Recently viewed products
$89.99
DragRace Concepts DRC-10021, DragRace Concepts Drag Pak Rear A-Arms (2)
$12.00
$34.99
$8.99
Pro-Line Parts & Accessories
Pro-Line PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)
PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires. These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere. Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Team Associated MGT Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx Features: Tire: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 5.85" (149mm) Width: 2.72" (69mm) Includes: (2) Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 14, 2021
$59.99
Pro-Line PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)
PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Features: Molded-in High-Performance Herringbone Weave Pattern Belt Reaction HP Tire Will Not Balloon or Expand During Use Specifically Made for No-prep Drag Racing Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires (2) Soft Foam Inserts This product was added to our catalog on November 21, 2021
$38.99
Pro-Line PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels
PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels This is a pair of Pro-Line Trencher Belted 2.8" M2 Compound Tires, Pre-Mounted on Raid Rear Wheels. Pro-Line is proud to introduce the History making Trencher HP 2.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 2.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Just like the original Trencher 2.8" tire, the next generation Trencher HP 2.8" is destined to become the ultimate, go-to Bash tire for your truck! The Belted Trencher HP 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) or go for Aluminum hex adapters for extreme bashing fun! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Trencher HP 2.8" Belted tires now! PLEASE NOTE: The Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 5,000 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under manufacturer warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires. Features: Tires: Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 2.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common 12mm Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 4.87" (123.7mm) Width: 2.86" (72.64mm) What's Included: (2) Pre-mounted Trencher HP 2.8" Belted Tires on Raid Black 6x30 Removable Hex Wheels (2 of each) 6x30 to 12mm Hex Adapters (Narrow & Wide) (12) M3 x 12mm long SHCS hardware Fits: Stampede 2wd Stampede 4x4 Rustler 2wd Rustler 4x4 JATO Rear This product was added to our catalog on May 7, 2021
$59.99
Pro-Line PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4)
PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4) This is a replacement Pro-Line Body Mount Thumbwasher Kit, and is intended for use with the Traxxas Slash, Slash 4x4 and Team Associated SC10 equipped with the optional Pro-Line Extended Body Mount Set. Includes: (4) Thumb Washers (4) Set screws (4) O-Rings This product was added to our catalog on October 25, 2021
$9.99
Pro-Line PRO608700, Extended Front and Rear Body Mounts:SLH 4x4
PRO608700, Extended Front and Rear Body Mounts:SLH 4x4 This item was added to our catalog March 3, 2021
$17.99
Pro-Line PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue)
PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue) Pro-Line X-Maxx 1/5 Aluminum Adapter Washer. These optional wheel adapters are great for fitting 1/5 sized wheels to the Traxxas X-Maxx axles. Using these will expand the wheel and tire selection you have for your X-Maxx. Package includes four wheel adapters. Features: Machined Aluminum for a Factory Look Blue Anodized Increase your X-MAXX Wheel Selection Options Allows other 1/5 wheels to fit on X-MAXX Specifications: Application: X-MAXX Vehicle Type: Monster Truck Color: Blue Material: Aluminum Accessory Type: Wheel Adapter Scale: 1/5 Inner Diameter: 18mm to 12mm This product was added to our catalog on May 6, 2021
$12.99
Pro-Line PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2)
PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2) The Pro-Line 8x32 to 17mm 1/2" Offset Aluminum Hex Adapters are intended for use with Pro-Lines 8x32 3.8" removeable hex wheels and are made from High-strength, Durable DuPont Black Nylon Material. Features: Replace your 8x32 3.8" 17mm Hexes Built to Take a Beating Made from High-strength, Durable DuPont Nylon Material Includes 4 Hexes Per Set Made in the USA, since 1982 Includes: (4) 8x32 to 17mm 1/2" Offset Hex Adapters This product was added to our catalog on August 8, 2021
$9.99
Pro-Line PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3)
PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3) Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tires feature the iconic hook shaped pins found on the 1/10 size tires. This will provide you with the steering you need while not being too grabby. These front tires are Pre-Mounted to lightweight and durable narrow front carpet racing wheels for the Losi Mini-B chassis. Just like Pro-Line's other Velocity wheels, they feature the latest in style and performance with a reversed dish design that protects the nut and axle from damage during collisions. Package includes two pre-mounted tires. Features Iconic Hook Shaped Pins Provide the Steering you Need on Carpet Made from a Special Carpet Racing Compound Tires Conveniently Pre-Mounted to Mini-B Yellow Front Wheels Specifications: Scale: 1/16 Wheel Hex Size: 8mm Product Height: 2.32" (59 mm) Product Width: 0.78" (20 mm) Accessory Type: Wheels Vehicle Type: Buggy Wheel Position: Front Tire Tread: Wedge Compound/Hardness: Medium Front or Rear: Front Package Type: Pre-Mounted This product was added to our catalog on October 6, 2021
$24.99
Pro-Line PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3)
PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3) Pro-Line Hoosier Drag 2.2" Front Tires were specifically made for no-prep RC Drag racing! The Hoosier Drag Front tires not only look amazingly Scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound and fit 2.2" 2wd Buggy Front Wheels. The Hoosier Drag Front tire and every other tire that Pro-Line makes is proudly Made in the USA. Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier Drag Slick Rear Tires to Complete the Look Available in Soft S3 Compound or the More Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with 2WD Front Buggy Wheels Made in the USA, since 1982 Specifications: Height: 3.18" (81mm) Width: 1.05" (27mm) Includes: (2) Hoosier Drag Front 2.2" Tires (2) Closed Cell Foam Inserts This product was added to our catalog on May 3, 2021
$25.00
Pro-Line PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels
PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2) Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels Fits: Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Tekno RC MT410 Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx This product was added to our catalog on March 4, 2021
$74.99
Pro-Line PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex
PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels with 12mm & 14mm Removable Hex. This pair of short course wheels feature the use of Pro-Line 6x30 removable hex and a secure 6-bolt bead-loc ring. Included with these wheels are hex options with varying offsets: 12mm Traxxas Slash Front, Slash Rear/4x4 Front or Rear, Pro-Trac (0-offset) and 14mm for Arrma vehicles. Using the 6x30, these wheels are also compatible with the optional aluminum 6x30 hexes, creating even more offset and hex size options. Features: One-sided Bead-Loc captures Both Sides of the Tire Evenly with No Glue Necessary Removable Hexes for Quick Wheel Offset Changes Raid 10-spoke Wheel Design Mimics Full-size Offroad Wheels Includes Slash Front, Slash 2wd Rear/4x4, Pro-Trac (0 Offset), and 14mm Hexes Easily Replace Damaged Hexes Specifications: Scale: 1/10 Inner Tire / Outer Wheel Diameter: 2.2/3.0 in Vehicle Type: Short Course Truck Wheel Type: Raid Wheel Hex Size: 12mm or 14mm Color: Red Includes: (2) Raid 2.2/3.0" 6x30 Removable Hex SC Wheels (2) Bead-Loc Sleeves (2) Die Cast Bead-Loc Rings (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 14mm Hex Adapters (24) M3 x 12mm BHCS hardware This product was added to our catalog on March 22, 2022
$37.49
Pro-Line PRO633500, 6x30 to 12mm Hex Adapters (Nrw&Wde) for 6x30 Whls
