By Scale
Traxxas 75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer w/2.4GHz 2-Channel Radio
75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer (Red) w/2.4GHz 2-Channel Radio The LaTrax Rally 1/18 incorporates precision and performance into a compact and incredibly affordable model that goes with you anywhere and is ready for fun in an instant. The LaTrax Rally is fully assembled and Ready-to-Race, with everything you need included in the package. The powerful motor, all-wheel drive, and fully independent suspension immediately transform the world beneath your feet into a racetrack. Offices, malls, sidewalks, and playgrounds are the site for your next racing challenge. Long run times and the dependable 2.4GHz radio system extend your playtime. The LaTrax Rally is built to last, protected by world-class Traxxas support, 100% parts availability, and the Traxxas Lifetime Electronics Warranty. The LaTrax 1/18 Rally captures the distinctive look and exciting performance of a true rally car with its lowered stance, tough wide-body styling, and 12-spoke rally wheels. The model is an impressive street machine on asphalt while the fully independent suspension, full-time 4WD, and all-weather electronics carry it confidently off-road. Hang it out in the turns and hustle down the straights with the perfect blend of speed, power, and traction—4WD makes it easy to drive like a pro! The suspension system has been expertly engineered for high-performance handling right down to the coil-over friction shocks and firm, road-tuned springs. The chassis balances strength, weight, function, and style in an impressive achievement of packaging and performance optimization that's built for hours of driving fun. High Capacity 6-volt NiMH Battery Pack with iD™ LaTrax 1/18 Rally includes an iD-equipped 6V NiMH battery and convenient AC wall outlet charger. This potent pack features heavy-duty construction, 16-gauge wires and Traxxas' exclusive patented High-Current Connector for efficient power transfer, run after run. Everything you need is in the box, even 4 AA alkaline batteries! Accessory Traxxas iD chargers (sold separately) auto-detect LaTrax/Traxxas iD-equipped batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity. Waterproof, All-Weather Electronics for No-Limits Radio Control Fun! Waterproof, all-weather electronics open the door to new driving adventures on water-soaked racing surfaces. The 1/18 LaTrax Rally doesn't slow down for rain, puddles, ice, or snow! The waterproof servo and weather-sealed receiver box (patent pending) let you keep going, even in wet conditions that stop other cars in their tracks. It's total driving freedom! 100% Fully Assembled and Ready-To-Run The 1/18 LaTrax Rally is fully assembled with a 2.4GHz radio system, painted and decaled body, pre-glued tires, and easy instructions. A LaTrax 6V rechargeable NiMH battery pack, wall outlet charger, and 4 Traxxas Power Cell AA alkaline batteries are also included. Everything you need for fun is in the box. Features: Fully assembled and Ready-To-Run Tough, rally-inspired body design with cutting edge graphics Pre-glued, low-profile slick tires mounted on white, 12-spoke rally wheels Impact-absorbing foam front bumper Adjustable-height body mounts Waterproof, all-weather electronic speed control Innovative all-weather design Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Forward / Brake / Reverse Race Mode – Forward / Brake Training Mode – 50% Forward / Brake / 50% Reverse EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design Smooth, high-frequency operation Powerful 370 brushed motor Includes LaTrax 6V 5-cell NiMH battery pack and wall outlet charger High-torque waterproof sub-micro steering servo Weather-sealed receiver box (patent pending) Full-time 4WD Front and rear gear differentials Front C-hub design with universal driveshafts Rear axle carrier with universal driveshafts Coil-over shocks with variable mounting positions 4-wheel fully independent suspension Fiber-composite chassis Speed control and receiver are securely fastened to chassis Quick-release battery hold-down for fast battery pack changes 2.4GHz transmitter 2-channel transmitter Servo reversing Electronic steering trim controls Low battery indicator Internal antenna Distinctive, ergonomic, contour grip Award-winning Traxxas support and parts availability Manufacturer Lifetime Electronics Warranty Specifications: Length: 10.4" (265mm) Front Track: 4.17" (106mm) Rear Track: 4.23" (107.5mm) Weight (with battery): 19.5oz (554g) Weight (without battery): 15.2oz (430g) Height (overall): 3.5" (90mm) Wheelbase: 6.5" (165.3mm) Wheel Diameter: 1.3" (33mm) This product was added to our catalog on May 23, 2021
$119.99
Traxxas 97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler
