCP
This TrueRC Core 5.8GHz U.FL antenna has an 85mm side feed and features right-hand circular polarization (RHCP). Its performance is optimized for high-frequency FPV radio systems, providing an impressive axial ratio of <1.2. This product promises effective signal reception and reliable connection over long distance.
The CORE 5.8 is a distillation of all those years working with drone enthusiasts and professionals alike. This omnidirectional antenna starts with a refined RF design that provides excellent consistency within units and various cable configurations. TrueRC team then added a very durable outer shell that protects the antenna from inevitable crashes.
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features
Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Side exit cable for novel mounting options
Exclusive knurled True-SMA for easy tightening
Specifications
Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -10 to -20dB (1.9%)
Bandwidth: 5.5Hz-6.1GHz
Radiation Efficiency: 98%
SWR: <=1.2:1
Dimensions(head): 16.9mm dia. x 13.1mm height.
Weight: 2.3grams
Length: 85mm
Connector: UFL
Includes
TrueRC Core 5.8GHz 85mm Side Feed U.FL Antenna - Grey - RHCP
The D-pole is our work on the dipole, one of the simplest form of antenna. Extremely durable and light weight it is perfect for micro fpv. It’s wide band characteristic cover the whole 5-6Ghz band, making it equally as good for analog or digital communication.Also available with an MMCX connector.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications
Gain: 2.5dbic
Bandwidth: 5GHz-6GHz
Weight: .88g
Size: 80mm x 25mm
Cable: Flexible RG178
Connector: U.fl
Includes
1x TrueRC D-Pole 5.8GHz U.FL Antenna - Linear
The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Weight (long): 7.8 g
Size: 12.7mm x 125mm
Cable: Carbon fiber reinforced
Connector: RP-SMA
Includes
1x TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna - LHCP
The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Weight: 6.2 g
Size: 12.7mm x 70mm
Cable: Carbon fiber reinforced
Connector: RP-SMA
Includes
1x TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna - LHCP
4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm (PDF)
Connector: RP-SMA
Includes
4x TrueRC Singularity 5.8GHz Stubby Receiver Antenna
This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications
Polarization: LHCP
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm
Connector: RP-SMA
Includes
1x TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI
TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. This is the Singularity 5.8, now in a stubby form factor. The case is made thicker than the original version for extreme durability.We also carry these in RP-SMA for the DJI Digital FPV GogglesCheck out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Connector: SMA
Size: 12.7mm x 20mm (PDF)
Weight: 3.7 g
Patent Pending
Includes
1x TrueRC Singularity 5.8GHz Stubby SMA Antenna - RHCP
Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a killer look. Improved beam width of 120deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out our other HD Zero and Shark Byte compatible products as well as our TrueRC selection!
Features
Direct replacement for stock patch antennas
Compact low-profile design on your goggles, easy to store and transport
High 10 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, works even out of the 5.8GHz band
Specifications
TrueRC X-AIR MK II
Bandwidth: 5.1GHz-7.0GHz
Gain: 10 dBic
Polarization: RHCP
Beam-width: 120deg
Beam-width @-3dB: 68deg
Connector: U.fl
Dimensions: 34x34x15mm
Weight: 8.8g each
TrueRC Singularity Stubby
Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Connector: SMA
Dimensions: 12.7x20mm
Weight: 3.7g each
Includes
1x TrueRC X-AIR 5.8GHz MK II & Stubbies Combo for HDzero/SharkByte
These TrueRC X-AIR 5.8GHz MK II Antennas are compatible with the DJI Goggles 2. The MCX Male connectors fit the DJI Goggles 2 perfectly. These antennas help you obtain 9.5-10.5dBic gain combined with a healthy flyable beam width of 120deg. As with all other components of X-AIR antennas, the custom MCX Male connector is made to the highest standards to fit your DJI Goggles 2 perfectly and make sure every bit of RF power is transferred from the X-AIR. Easy tightening and a quality look are exclusive to TrueRC. Most compact antennas of this gain level, allowing you to leave them connected all of the time without fear of breaking them. Its time for upgrades, its time to move with the times, as the future is now!
Check out all our FPV Receivers & Antennas, and all our TrueRC gear!
