64077-3, Traxxas XO-1 1/7 RTR Electric 4WD On-Road Sedan w/2.4GHz TQi Radio, TSM, Link Module & Castle ESC Traxxas XO-1 1/7 RTR Electric 4WD On-Road Sedan - 100mph RC Car The Traxxas XO-1 is the fastest and most outrageous Ready-to-Race RC car ever created. From a dead stop, 60mph flashes by in 2.3 seconds. Keep the throttle pegged and you’ll smash the 100mph barrier in 4.92 seconds**. Improvements to the aero package make XO-1 even easier to drive at the limit and more fun than the previous model. Plus, tires rated to 100mph and a genuine Castle Creations Mamba Monster Extreme ESC round out the package to create one of the most thrilling RC cars to ever hit the pavement. Features: Stable Aerodynamics: From top to bottom, XO-1 is a masterwork of intelligent aero design. The sculpted supercar body slices through the wind for record-breaking speed. Redesigned high-downforce canards on the front splitter and a revised rear wing provide superior high-speed stability. A high-tech NACA duct under the chassis routes cool air around the motor with a rear body vent for hot air to escape. 100+mph Top Speed: The Traxxas XO-1 is a brutally fast hypercar intended for only the most experienced drivers. Aerodynamic improvements make XO-1’s performance more accessible than ever before with predictable straight-line performance and confidence-inspiring handling. Belted slick tires and a revised rear wing keep the XO-1 glued to the pavement whether you’re testing its top speed potential or carving up a tight race course. Big Block Power: XO-1’s legendary speed wouldn’t be possible without explosive power and XO-1 brings big-block 6s brushless horsepower to the table. Weighing almost two pounds, the massive Traxxas Big Block motor pumps out supercar speed and gut-wrenching torque for brutal acceleration. The finely-tuned Mamba Monster Extreme ESC delivers 25+ volts of ferocious power with scalpel-like precision. 6061 Aluminum Chassis Core: Constructed of lightweight 6061 aluminum, XO-1's lower chassis adds superior strength and doubles as a heat sink for the power system.  Computer Optimized Aerodynamics: XO-1 sets the standard for high performance air management with its redesigned front splitter and high downforce canards. Combined with the revised high downforce rear wing, they strike the perfect balance between the front and rear for maximum stability in the critical 30-70mph zone. A high tech NACA duct supplies cool air to the motor with a rear vent in the body to evacuate heat for peak efficiency. Extruded Aluminum Driveshaft: XO-1's extruded center driveshaft is lightweight and incredibly strong. Internal splines fit securely onto the input shafts of the front and rear drive assemblies for slip proof grip. Mamba Monster Extreme Speed Control: Traxxas partnered with Castle Creations to develop the Mamba Monster Extreme speed control. From its integrated capacitor bank to the proprietary software created just for XO-1, the Mamba Monster Extreme represents the state of the art in big volt power delivery.  Traxxas Big Block Brushless Motor: Weighing nearly two pounds, the Traxxas Big Block motor is the largest brushless motor ever fitted in a Traxxas model. The big block features a finned, heat dissipating can, oversize premium bearings, and powerful sintered Neodymium magnets for massive acceleration and supercar performance.  