ACV60616, Acuvance Trace Bector BEC
This is the Acuvance Trace Bector BEC. This optional BEC offers large capacity with low resistance and high efficiency. Equipped with an improved circuit design to increase the response speed with better output characteristics, force consistency and stability while cornering. The Trace Bector can be installed between the receiver and ESC, the servo and gyro or both at the same time by installing two BEC units!
This product was added to our catalog on March 7, 2023
DSC-CS3-LF1, DS Racing Competition III Slick Drift Tires (4) (LF-1)
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Features:
Precision made for better tolerances
Includes foam inserts
Specifications:
Width: 25mm
Compounds:
LF-5T - Smooth Asphalt or Terrazzo (Hardest)
LF-4 - Polish Concrete and Carpet (Hard)
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
LF-2 - Tile, Epoxy and Asphalt (Medium-Soft)
LF-1 - Smooth Asphalt, Tile and Epoxy (Soft)
LF-1T - Smooth Asphalt, Tile and Epoxy (Soft)
This product was added to our catalog on May 13, 2022
DSC-CS3-LF2, DS Racing Competition III Slick Drift Tires (4) (LF-2)
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Features:
Precision made for better tolerances
Includes foam inserts
Specifications:
Width: 25mm
Compounds:
LF-5T - Smooth Asphalt or Terrazzo (Hardest)
LF-4 - Polish Concrete and Carpet (Hard)
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
LF-2 - Tile, Epoxy and Asphalt (Medium-Soft)
LF-1 - Smooth Asphalt, Tile and Epoxy (Soft)
LF-1T - Smooth Asphalt, Tile and Epoxy (Soft)
LF-5C - Smooth Carpet (Hardest)
This product was added to our catalog on May 13, 2022
DSC-CS3-LF3, DS Racing Competition III Slick Drift Tires (4) (LF-3)
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Features:
Precision made for better tolerances
Includes foam inserts
Specifications:
Width: 25mm
Compounds:
LF-5T - Smooth Asphalt or Terrazzo (Hardest)
LF-4 - Polish Concrete and Carpet (Hard)
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
LF-2 - Tile, Epoxy and Asphalt (Medium-Soft)
LF-1 - Smooth Asphalt, Tile and Epoxy (Soft)
LF-1T - Smooth Asphalt, Tile and Epoxy (Soft)
LF-5C - Smooth Carpet (Hardest)
This product was added to our catalog on May 13, 2022
DSC-CS3-LF3PK, DS Racing Competition III Slick Drift Tires (Pink) (4) (LF-3)
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available the DS Racing LF-3 Compound making them great for P-Tile, Painted Floor and Epoxy surfaces. Package includes four tires and four foam inserts.Features:
Precision made for better tolerances
Includes foam inserts
Specifications:Width: 25mmCompounds:
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
This product was added to our catalog on May 13, 2022
DSC-DE-202, DS Racing Drift Element 6 Spoke Drift Wheels (Triple White w/Black Rivets) (2) (Adjustable Offset) w/12mm Hex
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 6 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
Specifications:
Scale: 1/10 Drift
Diameter: 2.04" (52mm)
Width: 1.02" (26mm)
Offset: 4-6-8-10-12mm (Changeable)
Includes:
(2) DS Racing Drift Element Wheels
(12) 1.5x8mm Socket Head Screws
This product was added to our catalog on May 13, 2022
DSC-DE-219, DS Racing Drift Element 6 Spoke Drift Wheels (Gunmetal Chrome) (Adjustable Offset) w/12mm Hex
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 6 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
Specifications:
Scale: 1/10 Drift
Diameter: 2.04" (52mm)
Width: 1.02" (26mm)
Offset: 4-6-8-10-12mm (Changeable)
Includes:
(2) DS Racing Drift Element Wheels
(12) 1.5x8mm Socket Head Screws
This product was added to our catalog on May 13, 2022
DSC-DE-220, DS Racing Drift Element 6 Spoke Drift Wheels (Gunmetal w/Black Rivets) (2) (Adjustable Offset) w/12mm Hex
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 6 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
Specifications:
Scale: 1/10 Drift
Diameter: 2.04" (52mm)
Width: 1.02" (26mm)
Offset: 4-6-8-10-12mm (Changeable)
Includes:
(2) DS Racing Drift Element Wheels
(12) 1.5x8mm Socket Head Screws
This product was added to our catalog on May 13, 2022
DSC-LF-3PK, DS Racing Finix Drift Tires (Pink) (4) (LF-3)
The DS Racing Finix Treaded Drift Tires are a great option for both scale realism and performance. These tires are precision made and feature a realistic tread pattern molded into the tire. The tires are molded in the DS Racing LF-3 compound for P-Tile, Painted Floor and Epoxy surfaces. Package includes four tires and four foam inserts.
Features:
Precision made for better tolerances
Realistic tread pattern for added scale realism
Includes foam inserts
Specifications:
Width: 25mm
Compounds:
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
This product was added to our catalog on May 13, 2022
ELCNITRIDE110, Elceram Nitride 1/10 Brushless ESC w/LCD Display
Features:
A color display with Thin-Film-Transistor (TFT) LCD (Liquid-Crystal Display) technology, with a resolution of 160x80 pixels.