Features
High 9.5-10.5 dBic for long-range and signal penetration
Compact low-profile design, easy to store and transport
Mount direct on the DJI Goggles 2
High 10.5 dBic for long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 120 degree beam for each antenna combining to 135deg beam width
MCX Male Connectors
Specifications
Bandwidth: 5.1GHz-6.7GHz
Gain: 9.5-10.5 dBic
Polarization: LHCP
Beam-width: 120deg
Beam-width @-3dB**: 68deg.
Connector: MCX Male
Dimension: 34x34x24mm
Include mounts for installation onto DJI Goggles 2.
Includes
2x TrueRC X-AIR 5.8GHz MK II Antenna - DJI Goggles 2
Our high-efficiency X-AIR MK II into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Great 10dBic gain combined with a healthy flyable beam width of 120deg, yield an amazing flight experience in a compact and low profile package. Fill the remaining ports with a pair of OCP and you got the antennas full house.
Check out all our FPV Receivers & Antennas, and all our TrueRC gear!
Features
Circularly Polarized
Sector-type beam shape (widest on horizontal)
Mount direct on the HDzero module with included slide-on mounts.
Compact low-profile design, easy to store and transport
High 10 dBic for long-range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 120-degree beam for each antenna combined with 135deg beam width
Custom knurled SMA connectors
Specifications
Bandwidth: 5.1GHz-6.7GHz
Polarization: RHCP
Gain: 9.5-10.5 dBic
Beam-Width: 120deg
Beam-width @-3dB: 68deg
Antenna Dimensions: 32x32x15mm
Connector: SMA Male
Weight: 15g
Includes
Two X-air MKII antennas (one for each side).
Two slide-on mounts.
More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out all our FPV Receivers & Antennas, and all our TrueRC gear!
Features
Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Highly compact included stubby antennas for combined directional and omnidirectional coverage
Specifications
X2-Air
Bandwidth: 5.1GHz-7.0GHz
Polarization: LHCP
Gain: 13 dBic
Beam-Width: 150deg
Beam-width @-3dB: 75deg
Antenna Dimensions: 72mm x 34mm x 15mm
Connection: Custom knurled RP-SMA
Weight: 20g
Stubby
Bandwidth: 5.6GHz-6.0GHz
Polarization: LHCP
Gain: 1.9 dBic
Radiation Efficiency: 99%
Antenna Dimensions: 12.7mm x 20mm
Connection: RP-SMA
Weight: 3.7g
Includes
2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna
2x TrueRC Stubby 5.8GHz Receiver Antenna
More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of singularity stubby and performances never been so convenient!
Check out all our FPV Receivers & Antennas, and all our TrueRC gear!
Features
Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Specifications
Bandwidth: 5.1GHz-7.0GHz
Polarization: LHCP
Gain: 13 dBic
Beam-Width: 150deg
Beam-width @-3dB: 75deg
Antenna Dimensions: 72mm x 34mm x 15mm
Connection: Custom knurled RP-SMA
Weight: 20g
Includes
2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP
The new TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP has more gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amazing flight experience in the toughest conditions.
Check out all our FPV Receivers & Antennas, and all our TrueRC gear!
Features
Circularly Polarized
Sector type beam shape (widest on horizontal)
Mount direct on HDzero module with included slide-on mounts.
Compact low-profile design, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 165deg beam width
Custom knurled SMA connectors
Specifications
Bandwidth: 5.1GHz-7.0GHz
Polarization: RHCP
Gain: 13 dBic
Beam-Width: 150deg
Beam-width @-3dB: 75deg
Antenna Dimensions: 72x34x15mm
Connector: SMA
Weight: 20g
Includes
2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4
2x HDZero VRX4 mounting brackets for X2-Air MKII
Optimize your FPV experience with the TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP. Following on the latest improvement of the X-AIR 5.8 MK II, the TrueRC X²-AIR comes with a new compact and light design. This antenna offers high gain and a wide horizontal beam for superior performance. Enjoy improved range and reception with this 5.8GHz SMA antenna.
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Specifications
Gain: 13 dBic
Beam-width Horizontal: 150deg
Beam-width Vertical: 62deg
Hor. beam @-3dB: 74deg.
Vert. beam @-3dB: 34deg.
Connector: SMA
Polarization: RHCP
Dimension: 72mmx34mmx22mm
Weight: 16g
Includes
1x TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP
The new V1.5 design fits DJI O3 System
The 2Fiddy Freestyle Drone is designed to provide maximum power, response, and durability while keeping the weight light. This simple yet durable frame combines a variety of carbon thicknesses, component layouts, and fasteners for optimized performance. Smooth resonance and vibrations make for fun and reliable flying. This frame kit comes with 4" arms and is compatible with 3.5" arms.