97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The lifted High Trail pickup offers over 35% more center ground clearance than a standard TRX-4M with an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality and performance you expect from Traxxas. LONG ARM LIFT KIT The High Trail edition’s Factory Installed Long Arm Lift Kit and larger tires raise the center ground clearance over 35% for a dramatic lifted stance. Revised shock mounts and extended links ensure the truck maintains its carefully-tuned suspension geometry for peak performance on challenging terrain. NEW LARGER 2.4″ TIRES Larger 2.4″ Mickey Thompson® Baja Pro™ XS replicate the full size tire’s aggressive tread pattern and fill out the High Trail Edition’s wheel wells for an authentic “lifted truck” look. Sticky compound rubber and trail-tuned foam inserts give extra “bite” for superior traction on the trail. EXTENDED WHEELBASE The High Trail Edition’s steel frame rails extend the wheelbase out to 162mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. DETAILED CLIPLESS BODY The TRX-4M Chevrolet K10 clipless body holds tight on the trail but releases in just seconds with a hidden latching system to preserve its clean lines. The tough ABS body featured molded-in color with highly detailed chrome trim for complete scale authenticity. INNOVATION K10 High Trail Edition’s Long Arm Lift Kit expands the core features and capabilities of the standard TRX-4M while maintaining its trail-bred suspension geometry. Length: 10.6 inches (269mm) Front Track: 5.0 inches (127mm) Rear Track: 5.0 inches (127mm) Center Ground Clearance: 1.57 inches (40mm) Weight (with battery): 1.03lbs (468g) Height: 5.0 inches (127mm) Wheelbase: 6.38 inches (162mm) Approach Angle: 62° Breakover Angle: 51.5° Departure Angle: 52° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Differential Type: Fully Locked; 2:1 Axle Ratio Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm) Tires (front and rear): 2.4 x 1.0 inches (61.9 x 25.6mm) Electronic Control Module: ECM-2.5™ (Combo ESC, Receiver, Lighting Control*) Motor (electric): Titan® 180 87T Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft-Driven 4WD Steering: Axle-Mounted Servo Radio System: TQ™ 2.4GHz 2-Channel Transmitter Servo: #2065T Heavy Duty Waterproof Skill Level: 1 Battery Tray: 50.5mm L X 31mm W *Requires accessory Pro Scale LED Light Kit, sold separately ACCESSORIES Traxxas makes a full line of high-performance parts and detailed accessories to get the most out of your TRX-4M. Compatibility and fitment are never an issue when you buy genuine Traxxas products. This product was added to our catalog on August 21, 2023
$179.95
Traxxas 89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM
89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM The Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck with WideMaxx Kit is the next level in ultimate basher chassis. This special chassis comes equipped with the WideMaxx suspension kit from the factory for greater stability. Traxxas has totally revamped the Maxx chassis for this release. Starting on the four corners, Traxxas equipped this truck with the Sledgehammer tires. These tires feature an open-block design that clears away mud allowing for unreal traction. Moving to the suspension, Traxxas then equipped the truck with the WideMaxx suspension set. This extends the width over 1.5 inches improving stability. To further add to the stability, a longer chassis is used allowing allowing the use of larger and more powerful batteries. All of these features come together to make the Traxxas Maxx an extremely durable and stable chassis. With six colors to choose from, the Traxxas Maxx with WideMaxx will be able to exceed expectation. Features: Refined shock tower design Full length motor cradle Updated wheels and tires Clipless Body Mount System Quick one-hand installation and removal Waterproof WideMaxx double-shear suspension arms 1.57” (40 mm) wider for improved handling Tough composite formula resists impact damage, even in cold weather Modular chassis design GT-Maxx Aluminum Shocks 60+ MPH with optional gearing and single 4S LiPo battery (sold separately) Full contact sealed bearings Torque-biasing center drive Easy Battery Access Extended battery tray accepts Traxxas’ 6700mAh 4-cell LiPo battery Aluminum splined driveshaft Steel gear differentials Extreme-duty telescoping driveshafts Specifications: Length: 22.50 inches (572mm) Front Track: 15.95 inches (405mm) Rear Track: 15.95 inches (405mm) Ground Clearance (lowest skid): 1.90 inches (49mm) Ground Clearance (center skid): 2.6 inches (67mm) Weight: 10.40 lbs (4.7kg) Height (ride): 9.12 inches (232mm) Wheelbase: 13.85 inches (352mm) Shock Length: 4.90 inches (124mm) Tire Diameter: 5.64 inches (143mm) Wheel Diameter: 2.8 / 3.6 inches (70 / 92mm) Speed Control: Velineon VXL-4s Motor (electric): 540XL (2400 kV) Transmission: Single-Speed Overall Drive Ratio: 12.37 (23/50 motor pinion and spur gear) Included: (1) Traxxas Maxx with WideMaxx and Traxxas 540XL brushless motor (1) Quick Start Guide (1) TQi 2.4GHz radio system High quality maintenance tools Needed to Complete: (1) 3-4S LiPo Battery with Traxxas ID connector (1) Compatible Traxxas LiPo Balance Charger (4) AA Batteries This product was added to our catalog on April 12, 2021