Self-diagnostic before the race: motor temperature, sensor cable, battery
Post-race data evaluation
Race data logging
Fully programmable all through the ESC without the need for a program card or wireless module
Realtime Data monitoring of the battery voltage, ESC, and motor temperatures
Advanced Aluminum Nitride Ceramic Cooling Technology
Extremely low internal resistance based on silver conductive layer
70% weight bias at the bottom of the esc
32-Bit MCU
13AWG Wires
This product was added to our catalog on November 12, 2023
Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller
Features:
Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors).
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs).
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately)
Specifications:
Application: 1/10th drift car
Cont./Peak Current: 100A/800A
Input Voltage: 2S LiPo/4-6S NiMH
BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
Wires & Connectors: 13AWG 200mm
Programming device: LCD program box, OTA programmer (Available through Firmware update)
Firmware: LCD Program box via USB software (PC only), OTA (iOS / Android)
Size & Weight: 40.7x35.0x32.0mm (w/Fan)
Weight: 95g (w/ wires)
Motor Limit: 2S LiPo/6S NiMH ?8.5T
Includes:
(1) XD10 PRO ESC
(2) Input wires & (3) Output wires (PRE-SOLDERED)
(1) cooling fan
Decals
Bonus parts: heat tubes, double tape, nylon cable zap traps
This product was added to our catalog on May 3, 2023
HWA30108000, Hobbywing Quicrun 10BL60 Sensored Brushless ESC
Features:
High performance but low price- users can own this reliable race-ready ESC at an affordable cost.
Compact size, suitable for various car chassis.
Auto identification system can recognize sensored or sensorless brushless motors automatically.
Smooth operation and plentiful adjustment options. Suitable for most kinds of competitions.
8 steps of timing adjustment greatly increase the output power of the motor and unlock its maximum potential.
Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment.
9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit various of cars, tires and tracks.
Multiple protections: Low voltage cut-off protection for LiPo or NiMH battery / Over-heating protection / Throttle signal loss protection / Motor Lock-up protection.
One-button sets the ESC. Easily reset all parameters to factory default settings.
Compatible with optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.
Specifications:
Applications: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race
Cont./Peak Current/Resistance: 60A/380A/0.0008?
Motor Type Supported: Sensored / Sensorless Brushless Motor
Car Applicable: 1:10 On-road/Off-road/Buggy/Monster
Motor Limit:
2S LiPo or 4-6 cell NiMH: ?8.5T(1/10 On-road), ?13.5T(1/10 Off-road)*
3S LiPo or 8-9 cell NiMH: ?13.5T(1/10 On-road), ?17.5T(1/10 Off-road)*
Battery: 4-9 cell NiMH, 2-3S LiPo
BEC Output: 6V/2A (Linear Mode)
Size: 33mm(L)*28mm(W)*31.5mm(H, with cooling fan)
Weight: 59g (with wires, without cooling Fan)
External Program Port: Available
*NOTE: Indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs.
This product was added to our catalog on May 3, 2023
HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth)
The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control.
Hobbywing FFD:
A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs.
PWM Adjustments:
From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition.
Internal BEC:
The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos.
NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended.
Features:
32 Bit, M4 microprocessor for ultimate performance
Frameless fan design for extreme cooling
Reverse polarity protection
Precise adjustments to throttle and brake PWM
Optimized programmable parameters
Extended brake force
Drag Brake Acceleration and Softening Function
High output BEC
Specifications:
Wire gauge: 13 AWG Lightweight Ultra-flex
Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1
Continuous Current: 160A
Peak Current: 1200A
Input Voltage: 2S LiPo / 4-6S Cell NiMH
BEC Output: BEC voltage of 5-7.4V
Programming device: LCD Program Box / OTA Programmer
Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android)
Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud)
Weight: 88g (with wires)
Motor spec recommendation:
Touring Car: >4.5T
Buggy: >5.5T
Includes:
(1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC
(1) Cooling Fan
(1) Capacitors
Decals
Accessory package
This product was added to our catalog on December 14, 2023
HWA30401134, Hobbywing Xerun D10 Drift Brushless Motor (10.5T) (Black)
Features:
Designed for Drift: The Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple.
Banana Plug Quick-Swap Design: The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC.
Stator Designed for Drift: The motor stator is optimized for drift and improves motor efficiency in drift applications. Built-in with high-precision sensors board, combined with drift-specific fan rotors, providing excellent motor linearity and drivability while greatly improves motor efficiency.
Lightweight: The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (including 3 gold insert weights). The lightweight motor allows user to easily tweak their weight bias on their car.
Fan Rotor: Providing great heat dissipation, power the special-shaped gold fan on the rotor heats the motor while making a pleasant sound, especially when Turbo is turned on.
Best paired with XD10 PRO ESC
Specifications:
Application: 1/10th Drift car
Input Voltage: 2S Lipo
KV: 4600kv
Rotor: 2 POLE ?7-12.2*24.1-BUT*-L1
Weight: 157
Can Size: 35.7xx52.6mm (1.41x2.07")
Shaft Diameter: 3.175mm (0.125")
Shaft Length: 15.0mm (0.591")
NOTE:
To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices.