"The final entry in this category is the Ummagawd 2Fiddy, designed by Tommy Tibajia. I always felt that 5” sub-250g was pointless. To get the weight down, you had to give up too much in terms of durability; and the disc loading was so low that the quad was super floaty and not fun to fly. The 2Fiddy changed all that. Obviously, Tommy can’t defy the laws of physics, but it doesn’t feel super-floaty like other sub-250g 5” I’ve flown. The durability is not as high as a 3” or 3.5”, but it’s not made of glass either. And oh my gosh how good it flies. The responsiveness, acceleration, and sharp cornering are ridiculous. If you plan to crash a lot, the 2Fiddy may not be for your, but if your focus is purely on flight performance, it’s the best experience I’ve ever had under 250g." - Joshua Bardwell
Check out the rest of our 4" frames, as well as the rest of our Ummagawd selection
Features
AIO FC mounting ONLY (25.5x25.5mm)
4mm Thick Quick Swap Arms
2 Hole or Single Hole FPV Camera Mount (0-35deg)
Made for Caddx Vista (but Analog Friendly)
Toilet Tank OR Standard Battery Position
14mm (low pro) & 20mm (full stack) Standoffs INCLUDED
FPV Camera Hardware INCLUDED
AIO FC Hardware INCLUDED
Ummagrip INCLUDED
TWO Battery Straps INCLUDED
Zip Ties INCLUDED
Spare Hardware INCLUDED
Specifications
Stack Mounting: 20x20mm & 25.5x25.5mm (AIO FC Only)
Rear Mounting: 20x20mm
Motor Mount Pattern: 12x12mm
Arm Thickness: 4mm
Includes
1x UmmaGawd 2Fiddy V1.5 HD O3 Ultra Light Freestyle 3.5" - 4" Frame Kit
Experience high performance with the Ummagawd Aerolite Motor. Featuring a 1605 size and 3600Kv, this gunmetal and blue motor is engineered for optimum power and thrust for FPV racing for a smooth and efficient flight.
Check out our vast brushless motors selection, and make sure to check out our other Ummagawd products!
NOTE: The titanium screws use a M1.3 hex driver and is a 12x12 mounting configuration. This motor is designed specifically for the Ummagawd 2fiddy and the Ummagawd Grinderino frame, it may not work with other frames.
Specifications
Kv: 3600Kv
Installation hole position: 12×12mm，M2
Prop mounting shaft diameter: 1.5mm
Lead: 20#AWG 150mm
Stator Length: 5mm
Shaft Diameter: 3mm
Stator Diameter: 22mm
Idle Current: Idle Current (10 Seconds)@10V: 1.2A
Weight: 13.8g (2cm Wires)
Internal Resistance: 68mΩ
Max Current (3S): 24.3A
Max. Efficiency Current: (4-7A)>83%
Max Continuous Power (W) 3S: 360
Rated Voltage (Lipo): 2-4S
Includes
1x Ummagawd Aerolite 1605 3600Kv Motor - Gunmetal & Blue
1x Hardware Set
Once again, Botgrinder and the Ummagawd team make another absolute banger of a frame. - Imagine a Demibot-level frame but in a smaller package! This frame will fit a single board whoop-style AIO or a 20 x 20 stack. The rear of the frame provides plenty of space to fit a VTX of your choice, and just the same, the front will accommodate any camera. And, despite its size, it's still under 250g all-up weight!
Be sure to check out all our 3.5" frames, as well as the rest of our Ummagawd selection!
Specifications
Arms: 4mm
Top Plate: 2mm
Bottom Plate: 2mm
Mid Plate: 2mm
Standoffs: 6mm OD 7075 Aluminum
FC Mounting: 20x20 and 25.5x25.5 (whoop style)
VTX Mounting: 20x20 and 25.5x25.5 (whoop style)
Frame Weight: 65g
Motor Mounting Pattern: 12mm x 12mm
Includes
1x Ummagawd Botgrinder Grinderino 3.5" Freestyle Micro Frame Kit
1x Top Plate
4x Arms
1x Bottom Plate
1x Mid Plate (with press nuts)
1x Hardware Kit
1x Ummagrip Battery Pad
2x Battery Straps
1x Set of TPU FPV Camera Mounts
Replacement TPU camera mount for the Ummagawd Botgrinder Grinderino 3.5" Micro Frame Kit.
