CLN3216, CRC CK25 AR Competition 1/12 Pan Car Kit The CRC CK25 AR Competition 1/12 Pan Car Kit is the next level of pan car featuring many points of adjustment for extreme performance. Building off the popular CK25, this chassis allows the user to make easy setup changes for added versatility. These points of adjustments allow the user to make key changes to be competitive on any track.Now, with just a quick adjustment, the user can raise the pivot (for more steering and aggressive "cut") or lower the pivot for a less aggressive chassis feel. The clamping design allows the pivot to be adjusted with no play. Camber and caster can also be easily adjusted with the turn of a hex wrench. Roll center adjustments are just as easy with the use of optional shims. The kit includes both a solid axle and differential making it perfect for high bite carpet or low grip asphalt.NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Adjustable roll center center pivot The steering block allows for Ackermann changes giving the car an aggressive steering response Includes a solid axle with the components needed for a differential The center pivot makes rear roll center adjustments quick and easy Floating servo mount allows the use of most mid to mini size servo Needed to Complete: Radio System (transmitter and receiver) Steering Servo Motor and Pinion Gear Electronics Speed Controller Battery Pack Compatible Charger Wheels, Tires and Inserts 1/12 Pan Car Body Polycarbonate Paint for Body This product was added to our catalog on September 8, 2023

Read more less

LND616M, 1/12 Jolly Roger Duel With Death Diorama

Read more less

This is the Serpent S120 Pro 1/12 Pan Car Kit. This high performance 1/12 scale pan chassis features a host of nicely machined carbon fiber and aluminum parts. After the huge success of the F110 SF4, The step to develop a 1/12th scale car on the same platform was logical. The focus was to make the car easy to work on and durable without sacrificing performance.    NOTE: Painted body, electronics, wheels and tires are shown in photos for reference only. These are not included in the kit and must be purchased separately. See needed to complete list below for a full list of items required to complete the model.  Features: Updated innovative design for the rear pod with side bearings in linear guides replacing the traditional side-links With the redesigned side-bearing set-up, the roll motion is completely linear and independent, thus the cornering is completely independent from accelerating or braking. Lipo longitudinal or Lipo transversal with narrow chassis design Side bearing design opens the possibility to use both inline and cross lipo orientation while keeping a narrow chassis design. Special holders for lipo cross configuration included in the kit, inline configuration is optional in aluminium and brass. Full strength top-deck to prevent longitudinal flex and keep torsional flex on a reasonable level. Lipo can be exchanged in any configuration without removing the body 1-screw Lipo mount in all lipo orientations. Easy to work on and strong front suspension from the F110 SF4 is evolved for the pan-car specific demands. All screws are easily accessible. Servo mount is adjustable to fit every servo on the correct position. Double short tube system for the rear roll damping Updated ultra-low center of gravity rear pod Angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, while keeping all masses low in the pod. Bulkheads are completely redesigned to keep masses as low as possible while still maintaining strength Rear shaft mount is completely new and innovative. Ride height and wheelbase can be adjusted very precise with shims. Rear carbon shaft with variable diameter, reinforced by an aluminium sleeve at the bearing and where the pin connects the aluminium thread insert with the shaft. Improved shocks are easier to build with bigger piston diameter as the Project 4X, and the Project 4X bleeding hole for easy rebound adjustment Specifications:Type & Scale: Electric 1/12 PancarTrackwidth (Front): 168mmTrackwidth (Rear): 169.5mm Wheelbase: 202mmIncludes: S120 Kit 10,000cst Shock Oil 8,000 Diff Fluid  Needed to Complete:  3 Channel Radio System w/High Speed Steering Servo 1/12 Pan Car Tires & Wheels Motor & ESC 4 Cell NiMH, or 1S LiPo Battery & Compatible Charger 1/12 Pan Car Body & Polycarbonate Paint This product was added to our catalog on August 11, 2022

