CSE010-0065-32, Castle Creations Mod 1 Pinion Gear w/8mm Bore (32T)
This is the Castle Creations Mod 1 Pinion Gear with 8mm Bore. Designed to offer a high strength 8mm bore option for large scale vehicles, this Mod 1 pinion has been constructed from carbon steel. This incredibly strong material matched with the precision of being CNC machined and a high wear case-hardened finish gives you a top tier pinion option. Package includes one pinion gear with set screw.
This product was added to our catalog on April 18, 2021
CSE010-0065-33, Castle Creations Mod 1 Pinion Gear w/8mm Bore (34T)
Castle Creations Mod 1 Pinion Gear with 8mm Bore. Designed to offer a high strength 8mm bore option for large scale vehicles, this Mod 1 pinion has been constructed from carbon steel. This incredibly strong material matched with the precision of being CNC machined and a high wear case-hardened finish gives you a top tier pinion option. Package includes one pinion gear with set screw.
This product was added to our catalog on January 14, 2023
HRANSG3227, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (27T)
Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions.
Features:
CNC machined
Hardened steel to increased wear resistance and improve fatigue life
Nitride coating to enhanced hardness and corrosion resistance
5mm Bore
32 pitch
NOTE: 32 standard pitch is the same as 0.8 mod
Includes:
(1) pinion gear
(1) M5x5mm set screw
This product was added to our catalog on December 16, 2021
HRANSG3234, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (34T)
Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions.
Features:
CNC machined
Hardened steel to increased wear resistance and improve fatigue life
Nitride coating to enhanced hardness and corrosion resistance
5mm Bore
32 pitch
NOTE: 32 standard pitch is the same as 0.8 mod
Includes:
(1) pinion gear
(1) M5x5mm set screw
This product was added to our catalog on December 16, 2021
HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T)
This is an optional Hot Racing Traxxas 32P 52T Steel Spur Gear with Red hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 52
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 52 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) red anodized countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on May 4, 2021
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T)
Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit)
This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts
Black oxide coated gear for durability and corrosion resistance
Purple anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 18T/56T
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 18 tooth 32 pitch (0.8 Mod) pinion gear
(1) 56 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) purple anodized countersunk washers
(1) pinion adapter sleeve
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on March 16, 2021
TRA6745, Traxxas Steel 32P Pinion Gear (9T)
Traxxas Steel 32 Pitch Pinion Gear. These gears are intended for use with the Traxxas Stampede 4x4 and are available in multiple tooth count options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one set screw.
This product was added to our catalog on September 7, 2021
TRA6747, Traxxas Steel 32P Pinion Gear (11T)
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
This product was added to our catalog on May 7, 2021
Traxxas 32P Hardened Steel Pinion Gear w/5mm Bore
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatible with 5mm motor shafts.
This product was added to our catalog on April 12, 2021
Traxxas 32P Heavy Duty Pinion Gear
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of tooth count options.
Package includes one pinion gear and one set screw.
This product was added to our catalog on April 17, 2021
Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore
Traxxas Machined Mod 1.0 Pinion Gear with 5mm Bore. This is an optional machined pinion gear intended for the Traxxas E-Revo 2.0 and the Traxxas Maxx.
The gear is available in a variety of tooth count options, please select the specific gear you want. Package includes one pinion gear.
NOTE: For use with steel spur gears.
This product was added to our catalog on April 12, 2021
Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Traxxas Steel Mod 1.0 Pinion Gear. This durable steel pinion gear has a 5mm bore and a Mod 1 tooth pitch, making it compatible with a variety of applications. The gear is available in a variety of tooth count options, please select the specific gear you want from the pull down list above. Package includes pinion gear and set screw.
This product was added to our catalog on April 12, 2021
