ARA390211IC, Arrma BLX185 Brushless 6S ESC (IC5)
This is the Arrma BLX185 Brushless 6S ESC, a waterproof 150A ESC that provides consistent power control and is fitted with the reliable IC5 connector. The built in cooling fan provides reduced heat during intense driving action and the over voltage protection and two-stage lipo cut off gives added cell management. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Features:
3S, 4S and 6S LiPo Compatibility
150A Power
Waterproof
Fitted with IC5
Recommended battery specification: 5000mAh - 35C minimum - Per battery pack
This product was added to our catalog on August 1, 2021
ARA390229, ARAM0085 BLX85 Brushless ESC
Features
Waterproof ESC and power switch for rugged reliability in all conditions - Integrated heatsink for reduced heat during extreme running - 6.0V BEC - 60A continuous, 420A burst current capability - Simple, single button set up - Forward, brake, reverse throttle modes - User programmable function - LiPo or NiMh modes - Over current protection - BEC overload protection - LiPo and NiMh cutoff to protect your batteries - 5000kV Motor limit
This product was added to our catalog on October 29, 2024
ARAM2000, AR390211 BLX185 6S ESC
Product Details
The BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.Recommended battery specification: 5000mAh - 35C minimum - Per battery pack
3S, 4S and 6S LiPo Compatibility
AXI31620, Axial AE-6 ESC/Rx Combo
The Axial AE-6 ESC/Rx is a replacement ESC/Receiver Combo intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one ESC/Receiver Combo.NOTE: This ESC/Receiver is not compatible with the Axial SCX24 AXI00002V2T1 & AXI00002V2T2 models.
This product was added to our catalog on June 5, 2021
CEGCQ0801, CEN 40 Amp Waterproof Brushed Hobbywing ESC
CEN Racing 40 Amp Waterproof Brushed Hobbywing ESC. This WP-1040 ESC is designed and produced by Hobbywing for the CEN Racing Fiat Abarth, Ford B50, Ford F450 and Suzuki Jimny models. Featuring a power switch, standard brushed motor connectors and a pre-soldered T-style connector. Package includes one brushed ESC.
This product was added to our catalog on October 14, 2021
COR54001, Corally CORA 40-Brushed ESC, 2-3S: SP Versions
Max. Cont. Current (A): Forward: 40 A / Reverse: 20 A
Motor Limit: 2S = 12T 3S = 18T
Input Voltage (V) min. - max.: 5-12.6 V
Max. Current (A): Forward: 180 A / Reverse: 90 A
Resistance: Forward: 0.002 Ohn / Reverse: 0.004 Ohm
Length (mm): 46.5 mm
Nr of Li-xx Cells: 2-3S
Width (mm): 34 mm
Nr of Ni-xx Cells: 5-9 Cell NiMH
Motor Type: Brushed
Height (mm): 28.5 mm
BEC Voltage (V): 6 V
BEC Current (A): 2 A
Weight incl. wire (g): 65 g
Programmable: Jumper
Throttle Mode: Forward / Reverse programmable Reverse lockout
Battery Mode: NiMH / LiPo
Cut off voltage: NiMH mode = 4.5 V
Lipo Cut off: 2S = 6.5 V 3S = 9.75 V
Thermal Protection Temperature: 105 Degrees C
Water Protection: Yes
Connector (Motor): 4 mm
Connector (Battery): Tamiya style
Motor wire size: 16 AWG
Battery wire size: 16 AWG
Car Type Use: 1/10th scale
This product was added to our catalog on January 18, 2022
CSE010-0115-00, Castle Creations Sidewinder 3 Waterproof 1/10 Sport ESC
This is the Castle Creations Sidewinder 3 Waterproof 1/10 Sport ESC. Castle’s Sidewinder ESC is now waterproof! The Sidewinder 3 can power crawlers on water filled trails, AWD's in rain soaked parking lots, and SCT's on adventures through muddy fields. Drivers can now give in to those irresistible urges to drive in the mud or rip through puddles without damaging their ESC.Designed for 1/10thThe Sidewinder 3 is a great fit for 1/10th off-road, on-road, and rock crawlers running up to 3S LiPo. It features updated circuitry for faster response time and improved reliability. As always, the Sidewinder 3 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (sold separately).Amazing PriceThe Sidewinder 3 offers world class performance at an entry level price.Legal mumbo jumboAlthough Sidewinder 3 and Castle brushless motors are waterproof, always rinse the ESC and motor with fresh water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servo, radio and chassis, are also waterproof before exposing them to liquids of any kind.
Specifications:
Input Voltage: MIN: 2s LiPo; MAX: 3s LiPo
BEC: 5.0V, 2A
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes - with lockout
Size (LxWxH): 1.93x1.48x0.79" (49x38x20mm)
Weight (w/127mm long battery wires and no battery connector): 1.96 oz (55.5g)
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
This product was added to our catalog on January 20,2024
CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC
The Castle Creations Mamba Monster X 8S 1/6 Brushless ESC features CRYO-DRIVE™ - Castle’s latest break-through technology. CRYO-DRIVE minimizes the amount of time the ESC’s electrical components spend generating heat. This proprietary software advancement works in parallel with a unique open housing design and a forged elliptical fin heatsink to allow increased directional airflow to cool critical components. Combine this with a high speed 40mm fan and you have a design that maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling.
Mamba Monster X 8S is designed for 1/6 scale vehicles weighing up to 25 lbs. with up to 8S LiPo.
Compatible models include the Traxxas X-Maxx & Unlimited Desert Racer; Arrma Kraton 8s & Limitless; Losi Super Rock Rey & Audi R8; Redcat Shredder.
Features:
Input voltage range 2S-8S LiPo
Sensored, Sensorless and SmartSense™ running modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
Premium forged heatsink with elliptical fins for superior airflow and increased heat dissipation
Oversized factory equipped thermally controlled 40mm fan ? Waterproof design for all weather conditions
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer
Data-logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for “on the-fly” adjustments using your transmitter
Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff
Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1 year warranty
Specifications:
Application guidelines: 1:6 scale RC hobby vehicles weighing up to 25 lbs
Running Modes: Sensored, Sensorless and SmartSense™ (when paired with a Castle 4-POLE 12SLOT sensored motor)
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V
Operating environment: Waterproof design enables use in nearly any environment
Brake: Proportional
Reversible: Yes, but may be disabled for racing
On /off switch: Yes, waterproof
Cooling fan: Yes, factory equipped (40mm), fully removable (See Product Use Statements for more info)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (w/wires): 5.75 oz. (163 grams)
Connector type: 6.5mm female bullets for motor connection
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
This product was added to our catalog on May 14, 2021
CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV)
The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 2028 Sensored Motor is a great way to take your build to the next level with Castle’s cutting edge sensored large scale brushless power. The MAMBA MONSTER X 8S COMBO is ready to power any R/C vehicle weighing up to 25lbs, and running all the way up to 8S LiPo. This motor and ESC combo is designed for heavy, high speed rigs, and you'll experience smooth low-end control, without sacrificing power, punch, or speed.