PRO633500, 6x30 to 12mm Hex Adapters (Nrw&Wde) for 6x30 Whls This item was added to our catalog March 3, 2022
$11.99
Pro-Line PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black)
PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black) This is a pack of two Pro-Line Sling Shot Tires, Pre-Mounted on Black Desperado Wheels. The Sling Shot provides hours of fun in the sand, snow or even in the occasional mud pit. The 12 paddle design ensures maximum performance due to the true scoop design coupled with low roll outer sidewalls. Plus, Pro-Line makes using high performance, long lasting fun tires easier than ever by offering the Sling Shot tires pre-mounted to the Desperado wheels! The wheel features a wider offset, that will make your truck more stable and handle bumps and jumps like a champion. Pro-Line’s 6-spoke Desperado wheel will make your truck the toughest looking one on the block. The wheel is a one-piece wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This is a 12mm hex wheel and it will make your truck stand out from the rest! Features: Ready to Sling Sand and Snow Scale 12-Paddle tread design for Awesome Looks and Performance Tires also available unmounted Lightweight 1-piece wheel Wide offset wheel that improves stability and performance Awesome scale look Wheel also available unmounted Made in the USA, since 1982 Specifications: Height: 3.85" (98mm) Width: 1.68" (43mm) Includes: (2) Sling Shot 2.2” Paddle Tires mounted on Desperado Wheels This product was added to our catalog on March 18, 2021
$31.99
Pro-Line PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)
PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires were developed specifically for no-prep RC Drag racing! These Hoosier Drag Slick tires not only look amazingly scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound. The Hoosier Drag Slick tire and every other tire that Pro-Line makes is proudly Made in the USA. Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier 2.2" Drag Front Tires to Complete the Look Available in Soft S3 Compound or the more Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Hoosier Drag Slick SC 2.2"/3.0" Tires (2) Closed Cell Foam Inserts This product was added to our catalog on May 13, 2019
$30.99
Pro-Line PRO635400, 1/10 6x30 to 12mm SC Hex Adapters
PRO635400, 1/10 6x30 to 12mm SC Hex Adapters Product Details Do you need replacement plastic 6x30 to 12mm Slash® SC Hex Adapters for your Pro-Line 6x30 Removable Hex SC Wheels? You came to the right place! This pack contains a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd and AE DR10 Rear) hexes and a pair of 12mm Slash® 2wd Front hexes for your 6x30 wheels. These hexes are made from High-strength, Durable DuPont Black Nylon Material and are built to take a beating. Key Features Fits any of Pro-Line's 6x30 Removable Hex Wheels Made from High-strength, Durable DuPont Nylon Material Replacement 12mm Slash® SC Hex Adapters In The Box (2) 6x30 to 12mm SC Hex Adapters (Slash® 2wd Front & Slash® 4x4) Features Replacement 12mm Slash® SC Hex Adapters Fits any of Pro-Line's 6x30 Removable Hex Wheels Made from High-strength, Durable DuPont Nylon Material Overview This is a pair of Replacement 6x30 to 12mm SC Hex Adapters. Do you need replacement plastic 6x30 to 12mm Slash® SC Hex Adapters for your Pro-Line 6x30 Removable Hex SC Wheels? You came to the right place! This pack contains a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd and AE DR10 Rear) hexes and a pair of 12mm Slash® 2wd Front hexes for your 6x30 wheels. These hexes are made from High-strength, Durable DuPont Black Nylon Material and are built to take a beating. These Hex Adapters are proudly Made by Us in the USA. Get your replacement 6x30 to 12mm Hex Adapters today! Check out the 6x30 Wheel Hex Comparison Chart Slash® is a registered trademark of Traxxas® L.P. Search: 6354-00 | 6x30 to 12mm SC Hex Adapters for Pro-Line 6x30 Removable Hex Wheels Fits On Fits any of Pro-Line's 6x30 Removable Hex Wheels Product Specifications Manufacturer # 6354-00 Accessory Type Wheel Adapter Material Plastic Scale 1/10 Vehicle Type Short Course Truck
$9.99
Pro-Line PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator)
PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator) This is a pack of two Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires with included Open Cell Memory Foams. Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything the Race might throw at you. The Hyrax features an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line’s Legendary G8 material, so you know it provides performance you can depend on. Features: Ground up Design for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle tough terrain in Scale Style Made in the Legendary G8 Material Made in the USA, since 1982 Specifications: Height: 5.75" (146mm) Width: 2.15" (55mm) Includes: (2) Hyrax 2.2” G8 Rock Terrain Truck Tires (2) Open Cell Foam Inserts This product was added to our catalog on July 18, 2021
$39.95
Pro-Line PRO1011010, Interco TSL SX Super Swamper 2.8 MTD Raid 6x30 F/R
PRO1011010, Interco TSL SX Super Swamper 2.8 MTD Raid 6x30 F/R
$52.00
Pro-Line PRO1020011, Pro-Line 1/7 Toyo Proxes R888R S3 "Arrma Felony" Rear 53/107 2.9" BELTED MTD 17mm Spectre (2)
PRO1020011, Pro-Line 1/7 Toyo Proxes R888R S3 "Arrma Felony" Rear 53/107 2.9" BELTED MTD 17mm Spectre (2) (2) Pre-mounted Toyo Proxes R888R Tires on Spectre Gunmetal 17mm Wheels Licensed Toyo Proxes R888R Scale Replica of the High-performance Track Tire Maximum Street and Speed-Run Performance GT3-Inspired 10-spoke Wheel Design Satin Gunmetal finish This product was added to our catalog on January 20, 2024
$49.99
Pro-Line PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels
PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires feature a High-Performance herringbone weave pattern belt, molded inside the relentless, tall and grippy tread of the Trencher HP tire. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Features: Tires: Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 3.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.70" (170mm) Width: 4.15" (105mm) Includes: (2) Pre-Mounted Trencher HP 3.8" Belted Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 20, 2021
$74.99
Pro-Line PRO635500, 6x30 to 12mm ProTrac SC Hex Adapters 6x30 SC Whls
PRO635500, 6x30 to 12mm ProTrac SC Hex Adapters 6x30 SC Whls This item was added to our catalog March 3, 2022
$11.99
Pro-Line PRO632502, RC Body Paint - Red
PRO632502, RC Body Paint - Red
$9.99
Pro-Line PRO617400, Pro-Line 1.9" XL Dual Stage Rock Crawling Foam Inserts (2) (Closed Cell Inner/Soft Outer)
PRO617400, Pro-Line 1.9" XL Dual Stage Rock Crawling Foam Inserts (2) (Closed Cell Inner/Soft Outer) Pro-Line 1.9" Dual Stage Closed Cell Rock Crawling Foam Inserts feature a lightweight, waterproof blue closed cell foam inner ring, with a soft open cell outer ring, and are perfectly sized for Pro-Line 1.9” XL sized crawler tires. The inner insert is contoured to match the shape of the big XL size tires, while the soft outer foam provides maximum grip and maintains a fully supported sidewall to give them the correct shape, improved performance and maximum side-hilling performance. These inserts are extremely durable and will go the distance no matter where your adventure takes you. Features: Dual stage for incredible grip and sidewall support Contoured to perfectly match Pro-Line’s 1.9” XL Tires Extremely Durable Closed Cell Foam Lightweight and Waterproof Inner Closed Cell for Unmatched Sidewall Support Soft Outer for Maximum Traction Improved Performance and Appearance Unique Pro-Line Blue and White Color Fits: Interco TSL SX Super Swamper XL 1.9” (PRO1197-14) Flat Iron XL 1.9” (PRO10112-00) BFGoodrich Baja T/A KR2 1.9” (PRO10118-14) Hyrax 1.9” (PRO10128-14) NOTE: These are not a direct fit on Incision Method MR307 (INCIRC00091, INCIRC00100), or KMC XD820 (INCIRC00110, INCIRC00111) 1.9 size wheels and will require modification to the foam. Specifications: Height: 4.15" (105mm) Width: 1.60" (41mm) Outer Thickness: 0.75" (19mm) This product was added to our catalog on October 19, 2021
$22.99
Pro-Line PRO119210, Pro-Line Masher 2.8" Pre-Mounted w/Raid Electric Rear Wheels (2) (Black) (M2) w/Removable Hex
