PRODUCT FEATURES
Front/Rear Aluminum Shocks (Blue) (2pcs)
Included shocks for Volcano EPX Pro/Volcano S30 as well as direct fit and upgrade for Volcano EPX models.
Specs:
Oil Filled (suggest 35-40wt oil for replacement)
Length: 105mm (End to End)
Spring Diameter: 13.5mm (Inner)
Shaft Size: 3mm
TRA1654X, Traxxas 12mm Hex Aluminum Wheel Hub (Blue)
Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to worry about the axle drive pins stripping these heavy-duty units.
Key Features:
Made from lightweight 6061-T6 aluminum
This product was added to our catalog on July 31, 2021
TRA1747R, Traxxas 4mm Aluminum Flanged Serrated Nuts (Blue) (4)
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action.
This product was added to our catalog on September 7, 2021
TRA1952X, Traxxas Aluminum Rear Stub Axle Carriers (Blue) (2)
This is a set of two optional Traxxas Rear Stub Axle Carriers and are intended for use with the Traxxas Slash 4x4, Nitro Rustler, Nitro Stampede and Nitro Sport. These will not only add strength to the rear suspension of your Traxxas Truck, these high quality CNC machined 6061-T6 aluminum axle carriers will help to give your ride a "Pro" Truck look.
Includes:
(2) Aluminum Rear Stub Axle Carriers
(2) 3x3mm Set Screws
(2) 3x12mm Flat Head Phillips Screws
(2) 3x31.5mm Pins
(6) 6mm E-Clips
This product was added to our catalog on May 7, 2021
TRA3139A, Traxxas 59mm Aluminum Turnbuckle Toe Link (Blue) (2) (requires 5mm aluminum wrench #5477)
This product was added to our catalog on September 7, 2021
TRA3374, Traxxas Velineon 380 Aluminum Heat Sink
This is an optional Traxxas Aluminum Heat Sink, and is intended for use with Traxxas 1/16 VXL vehicles equipped with a Velineon 380 brushless motor.
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
This product was added to our catalog or updated on April 4, 2022
TRA3652A, Traxxas Aluminum Stub Axle Carrier (Blue) (2)
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axles.
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.
Traxxas Bandit
Traxxas Drag Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on September 7, 2021
3767A - Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
TRA3767A, SHOCK CAPS ULTRA ALUM BLUE (4)
This product was added to our catalog on September 7, 2021
TRA5186A, Traxxas Aluminum Wheelie Bar Wheel Set w/Rubber Tires (Blue) (2)
This is a replacement Traxxas Aluminum Wheelie Bar Wheel Set, and is intended for use with the Traxxas Wheelie Bar Assembly. The precision 6061-T6 aluminum wheels feature a stunning anodized finish and they ride on rubber-sealed 5x8mm ball bearings. For controllable and seemingly never-ending wheelies, Traxxas developed a durable, soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies. The rubber tires are available separately and they also install on the stock nylon wheels.
Fits:
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Stampede 4x4
Traxxas Telluride 4x4
This product was added to our catalog on April 7, 2021
Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)
TRA6738X, SHOCK TOWER REAR ALUM BLUE
This product was added to our catalog on September 7, 2021
TRA6832X, Traxxas Aluminum Caster Block Set (Blue) (2)
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x4, Stampede 4x4, XO-1 and others. For the ultimate in front end durability, pair with the Traxxas Aluminum Steering Block Set (TRA6837X).
This product was added to our catalog on May 7, 2021
TRA6893X, Traxxas Aluminum Slipper Shaft Bearing Adapter w/Bearing (10x15x4mm)
This is an optional Traxxas Aluminum Slipper Shaft Bearing Adapter, and is intended for use with the Traxxas Slash 4x4, and Stampede 4x4. This package also includes a 10x15x4mm rubber sealed bearing.
This product was added to our catalog on September 7, 2021
TRA7650R, Traxxas LaTrax Aluminum Front/Rear Driveshaft (2) (Blue)
This is a pack of two optional LaTrax Aluminum Driveshafts. These blue anodized driveshafts are crafted from 6061-T6 aluminum alloy material and provide a direct fit for either the front or rear location in the vehicle. Package also includes two axle screws.
This product was added to our catalog on April 19, 2021
Traxxas Aluminum Steering Bellcrank Set w/Bearings
The Traxxas Aluminum Steering Bellcrank Set with Bearings is a machined aluminum upgrade for the Rustler, Bandit, Nitro Slash, and Slash models. This bellcrank set will enhance steering precision, strength, and looks. These ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life.
Fits:
Traxxas Bandit
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
The pre-assembled units are easy to install, include detailed installation instructions, and are available in a variety of anodized colors with laser-etched Traxxas logo.
This product was added to our catalog on April 12, 2021