Read more less

TAM12042, Tamiya 1975 Martini Brabham BT44B 1/12 Plastic Model Kit The Tamiya 1/12 1975 Martini Brabham BT44B Plastic Model Kit is a re-release of a classic. Tamiya accurately recreated the monocoque body and distinctive triangular cross section and wedge shaped form. Included with this model are photo etched parts, aluminum air funnels and belt straps to give this model amazing detail. Package includes one model kit. Note: Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly. Hobby tools, adhesive and paint will be needed to complete the model. Features: Movable suspension with realistic coil springs Movable steering wheel Highly-detailed V8 engine with accurately recreated fuel lines and ignition cables Front fairing, cockpit fairing, and induction box can all be detached Faux cloth stickers and photo-etched parts give realistic depictions of seatbelts Includes aluminum air funnels Synthetic rubber tires and drive shaft boots Decals are included to depict Martini and Goodyear logos Markings for car no.7 and no.8 are also included This product was added to our catalog on December 16, 2021

Read more less

TAM12054, Tamiya Tyrrell 003 1971 Monaco GP 1/12 Plastic Model Kit This is the Tamiya Tyrrell 003 1971 Monaco GP 1/12 Plastic Model Kit. The Tyrrell 003 1971 Monaco GP encompasses formula one history with this iconic vehicle. The Tyrrell team made their Formula One debut in 1968 and quickly achieved excellent results, with a drivers' championship for Jackie Stewart the next season. From the 11th race of 1970 in Canada, the team debuted the in-house designed 001, which paved the way for the 003 and 002 cars piloted in 1971 by Stewart and François Cevert respectively. While a unique integrated front wing and nose with radiator just below caught the eye, the 003 utilized an otherwise orthodox, reliable setup. Stewart achieved 6 wins in 11 races including the Monaco GP, more than enough for that season's drivers' and constructors' titles. Now, the car is immortalized in Tamiya 1/12 scale.NOTE: Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly. Hobby tools, adhesive and paint will be needed to complete the model.Features: Realistically captures the T-shaped, flat nose cowling - called "hammer head" - of the 003 which raced in the 1971 Monaco GP, plus the rounded body panels. Steering wheel moves front wheels. Body upper cowling and nose parts can be removed even after assembly. (Includes stand to put these removed parts) Front and rear suspension employs coil springs. Exquisite rendering of DFV engine realistically recreates pipes and wiring. Photo-etched parts are included to depict radiator, wing end plates, seatbelt buckle parts and more. Comes with high-quality Cartograf decals. This product was added to our catalog on March 16, 2021

Read more less

YOKGT1-01AG, Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit w/Steering Gyro Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit with Gyro This is the Yokomo GT1 Rookie Speed (RS) 1/12 Electric Pan Car Kit with type-A body and YG-302 gyro . This beginner friendly GT1 pan car kit is a direct drive chassis designed for reliable performance. The low form of the GT1 allows for quick response and speedy cornering performance. Equipped with a realistic body shape, semi-slick tread radial tires and a relatively simple chassis configuration, it is the perfect package to start racing a pan car. The front suspension settings and wheelbase can be changed to tune the chassis to your driving surface. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model This chassis is only designed for shorty Li-Po batteries   Features: Direct rear 2WD Includes a high performance aerodynamic clear body includes YG-302 steering gyro suitable for many applications Shorty LiPo size battery tray centered in the middle to aid in balancing the chassis weight All-round radial pattern rubber tires included King pin and coil spring front suspension Specifications: Scale: 1/12 Type: Electric Length: 408mm Width: 180mm Height: 95mm Wheel Base: 234mm (239mm selectable) Weight: 920g Includes: (1) Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit (1) YG-302 gyro (1) Type-A body Needed to Complete: (1) 2-Channel Radio/Transmitter & Receiver (1) Steering Servo (1) Electronic Speed Controller (ESC) (1) 540 Motor (1) 1S or 2S Shorty LiPo (1) Compatible Charger Polycarbonate paint for body This product was added to our catalog on March 15, 2023

Read more less