TAM87038, Tamiya Extra-Thin Cement (40ml)
Liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. This EXTRA THIN formula cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.
Features:
Contains 40ml per bottle.
Average drying time is 5-10 minutes before you can move onto the next step of construction.
Fully cures in 24 hours.
This product was added to our catalog on January 23, 2021
TAM87095, Tamiya Putty (White)
Tamiya Putty has long been praised by modelers for its high quality and ease of use. However, its gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modelers with a white-colored putty to solve this problem. Useful for filling holes and seam lines, this versatile putty can be used on plastic, wood, or metal, and can also be diluted with lacquer thinner for a wide range of applications. Each aluminum tube contains 32 grams of putty.
This item was added to our catalog March 22, 2022
TAM54358, Tamiya RS-540 Torque-Tuned Motor
Tamiya has developed this Torque-Tuned motor, which offers performance that is between that of a standard Type 540 motor and Item 53068 Sport-Tuned Motor. Compared to a standard Type 540 motor, it offers a higher top speed and improved acceleration when used with RC car models with standard gear ratios.
Torque-Tuned Motor: Turns: 25T *Top Speed: 26km/h
This is the Tamiya 25 Turn RS-540 Torque Tuned Brushed Motor. FEATURES: Ideal upgrade for 1/10 scale RTR Tamiya electric vehicles May be used in official Tamiya races INCLUDES: Tamiya 25 Turn RS-540 Torque Tuned Motor with pre-soldered Leads and 3.5mm Male Bullet Connectors SPECS: Can Diameter: 1.4" (35.8mm) Length: 2" (51mm) Shaft Diameter: 0.12" (3mm)
This product was added to our catalog on December 16, 2021
TAM81716, Tamiya XF-16 Flat Aluminum Acrylic Paint (10ml)
This Tamiya 10ml XF-16 Flat Aluminum Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM51589, Tamiya TT-01 Racing Truck On-Road Semi Truck Tires (2)
This is a pack of two replacement Tamiya Racing Semi Truck Tires. These are spares that come with the Team Hahn MAN TGS Semi-Truck.
Features:
Diameter: 70mm (outer), 40mm (inner)
Width: 28mm
High sidewalls give a realistic look, and also provide gentler handling, making them a great choice for less experienced drivers.
Compatible with on road racing truck models on TT-01 Type-E chassis.
Use with Tamiya Racing Truck wheels
This product was added to our catalog on April 17, 2021
TAM51004, Tamiya TT-01 "G Parts" Gear Set
This is a replacement Tamiya TT-01 "G Parts" Gear Set.
This product was added to our catalog on December 16, 2021
KYO70707, Kyosho 550 Class G-Series G14L Brushed Motor
This is the Kyosho 550 Class G-Series G14L Brushed Motor. This motor features a 550 size can and is a 14T motor. Features preinstalled wire leads and bullet connectors for select Kyosho ReadySet vehicles.
This product was added to our catalog on December 16, 2021
TAM81020, Tamiya X-20A Acryl/Poly Thinner (23ml)
This is a Tamiya 23ml Paint Pot of X-20A Acryl/Poly Thinner. Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note: X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (TAM87114) for a smoother brushstroke free finish.
This product was added to our catalog on December 16, 2021
TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck
This is a Tamiya 1/14 Tankpool24 Mercedes Actros 4WD On-Road Semi Truck, an impressive model that recreates the Mercedes Actros as raced by the Tankpool24 team in the 2019 ETRC (European Truck Racing Championship). This specific recreation depicts the truck that carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model.
Features:
1/14 scale R/C model assembly kit
Three-part polycarbonate body with components for body, cab and coupler
Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem
Includes stickers recreating the sponsors and livery
Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models
The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customization potential
TT-01 Type-E chassis Hop-Up Options available
Includes 540-Type Brushed motor
Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Specifications:
Adjustable Gear Ratio: Yes
Bearings: Plastic bushing
Body Material: Polycarbonate
Body Stickers: Included
Chassis Material: ABS Plastic
Chassis Type: TT-01E
Construction Type: Assembly Kit
Differential Type: Gear
Drive Type: 4WD
Electronic Speed Control: Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Motor: Brushed 540 Type
Length: 441mm
Width: 188mm
Wheelbase: 257mm
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V battery & charger
This product was added to our catalog on December 16, 2021
TAM81701, Tamiya X-F1 Flat Black Acrylic Paint (10ml)
This Tamiya 10ml X-F1 Flat Black Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM81703, Acrylic Mini XF3, Flat Yellow (10 ml)
This Tamiya 10ml XF-3 Flat Yellow Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM54741, Tamiya TT-01 Type-E Racing Truck Wheels (Black) (4) w/12mm Hex
Tamiya TT-01 Type-E Racing Truck Wheels are dedicated racing truck wheels designed to fit the TT-01 E racing truck chassis. This set is a black version of the wheels found on the Team Hahn Racing MAN TGS semi-truck.