PRO119210, Pro-Line Masher 2.8" Pre-Mounted w/Raid Electric Rear Wheels (2) (Black) (M2) w/Removable Hex This is a set of two Pro-Line Masher 2.8 Tires Pre-Mounted on Raid Electric Rear Wheels. These pre-mounts are intended for use on the rear of the Traxxas electric Stampede and Rustler trucks. Pro-Line takes the guess work out of your glue job by doing the mounting for you so you can spend your time having fun! The Mashers ultra-modern Chevron Style tread digs deep into the roughest and toughest terrain and looks mean doing it. The side tread of this behemoth tire features a hook shape that craters the dirt and achieves unparalleled side traction. After fitting your truck with this massive Masher tread you'll be ready for back yard thrashing and mashing on any neighborhood terrain. The Masher 2.8” tire is perfect for the Traxxas Stampede 2WD and 4WD (Front and Rear) and Traxxas Rustler 2WD and 4WD (Front and Rear) and the JATO Rear. Impress your friends – Get a set of Pre-Mounted Mashers today! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) for extreme use! These new Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! The Raid wheels feature a detailed 10-spoke design that recreates the latest in high performance full size forged racing wheels with the strength and durability to match the bold look. Molded-in bead-loc detail only adds to the realism. These wheels are proudly Made by Us in the USA and are destined to change the wheel game forever! Get your new Badlands MX28 2.8” Tires on Raid Removable Hex Wheels today! Tire Features: Ultra-Traction Chevron type Tread Adds Tough and Aggressive Monster Truck Styling to your Truck Designed to Tackle any Terrain Spend Less Time Gluing and More Time Having Fun Made in the USA, since 1982 Wheel Features: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line’s 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 4.90" (124mm) Width: 2.78" (71mm) This product was added to our catalog on May 22, 2021
$51.24
Pro-Line PRO635900, PowerStroke Front Shocks: Kraton/Outcast/Senton
PRO635900, PowerStroke Front Shocks: Kraton/Outcast/Senton Pro-Line Arrma PowerStroke Front Shocks fit ARRMA 3S BLX and Mega models. These Pro-Line shocks feature 14mm big bore aluminum shock bodies with infinite spring pre-load adjustment, strong machined aluminum shock caps, beefy 3.5mm shock shafts, and true dual-rate springs for a massive performance and durability upgrade over the stock shocks. For the 3S models, all you need to do is fill the shocks with oil, install, and go! Features: High-Performance Shock Upgrade for ARRMA® 3S and Mega vehicles 14mm Big Bore Aluminum Shock Bodies with Infinite Spring Pre-load Adjustment Strong Machined Aluminum Shock Caps Beefy 3.5mm Shock Shafts True Dual-Rate Springs Included Injection Molded, Super Durable Shock Shaft Guard and Shock Ends Dual O-ring Seals and Upper and Lower Shock Shaft Guides Pre-assembled Just Add Oil! Fits: Senton™ 3S Front Typhon™ 3S Front Granite™ 3S Front Specifications: Extended Length: 101.0 mm for 3S Collapsed Length: 71.0 mm for 3S Includes: (2) Pre-assembled Front PowerStroke Shocks This product was added to our catalog on January 15, 2024
$67.99
Pro-Line PRO1019810, Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires (Black) (2) (Z3) w/Raid Wheels
PRO1019810, Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires (Black) (2) (Z3) w/Raid Wheels Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires with Raid Wheels. These Badlands are based on the MX43 tire and features the same aggressive tread combination. Now mounted on the Raid wheels, these tire and wheels weigh 20% less than prior models. Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the Badlands MX57 tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design.The Raid 5.7" wheels use a 24mm hex with the standard 1/5 scale through hole to fit most 1/5 scale vehicles like the Arrma Kraton 8S and includes machined aluminum wheel washers to fit onto the Traxxas X-Maxx platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and lightweight. Features: Tires: Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Nearly 20% Lighter than the Previous Version Foam Inserts Included Made in the USA, since 1982 Wheels: 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX® Platform Extremely Tough with Bold Style to Match Blacked-out Raid Wheel Styling Specifications: Scale: 1/6 Package Type:Pre-Mounted Wheel Width:5.7" Inner Diameter: 5.7" Width: 3.72" (94 mm) Height: 8.35" (212 mm) Weight: 682 grams (1.5lbs) Tire Compound:Medium Vehicle Type:Monster Truck Tire Type:All-Terrain Tire Tread:Badlands MX57 Wheel Position:Front/Rear Wheel Type:Raid Wheel Hex Size: 24mm Includes: (2) Pre-Mounted Badlands MX57 All Terrain Tires (2) Aluminum hub adapters This product was added to our catalog on March 31, 2021