Speed Rated Belted Tires: XO-1's slick tires are the first to be rated for 100+ mph. Zero stretch belting reinforces the soft compound rubber with foam inserts to support the tread. The tires come pre-glued to extra wide black chrome split spoke wheels for maximum traction. Traxxas TQi Radio System: The fully featured TQi 2.4GHz radio system delivers superior speed, precision and long distance control. The transmitter uses Bluetooth to connect to your smart phone using the INCLUDED TRA6511 wireless module. The Traxxas Link app allows you to adjust your settings and view real time telemetry. Traxxas Stability Management: Traxxas Stability Management (TSM) works behind the scenes to keep XO-1 arrow straight during full throttle acceleration and heavy braking. TSM allows you to drift your car controllably around a track, while helping to prevent spinouts and loss of control on slippery surfaces. Adjust the amount of assistance from off, to 100% right from your transmitter. Installed Real Time Telemetry: XO-1 comes fully outfitted with pre-installed telemetry sensors to collect and record real time telemetry data as you drive. Connect your mobile device and the Traxxas Link dashboard comes to life in vibrant color showing you speed, battery voltage, RPM and temperature with fully customizable gauges.  Large 1/7 Scale Size: At a full 27 inches long and 12 inches wide, XO-1 commands attention on the road. Its extra large footprint improves stability, increases traction, tolerates road imperfections, and delivers high speed handling that no 1/10 touring car can match. NOTE: The XO-1 is not a toy and is intended for use by experts only. Be sure to read and understand all warnings and precautions that accompany the product. *Unlock the 100+mph speed only with the Traxxas Link App. High-speed gearing and speed wing (included), and two 3-cell 5000mAh Power Cell LiPo battery packs (part TRA2872, sold separately) are required for 100+mph operation. **Unlocking 100+mph speed capability requires the Traxxas Link Application installed on your Android or iOS-equipped mobile device. For device compatibility and to download the free app, please visit Google Play or the App Store. Specifications: Length: 27 inches (686mm) Front Track: 11.81 inches (300mm) Rear Track: 11.81 inches (300mm) Ground Clearance: 0.59 inches (15mm) Weight: 8.6lbs (3.9 kg) (w/o batteries) Width (overall): 13.0 inches (329mm) Height (overall): 5 inches (127.5mm) Wheelbase: 15.9 inches (404mm) Shock Length: 3.3in (83mm) front, 3.4in (86mm) rear Front Tires (pre-glued): Belted slick 4.29in (109mm) x 1.7in (43mm) Rear Tires (pre-glued): Belted slick 4.29in (109mm) x 2in (51mm) Overall Drive Ratio: 9.36 (stock, out-of-box) Wheels (front & rear): 3.3in (84mm) Split-Spoke™ (black-chrome) with 17mm splined hex Overall Drive Ratio: 9.36 (stock, out-of-box) Battery Tray Dimensions: 155mm / 50mm / 29mm (adjustable height and length) Transmission: Single-speed with Cush Drive™ Differential Type: Sealed hardened steel bevel Gear Pitch: Module 1.0 Drive System: Shaft-Driven 4WD Receiver: TSM® Receiver (TRA6533) Servo: TRA2075 High Torque Waterproof Top Speed: 50+mph out of box; 100+mph with high-speed wing, speed gear, and Traxxas Link app unlock Skill Level: 10 Needed to Complete: (2) Traxxas iD® Power Cell LiPo batteries (LiPo, 3-Cell 5,000 mAh) Traxxas iD® LiPo Battery Charger (4) "AA" batteries (transmitter)  This product was added to our catalog on August 2, 2022

