Key Features
Track: Location, speed, altitude and much more
Compatible with RC planes, helis, cars, trucks and boats
Compact, Lightweight size allows for an easy fit in most RC application
Built-in high-capacity LiPo Battery - 4 hours continuous tracking pending conditions
USB cable included for charging
PC Interface for mapping on Google map products
Record and download GPS map data (See Support for GPS Logger download)
Can be used in real-world application worldwide
Reads speeds up to 560 MPH (900 KPH)
Switch between Metric and Imperial units using PC software
Overview
Dynamite's GPS Speed Meter and Tracker provides car/truck, boating and air enthusiasts with a compact, portable and easy to use GPS device for tracking everything from top speed reached to locations of their model. The unit's compact size and ultra light weight allows for it to be utilized in various applications including everything from large scale aircraft to 1/10th or smaller radio control cars/trucks/boats.Thanks to the units built-in WASS/EGNOS/MSAS/RTCM (Global Positioning compatibility by country or region), the unit can be used anywhere in the world. The unit uses 10Hz refresh rate providing extremely fast response to changes in the models position while the units low power consumption provides the user with up to 4 hours of uninterrupted tracking time.The unit's LCD screen provides real-time data feedback and it's waterproof design allows for use in virtually all weather conditions. You can also use the Dynamite GPS Logger* software to map your drive, flight, jog, swim, etc. using Google mapping products.The LCD screen will display average, current, and peak speed. As well as current and max altitude, total distance, and GPS coordinates.
Specs
Concurrent reception: GPS and GLONASS
Receiver: L1, 1575.42 MHZ
Satellite Signal Reception Sensitivity: -167 dBm
Update Frequency: 1 – 10Hz
Antenna Type: Built-in
Dimensions (LxWxH): 65mm x 40mm x 20mm (2.6 in x 1.6 in x 0.8 in)
Weight: 45 g (1.58 oz)
Operating Temperature: 0°C to +40°C
Storage Temperature: -10°C to +70°C
Operating Humidity: 5% to 90%
Built-in Flash Memory: 1MB
Built-in Battery: 200 mAh LiPo
Operating time: up to 150 minutes
Recording Time at 1Hz: up to 18 hours - default setting
Recording Time at 10Hz: up to 2 hours
Included Items: USB Cable, Speed Meter
Product Specifications
Accessory Type
Meters & Checkers
Battery Type
Internal High-Capacity LiPo
Connector Type
Micro USB
Input Voltage
5V (to charge internal battery)
Material
Plastic
Product Height
0.79 in (20mm)
Product Length
2.5 in (64mm)
Product Weight
1.4 oz (41 g)
Product Width
1.4 in (37mm)
HRZ00007, Horizon 13g Waterproof Metal Gear Servo
This is a replacement Pro Boat 13g Waterproof Metal Gear Servo, intended for use with the 17" Deep-V Power Boat Racer.
This product was added to our catalog on March 24, 2021
EFLP09060, E-flite 9x6 P-51 Brushless Sportsman S+ Propeller (E-flite Carbon Cub S 2)
E-flite Carbon Cub S 2
This product was added to our catalog on April 15, 2021
Traxxas X-Maxx Sealed Bearing set
(7) 5x11x4
(2) 6x13x5
(3) 10x15x4
(1) 12x18x4
(8) 15x24x5
(4) 17x26x5
(4) 20x27x4
You are purchasing the bearings listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
Part #: TFE4324
TFE4324, FastEddy Traxxas X-Maxx Bearing Kit
This product was added to our catalog on December 16, 2021
EFLB5001S25, E-flite 1S 25C LiPo Battery Pack (3.7V/500mAh) w/JST Connector
This is a replacement E-flite 1S - 3.7V, 25C, 500mAh LiPo Battery Pack.
Specifications:
Type: LiPo
Capacity: 500mAh
Voltage: 3.7V
Weight: 0.51 oz (14.5 g)
Configuration: 1S
Length: 2.35 in (59.5mm)
Width: 0.75 in (19.0mm)
Height: 0.30 in (7.5mm)
Maximum Continuous Discharge: 25C
Maximum Continuous Current: 12.5A
This product was added to our catalog on December 20, 2021
SPMXCA315, Spektrum RC IC3 Battery Adapter w/4mm Male Bullets & 6" 13 AWG Wire
Spektrum IC3 Battery Adapter. This adapter features 4mm Male Bullets and 6" 13 AWG wire.
