SPMXSE1160, Spektrum RC Firma 160 Amp Brushless Smart ESC
Spektrum Firma 160 Amp Brushless Smart ESC. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity.
Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!
Features:
Smart all-in-one telemetry
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Adjustable high-power BEC
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Specifications:
Forward: Y
Reverse: Y
Brake: Y
Time Delay Brake: Y
Continuous Maximum Current: 160A (1050A Max Burst)
Input Voltage: 11.1 - 29.6V
Input Connector Types: IC5
Output Connector Types: Female 6.5 Bullets
Length: 70
Width: 77
Height: 44
Weight: 280g
BEC Voltage: 6V / 8.4V
Includes:
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum Smart sticker sheet
(1) Product Manual
This product was added to our catalog on October 23, 2021
Seal Series ESC: 300A OPTO 6s-14s
Product Item
SEAL 300A OPTO HV 14S
Model Number
6300400
Form
Brushed / Brushless
Brushless
HV / Normal
HV
Hardware Parameters
Continuous Current (A)
300A
Burst Current(A)
1000A
Battery Cell (NiXX/Lipo)
18-42 NC/6-14 Lipo
BEC output
/
Dimensions
Length
84mm
Width
146mm
Height
28.6mm
Weight
640g
Wire & Plug
Power Wire
8＃AWG，160mm-Red/160mm-Black
Motor Wire
8＃AWG，160mm-Black
Signal Wire 1
(Brown/Red/Orange)60C，add a special JR male connector at the end of 330mm wire
Signal Wire 2
(Brown/Red/Orange)30C，add a special JR male connector at the end of 150mm wire
Power Plug (Yes/No)
no
Parameter programming
Transmitter
yes
Jumper programming card
LCD programming card
yes
WiFi programming card
yes
USB adapter
yes
Firmware
Upgrade Firmware online(Yes/No)
yes
Default
Brake Type: Brake OffBattery Type: LiPo with Automatic Cell detectiveCut Off Voltage Threshold: 3.0V/60%Motor Timing: AutoMotor Rotation: ForwardStart Up Strength: 30%Low Voltage Cut Off Type: Reduce Power
18-42 NC/6-14 Lipo
EFLAEC509, E-flite EC5 to EC3 Connector Adapter (12AWG) (EC5 Male to EC3 Female)
This is an E-Flite 1.5" Long 12Awg EC5 To EC3 Adapter, intended to adapt a battery with an EC5 connector to a device with an EC3 connector. This is also a great way to charge your EC5 equipped battery with an EC3 Charge Lead.
For the reverse adapter, see part DYNC0030.
This product was added to our catalog on November 15, 2019
DYNC0143, Dynamite 14AWG XT60 Charge Lead Cable 14AWG XT60 Charge Lead Cable
This is a Dynamite XT60 Charge Cable, built with 14AWG wiring. Features 4mm banana style bullet connectors for compatibility with most battery chargers.
This product was added to our catalog on October 28, 2022
TRA3383, Traxxas BL-2s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
The water-resistant BL-2s speed controller offers the advantages of brushless technology while incorporating the expected safety and convenience features from Traxxas. With built-in low-voltage detection, thermal shutdown protection, and EZ-Set one-button programming, the BL-2s ensures reliability and user-friendly operation.
Features:
Perfect upgrade for your stock Brushed Traxxas!