$84.99
Pro-Line PRO636200, Pro-Line Extended Front & Rear Body Mount Kit (Rustler 4X4)
PRO636200, Pro-Line Extended Front & Rear Body Mount Kit (Rustler 4X4) This is the Pro-Line Extended Front and Rear Body Mount Kit with Secure-Loc Caps, for the Traxxas Rustler 4x4. This mount kit includes adjustable body mounts so you can fit different bodies onto your truck while still working with the stock body. Instead of just using the stock body mounting system that always causes your body to pop off and go flying, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more ejected bodies! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety and security. Features: Completely Adjustable Body Mounts for Fitting Different Style Bodies on to your Rustler® 4x4 Innovative Screw-on Body Mounting System using Secure-Loc Caps Never Worry About your Body Popping Off Again! Still Works with the Stock Body Long Body Mounts Included Made from Ultra-Durable Nylon Includes: Body Mounts and Posts (Front & Rear) Mounting Hardware Compatible With: Rustler 4x4 This product was added to our catalog on March 15, 2021
$24.99
Pro-Line PRO357900, 1/10 1999 Ford Mustang Clr Bdy: Drag Car
PRO357900, 1/10 1999 Ford Mustang Clr Bdy: Drag Car
$64.99 $51.99
Pro-Line PRO357200, 1/10 1972 Ford Pinto Clear Body (11.25" Wheelbase): Buggy Drag Car
PRO357200, 1/10 1972 Ford Pinto Clear Body (11.25" Wheelbase): Buggy Drag Car
$65.00
Pro-Line PRO632802, RC Body Paint - Fluorescent Yellow
PRO632802, RC Body Paint - Fluorescent Yellow
$9.99
Pro-Line PRO632505, RC Body Paint - Green
PRO632505, RC Body Paint - Green
$9.99
Pro-Line PRO632600, RC Body Paint - Aluminum
PRO632600, RC Body Paint - Aluminum
$11.99
Pro-Line PRO119411, 1/16 Trencher 2.2 M2 Tire Mnt Desperado Whl:ERevo
PRO119411, 1/16 Trencher 2.2 M2 Tire Mnt Desperado Whl:ERevo
$39.99
Pro-Line PRO1016110, Pro-Line Street Fighter LP 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex
PRO1016110, Pro-Line Street Fighter LP 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex The Pro-Line Street Fighter Low Profile 2.8" Tires with Raid 6x30 Removable Hex Wheels take the guess work out of your glue job by doing the mounting for you so you can spend more time having fun! Looking for the ultimate street tire? Then check out Pro-Line's Street Fighter LP (Low Profile) 2.8” Tire perfect for your Rustler 2WD and 4WD, Stampede 2wd and 4x4 and the 2WD JATO. Based on the latest in high performance on-road tire technology, the Street Fighter LP 2.8" tire has the perfect balance of G force enhancement and style that will keep your truck turning heads! Street Fighter tires comes Pre-Mounted on a true next generation 2.8” wheel design from Pro-Line, the Raid 2.8” Removable Hex Wheel for all 2.8” tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also imagine being able to replace a damaged wheel hex without needing to replace your glued tires (6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (6336-00 Sold Separately) for extreme use! These Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Features: Tire: Street Tread Perfect for your Rustler® 2wd or Rustler® 4x4 Grip and Rip on Asphalt and Concrete Aggressive Long Wear Street Tread Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Fits: Rustler 2wd Rustler 4x4 Stampede 2wd Stampede 4x4 JATO Rear Specifications: Height: 4.07" (103mm) Width: 2.05" (52mm) Includes: (2) Street Fighter LP 2.8” Tires (2) Foam Inserts This product was added to our catalog on May 7, 2021
$41.00
Pro-Line PRO6359-01, Pro-Line Arrma PowerStroke Rear Shocks (3S BLX/Mega)