This is the official FPV camera mount for the Botgrinder Grinderino. Designed to work with several types of cameras, including the DJI O3 camera. These are designed to fit the 6mm OD standoffs.
Check out our Ummagawd Frames & Accessories, as well as the rest of our Ummagawd selection
Includes
1x Ummagawd Botgrinder Grinderino Replacement TPU Camera Mount (2pc) - Black
The Demibot Frame is here!!! "When Botgrinder and the Ummagawd Company get together, magic happens."
We've made a frame that can not only survive the most brutal bando gauntlet imaginable but can also rip the smoothest freestyle flow you can ever experience.The same details that make this frame nearly indestructible, also make it one of the smoothest flying frames available. With 6mm thick arms, held together by 3mm thick plates, and 6mm OD standoffs, this frame bolts solidly together into one sturdy mass, which makes gyros very happy.
The great durability, flight performance, and sick looks of the DemiBot can be attributed to a few things working very well together. The beefy 6mm arms, mated together with a 6mm thick central block, all held together with 3mm thick plates, make the core of this frame a significantly dense mass. The Demibot is definitely no ultralight, but that's also why it takes a beating and flies just so damn smooth.
Check out our other 5" frames, as well as the rest of our Ummagawd selection!
Features
The block facilitates an interface in which all 4 arms meet in the middle. This makes the entire assembly act like one solid piece but with just the right amount of energy loss (aka resonance damping).
If you can manage to break an arm, it can be replaced by removing just ONE bolt. This is achieved by having each arm wedged between the adjacent arm and the center block. Therefore it only needs one bolt to keep it there.
With some clever design tricks, this true-X frame maintains hardware independence between the flight stack and the arms while keeping the electronics in the center. We’ve included press nuts for the flight stack, as well as an installation tool (M3 screw and washer) so that you easily seat it yourself. You just choose which mounting configuration fits your electronics and press in the nuts.
Specifications
Stack Mounting: Two 30.5x30.5mm stacks(center and rear) + Two 20x20mm stacks
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Motor Mount Pattern: 16x16
Main Plate Thickness: 3mm
Frame Shape: X
Frame Weight: 165 grams
Arm Thickness: 6mm
Includes
1x Top Plate
2x Arms
1x Bottom Plate
1x Mid Plate (with a bag of press nuts)
1x Hardware Kit
1x Ummagrip Battery Pad
2x Kevlar Battery Straps
1x TPU FPV Camera Mounts
When every part of your quad must perform, don’t let your battery pad be the weak link. After an exhaustive search, Tommy Tibajia (Ummagawd) found a material that would all but eliminate the issue of ejected batteries. This ultra sticky battery pad keeps your lipo’s locked in place, and when combined with a high quality lipo strap, ejected and damaged batteries are a thing of the past. After testing a variety of formulas, thicknesses, stiffness and bonding adhesives, this final iteration became Ummagrip, the official battery pad for the Remix FPV freestyle frame.
Quickly after the release of the Remix, the demand was loud and clear. Umma grip is now available in a universal, cut-to-size, battery pad that can be fitted to just about any frame. The Ummagrip universal battery pad is 100mm long, by 50mm wide, and 3mm thick. There’s definitely plenty of material to cover most frames and keep your battery clear of any bolts. Ummagrip was molded directly onto high quality 3M permanent adhesive on the frame side and textured with a embossed Ummagawd logo pattern on the battery side. These features help the pad stay on your frame and grip batteries without getting stuck to them.
Cleaning Instructions:
We’ve found that a damp sponge is the best method to clean off your Ummagrip. Water is all that’s needed to get dust and dirt un-stuck from the pad, but as it get’s cleaner and drier, it gets more and more sticky. So avoid things like paper towels, tissues, tshirts, or rags as they might leave too much lint behind.
Although Ummagrip is extremely sticky when clean and dust free, it does not need to be perfectly clean to still work. Even well coated in dust, it still grips batteries noticeably better than foam or rubber pads ever could. Ummagrip is the new standard. Anything else, would just be irresponsible.
Check out the rest of our battery straps & pads, as well as all our Ummagawd products!
Specifications
Dimensions: 3x50x100mm
Includes
1x Ummagawd UMMAGRIP Universal Super Sticky Battery Pad
The all-new Vannystyle frame by Alex Vanover! After one year of testing nine different versions of this frame, we finally came down to what I believe to be the perfect all-around freestyle frame.
