All batteries must be shipped by a ground shipping method. Another great HV LiPo choice in the RDQ Series. This one was designed specifically for the EMAX TinyHawk S, but it's a great pack for any 2S lightweight micro! We also carry a similar sized pack in XT30. Check out the entire RDQ Series of LiPo and LiHV battery packs! Specifications Capacity: 300mAh Max. Continuous Discharge Rate: 50C Discharge Lead: 25mm, PH2.0 Balance Lead: 15mm, JST-XH  Dimensions: 45x17x14mm Weight: 15.8g Includes RDQ Series 7.6V 2S 300mAh 50C LiHV Micro Battery - PH2.0

Read more less

The CineLog35 Frame developed by CEPRC for mounting GoPro cameras is now officially released. CL35 is an improvement on the CL30 Cinelog30 frame. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with Vista HD image transmission. The propeller guard adopts an integrated design, and the overall structure is firmer. GEP also upgraded the power system and chose a 12mm x 12mm motor hole position. When compared to CL30, the CL35 can install a larger 15-18-20 series motor, with a 3.5-inch propeller, and it has stronger power output. They've improved the damping rings, the shooting effect is more stable and clearer and you can use 3D prints to install the GoPro 8, GoPro 9, and GoPro 10. Or use the base to install a naked GoPro 8, Insta360 GO2, or Caddx Peanut camera. We pursue lighter body weight, better flying feel, and more extended functions. Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line! Specifications Dimensions: 203x203x42mm (Including the propeller guard) Frame Style: Cinewhoop Top plate: 2.5mm Bottom plate: 2.0mm Arm Plate: 3.5mm Stack Size: 26.5mm x 26.5mm Motor Mount: 12x12mm Camera Mount: 14-19mm (Nano and Micro) Weight: 130.7g (with Prop guards, and 3D printed parts included) Recommended:  Motor: EMAX ECO II 2004 2000Kv Motor FC/ESC: GEPRC F722 2-6S F7 AIO 2 45A 8-bit ESC Prop: HQ Prop T90MMX3 Tri-Blade 3.5" Cinewhoop Prop 4 Pack LiPo: RDQ Series 22.2V 6S 1300mAh 100C LiPo Battery Includes 1x Top Plate 2.5mm 1x Arm Plate 3.5mm 1x Bottom Plate 2.0mm 2x Propeller guards 1x Power cable combination 1x  Screw combination 1x  Screwdriver combination 1x  3D Print mountings combination 1x Other Parts

Read more less

For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog the four mainstream video transmission systems on the market. The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 Air Unit shooting, which can achieve an excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life. It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras. Find the recommended 4S 450-750mAh batteries here! Check out our other pre-built quads, as well as the rest of our GEPRC selection. Features Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect. Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning. 2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting. SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried. Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted. The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible. Specifications Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ Walksnail Avatar & Micro Cam - ELRS 2.4GHz Frame: GEP-CL20 Wheelbase: 100mm Gimbal plate: 2.0mm Top plate: 2.5mm Bottom plate: 1.5mm FC system: GEP-F411-35A AIO MCU: STM32F411CEU6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E chip ESC: 8Bit 35A VTX: GEPRC 5.8GHz@600mW Camera: Caddx Ratel2 Antenna: GEPRC Peano 5.8G RHCP MMCX Motor: GR1303.5 5500KV Propeller: EMAX Avan Micro 2×2.4×4 Receiver: ELRS2.4G Recommended battery: LiHv 4S 450mah-660mah Flight time: 4-6min Includes 1x CineLog20 Analog 2x 2-inch propellers (pairs) 1x Naked GoPro Base 2x M15×150mm battery strap 2x Battery Silicone Pads 2x EVA Landing Pads 1x Set of screws 1x L-shaped screwdriver (1.5mm) 1x Antenna fixed tube 1x 4S Naked GoPro power cable (with balanced terminal head) 2x EVA damping rings of guards 1x TBS Antenna mount (Vertical Type) 1x TBS Antenna mount (Horizontal Type) 1x TBS Antenna printed parts The screw package includes: 3x M2×12mm cup head screws 2x M2×5mm round head screws 1x M2×8mm round head screw with pad 3x M2×7mm round head screws 2x M2×8mm round head screws 2x M2 iron nuts 1x self-clinching nut