Built-in two-stage low voltage and thermal detection
Patented Training Mode reduces the power output by 50% for new or younger drivers
EZ-Set one-button setup operates and programs
Three driving profiles Sport, race and Training mode
Specifications:
Scale: 1/10
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensorless
Waterproof: Yes
Current:
Input Voltage: 2S LiPo (7.4V MAX)
BEC Output: 6V
Output Connectors: Traxxas Quick Connect
Dimensions: 2.3x1.5x1.2" (59x39x31mm)
Weight: 3.06oz (87g)
Includes:
(1) Traxxas BL-2s Brushless ESC
This product was added to our catalog on September 15, 2023
HWA38020323, Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo (25.5T)
The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 25.5T motor is an ideal choice for vintage trans am, formula and other on-road racing classes. These two components paired together make for an ideal choice for beginners and experts alike. Features:
ESC:
Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
Programmable via OTA Wireless module or 3in1 program box
Built-in capacitor module eliminates the need for external capacitors and unwanted space
RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
Supports both CCW (counterclockwise) and CW (clockwise) motor directions
Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
Supports ESC firmware upgrades
User-friendly and convenient for set-up
Motor:
Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
This Justock motor is applicable to various 1/10th, 1/12th on-road Stock Spec Racing, ICC, IOCC, USVTA, TOUR, Oval racing. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:
ESC:
Continuous Current: 60A
Burst Current: 380A
Battery: 2S Lipo (Only 2S)
Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
ESC programming: Independent programming port
Motor Supported: Sensor and sensorless brushless motor
Motor Limit: 10.5T, or greater, 3650 Motor
Application: 1/10, 1/12 On-road and Off-road
Cooling Fan: Powered by BEC
Size: 40.9x33.9x32.1mm (LxWxH)
Weight: 75.4g (Including weight of wire)
Motor:
Scale: 1/10, 1/12
Brushless: Yes
Sensored: Yes
Pole Count: 2
KV Rating: 1600
LiPo Cells: 2-3S
No-Load Current(A): 2.8
Outer Diameter: 35.9mm (1.413")
Length: 52.5mm (2.067")
Shaft Diameter: 3.17mm (0.125")
Weight: 173g (6.10oz)
Timing: Fixed
Includes:
(1) Justock G3 ESC
(1) Justock 25.5t G2.1 brushless motor
(1) 5V cooling fan
(1) Sensor cable
This product was added to our catalog on October 20, 2023
SAVSC1251MGP, Savox SC-1251MGP Low Profile Digital "High Speed" Metal Gear Servo
The SC-1251MGP is a high speed, low profile servo which combines leading edge technology with metal gear train to make an ideal option when space or weight is a concern.NOTE: "Plus" series servos feature Soft Start and Sanwa SSR compatibility.
Features:
Metal gear train ensures durability under harsh situations.
Ideal for 1/10 on road vehicles. (servo saver recommended)
Aluminum case provides cooler operating temperatures.
Specifications:
Torque:
@4.8v: 7.0kg/97.2oz-in
@6.0v: 9.0kg/125.0oz-in
Speed:
@4.8v: 0.10 sec/60 deg
@6.0v 0.09 sec/60 deg
Dimensions (LxWxH) 40.8 x 20.2 x 25.4
Weight: 44.5g
Includes:
(1) SC-1251MGP Low Profile Digital "High Speed" Metal Gear Servo
(1) Plastic Servo Arms and Hardware
This product was added to our catalog on March 23, 2023
CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC
The Castle Creations Mamba Monster X 8S 1/6 Brushless ESC features CRYO-DRIVE™ - Castle’s latest break-through technology. CRYO-DRIVE minimizes the amount of time the ESC’s electrical components spend generating heat. This proprietary software advancement works in parallel with a unique open housing design and a forged elliptical fin heatsink to allow increased directional airflow to cool critical components. Combine this with a high speed 40mm fan and you have a design that maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling.
Mamba Monster X 8S is designed for 1/6 scale vehicles weighing up to 25 lbs. with up to 8S LiPo.
Compatible models include the Traxxas X-Maxx & Unlimited Desert Racer; Arrma Kraton 8s & Limitless; Losi Super Rock Rey & Audi R8; Redcat Shredder.
