ERC8-DC-1046, Exclusive RC Drag Racing Chute Mount "D"
The Exclusive RC Drag Racing Chute Mount "D" is a mounting accessory for the Exclusive RC Drag Racing Parachute (EXC-ERC-8-DC-1035). This two piece chute mount features an upper chute mount and a separate rope mount that have been 3D printed from super strong carbon nylon filament, and the mount design will allow fitment with various body types. Mount measures 29.56x26.60x25.91mm (upper) and 20.00x11.24x8.58mm (Rope Mount) and stainless steel hardware is included for mounting and adjustments.
Chute Mount Measurements (LxWxH):
Chute A: 42.27x25.87x61.57mm (Universal)
Chute B: 29.28x26.01x55.13mm (Universal)
Chute C (Double): 29.28x60.22x55.58mm (Universal)
Chute D: 29.56x26.60x25.91mm (upper); 20.00x11.24x8.58mm (Rope Mount) (Universal Fit)
Chute E: 29.28x26.01x43.81mm (Universal)
Chute F (Double): 35.42x62.51x43.41mm (Pro-Line 69 NOVA)
Chute G: 37.35x26.10x43.41 (Pro-Line 69 NOVA)
This product was added to our catalog on February 10 ,2024
The EV800D has given those looking for a set of goggles with a 800x480 5'' screen, DVR and a built-in battery a great option for an amazing value!
Check out our selection of FPV Goggles and Accessories!
Features
Bright 800x480 5" LCD Screen specially tuned for FPV racing
Separable design. Screen can be used as small monitor on radio controller or with tripod!
92% Transparent 3x Lens boosts the video to give you that immersive view
Super-wide viewing angle up to 82
True Diversity: 2x Super Sensitive (-90dB) RX5808 PRO modules
40 Channels with Race Band (See Frequency Chart Below)
Advanced auto-search function and the working frequency show on screen
Great performance when two types (Linear and Omni) of antenna are used.
Build in DVR records up to 720x576 full frame rate video with no frame loss (Class 10 card required)
Two system (Display/Record duo core separated chipsets) ensure no delay in displaying and no frame lost in recording (please use C10 super speed card to ensure the full frame recording)
Replay in your videos in the Goggle Menu
Friendly unintrusive OSD. No blocking of important flying OSD information.
Three-way Adjustable Head Strap
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time.
Specifications
Screen Size: 5"
Screen Resolution: 800x480 (No blur after enlarge by the lens)
Screen Brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
Ratio: 16:9, 4:3
View Angle: 140/120 degree(Horizontal/Vertical)
RF Modules: 2x (-90dB) RX5808 PRO modules
Battery: Built-in 7.4V 1200mAh Battery
Input Voltage: 10-22V typical recharging voltage is 12V, 2S or 3S (7.4V-11.1V) LiPo can be used as back up power to have long working time.
Antenna Connection: SMA
Charger : 12V,2A, DC 2.5mm
Dimension: 180*145*82mm
Weight: 362g without antenna
Includes
1x EV800D 5.8GHz 40CH Diversity FPV Goggles with DVR
1x Charger
1x 5.8G Half-Planar Antenna with SMA Connector
1x 5.8G RHCP Cloverleaf Antenna with SMA Connector
1x AV In Cable
1x DC power cable to 3S balancer plug cable
1x EVA Carrying Case
1x Instruction manual (English)
The Fat Shark Dominator returns. This FPV Drone goggle features high-fidelity FullHD OLED displays and supports a new 1080p video transmission protocol in a compact design. A wide range of IPD and focus adjustments allows the user to tune the optics for any eye. The Dominator comprises premium features such as USB-C Video out, HD DVR recording, and an intuitive full color graphic user interface. Support for Betaflight Canvas Mode lets you control the on-screen display. The Dominator is the new standard for premium FPV.
HD VTX Available here!
Check out all our FPV Goggles, and our FatShark gear selection!
Features
HD Video Output via USB-C Connector
Supports Betaflight Canvas Mode
Integrated HD DVR
Adjustable Anti-Fog Ventilation
Customizable Fit with Optional Faceplate Pad Accessories
On/Off Power Button
Specifications
OPTIC ENGINE
Field of View (FOV): 46°
Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)
Adjustable Focus Range: +2 to -6 diopter
MICRO DISPLAYS
Full HD 1080p OLED Dual Micro Displays
INPUT VOLTAGE: 7-21V (2S-5S)
Includes
1x Fat Shark Dominator HD FPV Goggles
1x Carry Case
1x XT60 Power Cable
1x Goggle Strap
1x Lens Cleaning Cloth
***MONEY BACK GUARANTEED FROM FATSHARK
The 2.1 Version now has a twist focus design unlike the 2.0 with its original separate focus wheel system.
The Dominator HDO2.1 headset launches as the successor to the much-loved Dominator HDO. The HDO2.1 uses big 1280 x 960 OLED panels to provide a dramatically improved image with a 46-degree field of view. Display customization is now possible using a new OSD with expanded controls. The HDO2.1 can be further personalized with adjustable focus, adjustable IPD, adjustable face plate curvature, selectable image ratio, and a configurable power button. The HDO2.1 is the perfect headset for an experienced pilot looking for the best flight experience.
Check out all our FPV Goggles, and our FatShark gear selection!
Specifications
Optics:
FOV (field of view): 46 degrees diagonal
IPD (interpupillary distance): 54 to 74 mm (adjustable)
Focus: +2 to -6 diopters (adjustable)
Display:
Two Sony 0.5” OLED displays
Resolution 1280 x 960
NTCS/PAL auto selecting
AV Mode 4:3
AV Mode 16:9
HDMI Mode 16:9
Audio:
Stereo
User Controls:
Channel Selection
Volume Control
Mode Selection
Display Control (Brightness and Contrast)
DVR Control
Power Button / Fan Control
Electrical:
Power Supply: 7 – 13V input voltage (2S – 3S Supply)
Power Consumption: TBD
Analog DVR: MicroSD support to 32 GB
Record Rate: 6Mbps (MJPG compression, 30 fps, AVI)
File playback (native recording, no codec support)
Upgradeable via SD card
Battery:
7.4V, 1.8A 18650 Battery Case (optional))
Interface:
3.5mm AV in/out port
Power input port
3.5mm 3p earphone port
MicroSD
RF Module Bay
HT connector 3 pin internal connection
Power Button
Mechanical:
Ergonomic molded headset w/ adjustable headband
Dimensions: 169.2 x 80 x 45.5 mm
Weight: 206.8 g
Includes
1x Fat Shark HDO2.1 Goggles
1x Fat Shark 18650 Battery Case
1x Zippered Carry Case
The Fat Shark Recon HD’s unparalleled image quality is achieved with a 1080p display viewed through Fat Shark’s patented folded optical engine. The 4” panel delivers a crisp 44-degree FOV image at 60 fps with compatibility with WalkSnail transmitters. Recon retains a reputation as a high-performance goggle at an affordable price while maintaining anti-fog fan features, a comfortable form factor, and glasses accommodating faceplate.
