Boat Parts & Accessories

72 products


  • OSE-80402, OSE Auto Bailer OSE-80402, OSE Auto Bailer

    OSE OSE-80402, OSE Auto Bailer

    4 in stock

    OSE-80402, OSE Auto Bailer Use this to help get rid of water in you hull. The aluminum bailer has a small plastic ball that moves to allow water to exit your hull while your running your boat, but when your boat is at rest the outside water pressure pushes the ball into a seal that closes the hole.Measures:approx 25mm long x 10mm diameter.

    4 in stock

    $8.99

  • LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket

    Leopard LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket

    2 in stock

    LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket Leopard 4092 brushless motor.40mm Diameter by 92mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance. Motor Specs:Magnets: neodymiumWatts: 2600 with Over 4200 Burst.Poles: 4Motor Shaft: 5mm with flat spotCan Measures: 40mm diameter x 92mm longWeight: 492 GramsMounting screw diameter required: 3mmBearing size: 5mm wide x 16mm od x 5mm idMounting Holes 25mm apart for use with most 540 mounts. Includes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. The Leopard Red anodized aluminum water cooling jacket is designed to allow water to come in direct contact with the motor and flow around it allowing maximum cooling.Installation is a snap!Apply some oil to both your motor housing and o-rings, then slide on the jacket. Water Cooling Jacket Specs:Outside diameter 47mm.Length 50mm Long. This product was added to our catalog on June 1, 2023

    2 in stock

    $149.99

  • SPDR-012-DU-4,  Straight Back D/P Rudder Assembly

    Speedmaster SPDR-012-DU-4, Straight Back D/P Rudder Assembly

    2 in stock

    SPDR-012-DU-4, Straight Back D/P Rudder Assembly

    2 in stock

    $56.99

  • spdrs-009-21dut,  Speedmaster 21 Rudder Assembly w/ Extended Tee Bracket

    Speedmaster spdrs-009-21dut, Speedmaster 21 Rudder Assembly w/ Extended Tee Bracket

    3 in stock

    spdrs-009-21, Speedmaster 21 Rudder Assembly w/ Extended Tee Bracket

    3 in stock

    $59.99

  • SPDT-150, Speedmaster 1.5" x 1.5" Adjustable Metal Trim Tabs (2 Pairs)

    Speedmaster SPDT-150, Speedmaster 1.5" x 1.5" Adjustable Metal Trim Tabs (2 Pairs)

    3 in stock

    SPDT-150, Speedmaster 1.5" x 1.5" Adjustable Metal Trim Tabs (2 Pairs) Speedmaster 1 1/2" x 1 1/2" tabs. These tabs are perfect for dialing in any mono and at the same time saving some weight. CNC cut Aluminum adjusting bracket with stainless trim plate.Same as part number ros-spdt-150 but this package comes with (2) pairs of tabs.These adjustable trim tabs measure approx. 1.5" (38.10mm) wide x 1.5" (38.10mm) Long x .70" (17.80mm) height(2) pairs per pack.

    3 in stock

    $29.95

  • SPDSD-6090, Nitro, for 1/4" (.250") propeller shaft

    Speedmaster SPDSD-6090, Nitro, for 1/4" (.250") propeller shaft

    5 in stock

    SPDSD-6090: Nitro, for 1/4" (.250") propeller shaft. Speedmaster Stinger StrutIt can be quickly adjusted from positive to negative thrust angles. The bushing is cross drilled to hold grease for an extra smooth driveline. It is constructed with high quality aluminum and CNC cut to tight tolerances. This has been often copied by other manufactures but never truly has been duplicated.

    5 in stock

    $47.94

  • SPDSB-010-250F, EXT .250 STRUT BLD F/B

    Speedmaster SPDSB-010-250F, EXT .250 STRUT BLD F/B

    1 in stock

    SPDSB-010-250F, EXT .250 STRUT BLD F/B

    1 in stock

    $17.96

  • SPDSB-014-225, 2 1/4" BEARING BLOCK

    Speedmaster SPDSB-014-225, 2 1/4" BEARING BLOCK

    2 in stock

    SPDSB-014-225, 2 1/4" BEARING BLOCK

    2 in stock

    $13.28

  • LEO-56110, Leopard 56110 Motor

    Speedmaster LEO-56110, Leopard 56110 Motor

    2 in stock

    Leopard 56110 brushless motorSpecial while supplies last, includes water Jacket with Leopard Motor Purchase!56mm Diameter x 110mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.Specs:Magnets: NeodymiumWatts: 5000 with Over 6000 Burst.Poles: 4Motor Shaft: 8mmCan Measures: 56mm diameter x 110mm longMounting screw diameter required: 4mmMounting Holes 30mm apartWeighs: 40.5 ouncesBearing size: 8mm wide x 19mm od x 6mm idIncludes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. OSE Suggests 20,000-35,000 total rpm for boats. We suggest most Fast Electric Boaters should run in the 25,000RPM range for Sport Boating or 30,000RPM Range for racing. These are only guidelines, we suggest if you do not have the knowledge to pick the correct motor, please consult us first or other members of the rc fast electric boating community. Either at a local club or on our OSE Forums.

    2 in stock

    $233.99

  • OCT-X465R, OCTURA PROPELLER

    Speedmaster OCT-X465R, OCTURA PROPELLER

    1 in stock

    Diameter: 2.56"Total Pitch: 1.4x2.56=3.584"Shaft Size: 3/16"Attention! This prop is made for boat that require a clockwise spinning prop!