Features:
Input voltage range 2S-8S LiPo
Sensored, Sensorless and SmartSense™ running modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
Premium forged heatsink with elliptical fins for superior airflow and increased heat dissipation
Oversized factory equipped thermally controlled 40mm fan ? Waterproof design for all weather conditions
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer
Data-logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for “on the-fly” adjustments using your transmitter
Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff
Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1 year warranty
Specifications:
Application guidelines: 1:6 scale RC hobby vehicles weighing up to 25 lbs
Running Modes: Sensored, Sensorless and SmartSense™ (when paired with a Castle 4-POLE 12SLOT sensored motor)
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V
Operating environment: Waterproof design enables use in nearly any environment
Brake: Proportional
Reversible: Yes, but may be disabled for racing
On /off switch: Yes, waterproof
Cooling fan: Yes, factory equipped (40mm), fully removable (See Product Use Statements for more info)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (w/wires): 5.75 oz. (163 grams)
Connector type: 6.5mm female bullets for motor connection
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
This product was added to our catalog on May 14, 2021
HADMCL4220, ESC Wireless Link
The Maclan Racing Wireless Link is designed for transmitting data wirelessly between Maclan Racing ESC and mobile devices (Android OS with 5.0 or later, and iOS with 13 or later). With Maclan Racing Smart Link App, it allows ESC programming, firmware updating, and viewing data logs.
Specifications
Interface: micro USB connectorWiFi Protocol: IEEE802.11 b/g/nDimensions: 26x26x10mmWeight: 9g (with 10cm lead and micro USB connector)Supported OS: Android OS 5.0 or later, Apple iOS 13 or later
SPMXSE1150, Spektrum RC Firma 150 Amp Brushless Smart ESC
Spektrum Firma 150 Amp Brushless Smart ESC. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity.
Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!
Features:
Smart all-in-one telemetry
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Adjustable high-power BEC
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Includes:
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum Smart sticker sheet
(1) Product Manual
Specifications:
Forward: Y
Reverse: Y
Brake: Y
Time Delay Brake: Y
Continuous Maximum Current: 150A (950A Max Burst)
Input Voltage: 11.1 - 22.2V
Input Connector Types: IC5
Output Connector Types: 6.5 Female Bullet
Length: 58mm (2.3in)
Width: Case = 47.5mm (1.9in) W/ Tabs = 59.5mm (2.3in)
Height: 38.5mm (1.5in)
Weight: 238g (8.4 oz)
BEC Voltage: 6V (5A)
This product was added to our catalog on March 12, 2021
CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV)
The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 2028 Sensored Motor is a great way to take your build to the next level with Castle’s cutting edge sensored large scale brushless power. The MAMBA MONSTER X 8S COMBO is ready to power any R/C vehicle weighing up to 25lbs, and running all the way up to 8S LiPo. This motor and ESC combo is designed for heavy, high speed rigs, and you'll experience smooth low-end control, without sacrificing power, punch, or speed.
The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology, CRYO-DRIVE. By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level.
The ESC was designed with a robust aluminum casing, and the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a beast, ready to take on the harshest of environments and still perform. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.
When paired with the Castle sensored 2028-800KV motor, users with heavy, high power rigs will experience controllable low-end control without sacrificing power, punch or speed. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs.
NOTE: This is not a direct replacement to the Mamba XLX. The XLX still handles rawer full throttle power in the most extreme setups.
Features:
ESC:
Input Voltage Range 2S-8S LiPo
Sensorless, Sensored and SmartSense™ Running Modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
Oversized factory equipped thermally controlled 40MM cooling fan
Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
Waterproof design for all weather conditions
Data logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
Motor:
The 2028 Extreme can easily run in the 10 horsepower range (Burst power output for duration's typical of vehicle acceleration.)
Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode.
High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions.
Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible.
Proprietary winding techniques allow Castle Creations to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor.
Dual sensor ports to ensure optimal installation in your large-scale vehicle.
Updated modern and sleek design that looks as cool as it performs.
Specifications:
ESC:
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (40MM), fully removable** (See Product Use Statements below)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (with no battery connector): 5.75 oz. (163 grams)
Connectors: 6.5mm female bullets for motor connection
Motor:
Input Voltage Range: 12S MAX
Kv: 800
Max. RPM: 45,000
Minimum Input Voltage: 3S
Maximum Input Voltage: 12S
Sensored Capable: Yes
Can Length: 4.4" (113.2mm)
Can Diameter: 2.2" (57mm)
Weight (w/wires): 44 oz./1.25kg
Shaft Size: Length: 30mm
Diameter: 8mm
Mounting Hole Specifications: 4mm holes @ 30mm spacing.