The M3 screws with a length (no longer than 7mm) are needed when mounting the motor onto your vehicle.
Please pay attention to the relevant marks (on the ESC) when soldering/connecting those output wires to the motor and make sure that you will strictly follow the wiring order (between the ESC & the motor) of “A-A, B-B, and C-C”.
Please ensure the sensor cable is clean and undamaged when you’re using a sensor ESC. You need to pay attention to the two connectors on the cable when connecting the ESC to the motor.
Re-check all the connections between the ESC & the motor and ensure that they are all correct before turning on the ESC.
Timing Note:
The D10 motors provide a wide range of adjustable mechanical timings, the following are the methods & principles you can follow when adjusting the timing.
You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as needed according to the mark (white lines) at the rear end of the motor and fasten the screw after the adjustment. For obtaining optimal performance, you can change the output range and characteristics of your power system by adjusting the motor timing.
Increasing the timing can increase the motor speed (RPM), while that also increases the motor temperature and reduces the efficiency. A high(er) timing usually requires a high(er) ratio.
Please ensure your ESC is properly programmed before setting the motor timing. For detailed information about ESC programming, please refer to the user manual of the ESC.
After the timing adjustment, please ensure that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the information about the motor temperature via a infra-red temperature gun. If the temperature is too high, please let the motor cool down first and then test again. If the temperature is still too high, then please reduce the timing or increase the FDR (that is to replace the pinion gear with fewer teeth or spur gear with more teeth).
This product was added to our catalog on May 3, 2023
HWA30401139, HobbyWing Xerun D10 Drift Brushless Motor (13.5T) (Purple)
Features:
Designed for Drift: The Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple.
Banana Plug Quick-Swap Design: The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC.
Stator Designed for Drift: The motor stator is optimized for drift and improves motor efficiency in drift applications. Built-in with high-precision sensors board, combined with drift-specific fan rotors, providing excellent motor linearity and drivability while greatly improves motor efficiency.
Lightweight: The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (including 3 gold insert weights). The lightweight motor allows user to easily tweak their weight bias on their car.
Fan Rotor: Providing great heat dissipation, power the special-shaped gold fan on the rotor heats the motor while making a pleasant sound, especially when Turbo is turned on.
Best paired with XD10 PRO ESC
Specifications:
Application: 1/10th Drift car
Input Voltage: 2S Lipo
KV: 2900kv
Rotor: 2 POLE ?5-12.1*24.1-BES*-L3
Weight: 157 / 165
Can Size: 35.7xx52.6mm (1.41x2.07")
Shaft Diameter: 3.175mm (0.125")
Shaft Length: 15.0mm (0.591")
NOTE:
To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices.
The M3 screws with a length (no longer than 7mm) are needed when mounting the motor onto your vehicle.
Please pay attention to the relevant marks (on the ESC) when soldering/connecting those output wires to the motor and make sure that you will strictly follow the wiring order (between the ESC & themotor) of “A-A, B-B, and C-C”.
Please ensure the sensor cable is clean and undamaged when you’re using a sensor ESC. You need to pay attention to the two connectors on the cable when connecting the ESC to the motor.
Re-check all the connections between the ESC & the motor and ensure that they are all correct before turning on the ESC.
Timing Note:
The D10 motors provide a wide range of adjustable mechanical timings, the following are the methods & principles you can follow when adjusting the timing.
You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as needed according to the mark (white lines) at the rear end of the motor and fasten the screw after the adjustment. For obtaining optimal performance, you can change the output range and characteristics of your power system by adjusting the motor timing.
Increasing the timing can increase the motor speed (RPM), while that also increases the motor temperature and reduces the efficiency. A high(er) timing usually requires a high(er) ratio.
Please ensure your ESC is properly programmed before setting the motor timing. For detailed information about ESC programming, please refer to the user manual of the ESC.
After the timing adjustment, please ensure that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the information about the motor temperature via a infra-red temperature gun. If the temperature is too high, please let the motor cool down first and then test again. If the temperature is still too high, then please reduce the timing or increase the FDR (that is to replace the pinion gear with fewer teeth or spur gear with more teeth).
This product was added to our catalog on April 21, 2024
HWA30404307, Hobbywing Quicrun 3650 G2 Sensored Brushless Motor (21.5T)
The Hobbywing Quicrun 3650 G2 Sensored Brushless Motor is a high efficiency option, creating good power, and keeping temps low. Ideal for 1/10th, 1/12th On-road (Race or drift Touring cars, F1, M vehicles and etc.) & Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T,25.5T motors) applications.
Features:
Built-in Hall sensor brings drivers an amazing sense of control.
Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
Dustproof design where motor leads exit.
Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections.
Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor.
Specifications:
Turn: 21.5T
Kv: 1800Kv
LiPo: 2-3S
Shaft Diameter: 3.175mm
Resistance: 0.0747 ohm
No Load Current: 1.3A
Max Output Power: 95W
Max Output Current: 28A
Weight: 186g
This product was added to our catalog on May 3, 2023
HWA30408012, Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motor (21.5T)
The Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motors feature an updated can design over the G2 - and especially G1 - and push the boundaries of an Fixed Timing Motor with lower weight, good heat dissipation and a rebuildable design.