This product was added to our catalog on July 16, 2021
SPMXCA302, Spektrum RC IC3 Battery Connector (2) (Female)
Spektrum IC3 Battery Connector Set, including two Female IC3 connectors.
This product was added to our catalog on December 31, 2021
PBTPBB22A50C3S, Pit Bull Tires Pure Gold 3S 50C Softcase LiPo Battery (11.1V/2200mAh) w/Battery Life Indicator & XT60 Connector
The Pit Bull RC Pure Gold 3S 50C Softcase LiPo Battery with Battery Life Indicator has been made for extreme performance in any RC from a scale truck to bashing. Pure Gold batteries are built to take abuse, while a built in LED indicator has been placed on the front of each battery to allow easy power status updates! This battery uses an XT60 connector and includes a T-style adapter to allow compatibility with multiple applications.
Features:
Battery Life Indicator allows fast identification of battery power status
XT60 battery connector
T-style battery adapter included
NOTE:
It is not recommended that the adapter is used for charging purposes. This adapter should be used as an ESC adapter only.
The battery should always be balance charged when preparing for use and storage charged before storing.
Specifications:
Capacity: 2200mAh
Voltage: 11.1V (3S)
This product was added to our catalog on July 26, 2021
DYNC1063, Dynamite 2S USB LiPo Charger
Dynamite 2S USB LiPo Charger. This replacement charger is intended for the Axial SCX24 and the Losi Mini JRX2. Package includes one USB charger.
This product was added to our catalog on June 15, 2022
SPMSR6110AT, Spektrum RC SR6110AT 6-Channel DSMR AVC Telemetry Surface Receiver
Spektrum SR6110AT 6-Channel DSMR AVC Telemetry Surface Receiver. This surface receiver is intended for use with all Spektrum DSMR and DSM2 Surface transmitters. Package includes one surface receiver.
Features:
Full-range telemetry capabilities with Spektrum Firma Smart ESC
Steering priority puts the driver in complete control
Uniquely designed AVC technology for Stunts driving and Bashing
Extra-long antenna suited for low to the ground vehicles and marine applications
Water-resistant "Realkote" coating protects electronics from dust, debris and moisture
Voltage sensor data port, voltage sensor included
Works with any RC car, truck or marine models
Compatible with all DSMR and DSM2 Surface transmitters
This product was added to our catalog on August 19, 2021
DYNB6223, 7.4V 600mAh 2S 20C LiPo EC3
Product Specifications
Battery Capacity
300-999mAh
Battery Type
LiPo (3.7V per cell)
Battery Voltage
7.4V
Connector Type
EC3
Part Type
Electronics
Arrma Infraction 6S BLX Sealed Bearing Kit
This is a Team FastEddy Arrma Limitless 6S BLX Sealed Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(10) 8x16x5
(2) 8x19x6
(4) 15x21x4
(2) 5x11x4
(4) 6x10x3
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us
This item was added to our catalog June 2, 2022
TFE2190, FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit
Team FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(6) 5x11x4
(5) 10X15x4
(4) 6X12x4
(4) 5X8x2.5
(2) 12X18x4
(2) 8X16x5
(2) 5X10x4
This product was added to our catalog on December 16, 2021
TFE1168, Traxxas Rustler Sealed Bearing Kit
This is the FastEddy Sealed Bearing Kit for the Traxxas Rustler. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(15) 5x11x4
(4) 5x8x2.5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on December 16, 2021
TFE1165, FastEddy Traxxas Slash 4X4 Ultimate Bearing Kit
Team FastEddy Traxxas Slash 4X4 Ultimate Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(5) 10x15x4
(1) 12x18x4
(7) 5x11x4
(4) 5x8x2.5
(2) 6x12x4
(2) 8x16x5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on June 29, 2021
The next-generation Spektrum™ NX8 offers a powerful combination of features and programmability available from no other 8-channel radio — including Wi-Fi connectivity; a large, 3.2” backlit color display; and built-in Smart Technology support.