The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology, CRYO-DRIVE. By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level.
The ESC was designed with a robust aluminum casing, and the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a beast, ready to take on the harshest of environments and still perform. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.
When paired with the Castle sensored 2028-800KV motor, users with heavy, high power rigs will experience controllable low-end control without sacrificing power, punch or speed. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs.
NOTE: This is not a direct replacement to the Mamba XLX. The XLX still handles rawer full throttle power in the most extreme setups.
Features:
ESC:
Input Voltage Range 2S-8S LiPo
Sensorless, Sensored and SmartSense™ Running Modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
Oversized factory equipped thermally controlled 40MM cooling fan
Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
Waterproof design for all weather conditions
Data logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
Motor:
The 2028 Extreme can easily run in the 10 horsepower range (Burst power output for duration's typical of vehicle acceleration.)
Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode.
High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions.
Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible.
Proprietary winding techniques allow Castle Creations to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor.
Dual sensor ports to ensure optimal installation in your large-scale vehicle.
Updated modern and sleek design that looks as cool as it performs.
Specifications:
ESC:
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (40MM), fully removable** (See Product Use Statements below)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (with no battery connector): 5.75 oz. (163 grams)
Connectors: 6.5mm female bullets for motor connection
Motor:
Input Voltage Range: 12S MAX
Kv: 800
Max. RPM: 45,000
Minimum Input Voltage: 3S
Maximum Input Voltage: 12S
Sensored Capable: Yes
Can Length: 4.4" (113.2mm)
Can Diameter: 2.2" (57mm)
Weight (w/wires): 44 oz./1.25kg
Shaft Size: Length: 30mm
Diameter: 8mm
Mounting Hole Specifications: 4mm holes @ 30mm spacing.
Cooling Fan: Available, but not included. See 011-0019-00 here.
Connectors: 8.0mm male connectors
Recommended ESC: Mamba XL X
Running modes: Sensorless and Sensored
Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 25lbs. 2WD vehicles weighing less than 30lbs.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. Castle recommends using 50C continuous discharge or higher LiPo batteries.
Surge ratings should never be used to determine a pack’s suitability for a brushless application.
Castle recommends a high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors.
Applying voltages higher than 33.6V will cause irreparable damage to ESC.
Although Mamba Monster X 8S is waterproof, it is NOT intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt.
The cooling fan must be removed prior to driving in wet conditions. *Fan is not waterproof.
Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the motor or ESC.
The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the Running & Maintaining document in the resources tab above for info on running and maintaining motors in wet environments.
Application Guidelines: Mamba Monster X 8S and 2028-800Kv motor is intended for use in 1:6 scale vehicles weighing up to 25 lbs. and up to 8S LiPo. Vehicle Examples: Traxxas™ X-Maxx & Unlimited Desert Racer; Arrma™ Kraton 8s & Limitless; Losi™ Super Rock Rey & Audi R8; Redcat™ Shredder (optional motor mount and modifications may be necessary to install motor).
Includes:
Mamba Monster X 8S ESC
4-POLE Sensored 2028-800KV Motor
Castle Sensor Harness Adapter (installed)
250mm Sensor Wire
Mamba Decals
Coupon for free Castle Link USB
ESC Quick Start Guide
Motor Quick Start Guide
This product was added to our catalog on April 4, 2021
CSE010-0166-09, Castle Creations Copperhead 10 Waterproof 1/10 Sensored Combo w/1412 (3200Kv) (SCT Edition)
The Castle Creations Copperhead 10 1/10 Sensored "SCT Edition" Combo provides 1/10 scale enthusiasts of all disciplines with a powerful and performance driven ESC that is packed with features. The Copperhead 10 is an affordable option that sits directly in the middle of the Sidewinder 4 entry-level upgrade ESC and the extreme performance MAMBA X option. The Copperhead 10 utilizes CRYO-DRIVE technology, sensored motor support and data logging to deliver Castle’s signature performance and reliability. Whether crawling the rocks, bashing in the backyard or ripping up the local skatepark, Copperhead 10’s versatility will appeal to a wide variety of 1/10 scale enthusiasts.Castle Creations 1412-3200kv Sensored 4-Pole Brushless Motors combine rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, predictable power delivery, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1412 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for.
NOTE: Not compatible with Castle Field Link program card (CSE010-0063-00).
Features:
CRYO-DRIVE™: CRYO-DRIVE™ technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. COOLER TEMPS mean LONGER RUNS and MORE POWER in a COPPERHEAD 10 setup.
DATA LOGGING LITE: Battery Voltage, Battery Ripple, Controller Temperature, Motor RPM and Motor Temperature data points can be captured, downloaded and analyzed via Castle Link software. While not a full version of Data Logging capabilities that the MAMBA X EXTREME 1:10 SCALE ESC has, these critical parameters are excellent sources of information for maximizing performance and battery life of the COPPERHEAD 10.
SMARTSENSE™ TECHNOLOGY: SMARTSENSE uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. (Requires use of Castle brushless motor to utilize)
INTERNAL BEC (Battery Eliminator Circuit): COPPERHEAD 10 features a selectable 5.5V or 7.5V (6A peak) internal BEC to supply power to many of today’s high-torque servos, without requiring the use of an external BEC.
DUAL USE FAN GUARD: For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection.
APPLICATION SPECIFIC MOTOR COMBOS: Available with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck (Motor not included).
WARRANTY: The COPPERHEAD10 is proudly designed and manufactured in Olathe, Kansas USA and backed by the Castle Creations one-year warranty.
FULLY PROGRAMMABLE: Complete Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or wirelessly with the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (B-Link not included).