Read more less

ARA7116V2, Arrma Limitless V2 1/7 Scale Speed Bash Electric 4WD All-Road Roller Using an optimized 8s power layout this V2 Limitless offers next level performance for the ultimate in speed and power. Able to run the full size 1/4 mile run in the 8 second range this vehicle is extremely capable. Coming as a pre-assembled roller you have the option to choose your own electronics giving you the ability to go from mild to wild in the power department. With a sleek design, 8s capable drivetrain and outrageous top speed capabilities the updated Limitless V2 offers a driving experience like no other.  This model is capable of an incredibly high rate of speed, and it is not recommended for inexperienced drivers. Previous experience with high-power radio controlled models is highly recommended. This model is not intended for use by children or minors younger than 16 years old. Individuals younger than 16 years old require responsible adult supervision during operation and maintenance. Additionally, when driving this model up to a 1/4 mile of traffic free, uninterrupted driving area could be required. The space in which you choose to drive should based on the setup of the model, and the potential top speed of the car. Updated Features Include: Easy-access sliding motor mount accepts larger diameter motors 3mm Chassis plate repositions the motor mount to also accept longer motors 39T Mod 1.0 Spool with long rear outdrive combines with a shorter rear center driveshaft to reduce drivetrain vibration Easy-access electronics module accepts larger ESCs and includes a waterproof* receiver box Safe-D input cups are included on the front and rear gearboxes GP5 gears have a lower ratio for reduced centerline drivetrain speed and vibration Wider rear track increases stability Stiffer front springs and sway bar improve high-speed handling The first ARRMA “Rattle Can Roller” includes a clear, low-drag body for your own unique paint scheme — window mask and decals are provided Specifications: Product Length: 28.74" (730mm) Product Width: 12.28" (312mm) Product Height: 6.5" (165mm) Product Weight: 8.6lb (3.9kg) Front Track: 12.2" (310mm) Ground Clearance: 0.59" (15mm) Inner Tire / Outer Wheel Diameter: 3.27" Wheel Width: 1.69" (43mm) Internal Gear Ratio: 2.8:1 Spur Gear: 39T Differential: Two Oil-Filled Metal Gear Diffs Drivetrain: 4WD Shock Type: 3.03" (77mm) FR, 3.43" (87mm) RR. Aluminum Oil-Filled Tire Compound: White Wheel Hex Size: 17mm Tire Tread: Hoons Vehicle Type: All-Road Approximate Assembly Time: 1-3 Hours Body: LIMITLESS. Supplied Clear & Trimmed. Decal Sheet Included. Brakes: Integral with ESC (ESC Sold Separately) Scale: 1/7 Includes: (1) ARRMA® LIMITLESS 1/7 Scale All-Road Speed Bash Roller (1) Customizable Clear Body and Nose Cone (1) Decal Sheet (1) Window Mask Sheet (1) Product Manual Needed to Complete: (1) 2+ Channel Transmitter and Receiver (1) Metal Gear, Hi-Torque Steering Servo (23T Spline, Standard Size) (1) Electronic Speed Control (8S recommended) (1) Motor (50 Series – Max dimensions 4.33X1.97") (2) 4S LiPo Battery (1) Compatible LiPo Battery Charger (1) Mod 1 Pinion Gear (to suit chosen motor) This product was added to our catalog on September 17, 2022

