PTK-5071, ProTek RC QS8 Anti-Spark Connector (1 Male)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Male Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon
Flame retardant rating: UL94 V2
Temperature Range: -20C to +100C
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 35.9mm w/end capWidth:
Width: 29.5mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Male Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
PTK-5041, ProTek RC Sheathed T-Style (Deans) Plug (1 Male/1 Female)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes one male plug, one female plug and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on March 16, 2021
DYNC0030, Dynamite EC5 to EC3 Connector Adapter (EC5 Female to EC3 Male)
This is a Dynamite EC5 Female to EC3 Male connector adapter. It adapts an EC5 device to accept an EC3 battery.
For the reverse adapter, see part EFLAEC509.
This product was added to our catalog on March 13, 2021
SPMXCA505, Spektrum RC IC5 4" Battery Connector
This is a Spektrum IC5 4" Battery Connector. This connector uses a Female IC5 plug and 10AWG, 4" long wire.
This product was added to our catalog on March 31, 2021
SPMXCA501, Spektrum RC IC5 Battery Connector (2) (Female)
This is a pack of Spektrum IC5 Battery Connectors, including two female IC5 plugs.
This product was added to our catalog on March 31, 2021
SPMXCA317, Spektrum RC IC3 Battery Adaptor Plug (Device to Deans) (2)
The IC3 Battery Adaptor Plug from Device to Deans style adapter. These are used to convert IC3 or EC3 equipped batteries to be used with applications that require a Deans connector. Package includes two adapter plugs.
This product was added to our catalog on May 14, 2021
TRA3465, Traxxas Velineon VXL-4S Brushless Electronic Speed Control
Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck.
Specifications:
Input Voltage: 3S–4S LiPo (11.1V – 16.8V)
Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm)
Weight: 201g (7.09oz)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Motor Connectors: Traxxas 6.5mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
Power Wire: 10-gauge Maxx Cable
Ports: RX input, auxiliary fan, Traxxas accessory port
This product was added to our catalog on May 2, 2021
PTK-5059, ProTek RC EC2 Connector (1 Male/1 Female)
Protek R/C EC2 Connectors. Package includes one male, and one female connector housing, with male and female bullets.
This product was added to our catalog on December 16, 2021
SPMXCA303, Spektrum RC IC3 Device Connector (2) (Male)
Spektrum IC3 Device Connector Set, including two Male IC3 connectors.
This product was added to our catalog on December 31, 2021
MCL4115, Maclan XT90 Connector (3 Female/3 Male) (Yellow)
Maclan XT90 Connector Set. Package includes three male and three female XT90 Connectors.
Features:
Authentic XT90 connectors
This product was added to our catalog on April 30, 2021
2250 - Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
TRA2250, SERVO 330 HIGH TORQUE CORELESS
This product was added to our catalog on September 7, 2021
TRA8527, Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas dual-battery 25.2V ESC to run on a single 14.8V battery pack)
This product was added to our catalog on May 7, 2021
RCE1613, Racers Edge Battery/ESC Adapter: Female EC5 to Male XT90
The adapter allows the use of an XT90-equipped battery back in vehicles (such as ARRMA) with EC5 connectors on the ESC.
This product was added to our catalog on June 4, 2021
SPMXCA318, Spektrum RC 4" IC3 Battery to EC2 Device Charge Adapter
This Spektrum RC IC3 Battery to EC2 Device Adapter cable is used for connecting an IC3 Device such as Spektrum SMART Chargers, and connecting EC2 equipped batteries. Can also be used for ESC connections that use IC3 or EC3 ESC connectors to connect a battery with an EC2 connector.Specifications:
Overall length (end to end): 4.5"
Wire length: 3.25"
This product was added to our catalog on May 10, 2021
SPMXCA304, Spektrum RC IC3 6" Device Charge Lead w/4mm Bullets
Spektrum IC3 6" Device Charge Lead. Package includes one charge lead made with 13awg wire and 4mm bullets.
This product was added to our catalog on December 24, 2021
PTK-5201, ProTek RC T-Style Ultra Plug Male Device Pigtail (10cm, 14awg wire) (1)
This is a male T-style ultra plug pigtail from ProTek R/C. The ultra plug is connected to 10cm of 14awg silicone wire.