TELEMETRY LINK CAPABLE: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX
Specifications:
ESC:
Recommended Motors: Castle 1406, 1410, 1412 and 1415 Series Sensored 4-Pole Brushless Motors
Running Modes: SMARTSENSE™, Sensored Only and Brushed motor operation
Input Voltage Range: 2s-4s (16.8V)
BEC Specifications: Selectable: 5.5V or 7.5V (6A peak)
Operating Environment: Waterproof design, potted in durable injection molded case, allows or use in nearly any environment.
Data Logging: Yes, Data Log Lite with 5 data points. Sample frequency of 1 and 5 per second.
Connector Type: 4mm female bullets for motor connection
On/Off Switch: Yes
Cooling Fan: 30mm removable fan included, operates from start up. Purchase also includes a dual use fan guard for use without fan.
Size: 2.19x1.39x1.33" (L x W x H with fan)
Weight: 70.9 g / 2.50 oz. (with fan)
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.
Motor:
Model: 1412-3200Kv
Input Voltage Range: 2s-4s
Kv: 3200
Max. RPM: 100,000
Length: 62.5mm
Diameter: 36mm
Shaft Size: 15mm x 1/8" (3.17mm)
Weight (w/wires): 265.4g (9.4oz)
Mounting Hole: M3 @ 25mm
Connectors: 4mm male Castle Bullet Connectors
Application Guidelines: 2s-4s on 2WD/4WD SC Trucks
Max. Recommended Vehicle Weight: Vehicles weighing up to 6.5 lbs. ready-to-run
Needed to Complete:
Battery Connector - Castle 4mm polarized connectors, XT60, Dean's Ultra Plug, or Traxxas Power Connector recommended.
Product Use Statements:
Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt.
Remove cooling fan prior to driving in wet conditions, it is not waterproof.
This product was added to our catalog on October 29, 2024
CSE010-0167-01, Castle Creations Mamba XLX 2 1/5 Sensored Brushless ESC/Motor Combo (800Kv) w/2028 Motor
The Castle Creations Mamba XLX 2 1/5 Scale Sensored Brushless ESC/Motor Combo with 2028 800Kv motor is a product guaranteed to redefine the limits of large scale R/C. Though it shares the name of its predecessor, the Mamba XLX, this is an ESC that lives in a class of its own.
Reengineered from the ground up, the Mamba XLX 2 is packed with a potent combination of design, hardware and software advancements that will set a new standard for large-scale power systems. Designed for 1/5 Scale models weighing up to 42 lbs, the XLX 2 is an incredible power upgrade for the Losi DBXL-E and Super Rock Rey, Arrma Kraton 8S and Outcast 8S, or Traxxas X-Maxx models! If you are looking for the ultimate upgrade for your speed run, drag racing or off road rigs - the XLX 2 is a true heavyweight, with no contenders.
CRYO-DRIVE: MORE POWER – COOLER TEMPS – LONGER RUNS
Castle’s latest break-through technology, minimizes the amount of time the ESC’s electrical components spend generating heat. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 50mm fan and a forged elliptical fin heatsink, the design maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling.
NOTE: Some vehicles may require aftermarket parts to allow ESC and/or motor fitment.
Features:
Sensored, Sensorless and SmartSense™ running modes
Powerful Integrated 20A Peak Adjustable BEC (5.25V-8.0V)
Premium forged heatsink with for superior airflow and increased heat dissipation
Oversized factory equipped thermally controlled 50mm fan
Waterproof design for all weather conditions.
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer
Data-logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for “on the-fly” adjustments using your transmitter
Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff
Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options.
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store.
Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1-year warranty
Specifications:
ESC:
Input voltage range: 3S-8S LiPo
Length: 3.98” (101.2mm)
Width: 2.49” (63.3mm)
Height: 2.2” (55.8mm)
On/Off Switch: Yes, waterproof*
Cooling Fan: Yes, thermally controlled factory equipped (50mm) fully removable**
Weight: 13.1 oz (371g)
Running Modes: Sensored, Brushed, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. (Dust cover included in package for non-sensored operation)
Wire Gauge: 8AWG
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX, T7PXR Transmitters.
Items Needed: Battery connectors designed for 150+ amps continuous, such as Castle 6.5mm polarized or CC BULLET 8.0MM
Motor:
Application Guidelines: 1:5th Scale vehicles weighing up to 30 lbs.
Vehicle Examples: Losi DB XL-E,™ Losi Super Rock Rey™, Arrma Kraton 8s™, Arrma Outcast 8s™, Traxxas X-Maxx™ (Some vehicles may require aftermarket parts to allow ESC and/or motor fitment)
Input Voltage Range: MIN: 3S LiPo, MAX: 8S LiPo 33.6V
Kv: 800Kv
Max. RPM: 45,000
Diameter: 2.22” (56.3mm)
Length: 4.44” (112.7mm)
Shaft Size: 30mm (Length), 8mm (Diameter)
Weight (w/wires): 44 oz./1.25kg
Mounting Hole Specifications: Holes: 4mm, Spacing: 30mm
Connectors: 8.0mm male connectors, 300mm Direct Connect Sensor Wire
Includes:
Mamba XLX2 ESC
2028-800kv Sensored Brushless Motor
300mm Direct Connect Sensor Wire
Mamba Decals
Mamba XLX2 Quick Start Guide
Sensor port dust cover
Coupon for free Castle Link USB
This product was added to our catalog on October 12, 2021
CSE010-0176-00, Castle Creations Sidewinder Nano Micro Brushless/Brushed ESC (12.6V)
Castle Creations Sidewinder Nano Micro Brushless/Brushed ESC (12.6V). A performance upgrade solution to the ever-growing micro-scale scene in R/C! Capable of running on 2-3S (7.4 - 11.1 Volts) LiPo batteries, this Sidewinder Nano is intended for 1/24 and 1/18 scale RTR (Ready-To-Run) and kit platforms to provide precise throttle control, supreme power-punch, tuneable parameters and unmatched durability and reliability!
The Sidewinder Nano comes equipped with Castle Creations proprietary CRYO-DRIVE Technology resulting in improved thermal performance during partial throttle operation where the majority of driving occurs, resulting in extremely efficient output and reducing stress on the ESC. In addition, the Sidewinder Nano can also be “tuned” for the drivers’ preferences using a Windows based PC and a Castle Link USB adapter (CSE011-0119-00 - sold separately), or with a mobile device using a Castle B-Link Adapter (CSE011-0135-00 - sold separately), allowing tuning and switching parameters to conveniently be done on the fly!