Features
Ergonomically Molded Headset w/ Adjustable Headband
4 Internal Wide Beam Width Directional Antennas
Positive Upgradeable via SD Card
5-Way OSD Button Navigation
1920x1080 TFT 4" Display
DVR Record Button
Black Menu Button
44° Diagonal FOV
USB-C Video Out
Specifications
Power Supply: 5.1mm Barrel Connector, 7-21V (2S-5S) Center Pin
RF: 4 Internal Wide Beam Width Directional Antennas
Inter-Pupillary Distance (IPD): 55 - 76mm (fixed)
Operating Frequencies: 5.725-5.850GHz
Package Size: 517g, 180 x 128 x 98mm
Positive Upgradeable: via SD Card
Field of View (FOV): 44° Diagonal
Dimensions: 170 x 120 x 90mm
OSD Navigation: 5-Way Button
4 Inch TFT (1920 X 1080)
Record Button: DVR
Menu Button: Back
Memory: MicroSD
Video Out: USB-C
Weight: 336.5 g
Includes
1x Fat Shark Recon HD FPV Goggles
1x Lens Cleaning Cloth
1x Goggle Strap
1x Power Cable
Check out FlyFishRC M8QMC-5883L GPS & Compass Module, which uses ublox 10th generation chip for staple positioning speed. With this quality made GPS you'll experience a more stable connection. This new generation of GPSs have the ability to connect to more satellites simultaneously. This unit comes with a high sensitivity 18x18mm GPS patch antenna. It has a SH1.0-6Pin terminal design, so no soldering required!
Check out our GPS selection and all our FlyFishRC products!
Features
72 channel 10 Hz Refresh rate
Built-in TCXO crystal and farad capacitor for faster hot start
High sensitivity 18x18mm GPS patch antenna
SH1.0-6Pin terminal design, no soldering required
QMC5883L Magnetometer chip, Precise pointing
Specifications
GPS module: FlyFishRC M8QMC-5883L GPS Module
Frequencies: 72 channel
Refresh Rate: 10 Hz
Compass module: QMC5883L
Baud Rate：4800bps-115200bps (Default - 9600bps)
Sensitivity: Tracking: -162dBm， Capture: -160dBm，Cold Start：-148dBmAccuracy: Horizontal <2.5m average), SBAS < 2.0m average, Timepulse: RMS 30 ns
Cold start: <24s
Hot start: <2s
Maximum height: 50000m
Maximum speed: 500 m/s
Speed accuracy: 0.05 m/s
Maximum acceleration: ≦ 4G
Input Voltage: 3.3V-5V，current 25mA
Output Connector: SH1.0-6P
Weight: 8.8g
GPS pin definition: RX/TX UART
Compass pin definition: SDA/SLA
Includes
1x FlyFishRC M8QMC-5883L GPS AND COMPASS MODULE
1 x SH1.0-6Pin Cable
1 x SH1.0 Connector
1 x GPS Manual
Wiring Diagram & Betaflight Configuration
Flywoo's custom new antenna specifically designed for the Flywoo Firefly 2S, Not saying that it couldn't be used in your next sweet custom build!
Check out our ever expanding selection of VTX antennas and our Flywoo gear selection!
Specifications
Frequency range: 5500-6000MHz
Gain: 3dbi
Axial Ratio: 0.7
Cable： RG1.37
Length: 30mm
Polarization: LHCP
SWR: ≤1.5 (ON 5.8GHz)
Includes
1x Flywoo Atomic 5.8GHz U.FL Antenna - LHCP 40mm / 10mm Tube
The Flywoo Firefly Nano Baby 20 2S Micro Quadcopter BNF Analog comes with Flywoo's Nano Camera V2 and is equipped with the most efficient micromotor and the top AIO flight controller on the market! This micro quadcopter will bring you an unprecedented flying experience; the Firefly Nano Baby 20 can do crazy acro and keep up with all the tricks up your sleeve.
Check out the rest of our pre-built quads, as well as the rest of our Flywoo selection!
Features
Comes with 1002 15500KV motors and Gemfan 2015 - 2 blade propellers, which provide the best balance of performance and flight time.
Versatile and highly integrated circuit board - GOKU Versatile F405 2S 12A AIO. Built-in ELRS 2.4g RX. Have multiple sets of serial external devices.
Easy switch battery mount design. Explorer 2S 420mAh for Racing, Explorer 2S 750mAh for long flight time.
Great mount compatibility for cameras like the Thumb Pro, Peanut, GO2, Thumb, and related
Specifications
Weight: 33.8g (without battery)
FC & ESC: GOKU Versatile F405 2S 12A AIO
Frame: Firefly 2S Nano Baby 20 Analog Frame kit
Motors: Flywoo ROBO 1002 15500KV
Props: Gemfan 2015-2 blade
VTX: GOKU VTX625 V2 450mW Nano VTX
Camera: Flywoo 1.2g 1S Nano camera V2
GOKU Versatile F4 5-IN-1 1S AIO FC
Size: 30x30mm
Weight: 4.1g
Hole: 25.5x25.5-3mm
MCU: STM32F405
UARTS: 1,2,3,4,5,6
MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
GYRO: ICM42688
Barometer: BMP280
LED: 2x WS2812
Flash: 8M
BEC: 5V 2A
Firmware: FLYWOOF405S_AIO
Onboard 4in1 ESC
Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7
Flywoo ROBO 1002 15500Kv Motor
Kv: 15500Kv
Input Voltage: 2S LiPo
Stator Dimensions: Φ10mmx2mm
Shaft Diameter: Φ 1.5mm
Wire Dimensions: 30AWGx40mm
Weight (w/ wires): 2.4g
Flywoo 1S Nano Camera V2
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC and PAL(switchable)
MENU: Support
IMAGE: 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm/F2.5
Min. illumination: 0.001Lux
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14x14mm
Wide Power Input: DC 5-25V
Work Temperature: -20°C~+60C
Work Humidity: 20%~80%
Weight: 1.2g (N.W.)
Includes
1 x Flywoo BNF Firefly 2S Nano Baby 20 2" Quad Analog w/ GOKU VTX625 V2 & Nano Camera V2 - ELRS 2.4GHz
2 x Sets of 2015-2 props
1 x Screw spare packs
2 x Battery holder
4 x Prop guards
Flywoo introduces a remarkable, highly integrated AlO product, the GOKU Versatile F405 1-2S, 12A 5-in-1, 400mw AlO with Built-in ELRS 2.4G. Featuring the world's first STM32F405 BGA chip. It provides 5 UART serial ports for seamless device/module connection & 12C compass input. A 12A 4-in-1 ESC, fully-integrated serial ports-controlled ELRS receiver and a built-in 400mw VTX make it perfect for Tiny Whoop races or Toothpick freestyle flying.
