DragRace Concepts Drag Pak Maxim Titanium Rear Hinge Pin Set. These hinge pins are compatible with the DRC Maxim, and required for use with Drag Pak Rear A-Arms (DRC-10021). Package includes two inner and two outer rear hinge pins and e-clips.
DRC-10083.5, DragRace Concepts Maxim Solid Mount Front Bulkhead (Black)nd e-clips.
DragRace Concepts Maxim Solid Mount Front Bulkhead. This is a replacement front bulkhead intended for the DragRace Concepts Maxim chassis, Drag Pak and Drag Pak Mid Motor platforms. Package includes one solid mount front bulkhead.
NOTE: Replaces DragRace Concepts DRC1 Drag Pak Zero Degree Front Bulkhead (Grey) (DRC-377-0003), (DRC-377)
This product was added to our catalog on July 14, 2024
DRC-304.1, DragRace Concepts DragPak Slash Drag Race Conversion Kit Combo (Standard Motor) (Red) w/Shock Towers, Wheelie Bar & Mount
The DragRace Concepts DragPak Slash Street Eliminator Drag Race Conversion Kit Combo includes the DRC Slider 10" wheelie bar, carbon shock towers, rear shock tower mount and shock mount hardware, to make it easier to convert a 2wd Traxxas Slash chassis into a rear motor no prep dominator.
This lightweight 6oz carbon fiber chassis was developed for the racer that will not be satisfied with a typical Slash drag chassis conversion. Using a combination of precision machined aluminum and carbon fiber, the DragPak system dramatically reduces weight compared to the factory plastic chassis, while the design creates a stiff and rigid platform that is perfect for high powered drag setups. The mid motor configuration flips the position of the standard transmission and puts the motor in front of the rear shock tower. This moves the weight closer to the centerline and provides a more centralized weight balance. Plus, the stock bell crank steering system has been upgraded with a machined aluminum, dual ball bearing set up for increased control, while remaining compatible with the stock steering linkage.
Features:
Convert your Traxxas Slash 2wd to a DragRace Concepts Drag Pak Slash
Rear Motor configuration
For the serious racer who is looking for a high performance advantage
Lightweight 6oz carbon fiber design chassis
Dramatically reduces weight
3mm carbon fiber main chassis and 2.5mm top deck
Machined aluminum standoffs
Machined aluminum servo mounts
Machined aluminum dual ball bearing bell crank steering system
Machined aluminum wheelie bar mount
Machined aluminum rear shock tower mount
10" slider wheelie bar
Shock mounting hardware included
Includes:
Carbon Fiber Chassis Kit
Bell Crank Steering
Steering Servo Mounts
Front & Rear Shock Towers
Rear Shock Tower Mount
Shock Mount Hardware
10" Slider Wheelie Bar
Needed to Complete:
Traxxas Slash Donor Car
RPM Bandit Front A-Arms RPM80492
RPM Bandit Rear A-Arms RPM73282 - or - Custom Works Adjustable Toe Rear A-Arms Short CSW3242
Traxxas Bandit Rear Driveshafts TRA1651
RPM Rear Bumper Mount RPM80902
Slash Front Shocks for Front & Rear
DragRace Concepts 4x36mm Turnbuckles DRC-729
DragRace Concepts 4x48mm Turnbuckles DRC-730
No Prep Street Eliminator Wheels & Tires
No Prep Street Eliminator Body
This product was added to our catalog on December 16, 2021
DRC-304.3, DragRace Concepts DragPak Slash Drag Race Conversion Kit Combo (Standard Motor)
The DragRace Concepts DragPak Slash Street Eliminator Drag Race Conversion Kit Combo includes the DRC Slider 10" wheelie bar, carbon shock towers, rear shock tower mount and shock mount hardware, to make it easier to convert a 2wd Traxxas Slash chassis into a rear motor no prep dominator.
This lightweight 6oz carbon fiber chassis was developed for the racer that will not be satisfied with a typical Slash drag chassis conversion. Using a combination of precision machined aluminum and carbon fiber, the DragPak system dramatically reduces weight compared to the factory plastic chassis, while the design creates a stiff and rigid platform that is perfect for high powered drag setups. The mid motor configuration flips the position of the standard transmission and puts the motor in front of the rear shock tower. This moves the weight closer to the centerline and provides a more centralized weight balance. Plus, the stock bell crank steering system has been upgraded with a machined aluminum, dual ball bearing set up for increased control, while remaining compatible with the stock steering linkage.