Read more less

As the next generation of FPV pilots comes to fruition, the EMAX engineers have created the ultimate introductory goggle for the digital HD quality experience. Designed in collaboration with HDZero, the EMAX Transporter II HD boasts a bright, sharp, high definition resolution display compatible with HDZero's open source wireless transmission protocol, offering ultra low-latency video feeds for FPV racing needs. Utilizing a DVR system, recording HD quality videos of your flights for sharing with friends or social media online has never been easier which opens up a way to show your experiences with everyone. Engineered to be a removable display, customizing the way you fly has become standard. From being held on a tripod stand utilizing the mount, to being attached to the EMAX E8 transmitter, the Transporter II HD is designed with every pilot and way of flying in mind. Built into the Transporter II HD is a USB-C port offering a standard power input for pilots to power their goggles with any power USB source from wall chargers to mobile battery packs. Integrated into the display is a powerful backup battery designed to keep pilots in the air, even when other power sources run dry. The EMAX Transporter II HD is the forefront of HD FPV innovation and growth, opening up a brand new technology to everyone. Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!     Features Specifications Dimensions: 95mm x 155mm x 84mm Weight: 411g (In goggle mode w/ antennas + strap) Display: 4.5” 720P 60Hz TFT USB-C Power Input: 5V 2A USB recommended Built-In Battery: 2200mAh LiPo Tripod Mount: 1/4“-20 Standard Tripod SD Card Slot: MicroSD (Supports up to 64GB) Includes 1x EMAX Transporter 2 HD FPV Goggles/Monitor w/ DVR For HDZero

Read more less

Transporter 2 FPV Goggle features a detachable screen which can optionally be paired to the E8 Transmitter, allowing pilots to customize their flying experience to suit their needs. Built into the Transporter 2 is a powerful receiver in order to give pilots the cleanest video feed possible while also featuring a built-in DVR, allowing users to record their FPV flights for review, or sharing flight footage with others. Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!   Specifications Charging System: Built-in USB 5V--1A linear li-ion battery charging system Dimensions: (w/o antenna + collasped) 155x100x90mm Frequency: 5.8GHz（5658MHz-5945MHz) Video Recording Settings: VGA/D1/HD (Off/3min/5min/10min) DVR: 32GB SD card (max), MJPEG, AVI Battery: 1300mAh Lithium-ion battery Resolution: 480X800 Weight: 398g Operating Voltage: 4.2V-3.7V Screen size: 4.3 inch Includes 1x EMAX Transporter 2 5.8GHz FPV Goggles w/ DVR & Removable Screen

Read more less

Replacement part for the TinyHawk II Race. Check out all our TinyHawk parts, and EMAX gear! Specifications Image Sensor: 1/3" CMOS Horizontal Resolution: 700TVL Lens: 2.1mm M8 S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control: Auto Min. Illumination: 0.01 LUX WDR: Auto Day/Night: Color Input Voltage: 3-5.5V Current: 110mA @ 5V Housing Material: ABS Net Weight: 3.2g Dimensions: 16x14x14mm Includes 1x EMAX TinyHawk II Race Replacement Camera - Runcam Nano 2

Read more less

Spare replacement part for the EMAX Tinyhawk II. Check out all our TinyHawk parts, and EMAX gear! Includes 1x EMAX Tinyhawk II Hardware Kit

Read more less

Replacement part for the EMAX TinyHawk II Freestyle Frame. Check out our selection of EMAX gear! Includes 1x EMAX TinyHawk II Freestyle Bottom Plate

Read more less

Spare replacement EMAX TinyHawk II AIO.Check out all our TinyHawk parts, and EMAX gear! Includes 1x EMAX TinyHawk II AIO Flight Controller ESC/VTX/RX

Read more less

Replacement Tinyhawk 3 hardware kit that includes a complete hardware set for your model including spares and rubber bands. Check out the rest of the Tinyhawk line and all our EMAX gear! Includes EMAX Tinyhawk III - Hardware Kit

Read more less

Replacement Tinyhawk 3 frame that includes all plastic pieces necessary to freshen up your model. Check out the rest of the Tinyhawk line and all our EMAX gear! Includes EMAX Tinyhawk III - Frame

Read more less

Replacement set of Avia TH propellers for the Tinyhawk 3.  Check out the rest of the Tinyhawk line and all our EMAX gear! Includes EMAX Tinyhawk III Avia Props 4 pack - RED 