Look at our other Whoop/AIO Flight Controllers, as well as the rest of our Flywoo selection.
Features
F405 BGA chip utilizes the powerful for enhanced computational processing power and a smaller form factor
Features an onboard 12A 4-in-1 ESC
Equipped with 5 UART serial ports for effortless connectivity with various devices and modules.
Supports 12C compass input, providing accurate navigation and positioning capabilities ExpressLRS 2.4G· Built-in receiver (UART) with a lightweight design, convenient for WiFi upgrades.
Built-in 400mw 5.8G video transmitter for an extended signal transmission range Built-in 8MB black box storage for easy access to flight status data.
Specifications
Product Name: Versatile F405 5IN1 AIO
MCU: STM32F405 BGA
Gyro: ICM42688
Barometer: SPL06
Black Box: 8M
LED: Supported
OSD: Supported
Buzzer: Supported
UART: 1, 2, 3, 4, 6
Built-in Receiver: ExpressLRS 2.4G
Built-in VTX: 25/50/100/200/400mw
VTX Protocol: IRC Tramp
ESC Protocol : Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Continuous Current: 12Ax4
Input Voltage: 15-25 (3V-8.7V)
BF Firmware: FLYWOO F405S AIO
Target ELRS Firmware: Flywoo EL24E 2400 RX 3.0.0
ESC Firmware : Z.H_30_REV16.7(BLHELI.S)
Size: 30.3x30.3mm
Mounting: 25.5x25.5-3mm
Weight: 4.6g (Without Antenna), 5.7g (With Antenna)
Includes
1x Flywoo GOKU Versatile F405 1-2S AIO Whoop/Toothpick Flight Controller (w/12A 8Bit 4in1 ESC & 400mW VTX) - ELRS 2.4GHz
The Flywoo Robo 1003 motor provides an efficient power output and smooth operation in a lightweight package. It's constructed of top-grade 7075 aviation aluminum and boasts a dual bearing design, high-efficiency magnetic circuit design, dual color oxidation, and wire soldering pad for reliable control. It's an ideal choice for whoop and toothpick models.
Check out our Micro Motors and Flywoo gear selection!
Specifications
Brand: FLYWOO
Model: RB1003 Brushless motor
Configuration: 9N12P
Magnet: N52H
Stator Diameter: 10MM
Stator Height: 3MM
Output Shaft Diameter: 1.50MM
Dimensions: 13.5mm x 9.2mm
Rated Voltage: 1-2S
Mounting Hole: 3xM1.4-D6.6
Weight: 3.3g (4cm wire)
Includes
1x Flywoo Robo 1003 14,800Kv Micro Motor - Gold/Purple
At its inception, the Toothpick formula was to turn a whoop inside out and give it the ability to perform like a much larger craft. Just a typical brushless AIO whoop board with similar motors but very large, very light 65mm(2.5in) props on a very light frame. The resulting performance was jaw dropping in any configuration from an AUW of ~37g on 1S to 73g on 2S and pure wackiness on 3S.The goal with the Toothpick project was first and foremost to be safe for almost any environment, fully legal, quiet, durable, reliable and most importantly, loads of fun! These features should not be compatible with each other but the magic of crazy disk loading and power radios made it possible.As with anything, the more you do it, the more developed and fine tuned your tools become. Like a surgeon that gets better at their craft and graduates to more and more developed instruments, the TP3 is literally a refined, purpose built, surgical instrument of the sky. If built to top end spec on 3S, this sucker is a frikin bullet! So throw that safety out the window. However the same setup on 2S becomes a very safe friend :-). Just as safe as the original Toothpick setup. The noise profile on 2S is significantly quieter than a 65mm/2.5” Toothpick twin blade on 2S. On 3S it’s still slightly quieter than a top power spec 65mm/2.5” Toothpick.The TP3 formula is similar to the original. Extremely low weight, large props for such a low weight and the smallest motor that can spin that prop with good control. The pudding is in the details however and we spent months intensely testing everything just to find out that what we’re looking for doesn’t exist! So we started making custom parts. There is a lot in how it’s setup as well but that’s better left to the video than writing pages on pages...Starting with the prop, we knew what we wanted but it didn’t exist. Having a good relationship with Gemfan, we carefully crafted a prop together and they got working on manufacturing. With the prop in mind, we then tested custom motor products from just about every known company out there before landing on a couple of gems...that only became good with numerous revisions. Other manufacturers will figure it out and give us more options in time but the two we have now are stellar. Given the crazy performance we were after, the frame also needed to be reimagined to perform and hold up to a new level of punishment. Next, we had to solve the annoyance with whoop boards and how difficult they were to solder. FullSpeed and BetaFPV were instrumental in the execution of the redesign and we now have two great options in case one runs into QC or reliability issues. The rest of the build is arbitrary but we prefer just a basic camera and Vtx to keep the weight down.
Performance wise, this thing is FAST. FAST fast. There are probably other things in this size class that are faster in a straight line, but that's not what we mean by fast. It’s like flying a laser pointer, it just does EXACTLY what you want it to do with absolute precision. Throttle control is also exquisite. It's a bit difficult to explain all the performance in words but when you fly one, you'll understand. The performance profile on a low weight load out also fits a Betaflight stock tune with just a little more TPA.Durability is one area that may be in question and is where we need to put a little bit of a disclaimer on this style build. When built to top spec on 3S, this thing is VERY FAST and INSANELY AGILE. This build is designed for advanced pilots but it doesn’t mean that it’s weak or not for beginners. That’s actually far from true. The frame is quite robust, motors are quality built and even the prop shaft is beefed up. When you first learn to ski or snowboard, you fall. You fall a LOT. It hurts. As you improve, you learn how to fall. Pro level athletes do amazing things and also know how to fall amazingly well. As an FPV pilot, you learn how not to break your equipment….or, balls to the wall and you know you’re going to break it and are okay with it. To achieve this level of performance, high durability has been replaced with repairability. It definitely still takes quite a bit of force to break an arm. The extremely low weight means that if you’re a beginner and running 2S, it’ll be quite difficult to break. It really only becomes a hazard to itself when you're darting around at high speeds.This thing is so incredibly easy to fly with its low weight and incredible control, it’s exactly what the advanced pilot needs to push their own limits and exactly what the novice wants to learn on.