Features:
Convert your Traxxas Slash 2wd to a DragRace Concepts Drag Pak Slash
Rear Motor configuration
For the serious racer who is looking for a high performance advantage
Lightweight 6oz carbon fiber design chassis
Dramatically reduces weight
3mm carbon fiber main chassis and 2.5mm top deck
Machined aluminum standoffs
Machined aluminum servo mounts
Machined aluminum dual ball bearing bell crank steering system
Machined aluminum wheelie bar mount
Machined aluminum rear shock tower mount
10" slider wheelie bar
Shock mounting hardware included
Includes:
Carbon Fiber Chassis Kit
Bell Crank Steering
Steering Servo Mounts
Front & Rear Shock Towers
Rear Shock Tower Mount
Shock Mount Hardware
10" Slider Wheelie Bar
Needed to Complete:
Traxxas Slash Donor Car
RPM Bandit Front A-Arms RPM80492
RPM Bandit Rear A-Arms RPM73282
Traxxas Bandit Rear Driveshafts TRA1651
RPM Rear Bumper Mount RPM80902
Slash Front Shocks for Front & Rear
DragRace Concepts 4x36mm Turnbuckles DRC-729
DragRace Concepts 4x48mm Turnbuckles DRC-730
No Prep Street Eliminator Wheels & Tires
No Prep Street Eliminator Body
This product was added to our catalog on December 16, 2021
DragRace Concepts Slash Drag Pak Front Support Plate Stand Off. These are the replacement chassis stand offs for the DRC Drag Pak Slash and Bandit conversions.
DRC-323.1, DragRace Concepts DragPak Slash Drag Race Conversion Kit Combo (MidMotor) (Red) w/Shock Towers, Wheelie Bar & Mount
The DragRace Concepts DragPak Slash "Mid Motor" Street Eliminator Drag Race Conversion Kit Combo includes the DRC Slider 10" mid motor wheelie bar, carbon shock towers, rear shock tower mount and shock mount hardware, to make it easier to convert a 2wd Traxxas Slash chassis into a mid motor no prep dominator.
This lightweight 6oz carbon fiber chassis was developed for the racer that will not be satisfied with a typical Slash drag chassis conversion. Using a combination of precision machined aluminum and carbon fiber, the DragPak system dramatically reduces weight compared to the factory plastic chassis, while the design creates a stiff and rigid platform that is perfect for high powered drag setups. The mid motor configuration flips the position of the standard transmission and puts the motor in front of the rear shock tower. This moves the weight closer to the centerline and provides a more centralized weight balance. Plus, the stock bell crank steering system has been upgraded with a machined aluminum, dual ball bearing set up for increased control, while remaining compatible with the stock steering linkage.
Features:
Convert your Traxxas Slash 2wd to a DragRace Concepts Drag Pak Slash
Mid Motor configuration
For the serious racer who is looking for a high performance advantage
Lightweight 6oz carbon fiber design chassis
Dramatically reduces weight
3mm carbon fiber main chassis and 2.5mm top deck
Machined aluminum standoffs
Machined aluminum servo mounts
Machined aluminum dual ball bearing bell crank steering system
Machined aluminum wheelie bar mount
Machined aluminum rear shock tower mount
10" slider wheelie bar
Shock mounting hardware included
Includes:
Carbon Fiber Chassis Kit
Bell Crank Steering
Steering Servo Mounts
Front & Rear Shock Towers
Rear Shock Tower Mount
Shock Mount Hardware
10" Slider Wheelie Bar
Needed to Complete:
Traxxas Slash Donor Car
RPM Bandit Front A-Arms RPM80492
RPM Bandit Rear A-Arms RPM73282 - or - Custom Works Adjustable Toe Rear A-Arms Short CSW3242
Traxxas Bandit Rear Driveshafts TRA1651
RPM Rear Bumper Mount RPM80902
Slash Front Shocks for Front & Rear
DragRace Concepts 4x36mm Turnbuckles DRC-729
DragRace Concepts 4x48mm Turnbuckles DRC-730
No Prep Street Eliminator Wheels & Tires
No Prep Street Eliminator Body
This product was added to our catalog on November 5, 2021
DragRace Concepts Slash Drag Pak Front End Support Plate V2 Stand Off. Package includes two stand offs used with the DRC Front End Support Plate (DRC-388)
DRC-456.5, DragRace Concepts DR10/B6 Drag Pak Pro Spec Aluminum Front Bulkhead (Black)
DragRace Concepts DR10 Drag Pak Pro Spec Aluminum Front Bulkhead. This is the replacement front bulkhead for the DRC DR10 Pro Spec and B6 Drag Pak models. Package includes one aluminum lower bulkhead, one aluminum upper bulkhead and hardware.
This product was added to our catalog on July 14, 2022
DRC-6028, DragRace Concepts Redline Sidewinder Pro Mod/Pro Stock Wheelie Bar Kit
DragRace Concepts Redline Sidewinder Pro Mod/Pro Stock Wheelie Bar Kit. Package includes replacement wheelie bar kit compatible with the DRC Redline Sidewinder pro mod and pro stock models.
This product was added to our catalog on April 23, 2022
DRC-712, DragRace Concepts The Glue - R/C Traction Compound
DragRace Concepts "The Glue" Tire Traction Compound was developed specifically for No Pre R/C Racing. The Glue was developed over the course of one year of track testing to find a specific blend that performed excellent under a wide variety of traction levels, track temperatures and track surfaces. This allowed DRC to develop a "balanced" traction compound that provides excellent grip, but is not overly sticky that it holds the tire down and hinders performance. The Glue is made from high quality components and packaged in a chemical resistant 4oz bottle dauber bottle for easy use and application.
This product was added to our catalog on March 2, 2022
