ARA230008, Arrma Wide Arm BOOST Box
Arrma Wide Arm BOOST Box. When looking for the ultimate suspension upgrade on your Arrma Granite or Vorteks vehicle this Wide Arm BOOST Box is your solution. Not only does this box include longer suspension arms but it also included wishbones and turnbuckles. The ARRMA Wide Arm BOOST Box also includes a QR code that links to a step-by-step assembly video for easy installation.
Features:
Take your Arrma Granite or Vorteks to the next level!
Wider arms improve vehicle stability
Assembly video shows easy, step-by-step installation
Package also includes Arrma BOOST decals
Includes:
(1) Assembled Front Left A-Arm
(1) Assembled Front Right A-Arm
(1) Assembled Rear Left A-Arm
(1) Assembled Rear Right A-Arm
(6) 48mm Link Turnbuckles
(1) Arrma BOOST Wide Arm Upgrade Product Manual
(1) Arrma BOOST Decal Sheet
This product was added to our catalog on June 22, 2023
ARA320585, Lower Front Bumper and Rear Diffuser Set
Arrma Infraction Mega/Vendetta 3S BLX Lower Front Bumper and Rear Diffuser Set. These replacement components are intended for the Arrma Infraction Mega 4x4 or the Vendetta 3S BLX. Made from a tough composite material, these components allow for consistent fit and easy service. Package includes one lower front bumper and one rear diffuser.
This product was added to our catalog on March 17, 2024
ARA330551, Arrma Rear Shock Set (2)
This is a replacement Arrma Rear Shock Set, intended for use with the Mega 4x4 and BLX 4x4 models of the BigRock, Granite, Senton and Typhon kits.
Note: Requires either ARA330460 or ARA330539 springs to complete.
Features:
High-quality materials
Supplied assembled without springs
Pre-filled with shock oil
Ready to bolt on to your vehicle after fitting your choice of spring
Spring spacers included for fine-tuning of vehicle ride height
Includes:
(2) Assembled Shock Absorbers
This product was added to our catalog on August 29, 2021
ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio
The Arrma 1/10 Granite 4X4 V3 3S BLX Brushless 4WD Monster Truck delivers jaw-dropping power and 50+ MPH brushless performance. Precision aluminum, tough steel and composite materials come together for an easy-to-maintain, super-durable vehicle design that’s now upgraded for even greater performance and durability.
The GRANITE 4X4 3S BLX RTR is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain toughness. Features that enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout.
It also now includes a Spektrum SLT3 transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control, plus an improved hand grip and trigger feel. New drivers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3 is compatible with Tactic SLT receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them.
ARRMA now powers the GRANITE 4X4 3S BLX with a brushless system featuring its BLX100 ESC and the Spektrum Firma 3200Kv brushless motor. The combination provides incredible torque, acceleration and speed. The transmission and chassis are ruggedly engineered to take full advantage of the electronics’ power.
It has the ingenious modular design perfected by ARRMA engineers for easy component access and maintenance. The power module, with improved dirt management, consists of the motor with ARRMA heatsink and cooling fan, plus motor plate, slipper clutch assembly and gear cover. The power module can be detached from the chassis as a complete unit by removing just one screw. With the power module removed, the slipper clutch can be reached easily for adjustments by taking out three screws that attach the gear cover. The gear ratio can be finely tuned as the power module now uses a sliding motor mesh design.
A two-piece molding screwed to the truck’s chassis serves as its electronics module, containing a waterproof receiver box, servo mount and ESC tray. The SLR300 receiver mounts inside the receiver box for protection from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, allowing quick access to the on/off switch, while the servo mounts to the side. All three components can be removed together, quickly and easily.
The differential module houses each differential unit in an innovative yoke design. Only eight screws need to be removed to release the front and rear yokes. The power module can then be detached, allowing you to pivot the gearbox cases for differential access. The GRANITE 4X4 3S BLX RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing.