FUT01004361-3, Futaba 4YF 2.4GHz FHSS 4 Channel Radio System (Airplane) w/R2004GF Receiver
This is the Futaba 4YF 2.4GHz FHSS 4-Channel Airplane Radio System, with an included R2004GF 4-Channel Receiver. Futaba quality, FHSS technology and an economical price make the 4YF 2.4GHz FHSS radio an excellent choice for cost-conscious modelers wanting an interference-free spread spectrum system for sport flying. The 4YF has always been a great value, and now Futaba has enhanced it with cutting-edge 2.4GHz performance and security!
2.4GHz FHSS TechnologyFrequency-hopping 2.4GHz FHSS technology results in a radio system that's as cutting-edge as it is easy to use!
R2004GF ReceiverThe R2004GF receiver is compatible only with electronics created specifically for 2.4GHz FHSS systems.
Features:
Frequency Hopping Spread Spectrum (FHSS) eliminates signal interference and frequency pins
The included R2004GF receiver features a flexible coaxial antenna that can be easily positioned inside the model for optimum reception
Easy, convenient push-button transmitter/receiver linking, with no binding plugs
Power Down Mode - reduces RF power for 90 seconds, simplifying ground checks for interference
All-channel servo reversing for more installation options
Power and servo reversing switches located out of the way to prevent accidental changes
Battery meter with green and red LED for instant "go/no-go" status
4YF Transmitter Specifications:
Band: 2.4GHz
Operating System: 2-stick, 4-channel
Power Supply: 6V (4 "AA" batteries)
Current Drain: 90mA
R2004GF Receiver Specifications:
Band: 2.4GHz
Power Requirements: 4.8V or 6V (shared with servo)
Current Drain: 30mA (at no signal)
Size: 1.54x1.02x0.39 inches (39x26x10mm)
Weight: 0.49oz (14g)
This product was added to our catalog on October 17, 2023
Prop Adapter (Long): Ultra Micro Carbon Cub SS
This is an optional E-flite Long Prop Adapter, and is intended for use with the E-flite UMX Carbon Cub SS electric airplane. This package includes mounting hardware.
This item was added to our catalog March 2, 2023
SPMXMXA1, Spektrum RC Promoto-MX Stator/ESC Assembly
Losi Promoto-MX Stator and ESC Assembly. This is a replacement stator and ESC for the Losi Promoto-MX Flywheel unit. Package includes one stator and ESC assembly.
This product was added to our catalog on July 10, 2023.
DYNB0110, Dynamite Jet Jam Pool Racer 2S Li-Ion Battery (7.4V/1500mAh)
This is a replacement Dynamite 7.4V 1500mAh Jet Jam Pool Racer 2S Li-Ion Battery, intended for use with the Jet Jam Pool Racer.
Specifications:
Approximate Assembly Time: No assembly required
Beam: 4.5 in (114.3mm)
Boat Type: Deep-V
Completion Level: Ready-To-Run
Drive System: Jet Drive
Hull Height: 3 in (76.2mm)
Hull Material: Injection Molded ABS
Length: 12 in (304.8mm)
Motor Size: 390 Brushed
Radio: Pro Boat 2.4GHz
Recommended Battery: 1500mAh 7.4 LiIon
Scale: 12 inch
Speed Control: 2 in 1 Brushed ESC/RX
Steering: Jet Drive
Trim Scheme Colors: Orange with 3 Decal Options
Type: RTR Deep V Jet Boat
Weight: 1 lb (0.5kg)
This product was added to our catalog on July 30, 2021
PBTPBB43A80C3S, Pit Bull Tires Pure Gold 3S 80C Softcase Shorty LiPo Battery (11.4V/4300mAh) w/Battery Life Indicator & XT60 Connector
The Pit Bull RC Pure Gold 3S 80C Softcase Shorty LiPo Battery with Battery Life Indicator has been made for extreme performance in any RC from a scale truck to bashing. Pure Gold batteries are built to take abuse, while a built in LED indicator has been placed on the front of each battery to allow easy power status updates! This battery uses an XT60 connector and includes a T-style adapter to allow compatibility with multiple applications.