Features:
The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
The motor design is in compliance with IFMAR, and ROAR specifications.
Specifications:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 2050LiPo Cells: 2-3SNo-Load Current(A): 3Outer Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 175g (6.17oz)Timing: FixedApplications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).
This product was added to our catalog on May 3, 2023
HWI30404307, HobbyWing Quicrun 3650 G2 Sensored Brushless Motor (21.5T)
The Hobbywing Quicrun 3650 G2 Sensored Brushless Motor is a high efficiency option, creating good power, and keeping temps low. Ideal for 1/10th, 1/12th On-road (Race or drift Touring cars, F1, M vehicles and etc.) & Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T,25.5T motors) applications.
Features:
Built-in Hall sensor brings drivers an amazing sense of control.
Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
Dustproof design where motor leads exit.
Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections.
Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor.
Specifications:
Turn: 21.5T
Kv: 1800Kv
LiPo: 2-3S
Shaft Diameter: 3.175mm
Resistance: 0.0747 ohm
No Load Current: 1.3A
Max Output Power: 95W
Max Output Current: 28A
Weight: 186g
This product was added to our catalog on April 21, 2024
KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+
Toyota Supra A80 with Kyosho original graphics. Next generation chassis with improved durability, performance, maintenance, and friendly features.
Features:
Fazer Mk2 Chassis FZ02. Shorter wheel wheel-base compared to the FZ02L (Dodge Challenger) chassis. Simple and efficient shaft driven 4WD design with improved performance. Light weight and low CG bathtub style design made of durable glass reinforced 66 nylon material.
Licensed Toyota Supra A80 Body
New wheel design with brake rotor parts!. Also includes 0mm offset rotor hubs (Allowing 190mm width)
Drift Tires
New steering and double wishbone suspension design for superior handling and damping characteristics. Adjustable caster angle(3 settings)
12mm big bore shock
Reliable shaft driven 4WD drivetrain design with slipper clutch
2 bevel gear type diff system on front and rear
Easy gear mesh system
Powerful Kyosho original 550 size 14T brushed motor
Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S Li Po compatible.
High response, high torque KS 4081 04 WP water proof steering servo
New shock design and soft shock spring setup
New RX box to protect from dust and debris
Syncro 2.4GHz KT2 31P Radio system
All hex hardware
Full ball bearings
Specifications:
Length: 455mm
Width: (Body width) 200mm (210mm)
Height: 120mm
Wheelbase: 260mm
Tread Front/Rear: 174mm/174mm
Tires Front/Rear: 64×24.2mm/64×24.2mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
Transmitter: Syncro KT-231P+
Motor: G14L
Includes:
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Installed 60A waterproof ESC (forward/brake/reverse)
Hex wrench
Spanner
Needed to Complete:
Battery for Chassis w/T-Plug Connector
Charger
(4) AA size batteries for transmitter
This product was added to our catalog on October 19, 2021
KYO34472T1, Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R Drift ReadySet w/Syncro KT-231P+
The Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source.
Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.
Features:
“Ultra Scale Body” replicates the fine details of the actual body of the car
LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic
Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis
Full ball bearings that reduce drive loss equipped throughout the drive system
Features KS202W waterproof steering servo
Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces
Shaft drive full-time 4WD touring chassis
Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale
Button head hex screws throughout to simplify maintenance
Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T
Performance can be further enhanced by installing various optional parts
Specifications:
Length: 450mm
Width: 195mm (Body width:200mm)
Height: 136mm
Chassis Height: 8mm (approx.)
Wheelbase: 260mm
Tread (F/R): 167mm
Tires (F/R): 64×27.7mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
R/C System: Syncro KT-231P+
Motor: G14L
Includes:
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Hexagonal wrench
Spanner
Needed to Complete:
(4) AA batteries for transmitter
7.2-7.4V battery w/T-Style plug for chassis
Charger for battery
Tools
This product was added to our catalog on July 19, 2022
KYO34473T1, Kyosho EP Fazer Mk2 FZ02-D 2006 Subaru Impreza ReadySet w/Syncro KT-231P Radio
Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Overview:
The Kyosho Fazer Mk2 FZ02L 2006 Subaru Impreza was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the Fazer series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source.
Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allow drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter.
Features:
Officially licensed by Subaru to Kyosho
Based on the GDB type Impreza nicknamed Hawkeye.
Pre-painted finished body with Kyosho's original coloring with beautiful gradation and flashy colors that are conscious of the drift scene.
On the side of the body, the number 60 is placed to commemorate the 60th anniversary of Kyosho.
Factory-assembled Readyset package only requires (AA) alkaline batteries for the transmitter and battery with charger for the chassis!
In the initial setting, the vehicle height is raised so that troubles due to gaps can be avoided.
Full ball bearings that reduce drive loss equipped throughout the drive system.
Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
Shaft drive full-time 4WD touring chassis.
Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.
Uses Hex head button or countersunk screws within each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.
Motor mount with holes to accommodate 29T to 37T pinion gear.
Performance can be further enhanced by installing various optional parts.
Chassis realizes a low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes the torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without an upper deck.
Reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.