Read more less

ARA7612, Arrma Big Rock 6S BLX 1/7 RTR 4WD Electric Brushless Monster Truck w/SLT3 2.4GHz Radio Built on the proven 6S BLX platform and supersized to 1/7 scale, the ready-to-run Big Rock 6S BLX 4x4 blasts like only a large-scale Arrma RC monster truck can, especially when amped up with Spektrum brushless power and topped with an eye-catching crew cab body. Featuring loads of realistic scale details and "stealth" black-anodized aluminum parts, the Arrma Big Rock 6S BLX is big, fierce, fast, and tough. Its 6S LiPo capable brushless power system includes a highly efficient Spektrum Firma 2050kV brushless motor that's perfectly matched to a Spektrum Firma 150A Smart V2 waterproof ESC with IC5 connectors. The ESC has been updated to deliver more punch and an improved driving feel. Install the supplied, optional speed pinion, and the Big Rock 6S BLX can reach incredible 65+ mph speeds in optimum driving conditions. From the reinforced, black-anodized 6061-T6 aluminum chassis to the independent suspension with adjustable, aluminum-bodied, oil-filled shocks, the characteristically durable Arrma design lets you fearlessly tackle all terrain and all conditions. The metal drivetrain, steel driveshafts, and metal-geared Spektrum S665 digital steering servo all work together to bring out the full bashing potential of 6S brushless power. The Big Rock 6S BLX RTR's long, scale body marks the epitome of rugged truck style. An easy-to-use, clipless front body mount system preserves its incredibly detailed scale looks, and an integrated roll hoop and bed add more Arrma toughness. Massive, vented dBoots Ragnarok V2 tires on five-spoke wheels complement the scale looks, and the tires' aggressive tread gets the grip you need for high speeds and easy handling over a wide variety of surfaces. Assembled, finished, and complete with high-quality Spektrum SLT3 radio system, the Arrma Big Rock 6S BLX RTR requires only your choice of the recommended LiPo batteries and charger before delivering a big brushless performance with incomparable scale style. Features: Updated 6S LiPo capable Spektrum brushless power system All-metal differential outdrives and gearbox internals Heavy duty steel driveshafts throughout Center body support and brace for maximum durability Black anodized aluminum chassis Black anodized CNC-machined aluminum shock towers Oil-filled black anodized aluminum adjustable shocks Easy-to-use clipless front body mount system to preserve scale looks Integrated roll hoop and bed Detailed scale looks with three factory-finished body color choices Specifications: Completion Level: Ready To Run Scale: 1/7 Input Voltage: 4S-6S LiPo Battery Drivetrain: 4WD Motor Size: 4074-2050kV Pinion Gear: 13T Spur Gear: 50T Gear Pitch: 1.0MOD Length: 24.61" (625mm) Width: 18.31" (465mm) Height: 10.04" (255mm) Wheelbase: 16.61" (422mm) Weight: 14.33lb (6.5kg) without Battery Wheel Hex Size: 17mm Connector Type: IC5 Includes: (1) Big Rock 6S BLX 1/7 RTR 4WD Electric Brushless Monster Truck Product Manual Needed to Complete: LiPo Battery: (1) 4S Hard Case LiPo Battery with (IC5 or EC5) (1) 6S Hard Case LiPo Battery with (IC5 or EC5) (1) Compatible Charger (4) (AA) Batteries for Transmitter This product was added to our catalog on December 21, 2023