This frame features some unique features such as the ability to toilet tank the lipo battery to get the weight closer to the center of gravity which results in better overall flight performance. Even though the frame is only 120 grams with hardware, it has 5.5mm arms and 2.5mm plates all around making it extremely durable in the toughest of crashes.
One of the coolest features of the frame is the puzzle piece on the bottom plate. The puzzle piece holds the arms in place so you can take off the bottom plate and swap it out. This makes repairing so easy when the frame inevitably breaks.
It also boasts extreme camera protection so you won't have to worry about smashing cameras or lenses in crashes. In between the bottom plate and mid plate are two vertical carbon fiber plates, which help stiffen the frame up even more and also isolate the resonance in the frame.
The frame has 20x20 and 30x30 m3 mounting as well as 20x20 m2 and 25.5x25.5 m2 mounting for all of the newest Digital FPV transmitters.
Be sure to check out our 5" frame selection!
Specifications
Wheelbase 5": 222mm
Top Plate: 2.5mm
Bottom Plate: 2.5mm
Arm thickness: 5.5mm
Stack Mounting: 30.5m30.5mm & 20x20mm
Weight: 120g
Includes
1x Frame kit (4x arms, 2x cam plates, 2x puzzle piece, 2x stiff plates, 1x bottom plate, 1x top plate, 1x mid plate, 1x hardware kit)
High Definition FPV just got better reception! The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to create a truly circular wave on both bands at the same time, virtually eliminating pixelization of the video link in difficult RF environments. Designed by IBCrazy and manufactured in the USA, the BlueBeam® HD utilizes patent pending technology not found in any other antenna.
Check out all our DJI compatible gear, and all our VAS gear!
Specifications
Polarizaton: LHCP
Frequency range: 2380-2600MHz (2.4GHz) / 5500-6200MHz (5.8GHz)
Gain: 1.95dbic (2.4GHz) / 2.5dbic (5.8GHz)
Connector: RP-SMA
Includes
1x VAS BlueBeam HD 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2
The Cyclops is a circular array designed specifically to work with the DJI FPV HD system. This single-panel array houses four left-hand circularly polarized antennas each with a 120-degree beamwidth. If you are looking to punch through thick foliage, and buildings, or travel long distances previously unobtainable by the DJI FPV system, the Cyclops antenna should be your first choice. A custom bracket with hardware for mounting the array to the DJI FPV goggles and all required cables are also included.
Specifications
Gain: 10.25dbi
Beamwidth: 120 degrees
-3db point: 60 degrees
Includes
1 x VAS Cyclops Mini Antenna Array for DJI Digital FPV System - LHCP
Introducing the VAS Mad Mushroom V2 5.8GHz FPV Antenna!
Designed for the professional operator, the Mad Mushroom V2 is designed to deliver a solid video feed in the harshest of environments. The wide bandwidth makes it useful for not just FPV, but HD video links and high performance WiFi applications.
Check out all our VTX Antennas and our selection of VAS products!
Specifications
Gain: 1.35dbic
Axial ratio: 0.92
Bandwidth: 5100MHz-6500MHz (It's really wide band!)
Polarization: Right Hand Circular Polarized (RHCP)
Weight: 11.8g (0.41oz)
Includes
1X Video Aerial Systems VAS Mad Mushroom V2 5.8GHz SMA Antenna - RHCP
1X VAS Finger Wrench
Long range and 360 degrees of coverage in one, the Sky Hammer is a true long range omni-directional antenna! Designed by IBCrazy, the Sky Hammer utilizes a pair of high performance Minion Pro antennas precisely phased and impedance matched to achieve 5.25dbic of gain and 360 degrees of coverage. The stacking and phasing takes the unused vertical coverage of a single antenna and pushes it outward along the horizon right where you need it. While typically considered to be a receiver antenna, the Sky Hammer can be mounted on a long range quad for exploring places where other antennas simply cannot reach.
Check out all our FPV receiver antennas, and our selection of VAS gear!