Read more less

Replacement all-in-one flight controller and ESC for the Tinyhawk 3. Standard 26x26 whoop mounting pattern for DIY builds. Check out the rest of the Tinyhawk line and all our EMAX gear! Includes 1x EMAX Tinyhawk III 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX

Read more less

This is a replacement motor for the Emax Nanohawk X. This motor also be used on 2-3" builds! Check out our other Nanohawk X accessories, and all our EMAX selection! Specifications Kv: 11000Kv Input Voltage: 1S LiPo Motor Dimensions: Φ15mm x 16mm Stator Dimensions: Φ12mm x 025mm Shaft Diameter: 1.5mm Mounting Pattern: Φ9mm Weight (w/ wires): 4.5g Includes 1x EMAX TH 1202.5 11000Kv Motor

Read more less

Spare replacement part for the EMAX Tinyhawk Freestyle. Check out the rest of our TinyHawk Series Parts & Accessories and all our EMAX gear! Specifications Size: 1103 KV 7000kv Mounting Hole: M2 8mm 3 hole pattern. Center Hole clearing: 5mm Prop Mount: T mount Wire: Silicone Wire 26 AWG Includes 1x EMAX TH1103 7000Kv Motor

Read more less

All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

Read more less

The Emax RSIII motor is rated at 2306, which is a classic stator size for racing and freestyle, and works off 2500Kv, which is ideal for 4S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—The perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 4S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—The RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date. Specifications Framework: 12N14P Length: 32mm Diameter: 27.3mm No.of cells: 3-4S 2500Kv Propeller: 5"-5.5" Weight: 27.7g(W/O Silicone Wire)  2500Kv Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 1.8A Internal Resistance: 43mΩ Peak Current (6S): 43A Max Power (6S): 720W Includes 1x Emax RSIII Series 2306 2500Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

The Emax RSIII motor is rated at 2306, which is a classic stator size for racing and freestyle, and works off 2100Kv, which is ideal for 4-6S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 6S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.   Specifications Framework: 12N14P Length: 32mm Diameter: 27.3mm No.of cells: 3-6S 2100Kv Propeller: 5"-5.5" Weight: 27.8g(W/O Silicone Wire)  2100Kv Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 1.4A Internal Resistance: 57mΩ Peak Current (6S): 46A Max Power (6S): 1160W Includes 1x Emax RSIII Series 2306 2100Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

The Emax RSIII motor is rated at 2306, which is a classic stator size for racing and freestyle, and works off 1800Kv, which is ideal for 6S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 6S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.   Specifications Framework: 12N14P Length: 32mm Diameter: 27.3mm No.of cells: 3-6S 1800Kv Propeller: 5"-5.5" Weight: 27.9g(W/O Silicone Wire)  1800Kv Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 1.1A Internal Resistance: 68mΩ Peak Current (6S): 34A Max Power (6S): 860W Includes 1x Emax RSIII Series 2306 1800Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

The Emax RSIII motor is rated at 2207, which is a classic stator size for racing and freestyle, and works off 1800Kv, which is ideal for 6S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 6S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date. Specifications Framework: 12N14P Length: 33mm Diameter: 26.9mm No.of cells: 3-6S  1800KV  Propeller: 5"-5.5" Weight: 29.3g(W/O Silicone Wire)  1800KV Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 1.1A Internal Resistance: 72mΩ Peak Current (6S): 43A Max Power (6S): 1080W Includes 1x Emax RSIII Series 2207 1800Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

The Emax RSIII motor is rated at 2207, which is a classic stator size for racing and freestyle, and works off 2100Kv, which is ideal for 4-6S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 6S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date. Specifications Framework: 12N14P Length: 33mm Diameter: 26.9mm No.of cells: 3-6S  2100KV  Propeller: 5"-5.5" Weight: 29.4g(W/O Silicone Wire)  2100KV Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 1.5A Internal Resistance: 54mΩ Peak Current (6S): 50A Max Power (6S): 1260W Includes 1x Emax RSIII Series 2207 2100Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