Read more less

ARA7615V2, Arrma Infraction V2 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Truck w/DX3 2.4GHz Radio, Smart ESC & AVC The Arrma Infraction V2 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Truck is ideal for intermediate-level drivers who are eager to experience street bashing at 80+ MPH speeds (achievable in optimum conditions using a 6S LiPo and the included speed pinion gear). Its Spektrum DX3 radio and Smart brushless power system components provide real-time telemetry that also helps you reach and maintain maximum performance. Another feature to the INFRACTION 6S BLX 4WD is a handbrake. The chassis includes a module for a rear vented disc brake and a powerful Spektrum SPMS650 brake servo. You control the handbrake from a convenient switch on the DX3 transmitter for thrilling drifting, "hooning" and stunt action. With its 4X4 traction, you can run the INFRACTION 6S BLX 4WD on all roads, in all conditions — over loose gravel, asphalt, smooth dirt, and short grass, in the sun, rain, and ice — while enjoying fresh RESTO MOD looks. The street body arrives factory-finished with new matte gloss effect designs. The included tunable wing lets you customize the downforce just the way you want it. To further enhance the aerodynamics, the chassis includes a full-width front splitter that balances downforce distribution. A rear diffuser increases downforce and grip, enabling you to corner faster and with confidence. Mounted on realistic 5-spoke wheels, the four dBoots Hoons all-road tires keep their grip on the surface to pour on speed or stop on a dime. Underneath those streamlined Street Bash looks is a chassis which proves to the world, once again, that ARRMA® builds the most durable bashers. The 6061-T6 anodized aluminum chassis houses a heavy-duty drivetrain with steel driveshafts, plus all-metal diff outdrives and gearbox internals. Updated internal gears feature a new tooth profile for increased strength. A lower internal gear ratio reduces the center line transmission RPM, reducing the center drive shaft resonance and increasing drivetrain durability. Chassis toughness is reinforced with a center brace. Bearings are rubber-shielded, and the adjustable, oil-filled, anodized aluminum shocks are mounted on strong, black-anodized aluminum shock towers. ARRMA has equipped the ready-to-run INFRACTION 6S BLX 4WD with the 3-channel Spektrum DX3 radio and an SR6110AT receiver featuring AVC (Active Vehicle Control) technology for high-speed stability. A convenient voltage level indicator is built into the transmitter which lets you easily track on-board Smart battery power. The vehicle's brushless power system also features Spektrum Firma Smart components, so it's easy to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Just download the Spektrum Dashboard app for iOS or Android, available for free at the App Store or Google Play. Features: Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) Compatible with Spektrum® Dashboard™ app for iOS or Android ARRMA® ADS-15M Waterproof Steering Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® SPMS650 Waterproof Brake Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® Firma™ 150A Smart ESC Spektrum® Firma™ 4074 2050Kv Brushless Motor with Safe-D pinion gears New electronics module New mechanical handbrake feature Fresh street body look with matte gloss effect designs Tunable wing for customizing the downforce Full-width front splitter balances downforce distribution Rear diffuser increases downforce and grip for cornering faster and with confidence Adjustable front and rear body mounts 3mm Plate, 6061-T6 anodized aluminum chassis Center brace for maximum durability Heavy-duty drivetrain with durable steel driveshafts throughout High-speed center driveshaft support Rubber-shielded bearings All-metal diff outdrives and gearbox internals Updated internal gears with new tooth profile for increased strength Lower internal gear ratio to reduce the center line transmission RPM, reducing center drive shaft resonance and increasing drivetrain durability Oil-filled, adjustable, anodized aluminum shocks Black-anodized aluminum front and rear shock towers Waterproof receiver box (For details on waterproof standards, please refer to the product instruction manuals) Large battery trays 5-spoke wheels Durable wheel hubs dBoots® Hoons™ all-road tires 2-year limited warranty (see manual for details) Specifications: Approximate Assembly Time: Less than an hour Ball Bearings: Full set Battery: Sold Separately Battery Tray Dimensions: 5.45 x 1.83 x 1.38 in (138.5 x 46.5 x 35mm) Body: INFRACTION, Screen printed, Decaled, Trimmed Brakes: Metal disc with metal pads Bushing Material: Metal Charger: Sold Separately Chassis: 0.12 in (3mm) Plate, 6061-T6 Aluminum Completion Level: Ready-To-Run Differential: Three oil-filled metal gear Drivetrain: 4WD Drive Type: Forward/Brake/Reverse Final Drive Ratio: 8.58:1 Front Track: 12.13 in (308mm) Power Type: Electric Gear Pitch: 1.0MOD Ground Clearance: 0.59 in (15mm) Internal Gear Ratio: 2.8:1 Max Battery Dimensions: 5.5 x 1.85 x 1.5" (140 x 47 x 38mm) Motor Type: Brushless - Sensorless Pinion: 15T Product Height: 7.87" (200 mm) Product Length: 27.36" (695 mm) Product Weight: 11lbs (4990g) Product Width: 12.2" (310 mm) Radio: Included Rear Track: 12.01 in (305mm) Receiver: Included Scale: 1/7 Servos: Included Shock Type: 3.03 in (77mm) FR, 3.43 in (87mm) RR. aluminum body, oil-filled Speed Control: Included Spur Gear: 46T Suspension: Independent Vehicle Type: On-Road Wheelbase: 15.98 in (406mm) Includes: (1) 1/7 ARRMA® INFRACTION™ Resto Mod Street Bash 6S BLX 4WD RTR (1) Spektrum® Firma™ 150A Smart ESC (installed) (1) Spektrum® Firma™ 4074 2050Kv Brushless Motor (installed) (1) ARRMA® ADS-15M Waterproof* Servo (installed) (1) Spektrum® SPMS650 Waterproof* Brake Servo (installed) (1) Spektrum® SR6110AT AVC Receiver (installed) (1) Spektrum® DX3™ DSMR® Radio (1) Product Manual Needed to Complete: (2) 2S or 3S LiPo batteries Compatible charger Safe LiPo charging bag (4) AA transmitter batteries This product was added to our catalog on April 1, 2021