This product was added to our catalog on October 29, 2007
RCETM4GP, Traxxas Male Connector to 4.0mm Gold Plated Banana Plug with 14AWG Silica Gel Charge Cable
Connectors: compatible with Traxxas Male and 4.0 Banana Male
Wire Length: 30cm/11.8inch
Wire: 14awg Heatproof Soft Silicone Cable
Directly connect to your batteries compatible with Traxxas connectors, and to your charger with 4mm banana plugs
SPMXCA301, Spektrum RC IC3 Device & Battery Connector Set (1 Male & 1 Female)
This is the Spektrum IC3 Device & Battery Connector Set, including one IC3 Male end and one IC3 Female end.
This product was added to our catalog on March 31, 2021
HWI30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box
This Hobbywing Multifunction Gen2 LCD Professional Program Box is for programming Hobbywing brushless ESCs. The user friendly LCD interface makes ESC programming quick and easy. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. It is very compact, portable and applicable for field use.
NOTE: A external battery is needed for powering this program box when the ESC has no built-in/external BEC.
Features:
Works with Platinum, XeRun, EzRun, and Seaking series ESCs
Specifications:
Size: 91x51x17mm (LxWxH)
Weight: 65g
Input Voltage: 4.5V—12.6V
Interface: USB C
ESC interface: Futaba plug
Power supply interface: Futaba plug
This product was added to our catalog on June 4, 2021
ARA390301, Arrma Mega 570 Brushed Motor (9T)
Arrma Mega 570 Brushed Motor. This replacement motor is intended for the Arrma Infraction Mega 4x4. Package includes one pre-wired motor.
Features:
High-quality 9T 570 size brushed motor has a perfect balance of straight-line pace and low-speed torque
Cool ARRMA decal for eye-catching looks and easy motor recognition
Capable of running on 6-7 cell NiMh or 2S LiPo battery for great flexibility to suit your needs
Supplied fitted with 4mm male bullet connectors and 16awg wire
Internal fan to reduce running temperatures
Flux ring increases motor torque
Specifications:
Mounting Holes: M3 @ 25mm
Shaft Diameter: 3.175mm
Shaft Length: 17mm
Motor Diameter: 38.5mm
Motor Length: 65.0mm
Turns: 9
This product was added to our catalog on March 27, 2021
HWA30501003, Hobbywing LED Program Card
The Hobbywing LED Program Card is used to program Hobbywing ESC's. It features a user friendly interface and is easy to use. Package includes program box and 3-wire male/male plug for hooking the programmer to the ESC.
Compatible With:
Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.)
EzRun series
QuicRun series of brushless car ESCs
Quicrun 1080 & 880 brushed ESC
SeaKing series of brushless boat ESCs
Specifications:
Size: 88x58x14mm
Weight: 40g
Input Voltage: 4.8-6V
NOTE: If the ESC doesn't have a built-in BEC, you will need to use an additional 6.0V battery to supply power to the program box.
This product was added to our catalog on February 3, 2022
PTK-5213, ProTek RC Receiver Charge Lead (Futaba Female to 4mm Banana Plugs)
This is one receiver charge lead lead from ProTek R/C. This charge lead has a Futaba style battery connector on one end that will accept both Futaba and JR/Airtronics style battery connectors, connected to 4mm banana plugs with high quality 22awg silicone wire.This product was added to our catalog on July 6, 2021
PTK-160SS, ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160SS High Voltage Low Profile servo delivers an incredible 127 oz-in of torque and 0.05 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 152 oz-in and 0.04! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.05 transit speed, and 127 oz-in of torque @ 6.0V
0.04 transit speed, and 152 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160SS
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.05/60° sec
Operating Speed @ 7.4V
0.04/60° sec
Dynamic Torque @ 6.0V
127 oz-in (9.1 kg-cm)
Dynamic Torque @ 7.4V
152 oz-in (11 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on March 19, 2021
PTK-5072, ProTek RC QS8 Anti-Spark Connector (1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Composite
Flame retardant rating: UL94 V2
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 37.5mm w/end cap
Width: 28mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
TRA3370, Traxxas Velineon VXL-3M Waterproof 1/16 Scale Brushless Power System
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Mustang
Traxxas 1/16 Race Truck
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles.
