ASC7662, Team Associated 32P Spur Gear (81T)
Team Associated 32 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on OCTOBER 5, 2023
This is the Hot Racing 65 Tooth, 32 Pitch / 0.8Mod Hardened Steel Spur Gear in Black anodize.
Features:
CNC machined and lightened hardened steel construction
Upgrades factory plastic gear
Black oxide coating for durability and corrosion resistance
Gunmetal/black anodized countersunk washers
Specifications:Number of Teeth: 65Gear Pitch: 32 pitch (0.8 module)Mounting Holes: 3Tooth Face width: 6mm (0.24 inch)
Includes:
(1) 65 tooth 32 pitch (0.8mod) spur gear
(3) mounting screws
(3) washers
(3) gunmetal/black anodized countersunk washers
This product was added to our catalog on December 16, 2021
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)
This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Grey-colored countersunk washers
Specifications:
Number of Teeth: 53
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) grey-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on December 16, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff.
Traxxas Slash 4x4
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
HRASTE250, Hot Racing Traxxas 32P Steel Spur Gear (Orange) (50T)
This is an optional Hot Racing Traxxas 32P 50T Steel Spur Gear with Orange hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Black oxide coated gear for durability and corrosion resistance
Orange anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 50
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 50 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) orange anodized countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on December 16, 2021
HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T)
This is an optional Hot Racing Traxxas 32P 52T Steel Spur Gear with Red hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 52
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 52 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) red anodized countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on May 4, 2021
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T)
Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit)
This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts
Black oxide coated gear for durability and corrosion resistance
Purple anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 18T/56T
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 18 tooth 32 pitch (0.8 Mod) pinion gear
(1) 56 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) purple anodized countersunk washers
(1) pinion adapter sleeve
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on March 16, 2021
TRA3956, Traxxas 54T Spur Gear (0.8 Metric Pitch) (32-P)
This is a replacement 54T (0.8 Metric Pitch) spur gear from Traxxas. This gear mounts to the input shaft of the transmission, and meshes with the pinion gear on the clutch bell.
This product was added to our catalog on September 7, 2021
TRA3958, Traxxas 58T Spur Gear (0.8 Metric Pitch)
This is an optional 58T (0.8 Metric Pitch) spur gear from Traxxas. This gear mounts to the input shaft of the transmission, and meshes with the pinion gear on the clutch bell.
This product was added to our catalog on September 7, 2021
TRA4472, Traxxas 72T Spur Gear 32P
This is a replacement 72T 32 pitch spur gear from Traxxas. The spur gear is the gear that the clutch bell on the engine meshes with.
This product was added to our catalog on September 7, 2021
TRA6842, Traxxas .8 Mod Spur Gear (50T) (Slash 4x4)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA6842X, Traxxas Steel 32P Center Differential Spur Gear (50T)
This is a replacement Traxxas Steel 50t 32P Center Differential Spur Gear, intended for use with the 4x4 VXL Hoss.
Includes:
(1) Steel Spur Gear 50-tooth (0.8 metric pitch, compatible with 32-pitch)
This product was added to our catalog on September 7, 2021
TRA8053, Traxxas Mod 0.8 TRX-4 Spur Gear (45T)
This is a replacement Traxxas 45 Tooth Mod 0.8 TRX-4 Spur Gear.
This product was added to our catalog on April 13, 2021