Read more less

ARA7617V2, Arrma Felony 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Muscle Car w/DX3 2.4GHz Radio, Smart ESC & AVC The Arrma Felony 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Muscle Car is inspired by the muscle cars that shaped the American auto industry in the 1960s and 70s. The Felony is ideal for intermediate-level drivers who are eager to experience street bashing or drag racing at 80+ MPH speeds (achievable in optimum conditions using a 6S LiPo and the included speed pinion gear). With its sleek muscle car body and large rear tires, the FELONY 6S BLX looks right at home blasting at high speeds on-road, over dirt roads and on oval tracks. The multi-part, undercut muscle car body design with an aerodynamically adjustable wing delivers standout street bashing style. It can also be customized with the included accessory kit and decals to provide scale muscle car looks the way YOU want them. The FELONY 6X BLX Street Bash RTR's eye-catching appearance extends to the realistic 5-spoke wheels mounted with dBoots Hoons all-road tires. For authentic muscle car handling, ARRMA engineers have included regular front and larger rear tires, with the front and rear gearbox ratios matched to the tire sizes. Underneath those streamlined Street Bash looks is a chassis which proves to the world, once again, that ARRMA® builds the most durable bashers. The 6061-T6 anodized aluminum chassis houses a heavy-duty drivetrain with steel driveshafts plus all-metal diff outdrives and gearbox internals. Its toughness is reinforced with a center chassis brace. The adjustable, oil-filled, anodized aluminum shocks are mounted on strong, black-anodized aluminum shock towers. Push the throttle to the max — the FELONY 6S BLX Street Bash RTR is made to take it. Speaking of throttle…ARRMA has equipped the FELONY 6S BLX Street Bash 4WD RTR with the 3-channel Spektrum DX3 radio and an SR6110AT receiver featuring AVC (Active Vehicle Control) technology for high-speed stability. A convenient voltage level indicator is built into the transmitter which lets you easily track on-board Smart battery power. The vehicle's brushless power system also features Spektrum Firma Smart components, so it's easy to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Just download the Spektrum Dashboard app for iOS or Android, available for free at the App Store or Google Play. Features: Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) Compatible with Spektrum® Dashboard™ app for iOS or Android ARRMA® ADS-15M Waterproof Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® Firma™ 150A Smart ESC Spektrum® Firma™ 4074 2050Kv Brushless Motor with Safe-D input gears Muscle car handling with regular front and larger rear tires Front and rear gearbox ratios matched to tire sizes Customizable scale muscle car looks Includes interchangeable accessory kit and decals Multi-part undercut body design Adjustable front and rear body mounts Aerodynamically adjustable wing 3mm Plate, 6061-T6 anodized aluminum chassis Center brace for maximum durability Heavy-duty drivetrain with durable steel driveshafts throughout High-speed center driveshaft support Three oil-filled metal gear diffs All-metal diff outdrives and gearbox internals Oil-filled, adjustable, anodized aluminum shocks Black-anodized aluminum front and rear shock towers Front bumper and splitter Rear diffuser with exhaust detailing Waterproof receiver box (For details on waterproof standards, please refer to the product instruction manuals) Large battery trays Five-spoke wheels Durable wheel hubs dBoots® Hoons™ all-road tires 2-year limited warranty (see manual for details) Specifications: Approximate Assembly Time: Less than an hour Ball Bearings: Full set Battery: Sold Separately Battery Tray Dimensions: 7.09 x 2.17 x 2.76" (180x x55 x 70mm) Body: FELONY, Screen printed, Decaled, Trimmed Bushing Material: Metal Charger: Sold Separately Chassis: 0.12 in (3mm) Plate, 6061-T6 Aluminum Completion Level: Ready-To-Run Drivetrain: 4WD Drive Type: Forward/Brake/Reverse Final Drive Ratio: F:8.05:1, R:8.83:1 Front Track: 12.13 in (308mm) Internal Gear Ratio: F: 2.8:1, R: 3.07:1 Max Battery Dimensions: 5.5 x 1.85 x 1.5" (140 x 47 x 38mm) Motor Type: Brushless - Sensorless Pinion: 16T Product Height: 7.56" (192 mm) Product Length: 28.54" (725 mm) Product Weight: 11lbs (4990g) Product Width: 12.91" (328 mm) Radio: Included Rear Track: 12.91 in (328mm) Receiver: Included Scale: 1/7 Servos: Included Shock Type: 3.03 in (77mm) FR, 3.43 in (87mm) RR. Aluminum body, oil-filled Speed Control: Included Spur Gear: 46T Suspension: Independent Vehicle Type: On-Road Wheelbase: 15.98 in (406mm) Includes: (1) 1/7 ARRMA® FELONY™ Resto Mod Street Bash 6S BLX 4WD RTR (1) Spektrum® Firma™ 150A Smart ESC (installed) (1) Spektrum® Firma™ 4074 2050Kv Brushless Motor (installed) (1) ARRMA® ADS-15M Waterproof Servo (installed) (1) Spektrum® SR6110AT AVC Receiver (installed) (1) Spektrum® DX3™ DSMR® Radio (1) Product Manual Needed to Complete: (2) 2S or 3S LiPo batteries w/IC5/EC5 Connectors Compatible charger Safe LiPo charging bag (4) AA transmitter batteries This product was added to our catalog on April 1, 2021