Check out all our 2-3" Frame Kits and the rest of our FPVCycle Collection
Features
Multi Unit design
T700 carbon in 0.5mm laminate thickness (thinner is better, typical is 1.5mm)
~9-10g built frame base with hardware (some variation)
1.5mm body plates, 2.5mm arms
Accepts 1”x1” typical whoop mounting platform
Good quality carbon but no chamfers to keep costs down
Made to be used. Not a shelf ornament.
Every line on this design is very delicately crafted for optimization
Repairability when you smash it
Skinnier arms for less thrust deflection and rotational drag
Similar weight to a monobody of the same or lesser durability
Cheaper to maintain
Easier to repair and maintain
Doesn’t ruin your flying day due to a crash
Recommendations
Under 109g AUW with 3S 450mah
Under 95g on 2S 450mah
No smaller or larger than 450mah cells in 3S or 2S
Press fit props on a 2mm prop shaft motor
No more than ~7g per motor
NO TPU SHOES ON THE ARMS!
Includes
1x FPV Cycle Toothpick 3 3" Frame - TP3
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame.
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Features
65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most; connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct
Recommended Part List
Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)
Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color
HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 65 Micro Frame Kit - Choose Your Version
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 65 Pro Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Pro Whoop Micro Frame Kit and Meteor65 Pro Whoop frame.
Note: This is designed for prop guards that fit 35mm props like the Meteor65 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro version has been squished to the max to fit 35mm props with Meteor 65 Pro ducts.
Check out our other Micro frames, and our Fractal Engineering Products!
Features
A variant of the Fractal 65 frame kit
Squished to the max to fit 35mm props with Meteor 65Pro ducts
Maintains 65mm motors distance to meet racing specs
Still fits the camera between the front ducts 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most; connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct
Recommended Part List
BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 1.8g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 65 Micro Frame Kit - Choose Your Version
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 75 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 75 whoop micro Frame Kit Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Whoop Micro Frame Kit and HappyModel Mobula7 V4 Whoop frame.
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 75mm whoop frame, and that will serve as your protection for you motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Features
75mm diagonal, squished X geometry, for 40mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction. Cut from Japanese T300 CF sheet
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most; connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct
Lightweight, about 21g with HM DiamondF4
Recommended Parts List
HappyModel Gemfan 1610 Bi-Blade 40mm Micro/Whoop Prop 4 Pack - Grey
HappyModel RS 0802 20,000Kv Micro Motor - Choose Version
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 2.1g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 75 Micro Frame Kit - Choose Your Version
From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props
Check out our other Micro frames, and our Fractal Engineering Products!
Features
A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.
The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front
Extended camera mount to reduce prop guards in view
Low center of gravity, by bringing the AIO close to the frame/motors
Allows mounting with USB pointed up for easy accelerometer calibration
Easy maintenance, break a duct, replace only the single duct
No need for a canopy as all electronics are tucked safely between the ducts
Approximately 21g using the Happymodel DiamondF4 AIO
Recommended Parts List
Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color
Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color
HappyModel RS 0802 20,000Kv Micro Motor - Choose Version
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 75 Micro Frame Kit - Choose Your Version
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 3.6V 2S 300 mAh 80C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 300 mAh and a discharge rate of 80C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB3002S80AHV
Capacity: 300mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 12x17x52mm (HxWxL)
Net Weight: 19g (+/-2g)
Discharge Rate: 80C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 3.6V 2S 300mAh 80C LiHV Whoop/Micro Battery w/ Cabled Connector - XT30
All batteries must be shipped by a ground shipping method.
GNB Series Lipos are known and loved by the community for their strong performance.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specification
Capacity 450mAh
Configuration 2S1P
Nominal Voltage 7.6V
Dimension 14x17x61mm Appr.
Weight 28g (+/-1g)
Max cont. discharge (C-rate/current) 80C
Max Burst (C-rate/current) 160C
Charge Connector JST-XH 3P
Discharge Connector XT30
Working Temperature Charge 0~45°C
Working Temperature Discharge (-20~60°C)
Working Humility 65%RH +/-20%
Storage Temperature (-20~35°C)
Storage Humility 65%RH +/-20%
Life Cycle 300+ times
Includes
1x Gaoneng 7.4V 2S 450mAh 80C LiPo Whoop/Micro Battery w/ XT30
All batteries must be shipped by a ground shipping method.
GNB Series Lipos are known and loved by the community for their strong performance.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specification
Capacity 5000mAh
Configuration 2S1P
Nominal Voltage 7.6V
Dimension 20x53x81mm Appr.
Weight 178g (+/-1g)
Max cont. discharge (C-rate/current) 5C
Max Burst (C-rate/current) 10C
Charge Connector JST-XH 3P or XT60
Discharge Connector XT60
Working Temperature Charge 0~45°C
Working Temperature Discharge (-20~60°C)
Working Humility 65%RH +/-20%
Storage Temperature (-20~35°C)
Storage Humility 65%RH +/-20%
Includes
1x Gaoneng 7.4V 2S 5000mAh 5C LiPo Battery w/ XT60
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.4V 2S 650 mAh 80C LiPo Battery is the perfect solution for your 2S quads. Boasting a capacity of 650 mAh and a discharge rate of 80C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB6502S80A
Capacity: 650mAh
Voltage: 7.4V
Cells Configuration: 2S1P
Pack Dimension: 14x28x62mm (HxWxL)
Net Weight: 44g (+/-2g)
Discharge Rate: 80C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.4V 2S 650mAh 80C LiPo Micro Battery (Square Type) - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 380 mAh 90C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 380 mAh and a discharge rate of 90C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB3802S90AHV
Capacity: 380mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 13x17x52mm (HxWxL)
Net Weight: 22g (+/-2g)
Discharge Rate: 90C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 380mAh 90C LiHV Micro Battery - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 450 mAh 80C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 450 mAh and a discharge rate of 80C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB4502S80AHV
Capacity: 450mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 13x17x64mm (HxWxL)
Net Weight: 27g (+/-2g)
Discharge Rate: 80C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 450mAh 80C LiHV Micro Battery (Long Type) - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 530 mAh 80C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 530 mAh and a discharge rate of 90C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB5302S90AHV
Capacity: 530mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 13x17x64mm (HxWxL)
Net Weight: 26g (+/-2g)
Discharge Rate: 90C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 530mAh 90C LiHV Micro Battery (Long Type) - XT30
All batteries must be shipped by a ground shipping method.
Specification
Capacity 550mAh
Configuration 2S1P
Nominal Voltage 7.6V (LiHV)
Dimension 12x18x69mm Appr.
