TRA3070X, Traxxas TRX Device Connector (2 Male)
Traxxas TRX Device Connector. Package includes two replacement connectors intended for Traxxas ESC's. NOTE: These connectors should only be used as replacement connectors for a Traxxas ESC.
This product was added to our catalog on May 7, 2021
TRA3064X, Traxxas Parallel Battery Wire Harness (Traxxas ID)
Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries.
Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on September 7, 2021
PTK-5211, ProTek RC Heavy Duty 15cm Universal Servo Y Extension Lead (1 Male/2 Female)
This is one 15cm (6") universal servo Y extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength.
The male plug installed on these extension leads are JR style connectors and will work with any radio system. The two female ends are designed to accept Futaba connectors, as well as JR, Aitronics and HiTec connectors. When plugging JR style connectors into the female connector, be sure to check for the correct polarity.
This product was added to our catalog on December 16, 2021
TRA2046, Traxxas Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
This product was added to our catalog on May 7, 2021
PTK-5042, ProTek RC Sheathed T-Style Plug (2 Male)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes two male plugs and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on December 16, 2021
SPMXCA508, Spektrum RC 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable
The Spektrum 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable allows you to connect batteries with an IC3 or EC3 connector to an IC5 connector equipped Spektrum Smart device. This adapter features a male bullet/female housing IC3 connector, combined with a female bullet/male housing IC5 connector, that is joined with 4"/100mm long 12awg wire.
This product was added to our catalog on May 31, 2021
SPMXCA503, Spektrum RC IC5 Device Connector (2) (Male)
Spektrum IC5 Device Connectors, including two Male IC5 Connectors.
This product was added to our catalog on December 31, 2021
TRA3070R, Traxxas 4S Male ESC Connector
Traxxas 4S Male ESC Connector. This optional connector is designed to allow for single 4S LiPo compatibility to the Traxxas VXL-6S ESC. Package includes two connectors and four terminals.NOTE:
This is for Traxxas ESC use ONLY.
Requires Traxxas TRA8527 jumper for unused battery lead.
This product was added to our catalog on September 7, 2021
PTK-5070, ProTek RC QS8 Anti-Spark Connector (1 Male/1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector, One Male Connector & End Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Comp
Flame retardant rating: UL94 V0
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A+
Weight: 41g (Male+Female Set)
Total Length: Approx 70mm (Male & Female w/End Cap)
Width: 29.5mm
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) QS8 Male Antispark connector
(2) Wire Caps
NOTE: T-style connector shown in photos is for size reference only, and is not included.
This product was added to our catalog on December 16, 2021
TRA3478, Traxxas Sledge Cooling Fan Wiring Harness
Traxxas Sledge Cooling Fan Wiring Harness. This replacement wiring harness is intended for the Traxxas Sledge equipped with the TRA3475 Cooling Fan. Package includes one wiring harness and one zip-tie.
This product was added to our catalog on August 1, 2022
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
TRA3063X, Traxxas Series Battery Wire Harness (NiMH Only)
Traxxas Series Battery Wire Harness. Use the series harness to combine battery voltage and unlock the 50+mph speed potential of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on May 7, 2021
PHBPH9022, QS8-S Male / Female Plug / Connector Set (QS8.0mm-S)
This system guarantees constant charging of the capacitors on ESC and allows the battery to be connected without sparks on your ESC when you first plug in.
The design also provides no chance of incorrect polarity connection. Once soldered up, there are plastic guards that clip on each connector giving you a neatly wired plug and helps prevent short circuits.
These QS8-S heavy duty gold plated connectors with built-in antispark resistors are great for high power electric models equipped with TMM 40063-3 X2-SERIES or TMM 25063-3 X2-SERIES
Continuous Current: 110AMax Peak Current: 500AMAX Wire: 6AWGDiameter: 8.0mmGuaranteed Long Battery LifeMetal Material: Gold Plated BrassPlastic Material: Nylon with fiber
ARA390292, Arrma IC5 Loop Connector - EC5 Compatible
This is the Arrma IC5 Loop Connector for use with models that use two IC5 or EC5 connectors, and using one battery is desired.
This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.
The IC5 connector provides a reliable, efficient connection between the ESC and battery.
This product was added to our catalog on June 19, 2021
DYNC0030, Dynamite EC5 to EC3 Connector Adapter (EC5 Female to EC3 Male)
This is a Dynamite EC5 Female to EC3 Male connector adapter. It adapts an EC5 device to accept an EC3 battery.
For the reverse adapter, see part EFLAEC509.
This product was added to our catalog on March 13, 2021
PTK-5071, ProTek RC QS8 Anti-Spark Connector (1 Male)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Male Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon
Flame retardant rating: UL94 V2
Temperature Range: -20C to +100C
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 35.9mm w/end capWidth:
Width: 29.5mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Male Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
PTK-5041, ProTek RC Sheathed T-Style (Deans) Plug (1 Male/1 Female)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes one male plug, one female plug and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on March 16, 2021
SPMXCA505, Spektrum RC IC5 4" Battery Connector
This is a Spektrum IC5 4" Battery Connector. This connector uses a Female IC5 plug and 10AWG, 4" long wire.
This product was added to our catalog on March 31, 2021
SPMXCA501, Spektrum RC IC5 Battery Connector (2) (Female)
This is a pack of Spektrum IC5 Battery Connectors, including two female IC5 plugs.
This product was added to our catalog on March 31, 2021
SPMXCA317, Spektrum RC IC3 Battery Adaptor Plug (Device to Deans) (2)
The IC3 Battery Adaptor Plug from Device to Deans style adapter. These are used to convert IC3 or EC3 equipped batteries to be used with applications that require a Deans connector. Package includes two adapter plugs.
This product was added to our catalog on May 14, 2021
PTK-5059, ProTek RC EC2 Connector (1 Male/1 Female)
Protek R/C EC2 Connectors. Package includes one male, and one female connector housing, with male and female bullets.
This product was added to our catalog on December 16, 2021
SPMXCA303, Spektrum RC IC3 Device Connector (2) (Male)
Spektrum IC3 Device Connector Set, including two Male IC3 connectors.
This product was added to our catalog on December 31, 2021
MCL4115, Maclan XT90 Connector (3 Female/3 Male) (Yellow)
Maclan XT90 Connector Set. Package includes three male and three female XT90 Connectors.
Features:
Authentic XT90 connectors
This product was added to our catalog on April 30, 2021
TRA8527, Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas dual-battery 25.2V ESC to run on a single 14.8V battery pack)
This product was added to our catalog on May 7, 2021
RCE1613, Racers Edge Battery/ESC Adapter: Female EC5 to Male XT90
The adapter allows the use of an XT90-equipped battery back in vehicles (such as ARRMA) with EC5 connectors on the ESC.
This product was added to our catalog on June 4, 2021
SPMXCA318, Spektrum RC 4" IC3 Battery to EC2 Device Charge Adapter
This Spektrum RC IC3 Battery to EC2 Device Adapter cable is used for connecting an IC3 Device such as Spektrum SMART Chargers, and connecting EC2 equipped batteries. Can also be used for ESC connections that use IC3 or EC3 ESC connectors to connect a battery with an EC2 connector.Specifications:
Overall length (end to end): 4.5"
Wire length: 3.25"
This product was added to our catalog on May 10, 2021
SPMXCA304, Spektrum RC IC3 6" Device Charge Lead w/4mm Bullets
Spektrum IC3 6" Device Charge Lead. Package includes one charge lead made with 13awg wire and 4mm bullets.
This product was added to our catalog on December 24, 2021