Its full-time 4WD transmission uses strong front, rear, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. A simple, dependable, responsive steering assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The GRANITE 4X4 3S BLX RTR includes the waterproof Spektrum SPMS651 metal-geared digital servo for 15% more torque than the previous version’s ADS-7M servo.
The self-bleeding, oil-filled shocks, now with silicone O-rings, use a tried and tested, coil-over design for simple maintenance and amazing handling. Their innovative rod-end has a molded-in spring perch for extra toughness. Extended height dirt defenders and a close-fitting body limit the amount of dirt and debris that can get into the chassis tub. Front and rear bumpers offer defense against impacts.
Four dBoots Fortress MT tires on gunmetal multi-spoke wheels give the GRANITE 4X4 3S BLX superb bite on a multitude of surfaces. ARRMA has also installed a wheelie bar as standard. The aggressively styled truck body looks great while bashing and even better up-close and personal, with great attention to detail on the decal and body aesthetics. Choose green or red trim schemes.
Features:
Stronger chassis and retained hinge pin plates
Steering with more clearance for stones
Castellated slipper pad and sliding gear mesh
Plastic locknut for slipper
23T Spline servo saver
37T 1.35Mod diffs with silicone O-rings
Power Module with sliding gear mesh and improved dirt management
Rubber shielded bearings throughout
Oil-filled shocks with silicone O-rings
Front and rear bumpers
Tough gunmetal colored multi-spoke wheels
Vented multi-terrain dBoots® Fortress™ MT tires
BLX100 2S/3S waterproof* ESC *For details on waterproof standards, refer to the instruction manual.
IC5™ connectors (EC5™) compatible
Signature easy-access modular design
Easy-access power module
Easy-access electronics module
Easy-access diff module removal front and rear
Double wishbone suspension front and rear
Metal-geared differentials
Extended height dirt defenders
Adjustable ride height
Adjustable body mounts
Adjustable turnbuckles
High-speed center driveshaft support
Wheelie bar
2-year limited warranty (see website for details)
50+ MPH (80+ km/h) speed achievable in optimum driving conditions on 3S LiPo
Specifications:
Ball Bearings: Full Ball Bearing Drivetrain
Battery: Sold Separately
Body: Painted, decalled and trimmed
Charger: Sold Separately
Chassis: Molded Composite
Completion Level: Ready-To-Run
Differential: 2 Gear Diffs
Drivetrain: 4WD
Final Drive Ratio: 10.83
Front Track: 13.46 in (342mm)
Power Type: Electric
Gear Pitch: 0.8MOD
Ground Clearance: 1.85 in (47mm)
Internal Gear Ratio: 2.85
Motor Type: Brushless - Sensorless
Pinion: 15T
Product Height: 8.11" (206 mm)
Product Length: 18.74" (476 mm)
Product Weight: 6.23lbs (2826g)
Product Width: 13.46" (342 mm)
Radio: Included
Rear Track: 13.46 in (342mm)
Receiver: Included
Scale: 1/10
Servos: Included
Shock Type: Oil-Filled, Coil-Over Springs
Speed Control: Included
Spur Gear: 57T
Suspension: Independent
Vehicle Type: Monster Truck
Water-Resistant: Yes
Wheelbase: 11.3 in (287mm)
Includes:
(1) ARRMA® GRANITE™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR
(1) BLX100 2S/3S Waterproof* ESC
(1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor
(1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
(1) Spektrum™ SLR300 Receiver
(1) Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
(1) Product Manual
*NOTE: For details on waterproof standards, refer to the instruction manual.