Weight 29g (+/-1g)
Max cont. discharge (C-rate/current) 100C
Max Burst (C-rate/current) 200C
Charge Connector JST-XH 3P
Discharge Connector XT30
Working Temperature Charge 0~45°C
Working Temperature Discharge (-20~60°C)
Working Humility 65%RH +/-20%
Storage Temperature (-20~35°C)
Storage Humility 65%RH +/-20%
Life Cycle 300+ times
Includes
1x Gaoneng 7.6V 2S 550mAh 100C LiHV Micro Battery w/ XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 650 mAh 120C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 650 mAh and a discharge rate of 120C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB6502S120AHV
Capacity: 650mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 11x30x61mm (HxWxL)
Net Weight: 36g (+/-1g)
Discharge Rate: 120C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 650 120C LiHV Micro Battery - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 660mAh 100C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 660mAh and a discharge rate of 100C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Capacity: 660mAh
Voltage: 2S/ 7.6V
Discharge: 90C Constant, 180C Burst
Weight: 34g
Dimensions: 37mm(L) x 35mm(W) x80mm(H)
Discharge Plug: JST Connector or XT60 Plug
Includes
1x Gaoneng GNB 7.6V 2S 660mAh 90C LiHV Micro Battery (Long Type) - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 720 mAh 100C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 720 mAh and a discharge rate of 100C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Model No.: GNB7202S100AHV
Capacity: 720mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 14.5x18x70mm (HxWxL)
Net Weight: 36g (+/-2g)
Discharge Rate: 100C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 720mAh 100C LiHV Micro Battery (Long Type) - XT30
All batteries must be shipped by a ground shipping method.
The Gaoneng GNB 7.6V 2S 850 mAh 60C LiHV Battery is the perfect solution for your 2S quads. Boasting a capacity of 850 mAh and a discharge rate of 60C, it provides reliable, efficient power with a long flight time. Including an XT30 connector ensures a secure connection, delivering reliable and consistent power.
Check out our other 2S batteries and our selection of Gaoneng Products!
Specifications
Capacity: 850mAh
Voltage: 7.6V (LiHV)
Cells Configuration: 2S1P
Pack Dimension: 18x18x70mm (HxWxL)
Net Weight: 38g (+/-2g)
Discharge Rate: 60C
Charge Rate: 1C to 5C
Discharge Connector: XT30
Includes
1x Gaoneng GNB 7.6V 2S 850mAh 60C LiHV Micro Battery (Long Type) - XT30
GEA40002S60D8, Gens Ace 2s LiPo Battery 60C (7.4V/4000mAh) w/T-Style Connector
GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Additionally this Gens Ace Battery features Sub-C style "Bumps" on the bottom of the case to mimic the fit of NiMh batteries which are commonly found on touring car style chassis. However this battery can be used normally in a wide variety of vehicles which makes it extremely flexible with applications.
Gens Ace LiPo Battery Packs
NOTE:
When used with Traxxas 2S applications, you may need the optional extended battery strap.
Slash & Slash 4x4
Stampede/Rustler/Bandit
Stampede 4x4
Some vehicles may require some re-balancing if the light weight of these batteries cause some handling changes. To get the vehicle to balance correctly, add some weight to the battery side of the vehicle.
Specifications:
Voltage: 7.4
Cell Count: 2S
Capacity: 4000mAh
Discharge: 60C
Dimensions: 138x48x24mm
Weight: 240g
This product was added to our catalog on May 11, 2022
GEA50002S50D1, Gens Ace 2S Stick 50C LiPo Battery w/T-Style Connector (7.4V/5000mAh) (Type 1)
This product was added to our catalog on December 16, 2021
GEA51002S13D5, Gens Ace Redline 2S Shorty LiHV LiPo Battery 130C w/5mm Bullets (7.6V/5100mAh)
Gens Ace Redline 2s Shorty 130C LiHV LiPo Battery with 5.0mm bullet and 4.0mm adapters. GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Features:
Stable automatic stacking technology enables single cell capacities of 6000mAh.
The most strict single cell capacity, voltage, resistance, discharge curve matching process.
Superior Japan and Korea Lithium Polymer raw materials.
Standard 5.0mm bullet w/4.0mm Adapters
Specifications:
Capacity: 5100mAh
Voltage: 7.6V / 2S2P / 4 Cell
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Weight: 208g
Size: 96mm x 46mm x 25mm (L x W x H)
Connector Type: 5.0mm bullet
This product was added to our catalog on September 6, 2024
Gens Ace 2s LiPo Battery 60C w/T-Style Connector (7.4V/5300mAh)
Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Features:
Stable automatic stacking technology enables single cell capacities of 5000mAh.
The most strict single cell capacity, voltage, resistance, discharge curve matching process.
Superior Japan and Korea Lithium Polymer raw materials.
Specifications:
Capacity: 5300mAh
Voltage: 7.4V / 2S2P / 2 Cell
Discharge Rate: 60C
Max Burst Discharge Rate: 100C
Weight: 289g
Size: 138.5x47x25.5mm (LxWxH)
Connector Type: Deans
This product was added to our catalog on March 18, 2021
GEA60002S13L5, 7.6V 6000mAh 2S 130C HV Lipo: 5.0mm BULLET
Features
Stable automatic stacking technology enables single cell capacities of 6000mAh.
The most strict single cell capacity, voltage, resistance, discharge curve matching process.
Superior Lithium Polymer raw materials.
Standard 5.0mm bullet
Overview
Gens Ace Redline Series 2S 130C 6000mAh Hardcase LiPo Battery Pack with 5.0mm bullet. Gens Ace is the name you can trust to deliver dependability and high performance. The Gens Ace 130C 2S 6000mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect from all Gens ace RC car lipo batteries.
Product Specifications
Application
Surface
Battery Capacity
6000-6999mAh
Battery Type
HV-LiPo (3.8V per cell)
Battery Voltage
7.6V
Capacity
6000mAh
Connector Type
5mm Bullet
Hard Case
Yes
Maximum Burst Discharge Rate
260C
Maximum Continuous Discharge Rate
130C
Number of Cells
2
Product Height
0.86" (22 mm)
Product Length
5.47" (139 mm)
Product Weight
9.62oz (273g)
Product Width
1.85" (47 mm)
Watt Hours
45.6
GEA82002S13D5, Gens Ace Redline 2s LiHV LiPo Battery 130C w/5mm Bullets (7.6V/8200mAh)
This is a Gens Ace 2S 130C 8200mAh Redline LiHv LiPo Battery. GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Features:
Stable automatic stacking technology enables single cell capacities of 8200mAh.
The most strict single cell capacity, voltage, resistance, discharge curve matching process.
Superior Japan and Korea Lithium Polymer raw materials.