Features:
Battery Life Indicator allows fast identification of battery power status
XT60 battery connector
T-style battery adapter included
NOTE:
It is not recommended that the adapter is used for charging purposes. This adapter should be used as an ESC adapter only.
The battery should always be balance charged when preparing for use and storage charged before storing.
Specifications:
Capacity: 4300mAhVoltage: 11.4V (3S)
Voltage: 11.4V (3S)
This product was added to our catalog on July 26, 2021
7PXR US Limited Edition Transmitter – Super Response Digital Proportional RC System
For Use with Surface Models (01004407-3) (01004406-3)
FEATURES
FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.)
UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication.
INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions.
BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently.
GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR.
TANK MIXING:This function is intended for vehicles such as tanks.
CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software.
MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.
THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating.
DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set.
WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.
TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type.
TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided.
LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed.
VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen.
CONTENTS
YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS:
-T7PXR Transmitter
-R334SBS OR R334SBS-E Receiver
-Dry Battery Holder
-Wheel Offset Adapter
-Wheel Adapter 32deg
-Large Diameter Steering Wheel (54 mm)
-Trigger Brake Lever (Narrow Type)
-Miniature Screwdriver
-Screen Protector
-3 x Receiver Plugs
TRANSMITTER SPECS
WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM
TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2
POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V)
CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on)
TRANSMITTING ANTENNA:1/2λ dipole
4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.
RECEIVER SPECS
R334SBS
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.5 g0.26 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
R334SBS-E
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.2 g0.25 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo
High Performance Servo with Brushless Motor (01102321-3)
FEATURES:– Suitable for RC cars 1/10 scale on/off road and drifting.– Programmable/HV Brushless Servo.– Custom New high power Brushless Motor.– Supports SR mode with T7PX.– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Upper/middle/bottom: Aluminum Case
Speed：0.07sec/60°(7.4V) ／ 0.08sec/60°(6.0V)
Torque：30.0kgf・cm(7.4V) ／ 23.0kgf・cm(6.0V)
Dimensions/Weight：40.5×21.0×26.2mm/54g
RATED VOLTAGE:DC 6.0V-7.4V
OPERATING VOLTAGE:DC 4.8-8.4V
ONLY FOR RC CARS SMALLER THAN 1/5 SCALE
7PXR Transmitter – Super Response Digital Proportional RC System
For Use with Surface Models (01004395-3) (01004396-3)
FEATURES
FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.)
UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication.
INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions.
BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently.
GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR.
TANK MIXING:This function is intended for vehicles such as tanks.
CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software.
MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.
THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating.
DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set.
WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.
TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type.
TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided.
LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed.
VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen.
CONTENTS
YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS:
-T7PXR Transmitter
-R334SBS OR R334SBS-E Receiver
-Dry Battery Holder
-Wheel Offset Adapter
-Wheel Adapter 32deg
-Large Diameter Steering Wheel (54 mm)
-Trigger Brake Lever (Narrow Type)
-Miniature Screwdriver
-Screen Protector
-3 x Receiver Plugs
TRANSMITTER SPECS
WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM
TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2
POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V)
CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on)
TRANSMITTING ANTENNA:1/2λ dipole
4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.
RECEIVER SPECS
R334SBS
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.5 g0.26 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
R334SBS-E
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.2 g0.25 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
EFLB2802S30, E-flite 2S LiPo Battery 30C (7.4V/280mAh) w/UMX Connector
E-flite 2S, 280mAh, 30C Li-Poly Battery Pack. This battery is compatible with a variety of E-flite UMX 2S applications and is a great high power upgrade.
Specifications:
Type: LiPo
Capacity: 280mAh
Voltage: 7.4V
Number of Cells: 2
Weight: 0.6 oz (16.9g)
Configuration: 2S1P
Length: 1.5 in (39mm)
Width: 0.8 in (20mm)
Height: 0.5 in (13mm)
Application: UMX 2S Airplanes
Maximum Continuous Discharge : 30C
Maximum Continuous Current : 8.4A
Charge Protection Circuitry: No
Is Assembly Required: No
This product was added to our catalog on December 30, 2021
EFLA700UM, E-flite Charger Plug Adapter (Discontinued)
This is an optional E-flite Charger Plug Adapter. This charge adapter allows a convenient solution to charging the small E-flight 2S LiPo batteries that are included stock in many E-flight Ultra-Micro airplane kits. The universal banana plugs and balance port ensure compatibility with most conventional LiPo battery chargers.
