Products
RPM RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue)
RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue) This is a set of RPM Front Upper & Lower A-Arms, and are intended for use with the Traxxas 1/16 E-Revo. Upon the release of the 1/16th Scale Traxxas Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With RPM's guaranteed unbreakable material and a proven A-arm design based off of their larger, 1/10th scale Revo A-arms durability for these little powerhouse trucks has finally arrived! Another problem that has been eliminated was slop in the suspension system. In some cases, as much as 1/32” of slop is found in the stock A-arms! That problem has been solved with these new RPM versions. RPM A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result is smoother, more consistent steering and suspension movement with a significantly reduced tendency for the truck to randomly wander while driving. These arms also feature angled leading and trailing edges. RPM incorporates a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms, and are backed by RPM's industry-leading breakage warranty. If it breaks (under normal operating conditions), send it to RPM and they will replace it! This product was added to our catalog on December 16, 2021
$14.95
Traxxas TRA2820X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/2200mAh)
TRA2820X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/2200mAh) This is the Traxxas 2S, 7.4V, 2200mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. High-Current Connector Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards. With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task. The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance. NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection. Features: Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time. Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run. Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times. Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs. Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery. Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models. Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked! Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas TRX-4 Traxxas TRX-4 Specifications: Type: LiPo Total Capacity: 2200 Voltage: 7.4 Continuous Discharge: 25C (55A) Max Burst Rate: 50C (110A) Watt Hours: 16.28 Max Charge Rate: 1C (2.2) Dimensions: 88x21x30mm Weight: 4.2oz (118g) This product was added to our catalog on March 21, 2021
$41.99
Traxxas TRA7033, Traxxas Pivot Balls w/Pivot Ball Caps (4)
TRA7033, Traxxas Pivot Balls w/Pivot Ball Caps (4) Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit This product was added to our catalog on September 7, 2021
$4.50
Traxxas TRA7033X, Traxxas Aluminum Pivot Ball Cap Set w/Tool (Hard-Anodized) (8)
TRA7033X, Traxxas Aluminum Pivot Ball Cap Set w/Tool (Hard-Anodized) (8) Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit This product was added to our catalog on September 7, 2021
$20.00
Traxxas TRA7034, Traxxas Left & Right Axle Carriers
TRA7034, Traxxas Left & Right Axle Carriers This is a set of replacement Traxxas axle carriers, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. This product was added to our catalog or updated on April 4, 2022
$7.00
Traxxas TRA7090, Traxxas Motor Plate (Blue)
TRA7090, Traxxas Motor Plate (Blue) Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit This product was added to our catalog on September 7, 2021
$5.00
Traxxas TRA7151X, Traxxas Assembled Steel CV Driveshaft Set (4)
TRA7151X, Traxxas Assembled Steel CV Driveshaft Set (4) This is a set of optional Traxxas Assembled Steel CV Driveshafts, and are intended for use with the Traxxas 1/16 E-Revo VXL. Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that 1/16 E-Revo VXL can dish out.The U-joint pins are held captive by a heavy duty o-ring so you never have to worry about losing a pin. The nickel plated steel shafts and black oxide treated accents not only look good, they are designed to exacting specifications for ultimate strength and performance. These are simply the most advanced steel CV driveshafts available for the 1/16 E-Revo VXL. This product was added to our catalog on September 7, 2021
$70.00
Traxxas TRA7152, Traxxas Complete Slipper Clutch
TRA7152, Traxxas Complete Slipper Clutch This product was added to our catalog on September 7, 2021
$5.00
Traxxas TRA7153, Traxxas Steel Driveshaft, (Shaft Only): 1/16 E-Revo
TRA7153, Traxxas Steel Driveshaft, (Shaft Only): 1/16 E-Revo This product was added to our catalog on September 7, 2021
$8.00