Read more less

ARA7618, Arrma FIRETEAM 6S BLX 4WD Brushless 1/7 Speed Assault Vehicle w/SLT3 2.4GHz Radio The Arrma FIRETEAM 6S BLX Speed Assault Vehicle was developed for off-road domination! The FIRETEAM features an extra long wheelbase and widetrack suspension to deliver footed handling in rough terrain. Built on the 6S BLX platform, this ready-to-run 1/7 scale power house is the first of its kind. In fact, the FIRETEAM 6S BLX is incredibly capable and could very well be the toughest rig in the Arrma 6S BLX family. The aggressive multi-panel body is inspired by military "fast attack" style vehicles used by military and private contractors around the world. The body comes factory-finished in either matte black or matte white camouflage, and features full roll cage beneath to add to the military feel and toughness. The detailed interior carries a four-man crew and is perfect for further personal customization. A special multi-terrain dBoots FIRETEAM wheel and tire combo finishes off the look, while providing drivers with high traction and smooth travel over rough off-road tracks. But once you dig in beneath the impressive body, you see why this model is so unique.  The FIRETEAM is the first Arrma off-road vehicle to include a mechanical handbrake! The mechanical handbrake feature adds a truly unique dimension to the FIRETEAM driving experience. Controlled from the third-channel thumb switch on the included Spektrum SLT3 transmitter, the handbrake allows the vehicle to perform evasive maneuvers, initiating drifts and handbrake turns unlike any electric off road vehicle before! A factory-installed Spektrum 6S brushless system gives the FIRETEAM the power to perform huge jumps, and reach speeds of 60+ mph, while navigating brutal terrain. The extra-long wheelbase and wide-track suspension, along with aluminum oil-filled shocks help to maintain control when the road gets rough. From the bumpers and skid plates to the heavy-duty metal drivetrain, this bomb proof ARRMA design gives you the tools necessary to blast through obstacles that get in your path.  Fully assembled and complete with high-quality Spektrum gear, the FIRETEAM 6S BLX only requires your choice of EC5 or IC5 equipped LiPo batteries and charger to complete the mission.  FIRETEAM 6S BLX Features: Military-styled, multi-panel body in matte black or matte white camo designs Fully detailed interior featuring four FIRETEAM™ crew figures Full body roll cage integrated with the chassis roll hoop, bumpers, and chassis side structures Handbrake module operated by the Spektrum™ SLT3™ radio's third channel Realistic bumpers, skid plates, and side steps Black anodized aluminum shocks, motor mount, and steering parts Aluminum-cased, oil-filled center differential Multi-terrain dBoots® FIRETEAM™ tires featuring a military-inspired wheel and airless design tires Standard 6S BLX Features: Ready-to-Run 60+ MPH (97 km/h) speeds achievable in optimum conditions using a 6S LiPo battery and the include optional speed pinion gear EXB front brace compatible top plate Center body support and brace for maximum durability Durable steel driveshafts throughout Heavy-duty drivetrain Never-loose red aluminum servo saver Anodized aluminum chassis plate Anodized aluminum front and rear shock towers Spektrum™ SLT3™ 3-channel 2.4GHz radio and SR315 dual protocol receiver Safe-D pinion and front and rear input cups Large volume waterproof receiver box Spektrum™ Firma™ 150A Smart waterproof 4S/6S ESC Spektrum™ Firma™ 4074 2050Kv brushless motor Never-pop ball ends 4-Bolt center diff removal Easy-access sliding motor mount for quick motor removal Durable wheel hubs for increased strength Hub nut O-rings Detailed decals IC5® connectors (EC5™ compatible) Spektrum™ S652 steel-geared waterproof digital servo offering 265 oz-in of torque @ 7.4V Heavy-duty suspension arms Rubber shielded bearings All-metal drivetrain Steel spur gear Adjustable steel turnbuckles ARRMA® motor heatsink and fan 2-year limited warranty (see manual for details) Specifications: Battery Tray Dimensions: 158x48x70mm Final Drive Ratio: 17.92 Front Track: 17.71 in (450mm) Rear Track: 17.71 in (450mm) Wheelbase: 16.61" (422 mm) Ground Clearance: 2.76 in (70mm) Product Weight: 13.77 lb (6.26kg) Scale: 1/7 Shock Type: 17.71 in (450mm) Wheel Hex Size: 17mm Wheel Width: 2.55 in (65mm) Includes: (1) ARRMA® 1/7 FIRETEAM™ 6S BLX 4WD Speed Assault Vehicle RTR (1) Spektrum™ Firma™ 150A Smart Waterproof* ESC (1) Spektrum™ Firma™ 4074 2050Kv Brushless Motor (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter (1) Spektrum™ SR315 3-Channel Dual Protocol Receiver (1) Spektrum™ SPMS652 Waterproof* Metal-Geared Digital Servo (1) Handbrake Module with SPMS650 Waterproof* Brake Servo (1) Product Manual Needed to Complete: (2) 2S or (2) 3S LiPo Batteries with EC5™ or IC5® connector (1) Compatible Battery Charger (4) AA batteries for Transmitter This product was added to our catalog on February 10, 2022

Read more less

DISCONTINUED HWI30402950, Hobbywing EZRUN 4985SL 4-Pole 1/6-1/7 Scale Sensorless Brushless Motor (1650kV) Hobbywing EZRUN 4985SL 4-Pole 1/6-1/7 Scale Sensorless Brushless Motor. Specifications: Model: 4985SL-1650KV Pole: 4 KV (No-load): 1650KV Resistance: 0.0053 ? Current (No-load): 5.4 A Max. Output Power: 5700 W Current at the point of M.O.P: 160 A Motor Diamter: 49mm  Motor Length: 86.5mm Shaft Diameter: 5.0mm Shaft Length: 21.5mm LiPo Cells: 3-6 Weight: 587g (20.71oz) Applications: 1/6th & 1/7th RC Vehicles Suitable ESC: Ezrun MAX6 ESC This product was added to our catalog on April 25, 2021