Handling factors such as bump steer and scrub radius are optimized on the front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.
Resin drift tires that have both control performance and slide performance are equipped with 5-spoke racing wheels with deep rims that are conscious of the drift scene.
Specifications:
Scale: 1/10
Drivetrain: 4WD Shaft driven
Length: 456mm
Width: 205mm
Height: 140mm
Wheelbase: 260mm
Tread (F/R): 174mm
Tires (F/R): 63.2×24.2mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
Motor: G14L
Includes:
(1) Kyosho Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Electric Touring Car
(1) Syncro KT-231P+ transmitter and receiver
(1) Hexagonal wrench
(1) Spanner
(1) Drift wheels set
Needed to Complete:
(1) 2S (7.4V) LiPo Battery with T-Style connector
(1) Compatible Charger
(4) (AA) Batteries
This product was added to our catalog on December 30, 2023
ONI2804, Onisiki Daruma Aluminum Case High Performance Drift Gyro (Three-Axis)
Onisiki Daruma Aluminum Case High Performance Drift Gyro. This gyro is a great option for those needing a high performance gyro for anything from buggies to drift cars. The gyro gain is adjustable from both the gyro and from your transmitter if you have more than 2 channels on both your receiver and transmitter. The 3-Axos support makes this gyro even more precise allowing your RC model to be more predictable.
Features:
For Touring, Drift or F1 chassis
Full aluminum case
Gyro gain can be adjusted from a 3rd channel
Specifications:
Weight: 12g
Size: 25*26*10mm
Voltage: 5-8.4V
Current consumption: 20mA/6V
Working temperature: -10°C to +50°C
Support input signal: PWM (50-333Hz) / FUTABA S.BUS /SANWA SSR /SANWA SHR
Output servo signal: 1520uS (333Hz) /760uS (FUTABA SR) /SANWA SSR
Control System: PID Control System
This product was added to our catalog on May 11, 2022
ONI4605, Onisiki 120 Amp Brushless Drift Electronic Speed Controller (Limited Edition)
Onisiki 120 Amp Brushless Drift Electronic Speed Controller. This ESC is a great option for RC drift applications due to its smooth throttle response and adjustable timing. The ESC is capable of 120A to keep performance consistent through the run. Onisiki gave this ESC their signature markings to best match the other available accessories. Package includes one ESC, five ESC wires, one fan, one fan shroud, one capacitor bank, one receiver wire and hardware.
NOTE: This ESC requires soldering. Please note the connections as A + B - C.
Features:
Designed for 1/10 or 1/12 Touring and Drifting
Full aluminum housing
Racing and reverse mode
Compatible with sensored and sensorless motors
Low-Voltage Cut-Off, Thermal and Signal Loss protections
Programmable via the Hobbywing Multifunction LCD Program Box (HWA30502001)
Specifications:
Voltage: 7.4-11.1V (2-3S LiPo)
Continuous Current: 120A
Peak Current: 720A
Motor Limit with 2S LiPo/5-6 NiMH: 3.5T
Motor Limit with 3S LiPo/8-9 NiMH: 8.5T
Fan Size: 25x25x10mm
Fan Voltage Range: 5-8V
Size: 40x30x21mm(w/o Fan)
Wire: 12AWG
This product was added to our catalog on May 11, 2022
OP-15063, Acuvance Chevalier Blaze Capacitor
This is the first capacitor device in the "Chevalier" series, which has a reputation for its high efficiency and high power characteristics.
TRACE also inherits the greatest features of the same series, "large capacity" and "low resistance". By inserting this product into the empty port of the receiver, the power supply capability from the receiver to the servo, gyro, etc. will be improved.
* No soldering work is required when mounting on the vehicle.
This product was added to our catalog on August 7, 2023
SDW-FULL3DTUR, Sideways RC Scale Drift Full 3D Turbo
This is a Sideways RC Full 3D Turbo, a detailed scale option part to add realism to any 1/10 drift kit exhaust. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. The 3D turbo is handmade with the colors infused directly into the product in multiple pigment options and a realistic paint scheme applied. This pack includes one molded plastic full exhaust system which includes a molded plastic red air filter and adds a high level of detail to any drift application.
Note: Modification to your model may be required when installing these parts.
Features:
All parts are handmade.
Colored parts have been infused with pigment.
Open cast molded out of polyurethane.
Realistic paint scheme.
Specifications:
Length: 67.0mm
Width: 22.0mm
Height: 18.0mm
Includes:
(1) 1/10 Scale Full 3D Turbo
This product was added to our catalog on July 17, 2023
SDW-FULL3DTURV2, Sideways RC Scale Drift Full 3D Turbo V2
The Sideways RC Scale Drift Full 3D Turbo V2 is a great option to add realism to any scale drift build. The turbo is open cast molded out of quality polyurethane for added durability and detail. This turbo is handmade with the coloring infused directly into the product and a realistic paint scheme applied. Sideways RC left no stone unturned with this turbo, featuring a large compressor and turbine housing with an oil inlet and outlet port between each housing to add extreme detail. Designed to sit on top of the hood of your RC drift car, further details added to give the most custom look.NOTE: Modification to your model may be required when installing these parts.Features:
Open cast molded using high quality polyurethane
Handmade with coloring infused directly into the product
Adds extreme realism to any RC drift build
Specifications:
Length: 48mm
Width: 25mm
Height: 25mm
Includes:
(1) Scale Drift Full 3D Turbo V2
This product was added to our catalog on July 17, 2023
This is a Sideways RC Scale Drift Full Exhaust Turbo Kit, a detailed scale option part to add realism to any 1/10 drift kit. This part has been open cast molded out of quality polyurethane to provide a high level of detail, while remaining affordable. The assembly is handmade with the colors infused directly into the product, with hand painted details to provide an even more realistic assembly. Package includes one full exhaust turbo kit.