Ideal for:
1/24 2WD or 4WD vehicles up to 1lbs
1/24 and 1/18 crawlers up 2.25lbs (No rock racing/Hill climbing)
Features:
Perfect fit and upgrade for most 1/24 and 1/18 micro platforms
Selectable brushless or brushed
CRYO-DRIVE technology
Castle B-Link adapter compatible
Tune-able parameters
Extremely lightweight and compact
Specifications:
Application: 1/24 and 1/18 scale 2WD or 4WD
Type: Sensorless Brushless/Brushed
Input Voltage: 2-3S (7.4-11.1V) LiPo
Continuous Current: -
Burst Current: -
BEC Voltage: 5A Peak
Input Lead: -
Motor Leads: -
Programmable: Yes
Includes:
(1) Castle Creations Sidewinder Nano Micro ESC
This product was added to our catalog on September 9/2024
CSE010016001, Castle Creations Mamba X SCT 1/10 Brushless Combo w/1415 Sensored Motor (2400kV) (5mm Shaft)
The Castle Creations Mamba X SCT Waterproof 1/10 Brushless Combo includes the Mamba X, with the awesome 1415 Sensored motor to create a all in one system perfect for 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo.
The Mamba X is going to shake things up. Extremely versatile, and capable of powering a wide variety of applications and vehicles the Mamba X is ideal for racing at the track with your 2wd buggy, bashing through mud puddles in your monster truck, or navigating a hardcore trail with your crawler. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies.
Castle Creations 1415 Sensored 4-Pole Brushless Motors combine rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, predictable power delivery, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for.
Features:
ESC
Wide 2S to 6S input voltage range
Sensored Motor Support (Castle X-Series Sensor Harness Included)
Waterproof
8A Adjustable BEC (5.25V-8.0V)
Data-logging
Rugged CNC Aluminum Case
Castle Link Programming Support
SmartSense™
Integrated Capacitors
Removable 30mm Cooling Fan
Integrated 4mm Bullet Connectors
12 AWG Power Wires
Waterproof Switch
Audible Alerts
The Mamba X is proudly designed and manufactured in Olathe, Kansas
Backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support
Motor
4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT
Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering
QUIETSENSE™ Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times
HIGHER PRECISION and MORE EFFICIENT startups
OPTIMIZED design eliminates the need for mechanical timing adjustments
Sensor alignment method delivers uniform timing and torque in both directions, automatically
REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft
ROAR standard sensor port and labeled connections
High strength 180°C neodymium sintered magnets
High quality, temperature-stabilized sensors
High-purity, high-temperature copper windings
Hardened stainless steel shaft
13 AWG high strand wire with silicone insulation
Kevlar wrapped rotor
6061-T6 Billet aluminum heatsink can
High RPM NMB oversized bearings
High quality 0.2mm steel laminations
Low resistance gold plated bullet connectors
Specifications:
ESC
Input Voltage Range: 2S LiPo (7.4V) to 6S LiPo (25.2V)
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)
Size (LxWxH): 2.14x1.39x1.18" (54.4x35.2x30.0mm)
Weight (with wires): 3.56 oz. (101g)
Connectors: 4.0mm female bullets for motor connection.
Items Needed for Operation: Battery Connector
Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg
Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors
Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run
Telemetry Link Capable: Yes
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
Motor
Input Voltage Range: 3-4S LiPo
Kv: 2400
Max. RPM: 75,000
Length: 69.5mm
Diameter: 36mm
Weight (w/wires): 319g / 11.3oz
Shaft Length: 21mm
Shaft Diameter: 0.197" (5mm)
Mounting Hole: M3 @ 25mm
Cooling Fan: Optional, coming soon!
Connectors: 4mm male Castle Bullet Connectors
Recommended ESC (s): Combo includes Mamba X ESC.
Recommended Applications: 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo with included 1415 - 2400kv sensored motor.
Running Modes: SMARTSENSE™, Sensored, Sensorless
Product Use Statements:
*Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Tech Notes:
Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
Applying voltages higher than 25.2V will cause irreparable damage to ESC.
We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs
This product was added to our catalog on February 16, 2021
CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV)
COMPATIBILITY:
Arrma Felony 6S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Limitless
Arrma Outcast 8S BLX
The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before.
Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine!
When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs.
Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles.
Features:
ESC:
Input Voltage Range 2S-8S LiPo
Sensorless, Sensored and SmartSense™ Running Modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
Oversized factory equipped thermally controlled 40MM cooling fan
Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
Waterproof design for all weather conditions
Data logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
Motor:
4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat
Proprietary stator winding produces low internal resistance for a cooler running motor
Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life
High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs
Specifications:
ESC:
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (with no battery connector): 5.75 oz. (163 grams)
Connectors: 6.5mm female bullets for motor connection.
Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
Motor:
Input Voltage Range: 3S-8S LiPo
Kv: 1650
Max. RPM: 56,000
Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm)
Weight (w/wires): 21.08oz. /597.6g
Shaft Diameter: 5mm
Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter
Cooling Fan: Not available
Connectors: 6.5mm male connectors
Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo. Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™
ESC Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries.
Surge ratings should never be used to determine a pack’s suitability for a brushless application.
Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors.
Applying voltages higher than 33.6V will cause irreparable damage to ESC.
Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt.
The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Tech Notes:
This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo.
Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Includes:
Mamba Monster X 8S ESC
4-POLE Sensored 1717-1650KV Motor
Castle Sensor Harness Adapter
200mm Sensor Wire
Mamba Decals
Coupon for free Castle Link USB
ESC Quick Start Guide
Motor Quick Start Guide
This product was added to our catalog on June 23, 2021
CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter
The Castle Creations Castle Link contains a proprietary interface adapter and standard USB cable that will give you in depth access to the programmable parameters of your Castle Creations ESC. All you need is an available USB port on your PC.
Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.
Set up of programmable options with point and click ease
View your current program settings
Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more
Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more
Download new software updates as they become available
Simple programming interface featuring:
All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs).
Demo Mode allows users to check available settings without connecting their Castle device to the computer
Simple to install software
Expanded programming and parameters for all Castle ESCs
Set-up instructions:
Download the interface software.
Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit.
Connect the USB cable to your PC.
System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.
Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
This product was added to our catalog on August 31, 2021
CSE011-0135-00, Castle Creations B Link Bluetooth Adapter
The Castle Creations B Link Bluetooth Adapter gives you access to powerful Castle Link ESC tuning features right from your iOS or Android smartphone! Castle Link is an essential component of customization for all Castle ESCs. While the controllers are plug and play, the benefits of fine tuning your Castle ESC through the Castle Link Programming Suite have only reinforced the sophistication and value of the Castle product line. Not only do you get the ability to adjust many variables to enhance your experience, you have the assurance that firmware updates for future features and improvements for your controller are provided at no cost to you.
Discover just how easily and quickly you can reign in tuning with the release of the Castle B•LINK BLUETOOTH ADAPTER, which will allow most Castle Link compatible products to be programmed via Bluetooth enabled mobile devices using the free application, with firmware updating to be added soon.
CASTLE LINK APP FEATURES:The Castle Link App contains all of the same tuning options as the Castle Link USB Programming Suite used on a Windows compatible PC, now with even greater flexibility.
NOTE:
All current Castle Creations ESCs, many older units and the BEC 2.0 and BEC Pro are supported, for a complete listing of compatible ESCs and accessories please view the PDF file in the resources tab above.
App available for free at the Apple App Store and Google Play.
Features:
WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware.
DATA LOG VIEWING allows the user to view and download data logs wirelessly, giving you the information needed to fine tune your setup.
COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight.
CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models.
FREE APP DOWNLOAD is readily available in the Apple App Store or Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data.
EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models.
PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings.
SYNC information between multiple devices by creating a free account (requires internet connection to sync database).
Specifications:
Input Voltage: Minimum: 4.5V - Maximum: 13V
Max Continuous Current: 10A
Maximum Burst Current: 20A
Dimensions (with wires): 7.25" x 0.81" x 0.27" (184.15mm x 20.55mm x 0.27"mm)
Dimensions (w/o wires): 1.20" x 0.81" x 0.27" (30.48mm x 20.55mm x 0.27"mm)
Weight: 6.62gm / 0.015lbs
Needed for Operation: Castle Link App found at Apple Store or Google Play.
This product was added to our catalog on May 1, 2021
Product Specifications
Auto Cutoff
Yes
Battery Input Lead
16AWG, 4.53 in (115mm)
BEC
Yes
BEC Continuous Current
2A
BEC Type
Linear
BEC Voltage
5V
Brakes
Yes
Connector Type
EC3
Drive Type
Forward/Brake/Reverse
Forward
Yes
Input Voltage
2S Lipo, 5-7 cells NiMH/NiCd
Low-Voltage Cutoff Programmable
Yes
Motor Type
Brushed
Resistance
.0008 ohms
Reverse
Yes
Time Delay Brake
Yes
DYNM3870, Dynamite 90A Brushless Waterproof Marine ESC (2-4S)
This is the Dynamite 90A Brushless Waterproof Marine ESC.
Features:
90A continuous current
2-4S compatible
Fully programmable
Waterproof and water cooled
Single EC3 connector
This product was added to our catalog on February 14, 2022
ELCNITRIDE110, Elceram Nitride 1/10 Brushless ESC w/LCD Display
Features:
A color display with Thin-Film-Transistor (TFT) LCD (Liquid-Crystal Display) technology, with a resolution of 160x80 pixels.
Self-diagnostic before the race: motor temperature, sensor cable, battery
Post-race data evaluation
Race data logging
Fully programmable all through the ESC without the need for a program card or wireless module
Realtime Data monitoring of the battery voltage, ESC, and motor temperatures
Advanced Aluminum Nitride Ceramic Cooling Technology
Extremely low internal resistance based on silver conductive layer
70% weight bias at the bottom of the esc
32-Bit MCU
13AWG Wires
This product was added to our catalog on November 12, 2023
HADMCL2017, Maclan DRK 160 RS Edition ESC
There are a few options to program the DRK 160 ESC.
Use a ProLink (with cables included in the ProLink, micro USB + OTG cable)
Use a Windows PC and Maclan Panel Software (with cable included in the ESC)
Use an Android mobile device (5.0 OS or higher) and Maclan Smart Link App (with Type C cable, sold separately).
Use an Apple iPhone with Maclan WiFi module (sold separately) with Maclan Smart Link App
Includes:
DRK 160 RS Edition ESC x1, 20cm receiver cable (MCL4243) x1, ESC power switch (MCL4242) x1, USB data cable (MCL4054) x1, Maclan decal x1
Features:
Proprietary 7-Stage launch power control software.
All new profiles designed for NPRC Real Street Class.
Factory pre-soldered 10AWG wires with DRK Super Capacitor module.
Fanless design (You do not need to install the cooling fan).
This item was added to our catalog August 22, 2024
Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller
Features:
Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors).
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs).
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately)
Specifications:
Application: 1/10th drift car
Cont./Peak Current: 100A/800A
Input Voltage: 2S LiPo/4-6S NiMH
BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
Wires & Connectors: 13AWG 200mm
Programming device: LCD program box, OTA programmer (Available through Firmware update)
Firmware: LCD Program box via USB software (PC only), OTA (iOS / Android)
Size & Weight: 40.7x35.0x32.0mm (w/Fan)
Weight: 95g (w/ wires)
Motor Limit: 2S LiPo/6S NiMH ?8.5T
Includes:
(1) XD10 PRO ESC
(2) Input wires & (3) Output wires (PRE-SOLDERED)
(1) cooling fan
Decals
Bonus parts: heat tubes, double tape, nylon cable zap traps
This product was added to our catalog on May 3, 2023
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore applications. With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways, and powering through the bumpiest terrian. The MAX10 SCT features an electronic switch with a lifespan of over 50000 on/off cycles,
housed in a completely waterproof, dust-prood and shock-resistant design.