Features:
Includes two front and two rear wheels
Compatible with on road racing truck models on TT-01 Type-E or TT-02 chassis
Use with on road racing truck tires (TAM51589)
Includes:
(2) Front Wheels
(2) Rear Wheels
This product was added to our catalog on December 16, 2021
TAM58661-60A, Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck Kit
The Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck is a scale recreation of the full size Buggyra Racing Fat Fox truck piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. The realistic 3-piece body is made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
1/14 scale R/C model assembly kit
The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape
Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models
Includes 540-Type Brushed motor
Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Specifications:
Length: 420mm
Width: 187mm
Height: 188mm
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.)
Compatible Battery Charger
This product was added to our catalog on August 25, 2022
TAM81520, Tamiya X-20A Acrylic Paint Thinner (10ml)
This Tamiya 10ml X-20A Acrylic Paint Thinner is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on December 16, 2021
KYO97054-4B, Kyosho Fazer FZ02 4-LED Light Set (Clear)
Fazer FZ02 4-LED Light Set. Package includes factory assembled wire string with four clear 5mm bulbs on a 40mm long wire.
This product was added to our catalog on June 29, 2021
TAM81715, Tamiya XF-15 Flat Flesh Acrylic Paint (10ml)
This Tamiya 10ml XF-15 Flat Flesh Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM87135, Tamiya Mark Fit (Strong) (40ml)
This Tamiya 40ml Strong Mark Fit, a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This “strong” version has a more powerful formula for softening decals compared to the standard version. The Strong version help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. The Bottle cap comes with brush applicator and contains 40ml of solvent.
Note: May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints.
This product was added to our catalog on May 16, 2021
TAM81511, Tamiya X-11 Chrome Silver Acrylic Paint (10ml)
This Tamiya 10ml X-11 Chrome Silver Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
Racer's Edge servo extensions feature a JR-style male plug and FUT-style female plug for a truly universal solution. Precision manufactured with gold-plated pins and robust yet flexible 22-gauge wire.
TAM53665, Tamiya TT-01 Spur Gear Set (55T/58T)
Tamiya TT-01 Spur Gear Set. Package includes one 55 tooth spur, and one 58 tooth spur.
This product was added to our catalog on December 16, 2021
TAM81769, Tamiya XF-69 Flat Nato Black Acrylic Paint (10ml)
This Tamiya 10ml XF-69 Flat Nato Black Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM81771, Tamiya XF-71 Flat Cockpit Green Acrylic Paint (10ml)
This Tamiya 10ml XF-71 Flat Cockpit Green Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM81760, Tamiya XF-60 Flat Dark Yellow Acrylic Paint (10ml)
This Tamiya 10ml XF-60 Flat Dark Yellow Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: TAM81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on December 16, 2021
TAM58642-60A, Tamiya Team Reinert Racing MAN TGS 1/14 4WD On-Road Semi Truck
The Tamiya Team Reinert Racing MAN TGS 4WD On Road Semi Truck is a faithful replica of the Team Reinert trucks racing in the European Truck Racing Championship. Weighing in at a colossal 5,400kg these trucks truly are the heavyweights of motorsport! But size isn't the only thing that's extreme about these incredible machines. The Team Reinert Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed.
This Tamiya radio control replica faithfully captures the giant race truck of the Team Reinert Racing Team. It competed in the 2016 running of the FIA European Truck Racing Championship. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance. This specific kit includes a Hobbywing THW-1060 Brushed ESC for incredible performance.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
4-piece durable and lightweight polycarbonate body.
Details such as engine, turbocharger and frame are faithfully reproduced on the polycarbonate body.
Separately molded ABS plastic parts recreate side mirror, coupler and rear bumper.
Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck from the 2016 FIA season.
Wheels and 70mm diameter radial tires are specifically designed for racing truck models.
Molded parts to make the model compatible with LED lights. (Tamiya LED Light Unit sold separately)
Includes a Hobbywing THW-1060 Brushed ESC
Needed to Complete:
2 channel radio system
Polycarbonate paint for body
7.2V battery & charger
Steering Servo
This product was added to our catalog on December 16, 2021