Cooling Fan: Available, but not included. See 011-0019-00 here.
Connectors: 8.0mm male connectors
Recommended ESC: Mamba XL X
Running modes: Sensorless and Sensored
Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 25lbs. 2WD vehicles weighing less than 30lbs.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. Castle recommends using 50C continuous discharge or higher LiPo batteries.
Surge ratings should never be used to determine a pack’s suitability for a brushless application.
Castle recommends a high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors.
Applying voltages higher than 33.6V will cause irreparable damage to ESC.
Although Mamba Monster X 8S is waterproof, it is NOT intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt.
The cooling fan must be removed prior to driving in wet conditions. *Fan is not waterproof.
Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the motor or ESC.
The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the Running & Maintaining document in the resources tab above for info on running and maintaining motors in wet environments.
Application Guidelines: Mamba Monster X 8S and 2028-800Kv motor is intended for use in 1:6 scale vehicles weighing up to 25 lbs. and up to 8S LiPo. Vehicle Examples: Traxxas™ X-Maxx & Unlimited Desert Racer; Arrma™ Kraton 8s & Limitless; Losi™ Super Rock Rey & Audi R8; Redcat™ Shredder (optional motor mount and modifications may be necessary to install motor).
Includes:
Mamba Monster X 8S ESC
4-POLE Sensored 2028-800KV Motor
Castle Sensor Harness Adapter (installed)
250mm Sensor Wire
Mamba Decals
Coupon for free Castle Link USB
ESC Quick Start Guide
Motor Quick Start Guide
This product was added to our catalog on April 4, 2021
SPMX52S50H3, Spektrum RC 2S Smart LiPo 50C Hard Case Battery Pack (7.4V/5000mAh) w/IC3 Connector
The Spektrum RC 2S Smart LiPo 50C Hard Case Battery Pack with IC3 Connector provides pilots and drivers with an array of Smart benefits; Not only are charging parameters and performance data stored and uploaded automatically to Smart chargers, but no balance lead is needed — just one easy IC connection.
Smart G2 batteries come from the factory programmed to discharge automatically to a safe storage voltage of 3.90V after 72 hours of inactivity. The benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. You can change the battery's Auto Storage settings based on your own preferences. G2 batteries also offer a storage discharge rate that's three times faster than the previous G1 Smart batteries.
Enjoy the Smart Battery advantage of not having to set your own charging preferences. When a Smart G2 LiPo battery is connected to a Spektrum Smart charger, its unique charging parameters and health information upload to the charger from the battery's integrated memory microchip. Through the charger you can view and set preferences such as charge rates, so all that's required to charge the pack is connecting it to your Smart charger. That's the Smart Battery Advantage!
Note: G2 batteries require the use of a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 update.
Features:Simpler and safer to useBalance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead requiredFaster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performanceThicker internal metal side plates protect cells and improve heat dissipationIntegrated microchip stores unique parameters for each batteryIC3® and IC5® connectors are also compatible with EC3™ and EC5™ stylesSpecifications:Battery Type: LiPo (3.7V per cell)Charge Protection Circuitry: YesConnector Type: IC3Maximum Charge Rate: 5CBattery Capacity: 5000-5999mAhWatt Hours: 37Maximum Burst Discharge Rate: 50CProduct Height: 0.98" (25mm)Application: SurfaceBattery Voltage: 7.4VBattery Balance Connector: G2 SmartCapacity: 5000mAhHard Case: YesNormal/Standard Charge Current: 5ANumber of Cells: 2Product Weight: 10.58oz (300g)Wire Gauge: 12 AWGNormal/Standard Charge Rate: 1CProduct Length: 5.45" (138 mm)Product Width: 1.8" (46 mm)
This product was added to our catalog on July 31, 2024
RER31529, Spur Gear Adapter (Aluminum)(1pc)
Spur Gear Adapter (Aluminum)(1pc)
Lightweight spur gear adapter that allows use of aftermarket spur gears.
This product was added to our catalog on March 13, 2024
TRA2080R, Traxxas Servo, Micro, Waterproof
The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience.