    1 in stock

    $34.99

  • OCT-x457sb, Octura x457 - Sharpened & Balanced

    Octura OCT-x457sb, Octura x457 - Sharpened & Balanced

    1 in stock

    OCT-x457sb, Octura x457 - Sharpened & Balanced

    1 in stock

    $26.87

  • OCT-x430, Octura x430

    Octura OCT-x430, Octura x430

    4 in stock

    OCT-x430, Octura x430

    4 in stock

    $19.99

  • OCT-x430r, Octura x430r

    Octura OCT-x430r, Octura x430r

    5 in stock

    OCT-x430r, Octura x430r

    5 in stock

    $19.99

  • OCT-x457r, Octura x457r

    Octura OCT-x457r, Octura x457r

    4 in stock

    OCT-x457r, Octura x457r

    4 in stock

    $26.99

  • OCT-x460, Octura x460

    Octura OCT-x460, Octura x460

    1 in stock

    OCT-x460, Octura x460

    1 in stock

    $31.99

  • OCT-x455, Octura x455

    Octura OCT-x455, Octura x455

    3 in stock

    OCT-x455, Octura x455

    3 in stock

    $26.99

  • RCE-1100, Instant Stick Foam Saddle Tape (4')

    RaCersEdge™ RCE-1100, Instant Stick Foam Saddle Tape (4')

    6 in stock

    RCE-1100, Instant Stick Foam Saddle Tape (4')

    6 in stock

    $3.79

  • LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor

    Leopard LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor

    2 in stock

    LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor Leopard 4082 brushless motor.The Leopard has been the standard in High value/High quality at a low cost motor on the market. Leopard has released a new version of the popular 1600kv and 2200kv sizes, called the X2.40mm Diameter by 82mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes end-bells that are assembled with screws for both strength and ease of maintenance.

    2 in stock

    $149.95

  • RCESSHP90, RCE Stainless Steel Hot Pipe Complete, 90 Degrees RCESSHP90, RCE Stainless Steel Hot Pipe Complete, 90 Degrees

    Gizmomotors RCESSHP90, RCE Stainless Steel Hot Pipe Complete, 90 Degrees

    3 in stock

    RCESSHP90, RCE Stainless Steel Hot Pipe Complete Size Variation 90 Degrees Spacers are 2-5/8, 2-3/4, 3-inch, 3-1/4 inch

    3 in stock

    $169.00

  • GMM-238, All In One No Leak Manifold GMM-238, All In One No Leak Manifold

    Gizmomotors GMM-238, All In One No Leak Manifold

    5 in stock

    GMM-238, All In One No Leak Manifold

    5 in stock

    $39.00

  • SPDSD-2140, 3/16" Shaft 3 Bolt Transom Bracket

    Speedmaster SPDSD-2140, 3/16" Shaft 3 Bolt Transom Bracket

    3 in stock

    3/16" Shaft 3 Bolt Transom Bracket

    3 in stock

    $39.95

  • SPDMR-580, Speedmaster Motor Mount Cushion – 5/8 in.

    Speedmaster SPDMR-580, Speedmaster Motor Mount Cushion – 5/8 in.

    9 in stock

    SPDMR-580, 5/8" Motor Mount Cushion (4 required)

    9 in stock

    $2.30

  • DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR

    Dynamite DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR

    1 in stock

    DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR Product Specifications Auto Cutoff Yes Battery Input Lead 12 AWG BEC Yes BEC Continous Current 5A BEC Maximum Burst Current 10A BEC Type Switching BEC Voltage 6V Brakes Yes Connector Type EC5 Forward Yes Input Voltage 2-6S LiPo, 6-18 Cells NiMH Low-Voltage Cutoff Programmable Yes Maximum Burst Current 720A Output Connector 5.5mm Bullet Overload Protection Yes Part Type Electronics Resistance .0005 ohms Reverse Yes Speed Control Marine Brushless Time Delay Brake Yes This product was added to our catalog on 03/04/2021

    1 in stock

    $159.99

  • DYNM3865, 60A BL Marine ESC 2-3S

    Dynamite DYNM3865, 60A BL Marine ESC 2-3S

    1 in stock

    DYNM3865, 60A BL Marine ESC 2-3S Key Features Built in switch allows for easy change of battery chemistry type 14awg wires Large 4mm bullet brushless motor connectors Pre-wired with high-current EC3 connectors 60A single (not dual) battery configuration Overview Dynamite, known for it’s performance oriented, value priced aftermarket RC parts, accessories and electronics introduces its lineup of marine electronic speed controls designed specifically high performance marine applications. OEM for most Pro Boat models, Dynamite’s lineup of marine ESC’s offer users with speed controls engineered to meet the performance demands of today’s high speed RC powerboats. Available in varius configurations, each speed control comes built for complete water cooling and were designed to easily handle the power delivered from today’s high output Li-Po batteries. In addition, each ESC comes pre-wired with a NiMH/Li-Po switch providing an easy method of selecting NiMH or Li-Po battery types. Additional programming is easily managed through the optional LED program card. Product Specifications Specs Auto Cutoff Yes Battery Input Lead 3.25" BEC Yes BEC Continous Current 2A BEC Type Linear BEC Voltage 6V Brakes Yes Connector Type EC3 Forward Yes Input Voltage 2S?3S (7.4V?11.1V) Li-Po; 6C?9C (7.2V?10.8V) Ni-MH/Ni-Cd Low-Voltage Cutoff Programmable Yes Maximum Burst Current 360A Maximum Continuous Current 60A Motor Type Brushless Overload Protection Yes Part Type Electronics Product Height 1 in (25.6mm) Product Length 2.4 in (60.5mm) Product Weight 3.3 oz.(93 g) Product Width 1.5 in (38.5mm) Reverse Yes

    1 in stock

    $94.99

You have seen 72 out of 72 products

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account