1/10 Scale On Road Car Body
Length - 17" or 430mm
Width - 8" or 200mm
Height - 4.5" or 115mm
Wheelbase - 10" or 255mm
Color - Clear
Window Stickers Included - No
Other Stickers Included - Yes
Precut - Yes
2023 Salvas Mud Boss PreCut Dirt Modified Body For Traxxas Slash
Features:
Fits 2wd Traxxas Slash Short Course Truck
2023 Updated Version, Comes Pre-Drilled for Current 3 Piece Inner Panel and the New Nextgen Inner panel
"51" marking on panels to indicate that this is a genuine Salvas body direct from Eric Salvas
Slit running along A Pillar
Includes:
Instructions
30 Plastic Nuts/Bolts to Hold body together
All Body panels are clear Lexan, you will need to construct, wrap or paint.
* Please note that these bodies are cut on a water jet and not cut by hand. For that reason they DO NOT have any type of protective wrap or coating on the body panels.
This product was added on September 29, 2023
These are replacement Plastic Nuts/Bolts for the Salvas Mudboss bodies.
Includes:
Approximately 50 Nuts and 50 Bolts
This product was added on September 29, 2023
ARA402270, Arrma Typhon 4x4 Body (Clear)
This is an Arrma Clear Typhon 4x4 Body, intended for use with BLX 4x4 and Mega 4x4 Typhon kits. This high-quality TYPHON 4X4 Body is perfect for creating a custom painted look for your ARRMA vehicle.
Features:
Tough Polycarbonate for increased impact resistance and long-lasting durability
TYPHON 4X4 BLX Vinyl Decal Sheet included for added detail
Pre-trimmed for fast and easy fi
Protective Overspray Film for fast and easy custom painting
Includes:
(1) TYPHON 4X4 Clear Body Shell
(1) TYPHON 4X4 BLX Decal Sheet
This product was added to our catalog on November 6, 2022
ARA406156, Kraton 6S BLX Painted Decaled Trimmed Body (Red)
Arrma Kraton 6S BLX Pre-Painted Body. This is a replacement body intended for the Arrma Kraton 6S BLX monster truck.
Features:
Strong and flexible Polycarbonate material for long-lasting performance
Aggressive styling for awesome looks and advanced aerodynamic performance at high speeds
Pre-painted trim scheme for eye-catching looks
Decorated in high quality decals for added detail and realism
Pre-trimmed for fast and easy fit
Pre-drilled body post holes for fast and easy mounting
Includes:
(1) Kraton 6S BLX Pre-Painted Body (Red)
This product was added to our catalog on February 16, 2022
ARA409009, Arrma Outcast 8S Pre-Painted Body
Features:
Strong and durable polycarbonate material for long-lasting performance
Pre-painted trim scheme for eye-catching looks
Decorated in high quality decals for added detail and realism
Pre-trimmed for fast and easy fit
Pre-drilled body post mounting holes for fast and easy mounting
Includes:
(1) OUTCAST 8S Pre-painted and decaled body
This product was added to our catalog on September 21, 2021
ARA410002, ARRMA® INFRACTION 1/7 Scale Finished Body (Matte Bronze Camo)
This high-quality polycarbonate INFRACTION 6S pre-painted bodyshell is the perfect replacement for your kit item.
Features
Strong and flexible polycarbonate material for long-lasting performance - Pre-painted with a matte bronze camo trim scheme for eye-catching looks - Decorated in high quality decals for added detail and realism - Pre-trimmed for fast and easy fit - Pre-drilled body post mounting holes for fast and easy mounting.
Includes
1 x INFRACTION 6S BLX PAINTED DECALED TRIMMED BODY
Product Specifications
Manufacturer #
ARAC1138
Material
Polycarbonate
ARA410003, Limitless Clear Bodyshell
This is an Arrma Clear Limitless Body, intended for use with the Limitless 1/7 Scale Speed Bash Electric 4WD All-Road Roller Kit. This high-quality LIMITLESS bodyshell is perfect for creating a custom painted look for your Arrma vehicle.
Features:
Awesome aerodynamic design for high speed stability
Tough polycarbonate for increased impact resistance and long-lasting durability
LIMITLESS vinyl decal sheet included for added detail
Pre-trimmed for fast and easy fit - Protective over-spray film for fast and easy custom painting
Main vehicle body and front nose section included
Includes:
(1) LIMITLESS Main Vehicle Body (Clear)
(1) LIMITLESS Nose Section (Clear)
(1) LIMITLESS Vinyl Decal Sheet
This product was added to our catalog on October 10, 2021
ARA414002, Arrma Infraction 4X4 Mega Body (Clear)
Arrma Infraction 4X4 Mega Clear Body. This clear body has been factory trimmed and is ready for your custom paint to create a personalized, one of a kind look. Package includes optional clear body, decals, window mask, clear wing and hardware.
NOTE:
Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Roof skids and roll bars not included.
