Tools & Maintenance
JConcepts JCO2538-2, JConcepts 1/10 & 1/8 Aluminum Tire Balancer w/Case (Black)
The JConcepts Tire Balancer features an aluminum and steel design that blends nicely into any pit area. The balancer comes set in a storage box for protection and travel convenience. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition. The center point of any balancer are the bearings, the free spinning action rests inside the JConcepts hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminum material, anodized, etched with instructions and chamfered for that extra lustrous look. The base of the item is built to protect, position and maintain a small footprint at all times. The base has 4 stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The JConcepts balancer is pre-assembled and backed by JConcepts customer support and racing team lineage. NOTE: The JConcepts Racing Team uses a modeling clay for balancing material which is readily available through hobby based retailers. Features: JConcepts design, function Aluminum and steel construction Collapsible, lay-down design Center hub assembly with bearings Compatible with 1/10th and 1/8th vehicles Sturdy base with stand-off legs Black anodizing, etched instructions Thumb nut and screw assembly and use Pre-assembled Includes storage box with foam padding This product was added to our catalog on December 16, 2021
$90.00
Tamiya TAM87208, Tamiya Masking Tape (3mm)
TAM87208, Tamiya Masking Tape (3mm) Tamiya Masking Tape is ultra thin, and ideal for use on both plastic and R/C models. PET plastic covers help prevent distortion and allow minimal dust to settle on the tape for superior longevity. The tape is exceedingly useful in any masking situation, but particularly in fine paint jobs or intricate and complex livery designs. Features: 3mm wide Includes one 18-meter roll of masking tape. Tape is made from the same easy-to-use paper material employed in Tamiya popular masking tape Items 87030-87035. It can be easily and neatly cut using scissors or modeling knife. PET plastic covers help prevent distortion and allow minimal dust to settle on the tape for superior longevity. They are stuck to the roll’s plastic core. This product was added to our catalog on April 22, 2021
$4.49
Tamiya TAM81043, Spare Bottle Mini (Square)
TAM81043, Square Bottle Mini (Square) This product was added to our catalog on April 1, 2024
$1.75
Excel EXL55661, Pinvise with Chucks
EXL55661, Pinvise with Chucks This item was added to our catalog March 15, 2024
$12.99
Yokomo YOK-YC-7, Yokomo Plastic Parts & Screws Carrying Case (7.5 x 8.9 x 1.6")
YOK-YC-7, Yokomo Plastic Parts & Screws Carrying Case (7.5 x 8.9 x 1.6") The YC-7 is around a medium size screw box, convenient for screws, parts, shock springs and even hex tools. With 4 rows of compartments and dozens of included partition plates, the YC-7 can be configured in a variety of combinations to accommodate different needs. Specifications: Dimensions: 190x225x40mm (7.5 x 8.9 x 1.6") This product was added to our catalog on September 18, 2021
$18.25
ProTek RC PTK-8282, ProTek RC 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm)
PTK-8282, ProTek RC "TruTorque SL" 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm) This is the ProTek R/C "TruTorque SL" Metric Nut Driver Set. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier. ProTek R/C "TruTorque SL" nut drivers feature updated, "super light" 20mm diameter machined aluminum handles that have been knurled to provide a high leverage, non slip surface that will be comfortable to use during long wrenching sessions. The tool size is etched into the handle for easy identification and a black rubber cap is fitted to the end to increase comfort during use. The precision cut tool steel tips provide an exceptional fit with the fastener, and feature a bronze colored finish that not only looks good, but also helps to protect the steel from corrosion. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. Features: Updated SL super light CNC machined knurled aluminum handles Size is marked on the handle for identification 4-Piece nut driver set Rubber end caps Includes: (1) 5.0mm Metric Nut Driver (1) 5.5mm Metric Nut Driver (1) 7.0mm Metric Nut Driver (1) 8.0mm Metric Nut Driver This product was added to our catalog on December 16, 2021
$50.99 $46.99
Duratrax DTXR0968, DuraTrax TrakPower 3.2mm Chisel Tip for TK950 Soldering Station
DTXR0968, DuraTrax TrakPower 3.2mm Chisel Tip for TK950 Soldering Station This is a replacement TrakPower 3.2mm Chisel Tip for use with the TK950 Soldering Station. Specifications: Length: 49mm (1.9)Tip Width: 3.2mm (0.12) This product was added to our catalog on March 24, 2021
$6.99
JConcepts JCO2889, Analog Quick Reference Calipers
JCO2889, Analog Quick Reference Calipers JConcepts Analog Quick Reference Calipers allow users to reference dimensions quickly. Racers have asked over and over for a small footprint item that is able to measure small spaces accurately and quickly. The quick reference calipers are analog based and capable to be locked into place to secure or save dimensions for later or to copy side-to-side. The all-aluminum built and anodized item, built from 4 pieces, is a very technical and precise piece. The quick reference tool has the ability to measure inside surfaces and outside surfaces depending on which end is chosen for use. A metric graduated scale is laser etched onto the item to allow the user to measure in .5mm increments. A thumbscrew allows the sliding plane to be locked into place for quick comparisons and reference distances. A display window is machined into the upper slide where dimensions are shown up to an overall length of 80mm. A small overall size makes it ideal to place in to RC sized tool and lock boxes used routinely out in the field. Features: JConcepts design and function Highly detailed design, 4-piece construction Graduated scale measuring in .5mm increments to 80mm Lockable sliding plane to save reference dimensions This product was added to our catalog on May 22, 2021
$80.00
Racer's Edge RCE7086, 14mm T-Handle Ratchet Wheel
RCE7086, 14mm T-Handle Ratchet Wheel
$17.99
Xuron Micro-Bending Pliers (575)
Micro-Bending Pliers (575) Unique forming blades shape wire and light gauge strips of brass and aluminum. Ideal for adjusting trip pins on N, HO and O sized couplers. Ergonomically designed and featuring Xuron's Light-Touch™ return spring and non-slip Xuro-Rubber™ handle grips for comfort and control.
$18.95
Xuron Hard Wire & Cable Cutter Tool (2193)
Hard Wire & Cable Cutter Tool (2193) Designed for cutting memory wire and other types of hard wire. Also, a great tool for cutting push rods, throttle cable and carbon fiber rods and nichrome wire. Cutting effort is minimal due to the tools' full by-pass shearing action. Rated for cutting hard wire up to 0.040" diameter.
$22.50