PRO6359-01, Pro-Line Arrma PowerStroke Rear Shocks (3S BLX/Mega) Pro-Line Arrma PowerStroke Rear Shocks fit ARRMA 3S BLX and Mega models. These Pro-Line shocks feature 14mm big bore aluminum shock bodies with infinite spring pre-load adjustment, strong machined aluminum shock caps, beefy 3.5mm shock shafts, and true dual-rate springs for a massive performance and durability upgrade over the stock shocks. For the 3S models, all you need to do is fill the shocks with oil, install, and go! Features: High-Performance Shock Upgrade for ARRMA® 3S and Mega vehicles 14mm Big Bore Aluminum Shock Bodies with Infinite Spring Pre-load Adjustment Strong Machined Aluminum Shock Caps Beefy 3.5mm Shock Shafts True Dual-Rate Springs Included Injection Molded, Super Durable Shock Shaft Guard and Shock Ends Dual O-ring Seals and Upper and Lower Shock Shaft Guides Pre-assembled Just Add Oil! Fits: Senton™ 3S Rear Typhon™ 3S Rear Granite™ 3S Rear Specifications:Extended Length: 116.0 mm for 3SCollapsed Length: 80.0 mm for 3S Includes: (2) Pre-assembled Rear PowerStroke Shocks This product was added to our catalog on January 15, 2024
$67.99
Pro-Line PRO1019610, 1/10 Demolisher F/R 2.8" MT MTD 12mm Blk Raid (2)
PRO1019610, 1/10 Demolisher F/R 2.8" MT MTD 12mm Blk Raid (2) Fits: Stampede 2wd Stampede 4x4 Granite™ (ARA102727, ARA4202V3 and ARA4302V3) with the use of 14mm Hex Adapters PRO634600 or PRO634700 Other 1:10 Monster Trucks with 12mm Hexes Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks! 12mm (narrow & wide) (PRO633700 12mm Aluminum Narrow / PRO633701 12mm Aluminum Wide / PRO633500 12mm Plastic Narrow and Wide) 14mm (PRO634600 14mm Aluminum / PRO634700 14mm Plastic) 17mm (PRO633800 17mm Aluminum / PRO633600 17mm Plastic)
$47.99
Pro-Line PRO635005, Replacement Slipper Pads for 6350-00
PRO635005, Replacement Slipper Pads for 6350-00
$21.99
Pro-Line PRO632905, RC Body Paint - Window Tint
PRO632905, RC Body Paint - Window Tint
$19.99
Pro-Line PRO632700, RC Body Paint - Pearl Blue
PRO632700, RC Body Paint - Pearl Blue
$12.00
Pro-Line PRO632801, RC Body Paint - Fluorescent Orange
PRO632801, RC Body Paint - Fluorescent Orange
$9.99
Pro-Line PRO632509, RC Body Paint - Mojave Sand
PRO632509, RC Body Paint - Mojave Sand
$9.99
Pro-Line PRO632300, RC Paint Primary Color Set -Rdc,Wht,Blk,Rd,Ylw,Bl
PRO632300, RC Paint Primary Color Set -Rdc,Wht,Blk,Rd,Ylw,Bl
$49.99
Pro-Line PRO278100, Pro-Line Rock Shooter 1.9" Aluminum Composite Internal Bead-Loc Wheels (2)
PRO278100, Pro-Line Rock Shooter 1.9" Aluminum Composite Internal Bead-Loc Wheels (2) The Pro-Line Rock Shooter 1.9" Black Aluminum Composite Internal Bead-Loc Wheels feature scale detailing on a design that is simple to use, only requiring 6 screws per wheel for mounting tires. The face of the Rock Shooter has been CNC machined in the USA to exacting tolerances for a quality finished product. The unique 3-piece wheel design bolts together in the back and locks on to Pro-Line's list of 1.9" crawling tires the same way as Pro-Line’s Impulse 1.9" plastic wheel. The overall wheel width and wheel offset are the same as Pro-Line's Impulse 1.9" plastic wheels, giving a reliable fit to match the products detailed design. Features: All New Rock Shooter 12 Hole Wheel Style The Next Level of Scale Realism CNC Machined-Aluminum Wheel Face 12mm Hex Pocket Milled into the Wheel Shiny Raw Aluminum Machined Finish on Wheel Face 3-piece Wheel Design fits Pro-Line's 1.9" Crawling Tires Wheel Center and Wheel Back Made from high-strength, durable DuPont Nylon Made in the USA, since 1982 Includes: (2) Rock Shooter 1.9" Machined-Aluminum Wheel Face (2) Black Plastic Wheel Back (2) Black Plastic Internal Bead-Loc Ring (12) M2.5 x 8 SHCS This product was added to our catalog on September 24, 2021
$62.99
Pro-Line PRO1011610, Prime 2.8 MTD Raid Black 6x30 F/R
PRO1011610, Prime 2.8 MTD Raid Black 6x30 F/R
$52.00
Pro-Line PRO355000, Pro-Line 1972 Plymouth Barracuda Short Course No Prep Drag Racing Body (Clear)