The Emax RSIII motor is rated at 2207, which is a classic stator size for racing and freestyle, and works off 2500Kv, which is ideal for 4S 5" quads. Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 4S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations.  Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit! Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.  Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.  Have a look at the rest of our EMAX products, and our entire selection of motors! Features Precision bearing Titanium alloy shaft Anodizing 16x16mm hole pattern Multi-strand winding 120mm 20 AWG silicone wire Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor. While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make. The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.   Specifications Framework: 12N14P Length: 33mm Diameter: 26.9mm No.of cells: 3-4S 2500Kv Propeller: 5"-5.5" Weight: 29.4g(W/O Silicone Wire)  2500Kv Prop adapter shaft thread: M5 Bearing Shaft: 4mm Shaft Thread: CW Lead: 20#AWG 120mm Idle Current (10V): 2.1A Internal Resistance: 42mΩ Peak Current (6S): 45A Max Power (6S): 750W Includes 1x Emax RSIII Series 2207 2500Kv Motor 5x M3x8 Screw 5x M3x7 Screw 5x M3x6 Screw 1x Aluminum M5 nylock nut 1x Washer and Screw for shaft

Read more less

This is a replacement bottom plate for the EMAX Nanohawk X. Check out the rest of our Nanohawk replacements, as well as the rest of our EMAX selection! Includes 1x EMAX Nano hawk X Bottom Plate

Read more less

EMAX produces some of the most reliable, best value servos around. We carry several varieties for different sized aircraft.  Looking for the analog version? Check out all our Servos & Accessories and all our EMAX gear! Specifications Operating Voltage: 4.8-6.0V DC Standard Direction: Counter Clockwise, Pulset 1500 to 1900usec Stall Torque at 4.8V: 1.6Kgf.cm(21.0 oz.in) Operating Speed at 4.8V: 0.12 sec/60o at no load Stall Torque at 6.0V: 2.0Kgf.cm(28.0oz.in) Operating Speed at 6.0V: 0.10sec/60o at no load Size 23x11.5x24mm Weight: 12g Plug: JR Type: Digital Metal Gear Includes 1x ES08MD-II Servo 1x Control Horn Set 1x Screw Set 1x Instructions

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. Large EZO 12mm bearing for unparalleled smooth operation. 19x19mm Motor Mounting Specifications Weight: 54g Includes 1x EMAX ECO II 2807 1700Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II Series 2207 1900Kv Motor 

Read more less

Durable casing with premium internal. This metal-geared servo contains a Nobile potentiometer to ensure a high degree of accuracy. Looking for the digital version?  Check out all our Servos & Accessories and all our EMAX gear! Specifications Working voltage: 4.8V~6.0V Working current: 200mA/60° Speed: 0.12sec/60o at 4.8V; 0.10sec/60o at 6V Torque: 1.6/2.0 kg.cm (4.8V/6v) Materials: Metal Gear The line length: 25 cm Standard: Futaba/JR universal plug Size: 23 x 11.5 x 24 mm (1.25 x.45 x.94in) Weight: 12g / 0.42oz Includes 1x EMAX ES08MA II 12g Analog Metal Gear Servo

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II 2306 2400Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. Large EZO 12mm bearing for unparalleled smooth operation. 19x19mm Motor Mounting Specifications Weight: 54g Includes 1x EMAX ECO II 2807 1700Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II Series 2207 2400Kv Motor 

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II 2306 1900Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II 2306 1700Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors! Features A brand new design with a rounded bell and stronger attachment points for increased durability Fully mirror-polished finish that shines and glistens with even the smallest hint of light Upgraded N52SH curved arc magnets for tighter airgap and better performance Precision NSK bearing for unparalleled smooth operation Specifications Kv: 3000 Input Voltage: 3-6S Configuration: 12N14P Motor Dimensions: 24.7*19.2mm Stator Dimensions: 20*4mm Shaft Diameter: 1.5mm Wire Dimensions: 120mm 24awg Mounting Pattern: 12*12mm Weight (w/ wires): 18g Includes 1x EMAX ECO II 2004 3000Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors!     Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II Series 2207 1700Kv Motor 

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors! Features A brand new design with a rounded bell and stronger attachment points for increased durability Fully mirror-polished finish that shines and glistens with even the smallest hint of light Upgraded N52SH curved arc magnets for tighter airgap and better performance Precision NSK bearing for unparalleled smooth operation Specifications Kv: 2400 Input Voltage: 4-6S Configuration: 12N14P Motor Dimensions: 24.7*19.2mm Stator Dimensions: 20*4mm Shaft Diameter: 1.5mm Wire Dimensions: 120mm 24awg Mounting Pattern: 12*12mm Weight (w/ wires): 18g Includes 1x EMAX ECO II 2004 2400Kv Motor

