ALC-107, Alclad II Lacquers Lacquer Airbrush Paint (Chrome) (1oz)
The Alclad II Lacquers Laquer Airbrush paint is a great option for those working with injection molded plastic model kits. These paints are designed to produce a wide range of realistic and durable finishes. Designed only for airbrush use, this paint should be sprayed at 12-15psi and at a distance of 2-3in from the surface.
NOTE:
For airbrush application only.
Buffing is not necessary.
Preparation and Spraying
Clean the painting surface thoroughly. There must be no dust, grease, oil or finger marks.
Apply the appropriate primer for the Alclad paint being used.
Spray at 12-15psi 2-3in from the surface.
Regular ALCLAD can be masked and painted.
Decal solutions can be used with Regular ALCLAD, but are not recommended for Chrome or Polished Aluminum.
This product was added to our catalog on March 19, 2021
BAD2001, 200 Airbrush Basic Set
Product Details
Key Features
Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear
PTFE head seal assures efficient air flow
Non-slip, one-piece trigger
Overview
Badger's 200® Series offers the ease of single action operation while providing the fine spray pattern of internal mix paint atomization for professional results. Depressing the trigger releases a pre-set amount of color which can be regulated by turning a needle adjustment screw at the back of the airbrush handle. Once the desired paint flow is set the airbrush will maintain the preset spray pattern until the user chooses to change it.
Product Specifications
Airbrush Action
Single Action
Airbrush Feed
Bottom Feed
Airbrush Mix
Internal Mix
PRO632500, Pro-Line RC Body Airbrush Paint (White) (2oz)
Pro-Line RC Body Airbrush Paint is specially formulated for Polycarbonate. Pro-Line’s Team of Innovators have painted thousands of RC car bodies over the years and now offers ready to spray R/C Body paints specially formulated to help you achieve the same jaw dropping results. Developed by R/C body painters for painters, this water-based airbrush paint is ultra-flexible, extremely durable and easy to use. Have the confidence that you are spraying the best!
Ready to Spray
This pre-thinned airbrush paint makes it easy to grab the color you want and spray without the hassle of mixing (using a 0.5mm tip @ 30psi). You may reduce the paint with Pro-Line Paint Reducer (PRO6324-00 - sold separately) for smaller tips or specific applications.
Specially Formulated for Polycarbonate
Bash, Crash, Race or Show, Team Pro-Line has done it all! Pro-Line R/C Paint is a high-performance durable water-based airbrush paint that is specially formulated to meet the extreme requirements of polycarbonate R/C Bodies. It is durable yet flexible to allow R/C bodies to deform and come back to their shape. You will not only get great performance, you also get the same color options chosen by the experts.
Features:
Professional Results
Developed by R/C Painters for R/C Painters
Specially Formulated for R/C Bodies
Ready to Spray. Use right out of the bottle (with a 0.5mm tip @ 30psi)
Spray Without the Hassle of Mixing
Water Based
Extremely Durable and Ultra-Flexible
Easy to Use
May be reduced with PRO6324-00 Paint Reducer (Sold Separately) for smaller tips and other specific applications
Variety of Color Options
Made in the USA, since 1982
Directions:
Secure lid & shake well for 30 seconds for optimum color mixture blend
Use right out of the bottle (using a 0.5mm tip @ 30psi)
May be reduced with PRO6324-00 Paint Reducer for smaller tips and other specific applications
This product was added to our catalog on November 28, 2021
PRO632702, Pro-Line RC Body Airbrush Paint (Pearl Lime Green) (2oz)
Features:
Professional Results
Developed by R/C Painters for R/C Painters
Specially Formulated for R/C Bodies
Ready to Spray. Use right out of the bottle (with a 0.5mm tip @ 30psi)
Spray Without the Hassle of Mixing
Water Based
Extremely Durable and Ultra-Flexible
Easy to Use
May be reduced with PRO6324-00 Paint Reducer (Sold Separately) for smaller tips and other specific applications
Variety of Color Options
Made in the USA, since 1982
Directions:
Secure lid & shake well for 30 seconds for optimum color mixture blend
Use right out of the bottle (using a 0.5mm tip @ 30psi)
May be reduced with PRO6324-00 Paint Reducer for smaller tips and other specific applications
This product was added to our catalog on January 21, 2021
TAM74548, Tamiya Spray-Work Airbrush Cleaning Kit
The Tamiya Spray-Work Airbrush Cleaning Kit helps keep your Tamiya Spray-Work series airbrush is squeaky clean and in peak condition. Perfect for cleaning openings both narrow and wide, the included brushes ensure that paint does not clog up the inner workings of the airbrush such as the nozzle and needle, in addition to the paint cup. Also included are high-viscosity grease and sealant to combat air leakages during use, plus a wrench which can be used to remove the nozzle from all of Tamiya's Spray-Work airbrush products.
Features:
Extra-Fine Brush: Features durable PBT bristles and an easy-to-handle stainless steel wire stem. It’s ideal for cleaning narrow spaces such as the airbrush nozzle.
Standard Brush: Utilizes PBT bristles and a stainless-steel stem with grip. Efficiently cleans the paint cup after use.
Sealant tub: The sealant ensures that air does not escape from any gaps at the base of the nozzle. It does not solidify, allowing cleaning and reapplication as necessary.
High-viscosity grease tub: This grease is for use in maintenance of the trigger button stem, its viscosity ensures smooth and controlled movement of the trigger and paint application.
Nozzle wrench: This wrench is compatible with all Spray-Work series airbrushes, and is used to remove the nozzle without damage.
Includes:
(1) Extra-Fine Brush (Brush: 12mm length x 2mm dia.; total length: 100mm)
(1) Standard Brush (Brush: 12mm length x 7mm dia.; total length: 100mm)
(1) Sealant tub (Contents: 3g)
(1) High-viscosity grease tub x1 (Contents: 7g)
(1) Nozzle wrench
This product was added to our catalog on April 30, 2021
