LNL612730, O-27 #314 Girder Bridge
Specifications
DCC
Equipped
Lighted
LED
Wheel Configuration
2-6-0
Sound
Econami
This product was added to our catalog on December 5, 2017
LNL83185, Lionel The Polar Express, Electric O Gauge Model Train Accessories, Elf Figure Pack (683185)
This product was added to our catalog on December 18, 2021
The Digitrax BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet. The BXPA1 is silent, solid state and uses no mechanical relays for auto-reversing.
Automatic reversing for one reversing section or sub-district.
DCC occupancy detection for one auto-reversing section lets you know when equipped rolling stock is in a detection section on your layout.
Integrated transponding zone lets you know the location of transponder-equipped locos or rolling stock.
Intelligent automatic short-circuit and over-current power management, improves reliability by avoiding most booster shutdowns.
Connects to LocoNet to transmit detection section occupancy, transponding and track power information.
Detects most powered locomotives in a detection section.
Detects rolling stock equipped with resistor wheel sets.
Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
Plug and play with Digitrax DCC systems.
LED indication of detection section occupancy, transponding, power status, and reversing section status.
Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
Easy-connect, pluggable track wire terminal blocks can plug-in straight or at right angles.
Operations mode read back allows you to read CV values of decoders equipped with transponders when on track.
Firmware update capability via IPL over LocoNet.
A Ready-to-Run set staple, this reliable and tough steam locomotive is available for the first time individually with the same great performance as the 0-8-0 steam engines in our LionChief ® starter sets. Arriving in four popular road names, these locomotives can be controlled by their LionChief® remote or via your smart device and the Bluetooth™ App.
Electric locomotive controlled by included LionChief remote, LionChief Universal Remote (sold separately) or Bluetooth LionChief app
On/Off switches for smoke and sound
RailSounds RC™ sound system with steam chuffing and background sounds, whistle, bell, and user-activated announcements
Operating headlight
Powerful maintenance-free motor
Operating couplers
PRODUCT SPECIFICATIONS
Rail Line: Southern
Road Number: 7670
Gauge: O Gauge
Power: Electric
Engine Type: Steam
Min Curve: O31
Dimensions: Length: 18"
LNL2032210, O Scale, 0-8-0 LionChief, Great Northern #831
A Ready-to-Run set staple, this reliable and tough steam locomotive is available for the first time individually with the same great performance as the 0-8-0 steam engines in our LionChief ® starter sets. Arriving in four popular road names, these locomotives can be controlled by their LionChief® remote or via your smart device and the Bluetooth™ App.
Electric locomotive controlled by included LionChief remote, LionChief Universal Remote (sold separately) or Bluetooth LionChief app
On/Off switches for smoke and sound
RailSounds RC™ sound system with steam chuffing and background sounds, whistle, bell, and user-activated announcements
Operating headlight
Powerful maintenance-free motor
Operating couplers
PRODUCT SPECIFICATIONS
Rail Line: Great Northern
Road Number: 831
Gauge: O Gauge
Power: Electric
Engine Type: Steam
Min Curve: O31
Dimensions: Length: 18"
This product was added to our catalog on December 18, 2021
A Ready-to-Run set staple, this reliable and tough steam locomotive is available for the first time individually with the same great performance as the 0-8-0 steam engines in our LionChief ® starter sets. Arriving in four popular road names, these locomotives can be controlled by their LionChief® remote or via your smart device and the Bluetooth™ App.
Electric locomotive controlled by included LionChief remote, LionChief Universal Remote (sold separately) or Bluetooth LionChief app
On/Off switches for smoke and sound
RailSounds RC™ sound system with steam chuffing and background sounds, whistle, bell, and user-activated announcements
Operating headlight
Powerful maintenance-free motor
Operating couplers
PRODUCT SPECIFICATIONS
Rail Line: Santa Fe
Road Number: 729
Gauge: O Gauge
Power: Electric
Engine Type: Steam
Min Curve: O31
Dimensions: Length: 18"
ESU is very proud to present to you the new interior LED lighting system for passenger cabins. This system allows you to retrofit your cars with a prototypical and steady interior lighting. The passenger car interior lighting is available in three different versions to match the desired location.The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight.
The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should still be able to switch light effects.
Modes
The LokPilot 5 Fx micro is a multi-protocol decoder. It masters the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus® technology, the de-coders register fully automatically at a suitable digital center.It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom®, it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.Motorola® users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The LokPilot 5 Fx micro DCC speaks "only" the DCC protocol, but can also be automatically registered with RailComPlus® at appropriate control centers.The LokPilot 5 Fx micro decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this decoder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.The LokPilot 5 Fx micro decoder can be used on analog DC and ac current webs; the LokPilot 5 Fx micro DCC on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Functions
The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
Interaction
LokPilot 5 Fx micro are designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 micro decoder and the control car with a LokPilot 5 Fx micro. Provided the same address, both are absolutely identical. The identical arrangement of the CVs facilitates the tuning of the two decoders.
Operational reliability
On request, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC for overbreeding dirty rail sections.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.
The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.
The LokSound 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder and comes without a loudspeaker.
Modes
The LokSound 5 micro DCC Direct is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokSound 5 micro DCC Direct Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.The LokSound 5 micro DCC Direct can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 micro DCC Direct Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output power controls the speakers, which have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.All individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks.