Features:
Cont./Peak Current: 120A/760A
Input: 2-4S LiPo/6-12 Cells NiMH
BEC Output - Switch Mode: 6V/7.4V,3A
Size: 49.0x39.5x34.7mm
Weight: 105g
KV Rating: 2S LiPo: up to 6000KV, 3S LiPo: up to 4000KV, 4S LiPo: up to 3000KV (36XX Series of Motors)
Ezrun Max8 G2 ESC with XT90 Plug
Efficient cooling systemThe frameless fan design is a patented technology.The rapid transmission of internal heat to theintegrated housing radiator are made up of highairflow from the side of the fan and a copper thermalconduction sink on the internal power plate. Theseare built into high-reliability thermal systems toensure that it is always in good thermal condition.1/8thBrushless System Turbo TechnologyThe current brushless system is best paired with the EzRun 4278/4268SD G2 to achieve the maximum performance.The turbo parameter is adjustable from up to 32 degrees and the speed is significantly increased by up to 25%.Capacitor Thermal ProtectionCapacitor thermal protection implemented by the ESC willirreversible damage to the ESC due to overload.Super Internal BECThe built-in switch mode BEC with a maximum output of 15Aand voltage adjustable from 6V to 8.4V (step:0.1V) allowsthe use of various standard servos, high voltage servos.Built-in Big CapacitorThe ESC has three built-in 680uF capacitors, which increasesthe performance by 74% (870uF) compared to the MAX8 ESC.The ultra-large capacitors built onto the ESC also ensuresusers do not need to install external capacitors on their vehicles.Real-time data & data logging function,easy to get the power running status.After connecting the OTA module box, turn on real-time data recordingfunction to access the operating status.
New sensored cable interfaceThe Max8 G2 ESC is equipped with a new type of sensored cable interface.It is high recommended to use the motors from Hobbywing as the waterproof protection level is at the highest level (IP67).
Features:
The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice, and snow, water accumulation.
Built-in ultra-powerful switch mode BEC with a continuous current of 6A, an instant 15A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
Equipped with the most advanced and safe electronic switches. The traditional mechanical switch protects and prevent dust, humid and other harsh environments, contact rust, and violent impact (such as flying slope landing) caused by the automatic closure of mechanical switches and other issues.
Support the 32 degree turbo timing setting. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%, easily win your rival. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection.
Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
Scale Vehicles 1/8th
Cont./Peak 160A / 1050A
Sensored and sensorless brushless motor
Waterproof
HWI30104002, Hobbywing EZRun Max4 HV 1/5 Scale Sensored Brushless ESC
The Hobbywing EZRun Max4 HV 1/5 Scale Sensored Brushless ESC is the most advanced high voltage ESC on the market. It’s dynamic functionality and 12S specifications meet the needs of power-hungry users. The Max4 HV offers a strong 300A continuous output power with excellent linearity at low speed and offers full-sensored mode operation when combined with a Hobbywing large scale sensored motor.
Features:
Extremely Powerful & Low Temperatures: The internal circuit board of the ESC has been integrated to use copper thermal conduction sink. These are built into high-reliability thermal systems to ensure proper thermal condition while supplying a continuous output current of 300A.
High Reliability & Durability: Max4 HV is the most durable (hardware) and advanced (software) ESC on the market. The ESC is built using the highest quality materials available, to withstand extreme weather and surface conditions. Together with the most advanced software developed by Hobbywing engineers, Hobbywing has created a variety of overload functions to protect the ESC from damage.
Applicable to All Weather Track Conditions: The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
Programming/Upgrading/Data Reading Wirelessly: Using Hobbywing's OTA module and smartphone (with the HOBBYWING HW Link App installed), the user can program parameters, upgrade firmware and relevant data of the ESC.
Real-Time Data & Data Logging: After connecting the OTA module (optional - not included), turn on real-time data recording function to access the operating status.
Capacitor Thermal Protection: Capacitor thermal protection will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.
Superior Built-in BEC: The built-in BEC can support up to 25A maximum output current. The output voltage is switchable between 6V, 7.4V and 8.4V. This ensures that the ESC is able to support demanding high-torque servos.
Built-In Spark-Proof Design: The built-in spark-proof circuitry helps to prevent damage to the battery connectors, as well as physical injury that could be caused by strong electrical sparks when connecting a "high voltage" battery pack (6-12S).
Advanced & Secured Electronic Switch: The advanced and durable electronic switch features a longer lifespan compared to a standard switch. The dust, dirt, and waterproof switch housing ensures reliability, long life and eliminates unwanted damage. Heavy impact or harsh surfaces will not affect the switch.
Sensor Cable Interface: The MAX4 HV ESC is equipped with a proprietary sensor cable interface. It is high recommended to use the motors from Hobbywing as the waterproof protection level is at the highest level (IP67).
Specifications:
Cont./Peak Current: 300A/2000A
Input Voltage: 6-12S Lipo
BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 10A (Switch-mode)
Input Wires: Red-8AWG-200mm*1/Black-8AWG-200mm*1
Output Wires: Not Included
Input Connectors: Not Included
Output Connectors: 8.0mm Gold (female)
Fan Size: 50x50x15mm
Fan Voltage Range: 6-8.4V
Size: 125mmx85mmx61.7mm
Weight: 775.4g
KV Rating/T Count: 12S LiPo: KV ? 600KV(70125 Size Motors)
This product was added to our catalog on May 13, 2022
HWI30105000, Hobbywing EZRun MAX6 V3 1/6 Waterproof Brushless ESC (160A, 3-8S)
This is the Hobbywing EZRun MAX6 V3 1/6 Scale Waterproof Brushless ESC. Compatible with 3-8S LiPo power, the MAX6 is a great choice for 1/6 and 1/7 scale vehicles like the Traxxas XO-1, but is also suitable for various 1/8 scale heavy vehicles like the E-REVO and CEN GST-E Monster Trucks. It's the ideal option for high-end aggressively powered builds.
Features:
High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.
Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.
High Voltage Built-in BEC: The MAX6 has adopted the world's first HV built-in BEC with an output current of up to 25Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today's high voltage servos on demand used by large scale vehicles.
Advanced & Secure Electronic Switch: The MAX6 features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
Regular Firmware Updates Free of Charge: You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it's ESC firmware regularly giving you upgraded features more often when available.
Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces.
Built-in Anti-Spark System: The MAX6 is built wit an internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).
