EXO2028, Exotek TLR 22S Drag Slipper Eliminator (Kimbrough Spurs)This product was added to our catalog on December 16, 2021

Read more less

Exotek F1 Ultra Extra Light Front Wing. This replacement wing is intended for the Exotek F1 Ultra. Made from molded nylon, this lightweight wing uses a higher mounting base to reduce the chance of it dragging on the track. Package includes one front wing.NOTE: Only compatible with the short wheelbase if using the optional sway bar set.Specifications:Weight: 18g

Read more less

Exotek F1 Ultra Extra Light Rear Wing. This replacement wing is intended for the Exotek F1 Ultra. Made from molded nylon, this lightweight wing helps reduce weight while providing high downforce. Package includes one front wing. Specifications: Weight: 21g

Read more less

EXO2027, Exotek TLR 22S Drag Aluminum & Delrin Wheelie Wheels (Black) (2) Exotek 22S Drag Aluminum and Delrin Wheelie Wheels are a CNC machined wheelie bar wheel option for the Losi 22S Drag car. The center wheel is machined from billet 6061 while the tires are machined from delrin. Special touches like silver cuts on the wheel and laser etched logos gives your car that factory racing look while adding a few grams of rear weight to the bar for more rear traction. Each wheel weighs 8 grams and uses the stock 22S wheelie wheel bearings. Package includes two wheelie bar wheels. This product was added to our catalog on August 31, 2021

Read more less

EXO2080, Exotek B6.3 Locked Spur Mount Set w/Titanium Bolt The Exotek B6.3 Locked Spur Mount Set is an optional upgrade for the stock laydown/layback Associated B6.3-B6.2 top shaft. This super light locked spur mount features a titanium center bolt to create the lightest Exotek spur locker yet. Ideal for 17.5 stock buggy and high powered street eliminator drag racing. The design allows for easy switching between a locked spur or slipper as track conditions warrant. The mount and hardware weighs in at 5.1 grams total and is compatible with a wide range of available spur gear sizes by Exotek and Kimbrough. Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Compatible Spur Gears: Kimbrough KIM301 66 tooth KIM150 69 tooth KIM143 72 tooth KIM161 73 tooth KIM162 74 tooth Exotek EXO1543 66 tooth EXO1544 69 tooth EXO1590 72 tooth EXO1545 75 tooth EXO1546 78 tooth This product was added to our catalog on November 7, 2023

Read more less

EXO1946, Exotek TLR 22 Aluminum HD Servo Horn (25T)This product was added to our catalog on December 16, 2021

Read more less

EXO1942, Exotek DR10/DB10/SC10 Eliminator Pro Spur Mount (Kimbrough/Exotek Spurs)This product was added to our catalog on December 16, 2021

Read more less

EXO2020, Exotek TLR 22S Drag Lightweight Idler GearThis product was added to our catalog on December 16, 2021

Read more less

EXO2032, Exotek TLR 22S Drag Titanium Lightweight Rear CVA Axles (2) (Drag Racing Only)This product was added to our catalog on December 16, 2021

Read more less

EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes: (2) 72mm CVD Axle Assemblies (2) Differential Outdrives (6) Set Screws  This product was added to our catalog on January 19, 2022

Read more less

EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting. NOTE: Requires blue thread lock and cvd oil or grease (not included). Includes: (2) 76mm CVD Axle Assemblies (2) Differential Outdrives (6) Set Screws This product was added to our catalog on May 19, 2021

Read more less

EXO1939, Exotek Traxxas Slash Eliminator Spur Mount The Exotek Traxxas Slash Eliminator Spur Mount is a heavy duty, yet light weight option to eliminate the slipper system in any 1/10 Traxxas 2wd Slash or Bandit. Weighing just 3 grams, this mount deletes the slipper components and cuts out about 10 grams of rotating mass from the transmission. This is a great upgrade for speed run cars and drag race set ups, and is compatible with 2wd Slash spur gears. Features:Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2wd Slash and Bandit buggies and trucksWeighs just 3 grams, and deletes the slipper components removing approximately 10 gramsIdeal for speed run and drag race buildsCompatible with 2wd Slash spur gears This product was added to our catalog on December 16, 2021

Read more less

EXO1949, Exotek RC10B6.2 Aluminum HD Front Wing Mount (Black/Blue)This product was added to our catalog on December 16, 2021

Read more less

EXO1967, Exotek F1 Ultra HD Carbon Fiber LiPo CupThis product was added to our catalog on December 16, 2021

Read more less

EXO2002, Exotek Adjustable Wheelie Double Wheel Conversion This product was added to our catalog on December 16, 2021

Read more less

EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit TX VADER drag chassis conversion set. Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS. Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US. Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market. Based on the excellent handling and proven 22 VADER design. This pro chassis conversion set features - Carbon fiber made and machined in USA - Heavy duty 2.5mm thick chassis and side rail plates - Centralized servo mounting for improved balance - Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup - Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes) - 6 heavy duty alloy side rail posts - Pro AE B6 style full ball bearing supported steering rack and crank set - Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.) - Alloy parts are finished in glossy black with blue chamfers for that factory racing look - Carbon fiber top bulkhead plate - Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance - 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds - The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability. - Offers multiple weight balance options to maximize grip on the street or on the track - Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm) - Includes a lipo hold set - Includes large Exotek logo stickers - Includes instruction sheet Other option parts shown not included. Wheelie bar shown is not included. Requires assembly. Shown assembled for display purposes only Also required: Traxxas 2wd SLASH or BANDIT kit Traxxas body mount set TRA1914R Traxxas toe link set TRA3745 or TRA3139A (2 sets needed) This product was added to our catalog on December 16, 2021

Read more less

EXO2045, Exotek B6.3 Aluminum Wing Mounts (Black/Blue) (2)This product was added to our catalog on December 16, 2021

Read more less

EXO2051, Exotek 48P MK3 Machined Delrin Octalock Spur Gear (84T)This product was added to our catalog on December 16, 2021

Read more less

EXO2050, Exotek 48P MK3 Machined Delrin Octalock Spur Gear (81T)This product was added to our catalog on December 16, 2021

Read more less