TAM85029, Tamiya TS-29 Semi-Gloss Black Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-29 Semi-Gloss Black Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on March 22, 2021
TAM86012, Tamiya PS-12 Silver Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-12 Silver Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM86006, Tamiya PS-6 Yellow Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-6 Yellow Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM85080, Tamiya TS-80 Flat Clear Lacquer Spray Paint (100ml) (NEW)
This Tamiya 100ml TS-80 Flat Clear Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on March 26, 2023
TAM81716, Tamiya XF-16 Flat Aluminum Acrylic Paint (10ml)
This Tamiya 10ml XF-16 Flat Aluminum Acrylic Paint is made from water-soluble acrylic resins and is excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily. Prior to curing, paint can be washed away with plain water.
Note:
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
This product was added to our catalog on August 22, 2021
TAM85027, Tamiya TS-27 Matte White Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-27 Matte White Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on March 22, 2021
TAM85046, Tamiya TS-46 Light Sand Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-46 Light Sand Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on April 6, 2021
TAM86030, Tamiya PS-30 Brilliant Blue Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-30 Brilliant Blue Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
DTXR4262, DuraTrax Polycarb Silver Streak Lexan Spray Paint (4.5oz)
This is a 4.5 ounce bottle of DuraTrax Polycarb Silver Streak. When you need paint for your projects, depend on Duratrax. Custom-blended in all of the most popular colors, durable Duratrax paints deliver excellent coverage and spray patterns for polycarbonate R/C car bodies. The can sizes are larger (4.5 oz), so they go farther, with color-matching lids for instant color recognition.
This product was added to our catalog on June 28, 2021
TAM86063, Tamiya PS-63 Bright Gun Metal Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-63 Bright Gun Metal Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on August 10, 2021
TAM86034, Tamiya PS-34 Bright Red Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-34 Bright Red Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM86013, Tamiya PS-13 Gold Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-13 Gold Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM86015, Tamiya PS-15 Metallic Red Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-15 Metallic Red Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM86046, Tamiya PS-46 Purple/Green Iridescent Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-46 Purple/Green Iridescent Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
NOTE: A layer of PS-5 Black should be applied after iridescent paint for better visual effect.
This product was added to our catalog on May 18, 2021
TAM85018, Tamiya TS-18 Metallic Red Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-18 Metallic Red Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on April 23, 2021
TAM86060, Tamiya PS-60 Bright Mica Red Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-60 Bright Mica Red Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 8, 2021
DTXR4273, DuraTrax Polycarb Candy Purple Lexan Spray Paint (4.5oz)
This is a 4.5oz spray can of Duratrax Paint in Candy Purple for Polycarbonate (Lexan) RC Vehicle Bodies.
NOTE: It is very important to spray thin, even coats to avoid runs or heavy build up. Be careful not to apply paint too thick, use too many coats, or not allow paint to fully cure between coats. Any more than three coats of paint will start to cause issues with the color and result in a slight yellowish gold appearance.
This product was added to our catalog on November 30, 2021
DTXR4266, DuraTrax Polycarb Spray (Metallic Green) (4.5oz)
This is a 4.5oz spray can of Duratrax Paint in Metallic Green for Polycarbonate RC Vehicle Bodies. NOTE; It is very important to spray thin, even coats to avoid runs or heavy build up. Be careful not to apply paint too thick, use too many coats, or not allow paint to fully cure between coats. Any more than three coats of paint will start to cause issues with the color and result in a slight yellowish gold appearance.
This product was added to our catalog on March 26, 2021
TAM85040, Tamiya TS-40 Metal Black Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-40 Metal Black Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on August 22, 2021
TAM85101, Tamiya TS-101 Base White Lacquer Spray Paint (100ml)
This Tamiya TS-101 Base White Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. Painting light colors onto dark plastic always poses the risk of a compromised topcoat tone. This shade of Base White is very opaque and creates a superb base, even on dark plastic, ensuring true and clear topcoat tones.The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on March 2, 2021
TAM86055, Tamiya PS-55 Polycarbonate Flat Clear Spray Paint (100ml)
This is a 100ml can of Tamiya PS-55 Polycarbonate Flat Clear Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on February 1, 2021
TAM85015, Tamiya TS-15 Blue Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-15 Blue Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on August 22, 2021
DTXR4254, DuraTrax Polycarb Spray (Racing Red) (4.5oz)
This is a 4.5oz spray can of Duratrax Paint in Racing Red for Polycarbonate RC Vehicle Bodies.
This product was added to our catalog on March 30, 2021
TAM85047, Tamiya TS-47 Chrome Yellow Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-47 Chrome Yellow Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on August 22, 2021
TAM86032, Tamiya PS-32 Corsa Gray Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-32 Corsa Gray Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM86008, Tamiya PS-8 Light Green Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-8 Light Green Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on April 18, 2021
TAM86007, Tamiya PS-7 Orange Lexan Spray Paint (100ml)
This is a 100ml can of Tamiya PS-7 Orange Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This product was added to our catalog on May 18, 2021
TAM85021, Tamiya TS-21 Gold Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-21 Gold Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on October 24, 2021
TAM85030, Tamiya TS-30 Silver Leaf Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-30 Silver Leaf Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on August 22, 2021
TAM85023, Tamiya TS-23 Light Blue Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-23 Light Blue Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on August 22, 2021
TAM85083, Tamiya TS-83 Metallic Silver Lacquer Spray Paint (100ml)
This Tamiya 100ml TS-83 Metallic Silver Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
This product was added to our catalog on March 26, 2021