Specifications:
Continuous Current: 160A
Peak Current: 1,050A
Motor Type: Sensorless Brushless Motor
Applications: 1/6th Touring Car, Buggy, Truggy and Truck
Motor Limit: With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor); With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor)
LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller)
Size (LxWxH): 70x56x46.5mm
Weight: 240g
Programming Port: FAN /PRG Port
Includes:
(1) Ezrun MAX6 ESC
(3) 10 AWG, 200C Black wires for a brushless motor
(1) Double side tape
(2) Heat shrink tube
(1) Manual
(1) Hobbywing decal
Recommended Hobbywing Programmers:
HWA30502000014: Hobbywing Multifunction LCD Program Box
HWA86020010: Hobbywing Program Box
This product was added to our catalog on May 20, 2021
HWA30110000B04, QUICRUN WP 16BL30 COMBO (Bundled) - ESC + QR2435 motor G3 (4500kv) + Programmer
ESC + QR 2435 SL 4500kv G3 motor + Programmer
Waterproof, Sensorless system
ESC
Waterproof and dustproof for all-weather.
One-button (the “SET” button on the ESC) sets the ESC. All parameters easily reset to factory default settings.
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit different kinds of models, tires and tracks.
Multiple protections: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection / Motor lock-up protection.
Motor
Cont./Peak Current: 65Ax4/80Ax4
Input Voltage: 2-3S Lipo/6-9 Cell NiMH
BEC Output: 5V&0.6A
Size: 55x42x6.6mm
Weight: 15g
This product was added to our catalog on May 3, 2023
HWA30110000B05, QUICRUN WP 16BL30 COMBO (Bundled) - ESC + QR2435 motor G3 (6500kv) + Programmer
ESC + Quicrun 2435 brushless motor 6500kv + LED program box
Waterproof, Sensorless system
ESC
Waterproof and dustproof for all-weather.
One-button (the “SET” button on the ESC) sets the ESC. All parameters easily reset to factory default settings.
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit different kinds of models, tires and tracks.
Multiple protections: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection / Motor lock-up protection.
Motor
Cont./Peak Current: 65Ax4/80Ax4
Input Voltage: 2-3S Lipo/6-9 Cell NiMH
BEC Output: 5V&0.6A
Size: 55x42x6.6mm
Weight: 15g
This product was added to our catalog on May 3, 2023
HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC
The Hobbywing XERUN XR10 Justock G3 1/10 Sensored Brushless ESC is the next level in zero timing spec racing. The timing in this ESC has been fixed to a permanent 0° to comply with stock class racing. Package includes one Justock ESC.
Features:
Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
Programmable via OTA Bluetooth module or 3in1 program box
Built-in capacitor module eliminates the need for external capacitors and unwanted space
RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
Supports both CCW (counterclockwise) and CW (clockwise) motor directions
Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
Supports ESC firmware upgrades
User-friendly and convenient for set-up
Specifications:
Continuous Current: 60A
Burst Current: 380A
Battery: 2S Lipo (Only 2S)
Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
ESC programming: Independent programming port
Motor Supported: Sensor and sensorless brushless motor
Motor Limit: 10.5T 3650 Motor
Application: 1/10, 1/12 On-road and Off-road
Cooling Fan: Powered by BEC
Size: 40.9x33.9x32.1mm (LxWxH)
Weight: 75.4g (Including weight of wire)
This product was added to our catalog on May 3, 2023
HWA30112401, Hobbywing Xerun XR10 Pro Stock Spec V4 Sensored Brushless ESC
The Hobbywing Xerun XR10 Pro Stock Spec V4 offers the latest in Hobbywing ESC technology, developed and optimized for stock spec class racing. Recommended for on-road and off-road spec racing, this high quality ESC features a tiny 31.5x25.6x16.1mm footprint, a full aluminum case, and 80 amp current delivery with burst up to 380 amps! Other features include 2S LiPo compatibility, and a 6V/3A switch mode BEC.
Specifications:
Current: Continuous: 80A / Burst: 380A
Battery: 5-7 cells NiMH/NiCd / 2S LiPo
Built-in BEC: 6V@3A (switch mode)
Motor Supported: Sensored and sensorless brushless motors
Suitable Motor: 3650 Motors,1/10 Touring Cars ≥10.5T, 1/10 Buggy≥13.5T
Application: STOCK class of 1/10th Touring Car & Buggy Racing
Cooling Fan: 5V - 7.4V (20x20x8mm)
Wires: 14AWG-200mm
Size: 31.5x25.6x16.1mm
Weight: 28g (without wires and cooling fan)
This product was added to our catalog on May 3, 2023
HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth)
The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control.
Hobbywing FFD:
A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs.
PWM Adjustments:
From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition.
Internal BEC:
The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos.
NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended.
Features:
32 Bit, M4 microprocessor for ultimate performance
Frameless fan design for extreme cooling
Reverse polarity protection
Precise adjustments to throttle and brake PWM
Optimized programmable parameters
Extended brake force
Drag Brake Acceleration and Softening Function
High output BEC
Specifications:
Wire gauge: 13 AWG Lightweight Ultra-flex
Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1
Continuous Current: 160A
Peak Current: 1200A
Input Voltage: 2S LiPo / 4-6S Cell NiMH
BEC Output: BEC voltage of 5-7.4V
Programming device: LCD Program Box / OTA Programmer
Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android)
Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud)
Weight: 88g (with wires)
Motor spec recommendation:
Touring Car: >4.5T
Buggy: >5.5T
Includes:
(1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC
(1) Cooling Fan
(1) Capacitors
Decals
Accessory package
This product was added to our catalog on December 14, 2023
HWA30112751, Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC
The Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC is super small in size and at 31.6x25.8x16.2mm size, is 20% smaller than the standard version XeRun XR10 Pro 1S. Plus, the light weight (only 23.5g w/o wires) provides more weight margin when adjusting the balance of the chassis.
Features:
Special Design for Stock 1S Class Racing: Reliable hardware combined with powerful software (contains 5 common select-to-use profiles) provides an ideal power solution for 1/12th Stock 1S class racing
Super Internal BEC: The built-in boost BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows users to use various, servos and receivers (without connecting any extra battery).
Adjustable Throttle & Brake PWM Frequencies: The independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control.
Programming/Upgrading/Data Reading Wirelessly: With Hobbywing's optional "WiFi Express" module (HWA30503000 - not included) and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Built-in Electronic Switch: The internal electronic switch with a lifespan of over 50,000 on/off cycles completely solves the problems like stuck reed, rust contact points, and automatic shutdown that conventional mechanical switches often have.
Data-logging Capability: This ESC features the data-logging function which will record the maximum ESC & motor temperatures, the maximum motor RPM, and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use.