The Velineon ESC simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs!
The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for big power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 380 delivers consistent, high-power output, run after run.
Velineon VXL-3m Features:
Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Wide range of battery options, including 6-12 cell NiMH or NiCad packs
The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3m is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode™ – 50% Fwd / Brake / 50% Rev
Multi-color LED provides clear feedback
Two-stage thermal shutdown protection protects the VXL-3m from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 (Ohm)).
Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance.
Velineon 380 Features:
Ultra high-temperature sintered Neodymium magnets provide
Massive torque and linear power
Optimized for power and efficiency in 1/16th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Precision-balanced rotor
8-Turn, 4000KV
Rebuildable
Hex hardware
Brilliant blue-anodized finish
Silicone steel laminations
Delivers more power than comparable brushed motors
VXL-3M Specifications:
Input Voltage: 6 to 12 cells NiMH, 2S to 3S LiPo
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 38 grams
Motors: Sensorless Brushless
Motor Limit: None
On Resistance: 0.0005 Ohms
PWM Frequency: 12,000Hz
Peak Current: 326A
Continuous Current: 52A
BEC Voltage: 6.0V DC
Motor / Battery Wiring: 16-Gauge Maxx® Cable
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-button setup: Yes, Traxxas EZ-Set®
Battery Input Connector: Traxxas High-Current Connector
Motor Connector: TRX 3.5mm Bullet Connectors
Velineon 380 Specifications:
Type: Sensorless Brushless
kV (RPM/Volt): 4000kV (8T)
Magnet Type: High Temp Sintered Neodymium
Connection Type: TRX 3.5mm Bullet
Wire Size: 16g Maxx Cable
Continuous Current: 25A
Max Current: 50A Burst
Max RPM: 50,000
Weight: 140g (4.94oz)
This product was added to our catalog on May 7, 2021
TRA3025, Traxxas XL-5HV 3S Waterproof Electronic Speed Control
This is the Traxxas XL-5HV 3S Waterproof Electronic Speed Control. HV stands for compatibility with the high voltage 3S LiPo battery packs for greater efficiency and power. In addition to the three standard profiles (Sport, Race and Training Mode), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. A new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate the trail with ease.
This product was added to our catalog on April 7, 2021
YEA-YA-0574BK, Yeah Racing Aluminum Clamping Servo Horn (Black) (25T)
Yeah Racing Aluminum Clamping Servo Horn. This optional servo horn is great for any RC model requiring a 25T servo horn. Package includes one clamping servo horn and one servo clamp screw.
Dimensions:
Hole Distance: 17mm, 19.5mm
Thread Diameter: 3mm
This product was added to our catalog on December 16, 2021
TRA1275, Traxxas Stinger 540 Electric Motor (20T)
This is a Traxxas 20 turn Stinger electric motor. The Stinger motor is a mild modified motor that gives you a good balance of speed and run time, depending on how you have your car set-up and what kind of batteries you are using.
A "20-turn" single (which is the designation of the Stinger motor), indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thicknesses of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, though, that a modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times.
This product was added to our catalog on May 7, 2021
SPMXCA509, Spektrum RC IC5 6" Battery Parallel Y-Harness Connector
This is a Spektrum IC5 6" Battery Parallel Y-Harness, featuring two male IC5 battery connectors wired in Parrallel to a female IC5 device connector. This harness allows you to use two batteries with one model.
This product was added to our catalog on December 31, 2021
TRA2275, Traxxas 2275 High Torque Metal Gear Waterproof Digital Servo
Traxxas 2275 High Torque Metal Gear Waterproof Digital Servo. This is a replacement servo intended for the Traxxas Sledge, however this will work as a strong upgrade servo for several other 1/10 and 1/8 scale vehicles. This servo features waterproof construction, high torque and durable metal gears.
Specifications:
Torque: 347oz-in @ 6.0V
Gears: Metal
Case: Aluminum center w/ full ball bearings
Length: 45mm
Width: 20mm
Height: 55mm
This product was added to our catalog or updated on April 4, 2022