Needed to Complete:
2S LiPo or 3S Hardcase LiPo Battery
Compatible Charger
LiPo Safe Charging Bag
(4) AA Batteries
This product was added to our catalog on March 5, 2021
ARAC3335, AR402253 Body Painted/Decal Green Granite 4x4 Mega
This GRANITE 4X4 MEGA bodyshell is the perfect replacement for the kit supplied item. Ideal if you want to freshen the look of your old bodyshell. Strong and hard-wearing with ARRMA eye-catching trim scheme, this pre-painted, pre-decaled bodyshell is supplied trimmed and ready to fit straight to your vehicle.Awesome looks and tough ARRMA durability, with no need for complicated cutting or fitting before you go out and hit the dirt.FeaturesHigh-quality molded body - Head-turning paint scheme - Pre-decaled with ARRMA vinyl stickers that add stylish looks - Pre-trimmed and drilled for fast and easy installationIncludes1 x GRANITE 4X4 MEGA Painted Decaled Trimmed Body (Green/Black)
This product was added to our catalog on March 24, 2024
ARAC3336, AR402256 Body Pntd Decal Trim Red GRANITE 4x4 MEGA
This GRANITE MEGA 4X4 bodyshell is the perfect replacement for the kit supplied item. Ideal if you want to freshen the look of your existing body. Strong and hard-wearing with eye-catching ARRMA trim scheme, this pre-painted, pre-decaled body is supplied trimmed and ready to fit, straight to your vehicle.FeaturesPre-painted in a super-cool ARRMA off-road color scheme for head-turning looks - Pre-decaled with ARRMA high-quality vinyl stickers for added detail and stylish looks - Pre-trimmed and drilled to fit your vehicle for fast and easy installation with no need for tools.Includes1 x GRANITE 4X4 MEGA Painted Decaled Trimmed Body (Red/Black)
This product was added to our catalog on March 24, 2024
ARAC3444, AR320410 Bumper Springs (2) 4x4
FeaturesTough composite material for long-lasting vehicle protection and increased impact resistance - Precision manufactured for consistent fit and easy servicing - Includes two bumper springs that can be fitted to the front or rear of your vehicleIncludes2 x Bumper Spring
This product was added to our catalog on August 29, 2021
ARAC8940, AR330451 Composite Shock Parts/O-Ring Set (2)
This composite shock part and O-ring set provides a collection of shock absorber spare parts for your RC tool box.FeaturesTough composite material for long-lasting durability in all conditions - Precision manufactured shock absorber parts for fast and easy suspension servicing - Carefully selected O-ring material for smooth, leak-free shock action - Selection of spacers for ride-height tuningIncludes2 x O-Ring Spacer2 x Shock Piston2 x 7mm Pre-Load Spacer2 x 5mm Pre-Load Spacer2 x 3mm Pre-Load Spacer2 x Shock Cartridge2 x Spring Location Ring2 x Shock Cartridge Top2 x O-Ring 8 x 1.5mm4 x O-Ring 2.6 x 2mm
This product was added to our catalog on March 24, 2024
ARAC9698, Flanged Lock Nut 5x8mm (4)
Product DetailsThese Flanged Lock Nuts provide an ideal replacement part for your kit items.FeaturesPrecision manufactured from high-quality materials for a long service life - Nylon insert to prevent loosening - Large serrated flange bites into wheel surface to provide a secure fit - M5 machine thread - 8mm Hex sizeIncludes4 x M5 Large Flange Lock Nut
This product was added to our catalog on Mar h 17, 2024
RPM81492, RPM Arrma 4x4 Front Suspension Arm Set (Black), Big Rock, Senton, Granite
Fits:
Arrma Granite 3S BLX
Arrma Granite 4x4 Mega
Arrma Senton 3S BLX
The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package.
Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. This outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds.
Durability: Molded from RPM's trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! RPM also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments.
Lightweight: With RPM's stronger materials and improved designs, they are able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability.
Features:
Fits 3s BLX 4×4 versions of the Big Rock, Granite & Senton
Exclusive 2nd shock mount hole for added adjustability
Replaces stock AR330443
NOTE: RPM A-arms fit the following ARRMA vehicles; Big Rock 4×4 (#AR102711), Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Front A-arms replace ARRMA #AR330443.
This product was added to our catalog on December 16, 2021