Read more less

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Have a look at the rest of our EMAX products, and our entire selection of motors! Features A brand new design with a rounded bell and stronger attachment points for increased durability Fully mirror-polished finish that shines and glistens with even the smallest hint of light Upgraded N52SH curved arc magnets for tighter airgap and better performance Precision NSK bearing for unparalleled smooth operation Specifications Kv: 2000 Input Voltage: 4-6S Configuration: 12N14P Motor Dimensions: 24.7*19.2mm Stator Dimensions: 20*4mm Shaft Diameter: 1.5mm Wire Dimensions: 120mm 24awg Mounting Pattern: 12*12mm Weight (w/ wires): 18g Includes 1x EMAX ECO II 2004 2000Kv Motor

Read more less

All product containing lithium batteries must be shipped by a ground shipping method.Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk II Freestyle, the perfect beginner outdoor FPV quad! Check out all our pre-built quads, and our selection of EMAX gear! Features Durable aerospace grade 3k woven carbon fiber BlHeli_S ESC F4 (MATEKF411RX Firmware) Flight Controller RunCam Nano 2 FPV camera More powerful VTX with 25/100/200mw power levels Smart Audio connected FRSKY D8 compatible Efficient Emax 1103 7000Kv brushless motors Avan Rush 2.5" props   Specifications Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 Duo FPV System Ham radio license required for use in North America. VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)* Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II Freestyle BNF 2x EMAX 450mAh 1S HV Battery 1x 1S USB LiPo Charger 1x Hardware Kit

Read more less

The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3. Check out all our pre-built quads, and all our EMAX gear! Features Improved video transmission with DJI O3 system  More durable frame redesigned for resilience. Sub 250 grams Specifications Wheelbase: 155mm Dry Weight: 154g Frame Material: Carbon Fiber Prop: Avan 3.5  Maximum size: 210mm Input Voltage: 2-4S Lipo Includes 1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS

Read more less

The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well. Check out the rest of our 3" props, and all our EMAX selection! Specifications Diameter: 3" Blades: 2 Material: Polycarbonate Hub Thickness: 5mm Shaft Hole: 1.5mm Weight: 0.7g Includes 4x EMAX Avia Nano X Bi-Blade 3" Prop

Read more less

Of the new Scimitar line from EMAX, the 3.0 is the most durable, most aggressively pitched. If you want more speed with insane durability to handle high powered motors, this is the prop to go for. This is a great choice for hard flying freestyle. The ultimate basher prop. There is no perfect prop. Check out the other Scimitar options, try some out and see how they suit your build and flying style. Be sure to check out all our 5" props, and all our EMAX gear! Features Aggressive Pitch Highly Durable Specifications Diameter: 5" Pitch: 3" Blades: 3 Moment of Inertia: 24.1 g*cm^2 Material: Polycarbonate Weight: 5.4g  Includes 4x EMAX Avan Scimitar 5x3x3 Tri-Blade 5" Prop (2 CW, 2 CCW)

Read more less

Replacement props for the EMAX BabyHawk R Pro 4" or any other high performance 4" build.  Be sure to check out all our 4" props, and all our EMAX gear! Specifications Diameter: 4" Pitch: 2.8" Blades: 3 Material: Polycarbonate Weight: 3g Includes 4x EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop (2 CW, 2 CCW)

Read more less

EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear!  The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props.   The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight.  A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05  grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable.     The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.   A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. Be sure to check out all our 3" props, and all our EMAX gear! Specifications 3 inch diameter 2.4 inch pitch 3 blades Weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2 Includes 12x EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop (6CW, 6CCW)

