58234-8, Traxxas Slash 2WD Extreme HD (NEW) The Slash 2WD has been upgraded with factory-installed Extreme Heavy Duty parts! This new release is part of the final wave for 2024 where we have re-energized our core lineup with clipless body mounting, Extreme Heavy Duty parts, and fresh body graphics. Clipless Short Course Truck Body Tough front and rear tube-style bumpers Body reinforcements to prevent pull-through damage Holds tight for intense action Quick and easy removal Smooth appearance with no body posts or clips High-Performance Waterproof XL-5™ Electronic Speed Control Innovative waterproof design Three drive profiles Sport Mode - forward / brake / reverse Race Mode - forward / brake Training Mode™ - 50% forward / brake / 50% reverse (patented) Traxxas EZ-Set® one-button setup LiPo and NiMH compatible with two-stage low-voltage detection Titan® 550 Motor Powerful Titan 12T 550 modified motor with internal cooling fan Oversized armature for big torque and increased power handling Virtually maintenance-free operation Molded wire retainer keeps motor wires secure Includes Battery and USB-C Charger 4-amp USB-C fast charger 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD® Extreme Heavy Duty Parts Installed Strengthened C-hubs, axle carriers, and steering blocks HD suspension arms TQ™ 2.4 GHz 2-Channel radio system Ergonomic transmitter with internal antenna Traxxas 6519 3-channel micro receiver with fail-safe security Patented O-ring sealed watertight receiver box keeps receiver dry Tough Fiber-Composite Monocoque Chassis Long 13.2″ wheelbase for increased stability Over 3.5-inches of ground clearance Easy Access Battery Compartment Adjustable battery hold down Accepts 6- and 7-cell flat packs and 7-cell hump packs Accepts many 2s LiPo battery configurations Transmission and Driveline Brushless-ready Magnum 272™ metal-gear transmission Torque-Control™ slipper clutch system Planetary gear differential with steel ring gear Sealed gearbox protects the transmission with beefed up motor guard External gear cover with easy clutch access Heavy-duty telescoping U-joint driveshafts and yokes Steering Digital High-torque waterproof Traxxas 2075 steering servo High-performance bellcrank system minimizes bump steer Suspension Adjustable steel turnbuckles Captured rod ends won't pop off Springs and Shocks Fully adjustable oil-filled Ultra Shocks™ with X-ring technology Race-tuned progressive rate white powder-coated springs Wheels and Tires Pre-glued scale all-terrain tires with performance foam inserts 2″ outer diameter, 3″ inner diameter dual-profile SCT wheels Rubber-Sealed Ball Bearings Precision Hex Hardware This product was added to our catalog on September 6, 2024

Read more less

AXI31599, SCX24 Deadbolt Body Set (Clear and Cut) This product was added to our catalog on May 8, 2024

Read more less

AXIC1480, Axial AE-5L Waterproof 3S Brushed Crawler ESC w/LED Port & Lights This is the Axial AE-5L 3S Brushed Crawler ESC with LED Ports, and included LED Lights. For replacement AE-5L LED Light Strings, see part AXI31481. Axial RR10 Bomber 2.0 Axial SCX10 I Axial SCX10 II AE-5L ESC WITH DRAG BRAKE, WATERPROOF The Axial AE-5L ESC is 3S LiPo capable yet easily switched “in the field” between LiPo and NiMh battery types with a simple jumper – no more complex procedures. LED Light controller built-in with dual LED outputs for headlights/taillights. Male Star Plug lead - compatible with the most common polarized plug. Jumper 1 provides a simple plug and play choice between LiPo or NiMh. Jumper 2 switches Drag Brake settings. Waterproof design with Star Plug / laser etched heat sink. Specifications: Input Voltage: 2-3S LiPo, 5-9 Cells NiMH/NiCd Size: 46.5x34x28.5mm Weight: 70g Motor Limit: 12T 2S/ 18T 3S On-Resistance FET: .002 Rated/Peak Current: 180A Braking Current: 90A BEC Voltage: 6.0V 3.0A Peak PWM Frequency: 1KHz Includes: AE-5L ESC w/T-Style Connector Front 2 LED White Light String Rear 2 LED Red Light String 4 LED White Light String NOTE: The AE-5L LED Output Leads are not compatible with old Axial LED Light Strings, or Third Party LED Light Strings! Connecting your old LED light strings to these leads will cause damage to the AE-5L ESC and the light strings. You must only use the included LED Light Strings with the AE-5L. This product was added to our catalog on February 20, 2024