Specifications
Gain: 5.25dbic
Axial Ratio: 0.94 (measured)
Horizontal coverage: 360 degrees
Vertical coverage: +/- 20 degrees
Bandwidth: 5400-6100 MHz
Includes
1x VAS SkyHammer 5.8GHz SMA Receiver Antenna - RHCP
1x SMA Extension
The Victory is another new antenna technology from Video Aerial Systems and the mind of antenna developer IBCrazy. Don’t let the square shape and small size fool you, the Victory is a true high-performance circularly polarized antenna that makes no compromise when it comes to performance. When used as a receiver antenna, the Victory’s small size and high axial ratio make it perfect for low-profile mounts without sacrificing performance. When used as a transmitter antenna, the true 1.9dbic gain allows for extremely long-range flights. The uniform radiation pattern makes it perfect for racing and freestyle flights.
Specifications
Gain: 1.9dbic
Axial ratio: 0.96
Weight: 3.5 grams
Connector: RP-SMA
Includes
4x VAS Victory Stubby Antennas for DJI FPV System
FPV’s favorite “patch killer” antenna has a new upgraded element. The patent pending vector-phasing technology of the Crosshair Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth.
Check out all our VTX Antennas and our selection of VAS products!
Specifications
Gain: 10.25dbic
Axial ratio: 0.99 (measured)
Bandwidth: 1080Mhz-1480MHz
Flight beam: 120 degrees
-3db point: +/- 30 degrees
Includes
1x Video Aerial Systems VAS Crosshair Xtreme 5.8GHz SMA FPV Receiver Antenna - RHCP
The ViFly Cam Switcher allows you to simply and easily switch between two FPV cameras via your RC transmitter. Whether you're using a PWM receiver on an RC plane, or SBUS/IBUS/DSMX RX on a racing quad, the ViFly Cam Switcher can use the signal from many types of RX thanks to its clever design and programming. No need to involve the flight controller. This means no Betaflight configuration fiddling. This also means faster response and minimal transition time between FPV feeds. Super tiny and lightweight, perfect for building a "CheaterKwad" of just about any size, as seen below...
Check out all our FPV Cameras for plenty of options to attach to this!
Features
Fast Camera Switching
Easy Setup, No Betaflight Configuration
Compatible with a Wide Range of Receivers
Tiny and Lightweight
Specifications
Inputs: 2
Input Voltage: 4.2-25V
Dimensions: 18x9mm
Weight: 0.5g
Includes
1x +ViFly Cam Switcher
1x Heat Shrink
1x Wire Set
1x Instructions
Wiring Diagram
The Vifly Finder 2 is compatible with any flight controller or receiver with buzzer or pwm connection (just about everything) and its internal battery means it keeps functioning even if your flight battery is ejected, damaged or drained. This is a very simple to use, very effective drone recovery device.
For the VILFY Finder 2, we have released a new version. The new version has longer working time and louder volume. In addition, the battery discharge rate lowered a lot and it can be stored for very long time even you didn't charge it. "
Check out all our buzzers and alarms and all our Vifly products!
Features
Advanced ViSense Technology. With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer automatically enter into sleep mode at night to save power and not disturb.
Much Louder than Standard Buzzer.To easily find the lost drone in long distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.
Two Options to Disarm the Buzzer. Option 1, Disarm with button: Disconnect main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release. Option 2, Disarm with main battery: Disconnect main battery, then connect main battery for 3-6 seconds and disconnect it again. It will beep 3 times when disarmed successfully.
Compatible with Both FPV quadcopter and RC Airplane. VIFLY finder 2 is programmed to be compatible with any flight controllers with PWM or Buzzer connections in your FPV quads, and regular receivers in your RC airplanes. No extra setup required, it will automatically recognize the device it is connected to.
Specifications
Volume: Up to 105 dB
Working Time: Up to 30 hours
Charge Time: 1.5 hours
Battery: 80mAh LiPo
Input Voltage:4.5-8.5V
Dimensions: 24x13x16 mm
Weight: 5 g
Wiring Diagram
Wiring Diagram:
Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight.
How To Use
The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.
The video transmitter for the Fat Shark Dominator HD Goggles and Walksnail Goggles has arrived! The first of new generation of HD cameras and video transmitters, they feature lower latency, reduced weight and more convenient form factor while also managing to cram antenna diversity and an 8gb onboard 1080 DVR in there!Also available with Nano camera.
Check out all our Walksnail HD products!