Read more less

Emax has entered the world of Express LRS products with its Aeris Link module. Available in both 915MHz or 2.4GHz for the best range and penetration! This module also features tons of output power and external power options, Choose Emax to feel confident in the skies using ELRS!  Check out all our ExpressLRS compatible gear, and our Emax Products! Features 1000mW for 2.4GHZ ELRS  RGB fan displays battery level OLED screen and joystick or LUA script friendly 2-5S operational voltages Specifications Module Bay Input Voltage: 5-12V OLED Screen size: 1.29 " (Full size only) OLED Screen resolution: 64 x 128 (Full size only) Operating frequency: 2.4GHz ISM / 915MHz FCC Output power: 10mW/25mW/50mW/100mW/250mW/500mW/1000mW Refresh rate: 50Hz/100Hz/150Hz/250Hz/500Hz Antennas: Moxon Directional Antenna (2.4GHz), RP-SMA connection Configuration: Support signals of Crossfire Serial Data Protocol (CRSF) and OpenTX remote control Interface: Type-C, JR interface External Power: XT30 supporting 5-21V (2-5S) voltage input, 2S (8.4V) is recommended Includes 1x Emax Aeris Link ELRS 2.4GHz Transmitter Module

Read more less

Emax has entered the world of Express LRS products with its Aeris Link module. Available in both 915MHz and 2.4GHz for the best range and penetration! This module also features tons of output power and external power options, Choose Emax to feel confident in the skies using ELRS!  Check out all our ExpressLRS compatible gear, and our Emax Products! Features 1000mW+ for 915MHz ELRS  RGB fan displays battery level OLED screen and joystick or LUA script friendly 2-5S operational voltages Specifications Module Bay Input Voltage: 5-12V OLED Screen size: 1.29 " (Full size only) OLED Screen resolution: 64 x 128 (Full size only) Operating frequency: 2.4GHz ISM / 915MHz FCC Output power: 10mW/25mW/50mW/100mW/250mW/500mW/1000mW+ Refresh rate: 50Hz/100Hz/150Hz/250Hz/500Hz Antennas: Moxon Directional Antenna (2.4GHz), RP-SMA connection Configuration: Support signals of Crossfire Serial Data Protocol (CRSF) and OpenTX remote control Interface: Type-C, JR interface External Power: XT30 supporting 5-21V (2-5S) voltage input, 2S (8.4V) is recommended Includes 1x Emax Aeris Link ELRS 900MHz Transmitter Module

Read more less

Spare replacement motor for the EMAX Tiny Hawk II. Tinyhawk II 0802 Brushless motor was updated from the original 08025 to be lighter weight and give greater performance. Giving the Tinyhawk II more control and lighter overall weight. This resulted in better flight characteristics and a more efficient system, while also giving better flight times by 20% depending on flight feel and use.  This motor has a plug Check out all our TinyHawk parts, and EMAX gear! Includes 1x EMAX 0802 16000Kv Micro Motor w/ Plug

Read more less

All batteries must be shipped by a ground shipping method. New Packaging! After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector. BT2.0 Connector - the most significant revolution in 1S Whoop Drone. We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!  Check out all our 1S batteries and our BetaFPV selection! Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0 Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. BETAFPV always keeps moving forward with passion for breakthrough experiences. After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector. Features BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector. By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.  BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery. It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to BT2.0 connector. Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power.  High-end technology to guarantee high quality and consistent performance. We released BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester & charger for your need. Specifications Capacity: 450mAh Rate: 30C/60C Voltage: 4.35V Dimension: 61x15x7.5mm Connector: Betafpv BT2.0 connector  Weight: 12.7g(1pcs) Includes 4x BT2.0 450mAh 1S 30C Battery BT2.0 CONNECTOR There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.

Read more less

All batteries must be shipped by a ground shipping method. Updated packaging. BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high-quality solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demands. BETAFPV always keeps moving forward with a passion for breakthrough experiences.After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusively designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!  Check out all our 1S batteries and all our BetaFPV gear Features BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector. BT2.0 300mAh 1S 30C Battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. With this BT2.0 300mAh 1S battery, all 1S brushless drones will gain powerful and perfect performance. By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings. Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power. You can get a 2mins flight time in full throttle on Meteor65. Specifications Item: 1S battery Capacity: 300mAh Rate: 30C/60C Voltage: 4.35V Dimension: 67.3x11.8x6.1mm Connector: Betafpv BT2.0 connector  Weight: 8.28g(1pcs) BT2.0 Connector There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 260mAh battery. The discharge current is 9A in this testing. You could see that it has longer discharge time and improvement in voltage sag with BT2.0 connector, which brings better flight performance. Here is Betafpv Lab video to show you the best way to replace PH2.0 to BT2.0 connectors. Includes 8x BT2.0 300mAh 1S 30C Battery

Read more less