This product was added to our catalog on Febuary 1, 2024
SPMXSE1120, Spektrum RC Firma 4S 120 Amp Brushless Smart ESC
The Spektrum Firma 4S 120 Amp Brushless Smart ESC combines "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity.
Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!
Features:
Smart all-in-one telemetry
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
Ideal for 1/8th scale surface applications running on 4s Lipo setups
High current adjustable BEC (6v or 7.4v @ 4 Amps)
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Adjustable high-power BEC
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Specifications:
Auto Cutoff: Yes
Battery Type: LiPo (3.7V per cell)
BEC Continuous Current: 4A
BEC Voltage: 6 and 7V selectable
Brakes: Yes
Connector Type: IC5
Drive Type: Forward/Brake/Reverse
Input Voltage: 6.0V - 14.4V (2-4S LiPo, 5-12 cell NiMH)
Low-Voltage Cutoff Programmable: Yes
Maximum Burst Current: 830A
Maximum Continuous Current: 120A
Motor Connector: 4mm Female Bullet
Overload Protection: Yes
Product Height: 1.33" (34 mm)
Product Length: 1.7" (43 mm)
Product Weight: 0.337lbs (153g)
Product Width: 1.53" (39 mm)
Programmable: Yes
Reverse: Yes
Technology: Smart
Time Delay Brake: Yes
Water-Resistant: Yes
Includes:
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum Smart sticker sheet
(1) Product Manual
Needed to Complete:
Spektrum™ Surface Receiver
Spektrum Smart Technology LiPo Battery
Spektrum Transmitter
This product was added to our catalog on January 20,2024
TRA2280, Traxxas Servo, digital high-torque 600 brushless, metal gear
Servo, digital high-torque 600 brushless, metal gear (ball bearing), waterproof
High Torque: 600 oz-in
87% more torque than stock Sledge servo
5X more torque for TRX-4
with 2262 external BEC
High Speed: 0.13 sec/60°
Twice as fast as stock Sledge
Full Aluminum Heat Sink Case
Full Steel Gears with steel output
Brushless motor technology
Waterproof
Dual ball bearings
Factory fit for drop-in installation into 1/10 scale Traxxas models*
This product was added to our catalog on May 7, 2021
HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth)
The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control.
Hobbywing FFD:
A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs.
PWM Adjustments:
From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition.
Internal BEC:
The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos.
NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended.
Features:
32 Bit, M4 microprocessor for ultimate performance
Frameless fan design for extreme cooling
Reverse polarity protection
Precise adjustments to throttle and brake PWM
Optimized programmable parameters
Extended brake force
Drag Brake Acceleration and Softening Function
High output BEC
Specifications:
Wire gauge: 13 AWG Lightweight Ultra-flex
Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1
Continuous Current: 160A
Peak Current: 1200A
Input Voltage: 2S LiPo / 4-6S Cell NiMH
BEC Output: BEC voltage of 5-7.4V
Programming device: LCD Program Box / OTA Programmer
Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android)
Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud)
Weight: 88g (with wires)
Motor spec recommendation:
Touring Car: >4.5T
Buggy: >5.5T
Includes:
(1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC
(1) Cooling Fan
(1) Capacitors
Decals
Accessory package
This product was added to our catalog on December 14, 2023
TRA3384, Traxxas BL-2s Brushless Motor (3300kV)
Traxxas BL-2s Brushless Motor. This replacement motor is intended for the Traxxas Rustler 4x4, Slash, and Slash 4x4. This motor is designed to deliver brutal 2S power and speeds. The built in cooling fan combined with low-friction bearings ensure long lasting, efficient performance. The motor connection features a quick, single connector for easy setups with the BL-2s ESC. Package includes one brushless motor.
NOTE: This motor is only designed for 2S use with the BL-2s ESC.
This product was added to our catalog on September 15, 2023
YOKBL-WMB, Yokomo WiFi Brushless ESC Speed Control Programmer
This is the Yokomo WiFi Brushless ESC Speed Control Programmer. A Wi-Fi module makes Yokomo‘s latest BL-PRO4 / RS4 / SP4 ESC series more easily programmable! Connect the WiFi Module to the ESC programmer connection connector, perform Wi-Fi connection with the smartphone, and rewrite the ESC with the application installed on the smartphone. If you leave the BL-WM on the machine, you can change the setting at any time as long as the motor is not rotating.