Standard 5.0mm bullet
Specifications:
Capacity: 8200mAh
Voltage: 7.6V
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Weight: 298g
Size: 138mm x 46mm x 25mm (L x W x H)
Connector Type: 5.0mm bullet
This product was added to our catalog on August 15, 2021
GEA8502S60E2, Gens Ace 2S LiPo Battery 60C (7.4V/850mAh) w/EC2 Connector (Losi Mini-B)
GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Specifications:
Nominal Voltage: 7.4V (2S)
Capacity: 850mAh
Maximum Charge Rate: 1C (0.85A)
Discharge Rate:
Continuous: 60C
Peak: (Not Available)
Cell Configuration: 2S1P
Watt Hours: 6.29Wh
ROAR Approved: No
Connector:
Battery: EC2
Balance: XHR
Dimensions (LxWxH): 2.28x1.26x0.79in (58x32x20mm)
Weight: 2.01oz (57g)
This product was added to our catalog on April 4, 2023
The GEPRC F722 AIO is equipped with an F722 FC and 35A 2S-6S BLS ESC. This AIO stack adopts MCU STM32F722, which gives a powerful performance and higher computing speed. It features 5 full UART ports and can connect more external devices. GEPRC designed a 6-pin connector for the DJI Air Unit, just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst), supports 2-6S lipo batteries, and brings the drone a stronger flight performance. Support OSD parameter adjustment, buzzer, led, and other functions. It is 8.8g, ultra-lightweight, and 25.5x25.5mm mounting hole, suitable for most of the frames on the market!
Check out all our whoop flight controllers, and our GEPRC products!
Features
MCU: STM32F722, with strong performance and higher computing speed.
It has 5 full UART ports, which connect more external devices
6-pin connector for DJI Air Unit module, and just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst).
Support OSD parameter adjustment, buzzer, led, and other functions.
8.8g ultra-lightweight
25.5x25.5mm mounting hole, suitable for most frames
Specifications
GEPRC F722 AIO
Model Name: GEP-F722-35A AIO
MCU: STM32F722
IMU: BMI270/42688
Firmware target: GEPRC_F722_AIO
OSD: Betaflight OSD w/ AT7456Ev
UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
Beeper: YES
LED: YES
USB: Micro USB
BEC output: 5V@1A
Integrated LC Filter
ESC MCU: 8BB21F16G
Continuous current: 35A
MAX current: 40A (10s)
Input: 2-6S
Supports: Dshot600, Oneshot, Multishot
BlackBox: 16Mb
Target: G_H_30
Size: 32x32mm Board
Installing Hole: 25.5x25.5mm, M2
Weight: 8.8g
Includes
1x GEP-F7-35A AIO
1x XT30-7CM-18AWG Power cables
1x 35V220UF capacitance
1x SH1.0-6Pin to GH1.25-8Pin cables
8x M2*6.5mm Damping ring
Introducing... the GEPRC SMART 16 Freestyle Frame Kit!
The GEPRC Smart 16 1.6" Nano Freestyle Frame is a tiny, lightweight freestyle FPV addition to the GEPRC Phantom series. The SMART 16 continues the consistent lightweight design concept of the Phantom series. The 1.5mm carbon fiber arm, with a 1mm top plate, creates a balance point that is maintained between the strength of the fuselage and the weight of the whole drone which allows it to be lightweight and tough at the same time. The M1.4 Motors mounting holes can be used to install small 3-hole brushless motors to reduce the weight of the body. Good arm width contributes to high durability. This design is great for freestyle flying, with no props in view!
Thanks to the 3D printed parts, the frame weighs only 8.5g, saving a lot of overall weight. The independent battery compartment is designed to stick the battery on top and below the drone making it very convenient and fast to replace batteries.
Check out our other Micro frames And our whole GEPRC product line!
Specifications
Frame Style: Toothpick
Top plate thickness: 1.0mm
Bottom plate thickness: 1.5mm
Camera plate thickness: 1.0mm
Stack Size 16x16mm
Motor Mount: 6mm Tri 08xx
Camera Mount: 14mm Nano
Weight: 8.5g (including 3D prints)
Recommended:
Motor: GEPRC SPEEDX2 0803 11000Kv Micro Motor
AIO: GEPRC F4 V1.4 2-4S AIO Flight Controller
Prop: HappyModel Gemfan 1610 Bi-Blade 40mm Micro/Whoop Prop 4 Pack
LiPo: RDQ Series 350mah 2S 50C/100C 7.6V HV XT30 Micro Battery
Includes
1x GEPRC SMART 16 1.5mm Bottom Plate
2x GEPRC SMART 16 1mm Camera Plate
1x GEPRC SMART 16 1mm Top Plate
2x 120mm LiPo Strap
1x 3D Printed Part Set
1x Screwdriver Set
1x Hardware Set
2x Battery Pad
Get the very best no prep RC drag racing battery with this True 225C rated Graphene V2 LiPo battery. This new graphene V2 technology holds higher voltage under load compared to previous versions.
It has an even lower internal resistance and offers extremely high voltage retention under load. Due to the high discharge rate, it is only offered with a QS8 anti-spark female connector or 8mm bullets and 8 gauge high-amp draw wire to take full advantage of the performance capability. This quad core pack divides the power draw using 4 cells in parallel instead of 1 for higher voltage under load and lower track times. Custom color options are available upon request at no additional charge.
Specifications:
5800mah capacity
8 gauge ultra high strand count wire
Internal copper bus bars
Quad core(4P)
2S 7.4 volts
True 225C rating
Lifetime warranty
5C fast charge capable
100% waterproof
Built today with factory fresh cells and JST-XH balancing tap
QS8 anti-spark female connector strongly recommended(choose from drop-down menu)
69mm x 35mm x 76mm, 385g
HAKRC bring us another serious contender in whoop sized AIO boards. With an F722 flight controller and 40 Amp ESC on board, this AIO is sure to keep even the most powerful quads flying well. This AIO also features both internal and external USB.
Check out our other AIO boards and maybe even some nice motors to finish off your build.
Features
The PCB adopts high-end 8-layer 2oZ thick copper skin, which has stronger over-current capability and good heat dissipation
MOS adopts imported 40V high current resistance MOS, long life and strong load capacity
Industrial grade LDO, high temperature resistance
High-quality Japanese Murata capacitors, strong filtering performance
Internal and External USB
Specifications
Flight Controller
Input Voltage: 2S-6S
MCU: STM32F722RET6
IMU: MPU6000
OSD: AT7456E
UARTs: 5
Flight control firmware version: HAKRC F722D
BEC: 5V/3A
Sensor: Built-in current sensor
Barometer: integrated
LED: Support WS2812 and other programmable
Compatible receivers: CRSF / Frsky/ Futaba/ Flysky/TBS Crossfire/ DSMX: DSM2 receiver
Dimensions: 32x32mm (25.5mm-26.5mm mounting hole)
ESC
Input voltage: 2S-6S
Continuous current: 40A
Peak current: 50A
Firmware version: BLHELI _S (G- H-30)
Current meter proportional value: 450
Protocol support: PWM, Oneshot125, Oneshot42,Multishot, Dshot150, Dshot300, Dshot600
Includes
1x HAKRC F722 AIO Whoop/Toothpick Flight Controller w/ 2-6S 8Bit 40A ESC
1x XT30 power cord
1x Type-C USB small board
1x SH1.0/7P single-head cable
1x 270uf/35V capacitor
4x Yellow shock-absorbing balls
Wiring Diagram
HAKRC bring us another serious contender in whoop sized AIO boards. The HAKRC F7220 2-6S BL-Heli32 bit ESC AIO Flight Controller. This ultra-powerful 20x20mm board is capable of handling the most demanding of tasks, including tons of power delivery such as pad options for 5V/3A & 10V/2.5A BEC delivering unbeatable performance and reliability. Give your quad those high quality parts for a better longevity for your quads.