Functions
The LokSound 5 micro DCC Direct has 10 directly soldered LEDs. Two of them are intended for front and rear head lighting, two more are connected to the aux3 and AUX4 outputs to switch e.g. number boards. A further 6 LEDs on the bottom are intended for ditch lights, but can also be used for other lighting purposes on request. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokSound 5 micro DCC Direct has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the hitherto typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Decoder delivers up to 0.9A motor power.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible
The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the analog board installed as standard. Finally, these models can also be easily retrofitted with a LokSound decoder.
The LokSound 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder and comes without a loudspeaker.
Modes
The LokSound 5 micro DCC Direct Kato USA is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully to a suitable digital center.It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokSound 5 micro DCC Direct Kato USA Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.
The LokSound 5 micro DCC Direct Kato USA can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 micro DCC Direct Kato USA Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on its system. There is virtually no difference to the original audible anymore. A Class-D audio output with up to 3W output power controls the speakers, which can have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.
All individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks.
Functions
Despite its compact dimensions, the LokSound 5 micro DCC Direct Kato USA is equipped with an enormen number of function outputs. Two directly soldered SMD LEDs are designed for front and rear front and rear head lighting. For older models, two wired LEDs can alternatively be soldered and switched separately. Three further reinforced function outputs are also available. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokSound 5 micro DCC Direct Kato USA has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Kato USA decoder delivers up to 0.9A motor power.
Operational reliability
A PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail sections.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.
Working with Narrow Hood units in N scale? The NEW 6 output function LokPilot Micro Direct Micro decoder was designed with this purpose in mind!
The LokPilot Micro Direct is a versatile DCC & DC “Dual Mode” decoder integrating a full-featured .75A motor controller. The NEW LokPilot Micro Direct Micro only measures 2.60 inch long x .32 inch wide by only .18 tall (66mm x 8.2mm x 4.5mm) making it the world´s narrowest LokPilot decoder maybe the only such decoder with 6 function outputs on the market!
We ship the LokPilot Micro Direct Micro in a form factor which is made as an upgrade to DC Locos that came from the factory with ESU Sound. This allows flexible installation in your favorite N scale models. Due to its unique thermal design, it (like all genuine LokPilot decoders) does not need any heat sinks.
Operational modes
The LokPilot Micro Direct can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.
Of course, the LokPilot Micro Direct supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokPilot Micro Direct can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.
By the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.
Motor management
ESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokPilot Micro Direct offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!
Regardless if you are using coreless or conventional DC motors, the LokPilot Micro Direct’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.
Analogue operation
The LokPilot Micro Direct decoder can be used for analogue DC locomotives.
Functions
LokPilot Micro Direct Micro decoders have 6 function outputs with the possibility of using constant current of 50mA each. These outputs can be assigned individually. All important light functions like Flashing ditchlights, Gyrolight, Mars light, and so on are provided including an individual adjustment of brightness for each function. Besides D312 Rotary beacon, strobe and alternate flashing, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.
The Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED mode brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs. (Pulse Width Modulation)
RailComPlus®
With RailComPlus® your locos will be recognized automatically by an appropriate digital command station fast as lightning and will receive a new address. Forget about the cumbersome typing and programming!
Safeguard
Of course, all function outputs and the motor connection are overload and short-circuit protected.
Built-in future
LokPilot decoders are firmware updatable. This means you are able to replace the internal decoder software by a newer version, if needed. You only need an ESU LokProgrammer to do so.
LNL12893, PM-1 POWER ADAPTOR CABLE
The Power Adapter Cable connects your transformer to a PowerMaster (6-24130) for operating LEGACY, TMCC and non-TMCC equipped locomotives.
PRODUCT SPECIFICATIONS
Brand: Lionel
Power: Electric
Most Recent Catalog: 2016 Lionel Volume 2 Catalog
Compatible with FasTrack® only
Removable side girders allow placement on top or underneath deck
PRODUCT SPECIFICATIONS
Gauge: O Gauge
Scale Type: Traditional
Power: Electric
Dimensions: Length: 10"
A perfect addition to every layout!
Each bridge superstructure features detailed lattice work inside, exquisite molded-in exterior rivet details and simulated wood decking. Each bridge spans a full 30" in length and can be lifted off the piers to function as a "lift out" for a walk-through aisle in your layout. Each bridge comes with a pair of modular bridge piers.
Modular snap-together pier design allows adjustable height to match FasTrack or tubular track trestles
Compatible with FasTrack , each bridge can be adapted to work with all other track systems using a Transition Track (6-12040 sold separately) at each end
Interior height of the bridge has adequate space to clear scale rolling stock
Easily configured to connect multiple bridges
Mounting tabs on bottom risers to secure piers to your layout
Realistic lattice and rivet detail
PRODUCT SPECIFICATIONS
Gauge: O Gauge
Brand: Lionel
Power: Electric
Dimensions: Single bridge footprint ( including piers ) 39”L x 5 1/2” W / Footprint for 2 bridges 73 1/2” L x 5 1/2” W
LNL681248, O FasTrack Girder Bridge
This product was added to our catalog on December 18, 2021
Compatible with FasTrack only. Removable gliders allow placement on top or underneath platform! Dimensions 10" - can replace 1 FasTrack 10" straight
Compatible with FasTrack only
Metal base
Removable side girders allow placement on top or underneath platform
Replaces one FasTrack 10" straight
PRODUCT SPECIFICATIONS
Gauge: O Gauge
Brand: Lionel
Power: Electric
Dimensions: Length: 10"