NOTE: Modification to your model may be required when installing these parts.
Features:
All parts are handmade
Colored parts have been infused with pigment
Open cast molded out of polyurethane
Realistic hand painted details
Includes:
(1) 1/10 Scale Full 3D Turbo
This product was added to our catalog on June 9, 2023
SDW-FULLINTKIT-LOW-S, Sideways RC Scale Drift Full Intercooler Kit (Silver) (Low Profile)
This is a Sideways RC Scale Drift Full Low Profile Intercooler, a detailed scale option part to add realism to any 1/10 drift kit engine bay. This plastic part has been open cast molded out of quality polyurethane instead of 3D printed, keeping the cost down and quality up. The intercooler is handmade with the colors infused directly into the product in multiple pigment options and a realistic silver paint scheme applied. This pack includes one molded plastic full intercooler, left and right pipe attachments and blue and red fitting options for installation.
Note: Modification to your model may be required when installing these parts.
Features:
All parts are handmade
Colored parts have been infused with pigment
Open cast molded out of polyurethane
Includes:
(1) 1/10 Scale Low Profile Intercooler
(2) Side pipes
(2) Red Fittings
(2) Blue Fittings
This product was added to our catalog on July 17, 2023
YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller
The Yokomo RPX-II Drift Spec Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences.
This "Drift Spec" ESC is best suited for 2wd and 4wd 1/10 drift platforms and has been specifically tuned for drifting applications. Smooth throttle control and a multitude of power adjustments makes this ESC one of the best drift oriented options.
Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-RPXP2), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WMA).
Features:
Dedicated sensored brushless controller
Programmable with YOKBL-WMA Wi-Fi module or YOKBL-RPXP2 Programmer
49 Individual ESC programming parameters
A multitude of boost and turbo adjustments
Advanced brake adjustments
Full aluminum case with cooling vent & high power 30mm cooling fan
Specifications:
Motor Type: Sensored Brushless
Motor Limit: 3.0T (specification when using the fan)
Operating Voltage: 3.7-7.4V
Forward/Brake/Reverse: Yes
Full Aluminum Case/Heatsink: Yes
Typ. Voltage Drop @20A per Phase: 0.048V
Rated Current per Phase: 249A
Plugged 30x30x10mm Fan: optional
BEC Output: 6V/7.4V 6A Linear Continuous Current
BEC Output Short Protection: Yes
"Boost 0" Mode: Yes
Multi-frequency system: Yes
Power Wires: 12 AWG
Case Size: 32.9x34.6x19.6mm (without fan)
Weight: 44g (without cables and fan)
This product was added to our catalog on September 5, 2023
YOKBL-WMB, Yokomo WiFi Brushless ESC Speed Control Programmer
This is the Yokomo WiFi Brushless ESC Speed Control Programmer. A Wi-Fi module makes Yokomo‘s latest BL-PRO4 / RS4 / SP4 ESC series more easily programmable! Connect the WiFi Module to the ESC programmer connection connector, perform Wi-Fi connection with the smartphone, and rewrite the ESC with the application installed on the smartphone. If you leave the BL-WM on the machine, you can change the setting at any time as long as the motor is not rotating.
Of course, because it is a wireless connection, even while driving on a circuit, you can stop using the pit road once and rewrite the setting directly from the control panel. In addition, since it has a telemetry function that can check live current / voltage value and rotation speed while driving, mechanics can also monitor the driving situation on the course side. Since traveling data is stored as a log, it can be used as information to set a better program by checking after running.
Specifications:Compatible ESCs: BL-PRO4 (N/B), BL-RS4, BL-SP4Case size: 25×25×9mmWeight: Approx 7g*WiFi connection may be interrupted depending on usage environment. Please note.*It may be prohibited by your local race rules to install the Wi-Fi module while driving; please follow your local circuit rules.
This product was added to our catalog on October 26, 2023
YOKD-177FSA, Yokomo YD-2 Front Direct Type RWD Drift Spring (Soft)
The Yokomo YD-2 Front Direct Type RWD Drift Spring is a rough winding type with excellent response developed for RWD drift applications. This spring is designed to maximize the properties of the spring material by eliminating the paint from the surface. It responds sharply to steering input and improves driving feel with a high level of response. Even under high speed driving, understeer is not likely to occur. The soft type is suitable for p-tile and colored concrete surfaces.