Features
Compatible with FatShark Dominator HD FPV Goggles
Canvas mode and distance detection with the dual-antenna system
Reliable digital HD video transmission (1080P – H.265 encoding)
8gb onboard DVR
Lightest digital VTX (only 16 grams)
Ultra low-latency (22ms)
Specifications
Video Transmitter
Video Resolution: 1080p / 720p
Antenna Connector: U.fl
Channels: 8
Operational Frequency: 5.725-5.850GHz
Latency: 22ms Average
Input Voltage: 6-25.2V
Transition Power: FCC<30dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
Internal Storage: 8GB
FC Connection Port: JST1.0 x 6
Operating Temperature: -20° to 40°
Supported FC Firmware: Betaflight
USB Connection: JST x 4 to USB-A
Mounting: 25x25mm
Dimensions: 33x33x9.5mm
Weight: 16g
Camera
Image Sensor: 1/27"
Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
Aspect Ration: 16/9 and 4/3 Switchable
Lens: 2.1mm
Field Of View: 170°
Aperture: F 2.0
Shutter Style: Rolling Shutter
Minimum Illumination: 0.001Lux
Cable Length: 140mm
Dimensions: 19x19x22mm
Weight: 6g
Antennas
Polarization: LHCP
Bandwidth: 5.6-5.9GHz
Gain: 2dBi Average
Radiation Efficiency: >= 98%
VSWR: <=1.4
Connector: U.fl
Length: 90mm
Weight: 1.5g
Includes
1x Walksnail HD Micro Camera
1x Avatar HD VTX
2x Antennas
1x FC Connection Cable
1x USB Adapter
4x M2 3mm Screws
4x M2 4mm Screws
4x M2 5mm Screws
2x M1.2 1.5mm Screws
The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.
The video transmitter for the Fat Shark Dominator HD Goggles and Walksnail Goggles has arrived! The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. The VTX is resistant to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and an 8GB and 32GB built-in storage option. The 32GB VTX delivers unmatched stability due to the aid of being equipped with Gyroflow technology. This allows super smooth and stabilized video from your FPV system. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!
Check out all our Walksnail HD products!
Features
Compatible with FatShark Dominator HD FPV Goggles
Canvas mode and distance detection with the dual-antenna system
Reliable digital HD video transmission (1080P – H.265 encoding)
Ultra low-latency (22ms)
2K pixel, 120fps, 4:3 native sensor
Support Gyroflow
1080P HD FPV
F/2.0 Large Aperture
160° wide-angle FOV
VTX Specifications
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
1/O Interface JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes 25.5x25.5mm; 20x20mm
Dimensions 33.5x33.5x10.5mm
Storage 8G/32G
Recording 1080p/720p
Weight 17.6g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 6V-25.2V
Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD Canvas mode
Latency Average delay 22ms
Antenna 1(IPEX)
Camera Specifications
Model Avatar V2 camera
Image Sensor 1/3.2-Inch 4Mp 4:3sensor
Resolution 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
Ratio 4:3 native /16:9
Lens 2.1mm
FOV 160°
Aperture F2.0
Shutter Rolling shutter
Min.Illumination 0.001Lux
Weight 7.2g
Dimensions 19x19x22mm
Coaxial Cable 140mm
Gyroflow supported/ non-supported, two version
Antenna Specifications
Polarization LHCP
Bandwidth 5600MHz-6000MHz.
Gain 1.9dBi
VSWR ≤1.5
Input Impedance 50Ω
Interface IPEX-1
Size R15x45mm (without cable）
Weight 2g
Includes
USB transfer extension cable X1
4 Pin silicone cable X1
M2x4mm screws X8
M2x5mm screws X4
M2x6mm screws X4
M2x14mm screws X4
M2x5x0.5mm gasket X4
The Avatar HD Micro Camera for the Walksnail Avatar VTX works with Walksnail Avatar and Fat Shark Dominator HD Goggles.
Check out all our Walksnail HD products!
Features
With 2K 120fps pixels and native 4:3 sensor, ensures an excellent picture quality. Additionally, the native 4:3 image ratio provides the advantage of capturing a larger area of the surrounding scenery.
The new camera V2 Camera with Gyro supports Gyroflow, Lets you smooth and stabilize your footage.
F/2.0 Aperture increases the amount of light, making the picture more sharp and colorful.
Comes with a 160° wide-angle FOV.
Specifications
Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility
1080P/100fps compatibility;
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling shutter
Weight: 7.2g
Dimensions: 19x19x22mm
Coaxial Cable: 140mm
Gyroflow supported
Includes
1x Walksnail Avatar Micro HD FPV Camera V2 w/ Gyro and 14mm Cable
The Avatar HD Micro Camera for the Walksnail Avatar VTX works with Walksnail Avatar and Fat Shark Dominator HD Goggles.