Specifications:
Cont./Peak Current: 80A/380A
Input Voltage: 1S Lipo/3-4 Cell NiMH
BEC Output: 6V/7.4V@3A
Wires: Black-14AWG-200mm
Connectors: No
ESC Programing: LCD Program Box or WiFi Module
Firmware Upgrade Supported: Yes
Size: 31.6x25.8x16.2mm
Weight: 23.5g (w/o Wires)
Applications: Stock 1S class of 1/10th & 1/12th on-road racing.
KV Rating/T Count: ≥10.5T, 3650-size Motor
This product was added to our catalog on May 3, 2023
HWI30120201, Hobbywing Quicrun 1060 1/10 Brushed ESC
Features:
Water-proof and dust-proof, suitable for all weather races.
Small size, with built-in capacitor module.
Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
Great current endurance capability.
Great built-in BEC output capacity.
Automatic throttle range calibration, easy to use.
ESC parameters are easy to set with jumpers.
Multiple protections:
Over Voltage Protection
Low voltage cut-off protection for battery
Over-heating protection
Throttle signal loss protection
Specifications:
Fwd Cont. Current /Peak Current/ Resistance: 60A/360A/0.001?
Rev Cont. Current /Peak Current/ Resistance: 30A/180A/0.002?
Motor Type Supported: Brushed Motor
Application: 1:10 Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Suitable Battery: 2-3S LiPo, 6-9 cell NiMH
Brushed Motor Limit:
2S LiPo or 6 cell NiMH: 540 or 550 Size Motor: ?12T, Or RPM<30000 @7.2V
3S LiPo or 9 cell NiMH: 540 or 550 Size Motor: ?18T, Or RPM< 20000 @7.2V
BEC Output: 2A/5V (Switch Mode)
PWM Frequency: 1KHz
Size/ Weight: 35.5(L)*32.18(W)*18(H) / 39g
Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
Cooling Fan: No need
This product was added to our catalog on May 20, 2021
HWA30501003, Hobbywing LED Program Card
The Hobbywing LED Program Card is used to program Hobbywing ESC's. It features a user friendly interface and is easy to use. Package includes program box and 3-wire male/male plug for hooking the programmer to the ESC.
Compatible With:
Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.)
EzRun series
QuicRun series of brushless car ESCs
Quicrun 1080 & 880 brushed ESC
SeaKing series of brushless boat ESCs
Specifications:
Size: 88x58x14mm
Weight: 40g
Input Voltage: 4.8-6V
NOTE: If the ESC doesn't have a built-in BEC, you will need to use an additional 6.0V battery to supply power to the program box.
This product was added to our catalog on February 3, 2022
HWI30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box
This Hobbywing Multifunction Gen2 LCD Professional Program Box is for programming Hobbywing brushless ESCs. The user friendly LCD interface makes ESC programming quick and easy. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. It is very compact, portable and applicable for field use.
NOTE: A external battery is needed for powering this program box when the ESC has no built-in/external BEC.
Features:
Works with Platinum, XeRun, EzRun, and Seaking series ESCs
Specifications:
Size: 91x51x17mm (LxWxH)
Weight: 65g
Input Voltage: 4.5V—12.6V
Interface: USB C
ESC interface: Futaba plug
Power supply interface: Futaba plug
This product was added to our catalog on June 4, 2021
HWI38010600, Hobbywing EZRun MAX5 V3 Sensorless Brushless ESC & Motor Combo w/56113SL (800kV)
EZRun MAX5 V3 Sensorless Brushless ESC & Motor Combo includes the 56113SL 1/5 scale, 800kV motor and is a great option for high-end, aggressively powered, large scale 8S builds.
Specifications:
Motor:
Model: 56113-800KV
Pole: 4
KV (No-load): 800KV
Resistance: 0.00049 Ω
Current (No-load): 3.2 A
Max. Output Power: 5800 W
Current at the point of M.O.P: 200 A
Motor Diameter: 56mm
Motor Length: 113mm
Shaft Diameter: 8.0mm
Shaft Length: 31.0mm
LiPo Cells: 3-8
Weight: 1210g (42.68oz)
Application: 1/5th RC Vehicles, Truck/Dragster
ESC:
Continuous Current: 200A
Peak Current: 1,300A
Motor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode)
Applications: 1/5th Touring Car, Buggy, Truggy and Truck
Motor Limit: With 8S LiPo/24-Cell NiMH: KV ≤1000 (58110 size motor)
LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller)
Size (LxWxH): 93.35x58.12x47.81mm
Weight: 342g
Programming Port: FAN /PRG Port
This product was added to our catalog on May 4, 2023
HWA38010602, Hobbywing EZRun MAX5 G2 Sensored Brushless ESC & Motor Combo w/56118SD (800kV)
The EZRun MAX5 G2 Sensored Brushless ESC and Motor Combo is a must have for your large scale needs. The Max5 G2 ESC is stacked with fancy features such as the Freewheeling Technology which increases driving efficiency and will in turn lower operating temperatures. The ESC acquired an IP-67 waterproofing rating and high voltage handling capabilities of 44.4V, this combo will have enough power to send your rig to the next ZIP code, the Hobbywing Max5 combo is everything you want and more.
Features:
MAX5 G2 ESC
Enhanced Performance
Intelligent Freewheeling Technology
Turbo Timing Technology
56118SD G2 Motor
4-pole rotor design for more torque with strong explosive force
Detachable motor design for easy maintenance
Waterproof sensor interface
Explosion proof rotors
Spiral CNC shell
Specifications:
ESC:
Scale: 1/5th
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensored
Waterproof: IP-67
Current:
Continuous: 250A
Peak: 1,600A
Input Voltage: 6-12S LiPo
BEC Output: 6V-8.4V
Output Connectors: 8mm Bullet
Dimensions: 3.7x2.3x2.0" (94.5x59.4x50.9mm)
Weight: 15.1oz (428.5g)
Motor:
Input Voltage: 8-12S LiPo
KV: 800kV
Pole: 4
Motor Diameter: 2.20" (56mm)
Motor Length: 4.69" (119.2mm)
Shaft Diameter: 0.31" (8mm)
Shaft Length: 1.18" (30mm)
Front Bearing size: D22*D8*T7
Rear Bearing size: D19*D5*T6
Weight: 45oz (1277g)
Includes:
(1) EZRun MAX5 G2 1/5 Scale Waterproof Brushless ESC
(1) EZRUN 56118SD G2 4-Pole 1/5 Scale Sensored Brushless Motor