Of course, because it is a wireless connection, even while driving on a circuit, you can stop using the pit road once and rewrite the setting directly from the control panel. In addition, since it has a telemetry function that can check live current / voltage value and rotation speed while driving, mechanics can also monitor the driving situation on the course side. Since traveling data is stored as a log, it can be used as information to set a better program by checking after running.
Specifications:Compatible ESCs: BL-PRO4 (N/B), BL-RS4, BL-SP4Case size: 25×25×9mmWeight: Approx 7g*WiFi connection may be interrupted depending on usage environment. Please note.*It may be prohibited by your local race rules to install the Wi-Fi module while driving; please follow your local circuit rules.
This product was added to our catalog on October 26, 2023
HWA38020334, Hobbywing XR10 Pro G2S Sensored Brushless ESC/V10 G4 Motor Combo (13.5T)
This is the Hobbywing XR10 Pro G2S Sensored Brushless ESC/V10 G4 Motor Combo. Using the precise control of the XR10 Pro G2S combined with a powerful V10 G4 motor gives the user a dominant combo!
XR10 Pro G2S 160A ESC:
The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC offers all the tuning options needed for competitive racing while giving reliable performance on the track. Helping to keep this ESC reliable is the Frameless Fan Design (FFD) fan system. A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs. At the racetrack ESC adjustments can be crucial. The XR10 Pro G2S is packed with features such as several PWM adjustments. From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition.V10 G4 Motor:
The V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended.
Features:
ESC:
Upgraded 32-bit M4 microprocessor with more powerful processing capability guarantees stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4)
Peak current up to 1200A. (This is not a typo)
Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
Variable frequency regulation of PWM & amp; brake frequencies allows users to precisely regulate the driving; braking forces (of the motors).
Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%.
Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency.
10 select-to-use profiles applicable to all 1/10th RC car racing.
Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations.
Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC.
With the Updated WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices.
Switchable motor direction (CCW/CW) for various chassis.
Multiple protections comes in standard
Low-voltage cutoff protection
ESC and motor thermal protection
Fail safe (throttle signal loss protection)
Reverse polarity protection
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
Firmware upgrade via Hobbywing multi-function LCD program box or WiFi Express (item sold separately).
Motor:
Specially designed for high-level racing.
Lightweight: The G4 Modified & Stock motors only weigh 161g & 132g respectively.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G4 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat (200°C) resistant wire, heat (200°C) resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
Specifications:
ESC:
Cont./Peak Current: 160A / Burst: 1200A
Battery: 5-6 cells NiMH/NiCd / 2S LiPo
BEC Output: 5V-7.4V
Motor Supported: Sensored and sensorless brushless motors
Suitable Motor: 3650 Motors 1/10th Touring Car: 4.5T, 1/10th Buggy: 5.5T
Application: Brushless motor system for 1/10th, 1/12th Touring Cars & Buggies Racing, Splash proof
Wires: Standard 13AWG 200mm
Size: 37.5X30.9X32.5mm
Weight: 90g (with wires)
Motor:
kV Rating: 3950kV
Cell Count: 2-3S
No-Load Current: 4.5A
Outer Diameter: 35.8mm
Length: 51.4mm
Shaft Diameter: 3.175
Weight: 149g
Front Bearing: 9x4x4mm
Rear Bearing: 8x3x4mm
Adjustable Timing: 30-60°
Applications: 1/10th Stock Class Racing
This product was added to our catalog on July 20, 2022
HWA38010602, Hobbywing EZRun MAX5 G2 Sensored Brushless ESC & Motor Combo w/56118SD (800kV)
The EZRun MAX5 G2 Sensored Brushless ESC and Motor Combo is a must have for your large scale needs. The Max5 G2 ESC is stacked with fancy features such as the Freewheeling Technology which increases driving efficiency and will in turn lower operating temperatures. The ESC acquired an IP-67 waterproofing rating and high voltage handling capabilities of 44.4V, this combo will have enough power to send your rig to the next ZIP code, the Hobbywing Max5 combo is everything you want and more.