Check out our other AIO boards and our other HAKRC products for sale at RaceDayQuads!
NOTE:
After upgrading the firmware of HAKRC F7220 AIO, the sensor direction needs to be changed
1. Connect FC to BF and select “configuration” page.
2. In the “flight control and sensor direction” column on the right side of the configuration page, change the first gyroscope to cw 90
3. on the setup page. Calibrate the flight control accelerometer and reset the z-axis and test whether the flight control roll, pitch and yaw are consistent with the BF feedback direction.
4. please check and make safety preparations before takeoff in an open or relatively safe place to test the flight feasibility.
5. If you use the DJI remote control and the DJI FPV glasses, open the serial data receiver Port 2 and MSP Port 6, as shown below:
Features
The PCB adopts high-end 8-layer 2oz thick copper skin, which has stronger over-current capability and good heat dissipation
MOS adopts imported 40V high current resistance MOS, long life and strong load capacity
Industrial grade LDO, high temperature resistance
High-quality Japanese Murata capacitors, strong filtering performance
Size: 40x30mm (20mmx20mm mounting hole)
Product net weight: 10g
Specifications
Flight Controller
Input Voltage: 2S-6S
MCU: STM32F722RET6
IMU: ICM42688
OSD: AT7456E
Black box: 16M
UARTs: 5
Barometer: integrated
Flight control firmware version: HAKRC F722D
BEC: 5V/3A
BEC:10V/2.5A
Sensor: Built-in current sensor
Firmware Target: HAKRCF722D
LED: Support WS2812 and other programmable
Compatible receivers: CRSF / Frsky/ Futaba/ Flysky/TBS Crossfire/ DSMX: DSM2 receiver
Dimensions: 40x30mm (20mmx20mm mounting hole)
ESC
Input voltage: 2S-6S
Continuous current: 40A
Peak current: 50A
Firmware: BLHeli_32
Firmware Target: HAKRC_AT4G_Multi_32_9.Hex
MOS Model: 7140
PWM：24-128K
Protocol support: PWM, Oneshot125, Oneshot42,
Multishot, Dshot150, Dshot300, Dshot600
Continuous current: 40A
Peak current: 45A
Includes
1x HAKRC F7220 2-6S AIO Whoop/Toothpick Flight Controller w/ 40A 5V/3A & 10V/2.5A BEC
1x XT60 H-M
1x Capacitor
4x Purple Gummies
2x Power lead
1x Plug harness
Wiring Diagram
The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at RaceDayQuads!
Features
PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.
MOS adopts imported high current resistance MOS, long life with strong load capacity.
Adopt industrial grade LDO, high temperature resistance.
Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance
PWM frequency up to 128k, high frequency for higher throttleRuns smoother.
Specifications
ESC firmware: HAKRC_AT4G_Multi_32.9 Hex
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-8S Lipo
Continuous current: 60A
Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g
Includes
1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable
4x M3 Grommets.
4x M2 Grommets
The HappyModel BNF 1S Mobula 7 HD Whoop version is a light and efficient 75mm brushless whoop which provides 1080P HD video recording functionality. HappyModel added blackbox for this 1s 75mm HD recording whoop so that you now have gyroflow functionality. Unlock the ultimate smooth flights with a combination of the Mob 7 HD and gyroflow!
Check out the rest of pre-built quads and our HappyModel selection!
Specifications
HappyModel X12 AIO
Input Voltage: 1-2S
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Gyro: MPU6000 or ICM20689 or BMI270
Max Continuous Current: 12A
VTX Output Power: 25-400mW
Antenna Connector: U.FL
OSD: Yes
Betaflight Target: ELRS Version: CRAZYBEEF4SX1280, PNP Version: CRAZYBEEF4DX
ESC Firmware: Z_H_30_REV16_7
Mounting Pattern: 25x25mm
Weight: 5.1g
HappyModel RS Motor
Input Voltage: 1S
KV: 20000KV
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Motor Dimension: Φ10.5x13.5mm
Wire length(include connector): 30mm
Weight: 2g
Runcam Split 3 Lite
Video Resolution: 1080@60fps/1080@50fps/1080@30fps/720@60fps
Field of View(FOV): Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video File Format: MOV
Image Resolution: 2MP
Signal System: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Includes
1x HappyModel BNF 1S Mobula 7 HD Whoop
HappyModel has been an amazing company, bringing us FPV enthusiast quality whoops to fly. Take a look at HappyModels first ever whoop on a 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propellers, all together gives this whoop an amazing performance for an extremely smooth flight.
Choose between PNP (No RX) and BNF (ELRS SPI 2.4)
Be sure to check out all our pre-built quads, and all our Happymodel products!
Features
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw
ELRS V2.0 (Default), can be flashed to ELRS V3.0
EX1103 KV110000 motors
CaddxFPV Ant FPV camera
Smooth and powerful
Compatible for 1S-2S Lipo/LIHV battery
3D Printed Camera Lens Protector
User Manuals
ELRS (SPI)
PNP (No RX)
Specifications
Brand Name: Happymodel
Motor: EX1103 KV11000
AIO: X12 5-IN-1 AIO flight controller
Camera: CaddxFPV Ant FPV camera
Prop: Genfan 2023-3 propellers
Weight: 42.7g
Input Voltage: 1-2S
Wheelbase: 85mm
Size: 120mmx120mmx50mm
Motor Specifications
Model: EX1103 KV11000
Configuration: 9N12P
Stator Diamter: 11mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.xLen): Φ13.5mmx15.5mm
Weight(g): 3.8g
No.of Cells(Lipo): 1-2S
Propeller Specifications
Weight: 0.88g
Material: PC
Pitch: 2.3inch
Props Dia: 52.17mm
Center Thickness: 5mm
Center Hole Dia: 1.5mm
Flight Controller Specifications
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or ICM42688P(SPI connection)
Mount hole size: 25.5mm x 25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Firmware target: Z_H_30
Default protocol: DSHOT300
Support Bluejay firmware
Onboard SPI ELRS 2.4GHz Specifications
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Could flash FC firmware to support ExpressLRS v3.0 TX module
PNP Version Specifications
Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input
Includes
1x HappyModel BNF Mobula8 1-2S Brushless Analog Whoop - Choose Your Receiver
1x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW)
1x Screw Driver
1x Extra camera canopy
Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an amazing DJI O3 Air Unit and Micro Cam, as well as Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. Get the perfect HD experience with the Mobula8!