This product was added to our catalog on June 18, 2021
SPMWS2000, WS2000 Wireless Simulator USB Dongle
Features
Eliminates cables
Small size
No complex programming
Works with most simulator/games that can accept a normal joystick input from USB
Supports up to 8 channels
Overview
Wirelessly connect your Spektrum DSMX / DSM2 radio to your computer, Android tablet or Android mobile device and play games or use with compatible R/C simulators *. No additional hardware or software is required. Simply plug the dongle into the USB port of your computer, or micro USB port of your Android tablet or mobile device and you are ready to go.
PC, MAC, and Android Compatible
Enables any DSMX or DSM2 transmitter * to connect wirelessly as a USB game controller.
No additional drivers required, uses generic drivers already available on most operating systems
Works with most games and simulators that are compatible with USB game controllers. Such as…
RealFlight (8.0 and above)
DRL (Drone Racing League) Simulator
LiftOff FPV Simulator
HotProps FPV Simulator
Android – Absolute RC Plane Sim
Android – FPV FreeRider
* Not compatible with the DM9 Module, DX7 Gen 1, or the DSM2 version of the DX5e
Needed to Complete
PC, Mac, or Android mobile device
Spektrum DSMX/DSM2 transmitter
Compatible R/C simulator software
What's in the Box?
(1) Spektrum Wireless Simulator Dongle
(1) Product Manual
Installation
Press and hold the bind button while inserting the dongle into the USB port. The orange LED will flash repeatedly, indicating the dongle is in bind mode.
Follow the transmitter instructions to put the transmitter into bind mode.
The dongle LED will glow solid orange when the binding process is complete.
The transmitter is now ready to use in the simulator.
Product Specifications
Application
Compatibility: PC, Mac, Android, DSMX and DSM2 Spektrum Transmitter
Input Voltage
Maximum 5V
Product Height
0.50" (12.6mm)
Product Length
2.2" (55.3mm)
Product Weight
0.28oz (8g)
Product Width
0.81" (20.5mm)
SPMX50002S100HT, 7.4V 5000mAh 2S 100C Smart Race Shorty Hardcase LiPo Battery: Tubes, 5mm
Features
Save time and hassle, while improving battery life
Smart discharge allows batteries to automatically discharge to a safe voltage
Gold plated heavy-duty tubes
Integrated microchip stores unique battery parameters and data
Smart Battery is ROAR Approved
Stylish Spektrum orange carbon fiber look
Impact resistant ABS plastic hardcase
Smart chip reader and balance wire on one connector
Powerful 100C continuous discharge rating to deliver maximum performance and longevity
5mm tube positive and negative leads installed on each battery
Several capacity levels to choose from for your driving preferences
Overview
Key Features
Integrated microchip stores unique battery parameters and data.
Smart discharge allows batteries to automatically discharge to a safe voltage.
Save time and hassle, while improving battery life.
Powerful 100C continuous discharge rating to deliver maximum performance and longevity.
Stylish Spektrum orange carbon fiber look.
Impact resistant ABS plastic hardcase.
5mm tube positive and negative leads installed on each battery.
Gold plated heavy-duty tubes.
Smart chip reader and balance wire on one connector.
Several capacity levels to choose from for your driving preferences.
Smart Battery is ROAR Approved
Feature Overview
You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger “Start” button. Smart technology takes care of the rest.
Our Spektrum Smart 100C Lipos come in a variety of popular sizes and are ready to drop into your RC racing buggy or truggy for maximum performance, power, and reliability. These are the perfect packs for drivers that need to get every last electron of performance out of their setup. Faster punches, less resistance to quick current load changes, and superior performance will satisfy pro class drivers.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Video Overview
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the “start” button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3™ and IC5™ output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the “start” button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press “Start.”
IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there’s no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart™ technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