PRO355000, Pro-Line 1972 Plymouth Barracuda Short Course No Prep Drag Racing Body (Clear) The Pro-Line 1972 Plymouth Barracuda Body was developed specifically for No Prep and Street Eliminator Drag Racing. This ultra-scale body captures all the signature details of this iconic E-body Mopar. It includes an extensive decal sheet with Hemi quarter-panel billboard graphic and optional add-on spoiler. Transform your Slash 2wd, AE DR10, or custom built conversion into a scale 1/4-mile beast with this legendary muscle car body. To create the most scale look possible, the body is designed with a narrower track width than a traditional SC body. It is a direct fit on the AE DR10, but your 2wd Slash® will require some modifications to fit correctly. See modification list below. Features: Fully Licensed 1972 Plymouth Barracuda Perfect for No-Prep Drag Racing Incredible Scale Detail with a One-Piece Body Design Optional add-on Rear Spoiler with Hardware Included Made from Durable Polycarbonate Includes Hemi Quarter-Panel Livery Graphics Paint-then-peel Overspray Film Included Made in the USA, since 1982 Here is the list of modifications needed to fit the Cuda on a Slash® 2wd: Pro-Line Extended Body Mounts for Slash® 2wd Traxxas® Bandit® Front Arms - TRA2531X Traxxas® Bandit® Rear Arms - TRA2750R Traxxas® Bandit® Front Caster Blocks - TRA2432 Traxxas® Bandit® Steering Blocks - TRA3636 Traxxas® Bandit® Axles - TRA2437 Traxxas® King Pins - TRA3740 Traxxas® Front Camber Turnbuckles - TRA2444 Traxxas® Rear Turnbuckles - TRA2443 Traxxas® Toe Link Turnbuckles - TRA2445 Shorten Rear Drive Shafts Remove Front Bumper Specifications: Length: 23.0" (584mm) Width Front: 11.0" (279mm) Width Rear: 11.5" (292mm) Height: 5.9" (150mm) Wheelbase: 13.2" (335mm) Includes: 1972 Plymouth Barracuda Clear Body and Spoiler Rear Spoiler Hardware Detailed Decal Sheet Window Masks This product was added to our catalog on August 7, 2021
$64.99 $51.99
Pro-Line PRO10216-02, Pro-Line 1/4 Hole Shot Motocross Rear Tire (1) (M3)
PRO10216-02, Pro-Line 1/4 Hole Shot Motocross Rear Tire (1) (M3) Pro-Line 1/4 Hole Shot Motocross Rear Tire. This iconic mini-pin Hole Shot tread design tire will bring the competition quality that we all know and trust to provide the optimum level of traction in dusty, hard-packed, and grooved conditions for your Promoto-MX motocross dirt bike! Take your Promoto-MX to the next level of track performance and experience the legendary traction of the Hole Shot tire! NOTE: Not recommended for use on asphalt. Features: Perfect fit and upgrade for the Losi PROMOTO-MX 1/4 dirt bike Competition-level Tire for the Losi PROMOTO-MX Iconic Hole Shot Style Small, Square-lug Technology Throughout Tire Long-Lasting Closed Cell Foam Insert Included Ideal for Dusty, Hard-Packed, Grooved, Watered Dirt Tracks Made in the USA Specifications: Scale: 1/4 Tread: Hole Shot Inner Tire / Outer Wheel Diameter: 4.6" Width: 1.61" (41mm) Height: 6.14" (156mm) Track Surface: Off-Road, Race Hard Packed, Watered Wheel Position: Rear Includes: (1) Hole Shot Motocross Rear Tire (1) Closed Cell Insert This product was added to our catalog on July 3, 2023.
$19.99
Pro-Line PRO10217-02, Pro-Line 1/4 Hole Shot Motocross Front Tire (1) (M3)
PRO10217-02, Pro-Line 1/4 Hole Shot Motocross Front Tire (1) (M3) Pro-Line 1/4 Hole Shot Motocross Front Tire. This iconic mini-pin Hole Shot tread design tire will bring the competition quality that we all know and trust to provide the optimum level of traction in dusty, hard-packed, and grooved conditions for your Promoto-MX motocross dirt bike! Take your Promoto-MX to the next level of track performance and experience the legendary traction of the Hole Shot tire! NOTE: Not recommended for use on asphalt. Features: Perfect fit and upgrade for the Losi PROMOTO-MX 1/4 dirt bike Competition-level Tire for the Losi PROMOTO-MX Iconic Hole Shot Style Small, Square-lug Technology Throughout Tire Long-Lasting Closed Cell Foam Insert Included Ideal for Dusty, Hard-Packed, Grooved, Watered Dirt Tracks Made in the USA Specifications: Scale: 1/4 Tread: Hole Shot Inner Tire / Outer Wheel Diameter: 4.9" Width: 1.2" (30mm) Height: 6.37" (162mm) Track Surface: Off-Road, Race Hard Packed, Watered Wheel Position: Front Includes: (1) Hole Shot Motocross Front Tire (1) Closed Cell Insert This product was added to our catalog on July 3, 2023.
$19.99
Pro-Line PRO632803, RC Body Paint - Fluorescent Green
PRO632803, RC Body Paint - Fluorescent Green
$9.99
Pro-Line PRO632804, RC Body Paint - Fluorescent Blue
PRO632804, RC Body Paint - Fluorescent Blue
$9.99