Be sure to check out all our pre-built quads, and all our Happymodel products!
Specifications
Camera/VTX: DJI O3 Air Unit
Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
Size: 120mmx120mmx50mm
Brand Name: Happymodel
Wheelbase: 85mm
FLIGHT CONTROLLER
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 470
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
Power supply: 1-2S battery input (DC 2.9V-8.7V)
GYRO Sensor: BMI270 (SPI connection)
Built-in 12A(each) Blheli_S 4in1 ESC
Mount hole size: 25.5mm x 25.5mm
Built-in Serial ExpressLRS 2.4G
Model: Crazy F405 ELRS HD
Built-in BMP280 Barometer
Built-in 8MBp black box
ONBOARD UART ELRS 2.4GHZ RECEIVER
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
Could update firmware via ExpressLRS configurator
Antenna: enameled copper wire 31mm length
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Telemetry output Power: <12dBm
RF Frequency: 2.4GHz
ONBOARD 4-IN-1 ESC
Current: 12A continuous peak 15A (3 seconds)
Factory firmware: Bluejay ESC V0.19
Support BLHeli_S Bluejay firmware
Power supply: 1-2S LiPo/LiPo HV
Default protocol: DSHOT300
Firmware target: Z-H-30
MOTORS
Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
Mode: EX1103 11000Kv
Shaft Diameter:Φ1.5mm
No.of Cells(Lipo):1-2S
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Weight(g):3.8g
PROPELLERS
Center Hole Dia:1.5mm
Center Thickness:5mm
Props Dia:52.17mm
Weight:0.88g
Pitch:2.3inch
Material: PC
Includes
1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance.
Be sure to check out all our pre-built quads, and all our Happymodel products!
Specifications
Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
Size: 120mmx120mmx50mm
Brand Name: Happymodel
Wheelbase: 85mm
FLIGHT CONTROLLER
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 470
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
Power supply: 1-2S battery input (DC 2.9V-8.7V)
GYRO Sensor: BMI270 (SPI connection)
Built-in 12A(each) Blheli_S 4in1 ESC
Mount hole size: 25.5mm x 25.5mm
Built-in Serial ExpressLRS 2.4G
Model: Crazy F405 ELRS HD
Built-in BMP280 Barometer
Built-in 8MBp black box
ONBOARD UART ELRS 2.4GHZ RECEIVER
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
Could update firmware via ExpressLRS configurator
Antenna: enameled copper wire 31mm length
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Telemetry output Power: <12dBm
RF Frequency: 2.4GHz
ONBOARD 4-IN-1 ESC
Current: 12A continuous peak 15A (3 seconds)
Factory firmware: Bluejay ESC V0.19
Support BLHeli_S Bluejay firmware
Power supply: 1-2S LiPo/LiPo HV
Default protocol: DSHOT300
Firmware target: Z-H-30
MOTORS
Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
Mode: EX1103 11000Kv
Shaft Diameter:Φ1.5mm
No.of Cells(Lipo):1-2S
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Weight(g):3.8g
PROPELLERS
Center Hole Dia:1.5mm
Center Thickness:5mm
Props Dia:52.17mm
Weight:0.88g
Pitch:2.3inch
Material: PC
Includes
1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfect for Tinywhoop/Cinewhoop/Toothpick. Betaflight/INAV compatible. 3 sets UARTs, 5V/3A & 9V BECs, barometer. Get performance to elevate your FPV. Experience exceptional agility and power for your racing and freestyle sessions. With this board, you'll have the perfect setup to take your flight to the next level.
Browse the rest of our Whoop AIO Boards and our Happymodel gear.
Specifications:
Brand Name: Happymodel
Item Name: CrazyF405HD ELRS 1-2S AIO Flight controller
Mount size: 25.5mmx25.5mm
Weight: 4.8g without power lead wire
Firmware target: BetaflightF4
Support 1-2S Lipo/LiHV battery
FLIGHT CONTROLLER
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 470
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
Power supply: 1-2S battery input (DC 2.9V-8.7V)
GYRO Sensor: BMI270 (SPI connection)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Serial ExpressLRS 2.4G
Model: Crazy F405 ELRS HD
Built-in BMP280 Barometer
Built-in 8MBp black box
ONBOARD UART ELRS 2.4GHZ RECEIVER
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
Could update firmware via ExpressLRS configurator
Antenna: enameled copper wire 31mm length
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Telemetry output Power: <12dBm
RF Frequency: 2.4GHz
ONBOARD 4-IN-1 ESC
Current: 12A continuous peak 15A (3 seconds)
Factory firmware: Bluejay ESC V0.19
Support BLHeli_S Bluejay firmware
Power supply: 1-2S LiPo/LiPo HV
Default protocol: DSHOT300
Firmware target: Z-H-30
*When using 1s battery and high KV 0702/0802 motors, should set the startup power to 1100/1200
Includes
1x HappyModel Crazyf405 ELRS HD 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & ELRS 2.4GHz RX
1x Power lead with a XT30 Connector
Wiring Diagram
The Happymodel SE0702 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" Toothpick style drone.
Check out our other micro motors, and all our HappyModel selection!
Specifications
Kv: 11000Kv
Input Voltage: 1SS LiPo
Configuration: 9N12P
Motor Dimensions: Φ13.5mm x 15.5mm
Stator Dimensions: Φ11mm x 3mm
Shaft Diameter: Φ1.5mm
Mounting Pattern: Φ7mm
Weight: 3.8g
Includes
1x HappyModel EX1103 11000Kv Micro Motor
4x Motor Screws
Note: this motor is sold by HappyModel as a mix of CW & CCW options. These should be interchangeable, but if for some reason the rotation of the motor is not going the direction you desire, then you can simply reverse the settings in BLHeli or swap any two motor wires to reverse the direction.
Turn your Mobula7 from amazing to amazingly tough! Happymodel has redesigned the Mobula7 frame, making it more rigid and durable and adding some new features. The frame has slots to hold the Super Tiny LED Strip Board and the battery holder can now hold 2S and 3S packs!
The V3 frame will also fit the new Mobula7 HD.
Here's some other upgrades and spares to go with your new frame.
Specification
Wheelbase: 75mm
Weight: 5.5g
Color: Clear or Black(for Mobula7 HD)
Compatibale with: Happymodel 2S 300mah, RDQ 2S 300mah, and the new RDQ 350 2S