This product was added to our catalog on June 6, 2023
YOKDP-YD2RTR-1, Yokomo YD-2 1/10 2WD RTR Drift Car w/Supra Body (Red or White)
The Yokomo YD-2 1/10 2WD RTR Drift Car with Supra Body offers the prowess of the RWD YD-2 chassis in a ready to run option. The YD-2 chassis has quickly become a preferred chassis in the drift world and now comes in this pre-built form giving both beginners and experts an easy entry into drifting. Utilizing more than 90% of the same parts used on the YD-2Z platform offers the user an abundance of compatible option parts and upgrades. Featuring fine tuned steering geometry gives incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis this Yokomo 1/10 2WD RTR Drift Car kit offers an unsurpassed value.
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on May 29, 2023
YOKDP-YD2RTR-2, Yokomo YD-2Z 1/10 RWD RTR Electric Drift Car w/Supra Body (Red or White)
Yokomo YD-2Z RWD RTR Drift Car with Supra Body
Yokomo YD-2Z 1/10 2WD Ready-To-Run Drift Car with Supra Body. Designed to be a great budget and a beginner friendly option, making it the perfect platform for new hobbyists to get in drifting without sacrificing performance and can always upgrade their car as their skills grow! Based on the latest proven RWD drift YD-2Z platform with 90% or more of the parts being used in this car with plenty of optional replacement parts and performance upgrades already available! In addition, the aftermarket support for Yokomo drift platforms is second to none!
Featuring fine tuned steering geometry that provides incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis, this Yokomo 1/10 2WD RTR Drift Car kit offers unmatched value!
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Specifications:
Scale: 1/10
Completion Level: Fully assembled and ready-to-run
Power Plant: Electric
Motor: 27-Turn Brushed
ESC: Brushed
Length: 425mm
Width: 198mm
Height: 256mm
Weight: 1500g
Gear Ratio: 1:2.6
Includes:
(1) YD-2Z 1/10 RWD RTR Electric Drift Car with Supra Body
(1) 2.4GHz Transmitter and Receiver
(1) 1800mAh Ni-MH Battery
(1) Battery Charger
(1) User Manual
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on July 20, 2023
YOKDPP-302V4B, Yokomo DP-302 V4 Drift Steering Gyro
The Yokomo DP-302 V4 Drift Steering Gyro is a super high performance steering gyro that supports a wide range of needs and is perfect for beginners, high-level competitors, and everyone in between. With newly developed circuitry, this gyro offers 4 selectable modes and features the latest high-performance semiconductor chipset and programming. This helps to eliminate any undesired steering shake from gyro operation, helping to detect excessive movement and reducing the chance of unsettling the chassis. This gives the user unparalleled control over almost any surface.
Designed to make fine adjustments a breeze and switch access is massively improved. The aluminum case has a crisp thin design and the beveled edge has been given a luxurious gold anodizing. The quad control system, which is a revolutionary function, is roughly divided into two: “dual gain mode” and “dual gain control”.
In dual gain mode, ASSIST (assist) and NOR (normal) can be switched by the dip switch. In the ASSIST mode, correction of the gyroscope works strongly against driver’s operation and steering inputs. Allowing even total beginners to enjoy RWD drifting with ease. In NOR mode, the driver’s steering operation is prioritized, making it possible for you to counter steer your chassis allowing more control over larger movements of the steering range.
In dual gain control the gain can be adjusted in the range of SOFT and HARD respectively. In SOFT mode it will be easier to obtain initial front grip by suppressing the initial response of the gyro, taking away a little of the punch, making for tighter more controlled transitions. So it will be suitable for driving on smaller low grip tile and carpet track surfaces. In HARD mode, it is set for driving beginners and large-scale track layouts by increasing the initial response of the gyro.
Yokomo has also added an endpoint adjustment button that allows you to set the travel of the servo through the gyro, preventing any unwanted stress on the steering system, reducing power drain and overheating your servo.
This product was added to our catalog on March 15, 2023
Limited Edition Purple! MD 1.0 Master Drift 1/10 Drift Kit
The Yokomo MD 1.0 Master Drift 1/10 2WD RWD Drift Car Kit features the latest drift technology. The team at Yokomo has taken years of drifting experience and incorporated an incredible amount of features into this highly competitive drift car. Using graphite suspension arms never used in drift cars before is the first hint that this machine is truly race inspired. Drift cars need adjustability and this MD 1.0 delivers. With a multitude of adjustments consisting of car width, skid angle, roll center camber, toe and more you will have no problem tuning your vehicle to the track conditions. Another feature that Yokomo focused on the transmission. Using a three gear transmission out of the box gives you a positive torque setup helping to plant the rear of the vehicle under power. As an option, Yokomo has given you the ability to convert to a more neutral four gear transmission setup again allowing you to tune for any track conditions. Packed with features and adjustments it is easy to see why they call this the "Master Drift".
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Limited Edition Purple!