Features:
MAX5 G2 ESC
Enhanced Performance
Intelligent Freewheeling Technology
Turbo Timing Technology
56118SD G2 Motor
4-pole rotor design for more torque with strong explosive force
Detachable motor design for easy maintenance
Waterproof sensor interface
Explosion proof rotors
Spiral CNC shell
Specifications:
ESC:
Scale: 1/5th
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensored
Waterproof: IP-67
Current:
Continuous: 250A
Peak: 1,600A
Input Voltage: 6-12S LiPo
BEC Output: 6V-8.4V
Output Connectors: 8mm Bullet
Dimensions: 3.7x2.3x2.0" (94.5x59.4x50.9mm)
Weight: 15.1oz (428.5g)
Motor:
Input Voltage: 8-12S LiPo
KV: 800kV
Pole: 4
Motor Diameter: 2.20" (56mm)
Motor Length: 4.69" (119.2mm)
Shaft Diameter: 0.31" (8mm)
Shaft Length: 1.18" (30mm)
Front Bearing size: D22*D8*T7
Rear Bearing size: D19*D5*T6
Weight: 45oz (1277g)
Includes:
(1) EZRun MAX5 G2 1/5 Scale Waterproof Brushless ESC
(1) EZRUN 56118SD G2 4-Pole 1/5 Scale Sensored Brushless Motor
YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller
The Yokomo RPX-II Drift Spec Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences.
This "Drift Spec" ESC is best suited for 2wd and 4wd 1/10 drift platforms and has been specifically tuned for drifting applications. Smooth throttle control and a multitude of power adjustments makes this ESC one of the best drift oriented options.
Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-RPXP2), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WMA).
Features:
Dedicated sensored brushless controller
Programmable with YOKBL-WMA Wi-Fi module or YOKBL-RPXP2 Programmer
49 Individual ESC programming parameters
A multitude of boost and turbo adjustments
Advanced brake adjustments
Full aluminum case with cooling vent & high power 30mm cooling fan
Specifications:
Motor Type: Sensored Brushless
Motor Limit: 3.0T (specification when using the fan)
Operating Voltage: 3.7-7.4V
Forward/Brake/Reverse: Yes
Full Aluminum Case/Heatsink: Yes
Typ. Voltage Drop @20A per Phase: 0.048V
Rated Current per Phase: 249A
Plugged 30x30x10mm Fan: optional
BEC Output: 6V/7.4V 6A Linear Continuous Current
BEC Output Short Protection: Yes
"Boost 0" Mode: Yes
Multi-frequency system: Yes
Power Wires: 12 AWG
Case Size: 32.9x34.6x19.6mm (without fan)
Weight: 44g (without cables and fan)
This product was added to our catalog on September 5, 2023
HWA30110000B05, QUICRUN WP 16BL30 COMBO (Bundled) - ESC + QR2435 motor G3 (6500kv) + Programmer
ESC + Quicrun 2435 brushless motor 6500kv + LED program box
Waterproof, Sensorless system
ESC
Waterproof and dustproof for all-weather.
One-button (the “SET” button on the ESC) sets the ESC. All parameters easily reset to factory default settings.
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit different kinds of models, tires and tracks.
Multiple protections: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection / Motor lock-up protection.
Motor
Cont./Peak Current: 65Ax4/80Ax4
Input Voltage: 2-3S Lipo/6-9 Cell NiMH
BEC Output: 5V&0.6A
Size: 55x42x6.6mm
Weight: 15g
This product was added to our catalog on May 3, 2023
SAVSC0254MGP, Standard Digital Servo with Soft Start, 0.14sec / 100oz @ 6V
The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque."Plus" series servos feature Soft Start and Sanwa SSR compatibility.
Features:
Metal gear train ensures durability under harsh situations.
Higher torque output than standard servos.
Ideal for 30-60 size aircraft, and some car appliations.