Read more less

Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2) w/Hive 17mm Hex Wheels Arrma Felony 6S BLX Arrma Infraction 6S BLX Arrma Limitless The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. Designed specifically for the rear of 1/7 scale RC vehicles, these Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex. Note: Arrma 1/8 Felony Owners: These are the same diameter as the Felony front tires. Therefore, you need to change the gearing in the rear to match the front gearing. Or, you could have overdrive in the font by not changing Arrma 1/8 Limitless Owners: These fit directly on the rear without any trimming or regearing. The 10mm wider stance enhances rear traction bias as well as providing a meaner look. Arrma 1/8 Infraction Owners: These will work on the rear of the infraction but you will need to trim the fender flares in the rear to accommodate the wider tires. No regearing necessary as they are the same diameter as the stock rear tires. Features: Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics, and hub bearings Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces Generous tread depth for long wear and the ability to easily clear debris Pre-mounted to Hive Wheels Specifications: Tires: Diameter: 3.94in (100mm) Width: 2.13in (54.1mm) Wheels: Hex: 17mm Width: 2.13in (54.1mm) Center Bore: 0.84in (12.3mm) Weight: 5.92oz(168g) Includes: Velociter Belted Tires Hive Wheels Foam Inserts This product was added to our catalog on August 29, 2024

Read more less

PRM157700, Corvette C8 Clear Body Felony & Infraction Product Details Key Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA In The Box Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Quick Links Introduction PROTOform is now proud to bring one of the most anticipated cars Chevrolet® has ever built to the 1:7 scale ARRMA® Street Bash line of vehicles with the release of the Corvette™ C8 body for Felony™ & Infraction™. Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA What's Included Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Overview The officially licensed body is the ultimate aerodynamic upgrade to the popular Felony™ platform, whether you are making speed runs in the back roads or drifting in the parking lot. All the exceptional details of its 1:1 counterpart including aggressive cab-forward design, sculpted side doors, and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette™ badges, windshield headers, "Jake" skulls, and USA flags. Also included are a custom add-on front splitter and rear wing to complete the super-scale look. The C8 is formed from durable 1.5mm thick high-quality polycarbonate with paint-then-peel overspray film. This body was designed with wider rear fenders as a direct fit for the Felony™ to clear the 53/107 tires. It will work with Infraction™ rear tires, but to get the optimal look and fit, you can optionally choose to either widen the rear of your Infraction™ chassis with stock rear tires or use Felony™ rear tires with modifications to the rear gear ratio. See the fits section below for the list of parts needed for these modifications. General Motors trademarks used under license to Pro-Line.Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. ©2020 Pro-Line Racing. ARRMA®, Felony™, and Infraction™ are trademarks or registered trademarks of Horizon Hobby®, LLC. All other trademarks, service marks and logos are property of their respective owners. Fits: ARRMA® Felony™ ARRMA® Infraction™ with: STOCK REAR TIRES - PARTS LIST Rear Hubs (2pcs): AR330404 Axles (8x45mm) (2pcs): AR310591 Hexes (16.5mm) (2pcs): AR310484 FELONY™ REAR TIRES - PARTS LIST (V1 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Front Input Shaft Cup (Safe-D): ARA310977 Front Input Shaft Cup Sleeve (4pcs): ARA310976 Front Main Input Gear 15T GP5: ARA311016 Front Main Diff Gear 42T GP5: ARA311017 Rear Input Shaft Cup (SAFE-D): ARA310977 Rear Input Shaft Cup Sleeve (4pcs): ARA310976 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 FELONY™ REAR TIRES - PARTS LIST (V2 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 Length:   27.25" (892mm) Width Front:   12.3" (312mm) Width Rear:   13.2" (335mm) Height:   10.1" (257mm) Wheelbase:   7.75" (196mm)       Product Specifications Body Style 2 door coupe Material Polycarbonate Product Height 7.75" (197 mm) Product Length 27.25" (692 mm) Scale 1/7 Vehicle Type On-Road Wheelbase 10.1" (257 mm)

Read more less