Limited specification with color anodized main aluminum parts
RWD gear drive
Front and rear aluminum shock towers
Lightweight graphite Shorty battery holder
5mm Graphite suspension arms
Differential height adjustment (3 levels)
Adjustable motor position (13 levels)
Aluminum rod end adapter
Big bore aluminum low friction shocks
Updated ultra-lightweight slide rack steering
Graphite upper deck
Graphite rear ESC mount to maximize traction
Graphite flat body mount plate
Aluminum rear bulkhead for both 3/4 gear transmissions
2.4mm rigid Lightweight graphite chassis
Includes:
(1) Limited Edition MD 1.0 Master Drift 1/10 RWD Drift Car Kit
Needed to Complete:
(1) 2-3 Channel radio system
(1) Electronic Speed Control
(1) 540 Motor
(1) Steering Servo
(1) 2S (7.4V) LiPo battery
(1) Compatible Battery Charger
(1) Drift tires & Wheels
(1) 200mm TC or Drift body
(1) Polycarbonate paint for body
Tools for assembly
This product was added to our catalog on July 13, 2023
Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit (Black, Purple or Red)
The Yokomo SD 2.0 Super Drift 1/10 2WD RWD Drift Car Kit is welcomed into the drifting world with high expectations, with enough tuning capabilities to get lost in, this chassis is great for novice to adept level drivers. The SD 2.0 has been designed to dominate, whether you are leading or chasing this chassis will have you dragging bumper, flowing like water, and is sure to have you spinning brodies around the competition.
The Yokomo SD 2.0 was designed to be one of the most customizable platforms out there the SD 2.0 lets you tune to your heart's desire. With a wide range of adjustability, this RWD platform offers the ability to make changes to suit changing track conditions or driver preferences. Using an updated two piece carbon main chassis the SD 2.0 includes two gearbox options, one three gear and one four gear. These two gearbox options change the direction of the motor allowing for different on-power throttle feel and traction. Additionally included are aluminum oil filled shocks, lightened slide rack steering setup with updated steering knuckles for an overwhelming cutting angle, aluminum shock towers, and updated high traction rear hubs giving the SD 2.0 premium high quality chassis components for precision driving feel and durability. If you are looking for a high quality, highly adjustable 2WD drift platform then look no further, the Yokomo SD 2.0 super drift RWD drift car is the kit for you!
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Updated steering blocks for overwhelming cutting angles
Variable transmission with selectable 4 or 3 gears
Differential height adjustments
Rear bias servo mount
Aluminum rear bulkhead
Lightweight slide rack
High traction rear hubs
Split rear chassis
Lightweight resin front bulkhead
30:70 weight distribution
Specifications:
Scale: 1/10
Length: 16.7in (425mm)
Width: 7.7in (198mm)
Wheelbase: 10in (256mm)
Approximate Weight: 52.9oz (1500g)
Drive: RWD
Power Source: Electric
Gear Ratio: 1:2.6
Assembly Level: Kit
Includes:
(1) Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit
Needed to Complete:
(1) 2-3 Channel radio system
(1) Electronic Speed Control
(1) 540 Motor
(1) Steering Servo
(1) Drift Gyro
(1) 2S (7.4V) LiPo battery
(1) Compatible Battery Charger
(1) Drift tires & Wheels
(1) 200mm TC or Drift body
(1) Polycarbonate paint for body
Tools for assembly
This product was added to our catalog on July 17, 2023
YOKRP-032A, Yokomo 40x40x10mm Racing Performer Cooling Fan
This is the Yokomo Performer Racing Cooling Fan. Coming in at a square 40mm × 40mm, with a 10mm thickness, this fan can push a large volume of air to force cool your motor or ESC. With the included 15cm extension cord, mount this fan in the chassis and plug it into a BEC unit for operation.
This product was added to our catalog on January 10, 2023
YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
YOKRP-6313Y6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (Yellow) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes.
This product was added to our catalog on May 13, 2022
The Yokomo Drift Performance DX1 "R" Brushless Motor is great for asphalt, carpet or any other high grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor.
Features:
Suitable for asphalt and carpet
High rotation - ideal for high-grip road surfaces
Latest stator and coil for smooth rotation
Specifications:
Turn: 10.5T
This product was added to our catalog on September 5, 2023
YOKSD-ACRA, Yokomo Drift Inter Cooler/Oil Cooler Set
This is a replacement Yokomo Inter Cooler/Oil Cooler Set for 1/10 scale drift bodies. This set requires mounting and possible mounting hardware, not included.
This product was added to our catalog on June 1, 2023
This is the Yokomo GReddy R35 SPEC-D Drift Body Set. This body is made from clear polycarbonate and includes decals and window masks. Trimming and polycarbonate paint required.
Plastic parts accessories are not included and must be purchased separately.
This product was added to our catalog on June 6, 2023
YOKSD-GRA90BA, Yokomo PANDEM GR Supra Drift Body Set (Clear)
The Yokomo PANDEM GR Supra Drift Body Set faithfully replicates the aggressive silhouette of a modified GR Supra. By taking the incredibly refined GR Supra platform, and adding the PANDEM aero body kit, this body is a testament to Yokomo's desire to stay on the cutting edge of the drift market. Yokomo's original molding technology faithfully molds the PANDEM aero kit with the front grille, rear underskirt, and deep side constrictions in one single piece - making it easy to add a custom wide body look to your drift build. The attractive lines of the beautifully curved Supra, combined with the accurate addition of the PANDEM body kit gives this body a realistic finish that you wouldn't expect from a RC car body.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
This product was added to our catalog on June 1, 2023