Check out all our Walksnail HD products!
Specifications
Image Sensor: 1/27"
Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
Aspect Ratio: 16/9 and 4/3 Switchable
Lens: 2.1mm
Field Of View: 170°
Aperture: F2.0
Shutter Style: Rolling Shutter
Minimum Illumination: 0.001Lux
Cable Length: 140mm
Dimensions: 19x19x22mm
Weight: 6g
Includes
1x Walksnail Avatar Micro HD FPV Camera w/ Cable
The Avatar HD Pro Micro Camera for the Walksnail Avatar VTX works with Walksnail Avatar and Fat Shark Dominator HD Goggles.
Check out all our Walksnail HD products!
Features
1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision as long as day vision.
Support 1080P/120fps high frame, the first high frame night vision HD camera in FPV market.
Support Gyroflow, takes you a smooth and stabilized video quality.
F/1.6 Large Aperture to increase the amount of incoming light, make picture more incomparable.
Walksnail Avatar camera V2 has 160° wide-angle FOV.
Specifications
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ sensor
Resolution: 1080P/60fps;720P/100fps,720P/60fps;1080P/120fps compatibility;
Ratio: 16/9; 4/3
Lens: 8Mp
FOV: 160°
Aperture: F1.6
Shutter: Rolling shutter
Min.Illumination: 0.00001Lux
Weight: 9.5g
Dimensions: 19x19x24mm
Coaxial Cable: 140mm
Gyroflow supported
Includes
1x Walksnail Avatar Micro HD Pro FPV Camera V2 w/ Gyro and 14mm Cable
The Avatar HD Nano Camera for the Walksnail Avatar VTX works with Walksnail Avatar and Fat Shark Dominator HD Goggles.
Check out all our Walksnail HD products!
Specifications
Image Sensor: 1/27"
Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
Aspect Ratio: 16/9 and 4/3 Switchable
Lens: 2.1mm
Field Of View: 170°
Aperture: F 2.0
Shutter Style: Rolling Shutter
Minimum Illumination: 0.001Lux
Cable Length: 90mm
Dimensions: 14x14x17mm
Weight: 3.5g
Includes
1x Walksnail HD Nano Camera
The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.
The video transmitter for the Fat Shark Dominator HD Goggles and Walksnail Goggles has arrived! The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability due to the aid of being equipped with Gyroflow technology. This allows super smooth and stabilized video from your FPV system. The VTX is resistant to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage option. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!
Check out all our Walksnail HD products!
Features
Compatible with FatShark Dominator HD FPV Goggles
Canvas mode and distance detection with the dual-antenna system
Reliable digital HD video transmission (1080P – H.265 encoding)
1080P 120fps compatibility
Sony Starvis Ⅱ Technology
Built-in 32GB storage
High frame starlight
Lightweight design
22ms low latency
Ranging Mode
4km range
6V-25.2V
FOV 160°
VTX Specifications
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm; 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 8G/32G
Recording: 1080p/720p
Weight: 17.6g
Operating Temperature: -20-40℃
Channels 8
Wide Power Input: 6V-25.2V
Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD Canvas mode
Latency: Average delay 22ms
Antenna: 1(IPEX)
Camera Specifications
Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
Model: Avatar HD Pro camera
Min.Illumination: 0.00001Lux
Dimensions: 19x19x24mm
Shutter: Rolling shutter
Coaxial Cable: 140mm
Ratio: 16/9; 4/3
Aperture: F1.6
Weight: 9.5g
Lens: 8Mp
FOV: 160°
Antenna Specifications
Polarization: LHCP
Bandwidth: 5600MHz-6000MHz.
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15x45mm (without cable）
Weight: 2g
Includes
USB transfer extension cable X1
4 Pin silicone cable X1
M2x4mm screws X8
M2x5mm screws X4
M2x6mm screws X4
M2x14mm screws X4
M2x5x0.5mm gasket X4
Spare replacement lens for Walksnail Avatar Nano & Micro Cameras.Available in 9cm and 14cm. The 14cm includes a micro camera back case.
Check out all of our Walksnail HD products and FPV Goggles & Accessories at RDQ!
Includes
1x Walksnail Avatar Coaxial Cable
Spare replacement power cable for use with Walksnail Avatar VTXs.
Check out all of our Walksnail HD products and FPV Goggles & Accessories!
Includes
1x Walksnail Avatar Replacement VTX Power Cable