Specifications:
Torque @ 4.8v - 6.9kg/86.1oz-in
Torque @ 6v - 7.2kg/100.0oz-in
Speed @ 4.8v - 0.19 sec/60 deg
Speed @ 6v - 0.14 sec/60 deg
Dimensions L x W x H (mm): 40.7 x 19.6 x 39.4
Weight: 49.0g
Technical Details
Operating Temperature: 14° - 122°F (-10° - 50°C)
Running Current (no load): 220mA @4.8V, 240mA @6.0V
Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V
Idle Current: 6mA @4.8V, 6mA @6.0V
Wire Length: 300 +/- 5mm
Output Gear Spline: 25 Tooth
Bearings: 2BB
Operating Travel: 120° (1000 → 2000 µ second)
Neutral Position: 1500 µ second
Pulse Width Range: 800 → 2200 µ second
Maximum Travel: Appx 164° (800 → 2200 µ second)
Refresh Rate: 240 Hz
Motor Type: Brushed
This product was added to our catalog on May 15, 2023
SAVSC0252MGP, Savox SC-0252MGP Standard Metal Gear Digital Servo
The Savox SC-0252MGP is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque.
NOTE: "Plus" models feature Soft Start and Sanwa SSR Compatibility
Features:
Metal gear train ensures durability under harsh situations.
Higher torque output than standard servos.
Ideal for 30-60 size aircraft, and some car appliations.
Specifications:
Torque:
@4.8v: 7.2kg/100.0oz-in
@6.0v: 10.5kg/145.8oz-in
Speed:
@4.8v: 0.23 sec/60 deg
@6.0v 0.19 sec/60 deg
Dimensions (LxWxH) 40.7x19.6x39.4mm
Weight: 49.0g
Includes:
(1) SC-0252MGP Standard Digital Metal Gear Servo
Plastic Servo Arms and Hardware
This product was added to our catalog on May 15, 2023
SAVSB2291SG, Savox SB-2291SG Black Edition Monster Speed Brushless Steel Gear Servo (High Voltage)
The Savox SB-2291SG Black Edition Monster Speed Brushless Steel Gear Servo delivers an impressively quick 0.05 second transit time while producing above-average torque for specific applications where response time is the primary concern. Models like 1/8 on-road cars, 1/10 nitro touring and even 1/8 EP and GP buggies can improve performance with a more responsive servo-and the SB2291SG fills the need perfectly. Features Savox' patented brushless servo motor technology that provides up to 35% more power than motors in competing brands, while smoothness and reliability are optimized through the use of three precision ball bearings.
Features:
Full Aluminum Case
3 Precision Ball Bearings
Unique steel gears
Specifications:
Torque @ 7.4v: 18.0 kg/250 oz./inSpeed @ 7.4v: 0.05 sec/60 degDimensions L x W x H (mm): 40.3 x 20.2 x 38.7Weight: 79g / 3.1oz
This product was added to our catalog on March 23, 2023
SAVSB2262SG, Savox SB-2262SG "High Torque" Low Profile Brushless Steel Gear Digital Servo (High Voltage)
Savox SB-2262SG "High Torque" Low Profile Brushless Steel Gear Digital Servo. This servo comes from Savox's Monster series and feature an aluminum case and unique brushless motor to supply monster power. Package includes one low profile servo, three servo horns and mounting hardware.Features:
Full Aluminum Case
2 Precision Ball Bearings
Metal Gears
Specifications:
Speed:
7.4V: 0.08 sec/60°
8.4V: 0.065 sec/60°
Torque:
7.4V: 347.2oz-in (25kg)
8.4V: 444.4oz-in (32kg)
Dimensions: 40.8x20.2x25.75mm
Weight: 62g
This product was added to our catalog on March 23, 2023
KYOFA540-41, Kyosho Mad Van VE Metal Ring Gear (41T)
Kyosho Mad Van VE Metal Ring Gear. This replacement ring gear is intended for the Kyosho Mad Van VE, however, it may also be used with the Mad Van (KYO34412T1). Package includes one ring gear.
This product was added to our catalog on July 06, 2023