Features:
High-quality body molded from tough polycarbonate material
Clear & ready for your custom paint
Includes wing and wing attachment fasteners
Includes:
(1) INFRACTION 4X4 All Road MEGA Trimmed Body (Clear)
(1) Clear Wing
(1) Decal Sheet
(1) Window Mask
(3) M3 8mm Button Head Screw
(3) M3 Nylon Locknut
(3) M3 8mm Washer
This product was added to our catalog on February 1, 2022
ASC20531C, Pro4 SC10 General Tire RTR LiPo Combo
Product Detail
In The Box
(1) Pro4 SC10 General Tire Short Course Truck RTR
(1) #27201 Reedy Compact Balance Charger
(1) #751 Reedy 7.4V 2S LiPo Battery with T-plug
(1) Product Manual
Needed to Complete
(4) AA batteries used in the transmitter
ASC91718, Team Associated B6 Wing/Body Mount
Team Associated B6 Wing/Body Mount. This is the replacement wing mount for the RC10 B6 and B6D buggies. Made from molded composite, this features holes allowing for the optional Team Associated Factory Team Aluminum Wing Mount (ASC91903). Package includes left and right wing braces, shim plate and wing mount buttons.
This product was added to our catalog on July 7, 2021
ASC92308, Team Associated 3.5mm Ballcups (14)
Team Associated 3.5mm Ballcups. These are a replacement intended for the RC10B74.2 and B74.2D series of vehicles using the 3.5mm turnbuckles. Package includes one ballcup parts tree consisting of twelve straight ballcups and two offset ballcups.
This product was added to our catalog on February 2, 2024
BDYDG-M550, Bittydesign M-550 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)
The Bittydesign M-550 Pro Drag Racing Body was designed specifically for the "No Prep" drag racing category. Taking some style from one of the most iconic American muscle cars, the M-550 gives you killer looks while staying within the rules of the No Prep Street category. From the aggressive front end styling to the smooth rear transitions, this body will give racers a perfect balance of performance and aesthetics.Accessories that make the difference!The M-550 includes both a front splitter and a rear wing to aid in straight line performance. The front splitter is mounted using the included hardware and will aid in front end stability. The rear wing is also mounted with the included hardware and will improve the air turbulence generated over the rear chassis.NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.Features:
Advanced aerodynamic design for no prep/street eliminator racing
Molded from genuine 1mm thick Lexan® polycarbonate
Includes rear wing and front splitter
Accessory installation hardware included
Sold clear with overspray film applied
Includes pre-cut decal sheet and the window mask
Specifications:
Length: 645mm
Width: 275mm
Height: 150mm
Wheelbase: 330mm
NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.Includes:
(1) Clear M550 1/10 Pro No Prep Street Eliminator Drag Racing Body
(1) Decal Sheet
(1) Window Mask Sheet
Hardware
This product was added to our catalog on February 18, 2022
BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)
The Bittydesign ZL21 Pro Drag Racing Body was developed to provide racers with an extraordinary looking body, that has the aerodynamics and quality needed to give an edge over the competition. Taking cues from modern muscle car design, the ZL21 offers an incredibly aggressive appearance, manufactured with Bittydesign's obsessive quality standards. But the ZL21 offers more than just a breathtaking look! The advanced aerodynamics help to put all the power to the ground, providing incredible stability under acceleration in a platform that makes it a great choice for both prep track street eliminator class, as well as parking lot no prep racing.
Accessories that make the difference!
Every detail was considered during the design phase. The ZL21 includes a variety of accessory parts that add detail, and aid in performance. A rear wing extension is included to improve performance, helping to generate clean air and reduce turbulence in the rear of the car. A front splitter is included to create a more aggressive appearance, as well as help increase front end stability. Plus, a set of zoomie style pipes and turbo style exhaust are included to add more detail and can be installed if you choose. But that's not all - if the ultimate performance is desired, the optional Pro-drag wing is available (BDYDG-ZL21W - not included) to create an even more aggressive look and increase rear end stability.
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Advanced aerodynamic design for no prep/street eliminator racing
Molded from genuine 1mm thick Lexan® polycarbonate
Includes rear wing, front splitter and two exhaust options
Optional Pro-drag wing is available separately (BDYDG-ZL21W - not included)
Accessory installation hardware included
Sold clear with overspray film applied
Includes pre-cut decal sheet and the window mask
Specifications:
Length: 640mm
Width: 280mm
Height: 164mm
Wheelbase: 330mm
NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.
Exhaust Installation:
Choose which exhaust to install, and paint.
Remove material along cut lines with quality scissors or dremel - remove the longer section to install the zoomie style pipes, and the shorter section to install the single turbo pipe.
Apply double sided tape over the exhaust plate and press it inside the body to secure the exhaust to the body.
This product was added to our catalog on December 16, 2021
BDYDG-ZL21W, Bittydesign ZL21 Pro Drag Racing Wing Set (Clear)
The Bittydesign ZL21 Pro Drag Racing Wing Set was designed as the ultimate high performance option for the Bittydesign ZL21 body, and a must have addition to maximize performance. The wing adds an aggressive aesthetic, while helping to increase traction and clean up the air for reduced turbulence in the back of the body. Plus, this wing kit was developed with close attention to the 2021 rule book, and can be built in two different configurations - longer for the 'No Prep Street Outlaw' class, or shorter to comply with the rules for the 'No Prep 13.5 Street Stock' class. Package includes the parts needed to assembly one clear wing, and all necessary installation hardware.
NOTE: Painted wing shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
This product was added to our catalog on December 16, 2021