Read more less

COR54001, Corally CORA 40-Brushed ESC, 2-3S: SP Versions Max. Cont. Current (A): Forward: 40 A / Reverse: 20 A Motor Limit: 2S = 12T 3S = 18T Input Voltage (V) min. - max.: 5-12.6 V Max. Current (A): Forward: 180 A / Reverse: 90 A Resistance: Forward: 0.002 Ohn / Reverse: 0.004 Ohm Length (mm): 46.5 mm Nr of Li-xx Cells: 2-3S Width (mm): 34 mm Nr of Ni-xx Cells: 5-9 Cell NiMH Motor Type: Brushed Height (mm): 28.5 mm BEC Voltage (V): 6 V BEC Current (A): 2 A Weight incl. wire (g): 65 g Programmable: Jumper Throttle Mode: Forward / Reverse programmable Reverse lockout Battery Mode: NiMH / LiPo Cut off voltage: NiMH mode = 4.5 V Lipo Cut off: 2S = 6.5 V 3S = 9.75 V Thermal Protection Temperature: 105 Degrees C Water Protection: Yes Connector (Motor): 4 mm Connector (Battery): Tamiya style Motor wire size: 16 AWG Battery wire size: 16 AWG Car Type Use: 1/10th scale This product was added to our catalog on January 18, 2022

Read more less

INTC32439, Steel Drive Axle Cross Pins (8): SCX24 This product was added to our catalog on February 27, 2024

Read more less

SPMXSE1040RX, Spektrum RC Firma 40 Amp Brushed Smart 2-in-1 ESC & Receiver The Spektrum RC Firma 40 Amp Brushed Smart 2-in-1 ESC & Receiver was developed with Crawlers and Scale models in mind. The Firma 40 Amp Brushed ESC features a waterproof and dust proof design to keep you going down the trail in nearly any conditions. It has a powerful 3 amp BEC for your lights, winch and steering servo. And it’s fully programmable using an optional programmer box, so you can customize the ESC to suit your model’s needs and your own driving style. The Firma 40 Amp Brushed ESC also helps reduce clutter and streamline your setup with an industry-leading, integrated 4-channel DSMR®/DSM2® receiver. This integrated receiver system is perfectly suited to allow drivers the options for winch setups, dual steering mixes and more. And setup is simple, with a convenient bind button and no complicated calibrations. Plus, when used with a Spektrum Smart compatible transmitter, you can easily see valuable battery and ESC data easily in real time right on transmitter — including motor current, input voltage, remaining battery capacity and other information that will help endurance RC trailers increase efficiency and extend battery life and run time. When using Smart telemetry, alarms and parameters are setup automatically on your Spektrum transmitter. Features: Integrated SMART Technology Built-in 4-Channel DSMR® Receiver Waterproof design Dedicated LED power connectors Multiple protection points Specifications: Antenna Length: 1.2 in (31mm) Auto Cutoff: Yes BEC: Yes BEC Continuous Current: 3A BEC Type: Programmable using optional programmer box (not included) BEC Voltage: 6V Band: 2404MHz, 2476MHz Battery Connector: IC3 Brakes: Yes Channels: 4 Forward: Yes Height: 0.81 in (20.5mm) Input Voltage: 6-10.8V (2-3S LiPo, 5-9 cell NiMH) Length: 2.1 in (54mm) Low-Voltage Cutoff Programmable: Yes Maximum Burst Current: 180A Maximum Continuous Current: 40A Motor Connector: 3.5mm Bullet Overload Protection: yes Programmable: Yes Reverse: Yes Technology: Smart Technology Type: DSMR ESC/Receiver Weight: 2.4oz (68g) Width: 1.3 in (33.5mm) This product was added to our catalog on March 12, 2021

Read more less