$569.99
Traxxas 97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition
97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition with TQ 2.4GHz Radio System This product was added to our catalog on October 27, 2023
$179.95
Traxxas TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch
TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch Traxxas TRX-4M Utility Trailer. This is a great option trailer to add to your Traxxas TRX-4M for all your 1/24 hauling needs. Package includes one trailer, hitch, and pre-load spacers for rear shocks.Note: This is a scale accessory intended for 1/24 remote control rock crawlers. This product was added to our catalog on January 24, 2023
$29.99
Traxxas TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete
TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete Traxxas Bronco Complete Light Kit. The Traxxas TRX-4M Bronco Pro Scale Advanced Lighting Control System adds the ultimate scale look to your Bronco. Package includes headlights, fog lights, tail light housing, two zip ties, and mounting screws. Features: Waterproof 5 Lighting Modes Single wiring harness connection to ECM-2.5 This product was added to our catalog on January 12, 2023
$24.99
Traxxas 76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger
76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck. Taking from the features of the full sized Prerunner this small sized RC is fast, nimble and durable for extreme all-terrain use. Equipped with a powerful brushed motor, full independent suspension, oil-filled shocks and 4-wheel drive, the Latrax Prerunner is Ready to Run right out of the box. Features: ProGraphix® multi-colored painted body Off-road tires mounted on 5-spoke wheels Impact-absorbing front and rear bumpers Adjustable-height body mounts Waterproof Electronic Speed Control Powerful 370 brushed motor Includes 7.2v NiMH battery pack with iD and AC wall charger High-torque waterproof sub-micro steering servo Weather-sealed receiver box (patent pending) Full-time 4WD Front and rear all-metal gear differentials Front C-hub design with universal driveshafts Rear axle carrier with universal driveshafts Oil-filled shocks with variable mounting positions 4-wheel fully independent suspension Fiber-composite chassis Speed control and receiver are securely fastened to chassis Quick-release battery hold-down for fast battery pack changes Award-winning Traxxas support and parts availability Specifications: Length: 12.32 inches (313 mm) Front Track: 6.73 inches (171 mm) Rear Track: 6.73 inches (171 mm) Weight: 26.06 ounces (739 g) Height: 4.80 inches (122 mm) Wheelbase: 7.05 inches (179 mm) Wheel Diameter: 1.38 inches (35 mm) Shock Length (front/rear): (60 mm) Ground Clearance: .6 inches (15 mm) Front/Rear Tires: Slash Front/Rear Wheels: 5-spoke Electronic Speed Control: Waterproof forward/reverse ESC Motor: 370 brushed Transmission: 9T pinion / 61T spur Gear Ratio (internal): 2.5:1 Overall Drive Ratio: 15:1 (Stock, out-of-box) Differential Type: Hardened steel bevel (ring and pinion) Gear Pitch: 0.5 Mod. Chassis Structure/Material: Monocoque molded composite Nylon Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: 2.4GHz radio Skill Level: 1 Battery Tray Dimensions: 102 mm x 35 mm x 18 mm Includes: (1) Blue LaTrax Desert Prerunner 1/18 4WD RTR (1) 7.2 V NiMH (1) Charger (4) AA Batteries Needed to Complete: Nothing! Everything is included in the box. This product was added to our catalog on April 10, 2021
$129.99
Traxxas TRA9784, Traxxas TRX-4M Defender LED Complete Light Set
TRA9784, Traxxas TRX-4M Defender LED Complete Light Set Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. This product was added to our catalog on November 8, 2022
$24.99
Losi LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC
LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC The Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy is built off the legendary TEN platform - a design known as one of the toughest available. The Losi TENACITY DB Pro Buggy is a continuation of that dominance. The TENACITY DB Pro includes a full metric hardware package and aluminum features the other guys sell as option parts. The TENACITY DB Pro desert buggy offers Spektrum Smart technology with a 130A Brushless ESC and Firma 4-Pole 3150KV 550 Motor that can achieve 50+ MPH speeds with a 3 cell LiPo battery. The ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. Drivers stay in control with a Spektrum DX3 3-Channel DSMR Radio System and a Spektrum AVC receiver, while scale-to-size Falken Wildpeak MT tires and Method wheels help to achieve control at high speed. Finally, the TENACITY DB has a scale-inspired Desert Buggy body along with an updated wing and off-road buggy inspired wheel design. Features: Losi TEN 4WD Platform Spektrum Smart 130A Brushless ESC and Spektrum Firma 4-Pole 3150Kv Motor Spektrum DX3™ 3-Channel DSMR® Radio System Spektrum SR6200A DSMR 6-Channel AVC Surface Receiver Spektrum S614 Waterproof Metal Gear Surface Servo, 23T Waterproof Components 12mm Race Inspired Aluminum Bodied Shock Absorbers and Caps Race Inspired Scale Body Falken Wildpeak MT Tires Sway Bars Adjustable Turnbuckles Officially Licensed Trim Schemes from Fox Racing and Lucas Oil Front LED bar Three Silicone Filled Gear Differentials Center Differential Specifications: Product Height: 6.89" (175 mm) Product Length: 21.1" (536 mm) Product Weight: 6lb (2.72kg) Without Battery Product Width: 11.7" (297 mm) Front Track: 11.5" (292mm) Rear Track: 11.5" (292mm) Wheelbase: 13.1" (333 mm) Wheel Width: 1.63 in (41.4mm) Internal Gear Ratio: 3:89:1 Speed: 50+ Includes: (1) Losi TENACITY DB Pro 1/10-scale 4WD Buggy (1) Spektrum DX3 Smart 3-Channel DSMR Radio System (1) Spektrum SR6200A DSMR 6-Channel AVC Surface Receiver (1) Spektrum Smart 130A Brushless ESC (1) Spektrum Firma 4-Pole 3150Kv 550 Motor (1) Spektrum S614 Waterproof Metal Gear Surface Servo, 23T (1) User Manual Needed to Complete: (1) 5000mAh 2-3S LiPo Battery with IC5 Connector (1) Suitable LiPo Battery Charger This product was added to our catalog on February 9, 2022
$499.99
Traxxas TRA9779, Traxxas TRX-4M Metal Axle Gears
TRA9779, Traxxas TRX-4M Metal Axle Gears Traxxas Gears Axle Metal Front + Rear This product was added to our catalog on October 3, 2022
$10.00
XRAY XRA803053, HUDY 1/10 TC Carpet Tires C3-28 (4)
XRA803053, HUDY 1/10 TC Carpet Tires C3-28 (4) This product was added to our catalog on May 21, 2023
$36.99
McAllister Racing MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th
MR326, "EL Jefe" NextGen Camaro 1/18th Little Cars for BIG FUN! The “EL Jefe” is a 1/18th scale NextGen Camaro body designed specifically for the Traxxas LaTrax Rally 1/18 4wd. We nicknamed this body "EL Jefe" aka "The Boss" because this spicy little guy will be taking command on the track, in the driveway, or across your living room! Included with the body: Easy to follow cut lines, pre-cut decal detail sheet, pre-cut window masks, spoiler, and hardware. The last picture is how the mounts need to be set up to best suit the body. This body will require the chassis to be used in the short wheelbase to match perfectly with the wheel wells. Made in the USA with genuine .030 American Made Lexan. This product was added to our catalog on June 1, 2023
$29.99
Dynamite DYNS1217, Dynamite SCX24 Motor w/Pinion
DYNS1217, Dynamite SCX24 Motor w/Pinion The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one motor with pinion and two screws. This product was added to our catalog on June 5, 2021
$9.00
Traxxas 92046-4, Traxxas TRX-4 1979 Ford F-150 High Trail Edition
92046-4, TRX-4 1979 Ford F-150 High Trail Edition Traxxas TRX-4 High Trail RC Crawler with '79 Ford F-150 Body The Traxxas TRX-4 1/10 High Trail Edition RC Crawler with '79 Ford F-150 Ranger XLT Truck Body has been designed to offer scale performance and adventure. Thanks to its factory-installed Long Arm Lift Kit and oversize tires, the highly detailed 79 Ford F-150 Ranger XLT body stands over an inch taller than the standard TRX-4 chassis. The F-150's extended wheelbase further enhances the TRX-4’s legendary off-road capability for better performance on the trail. To further the appearance, this truck uses the Traxxas Clipless Body Mounting for added scale realism. The TRX-4 High Trail Edition is the perfect vehicle for the driver who wants it all: extreme all-terrain capability, stunning scale looks, and extreme durability. This High Trail Edition TRX-4 uses portal axles, 110mm threaded shocks and a lift kit for extreme ground clearance. Oversized Canyon Trail tires are mounted to chrome 2.2" wheels to improve both performance and ground clearance. When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain. Features: Molded Scale Detail: The 1979 Ford F-150 Ranger XLT Pickup Body comes with authentic-looking chrome wheels, side mirrors and windshield wipers. Clip-less Body Mounting System: Traditional posts and body clips are gone, and instead an integrated quick-release system secures the body invisibly. The hidden mechanism holds tight on the trail yet releases in just seconds to access the chassis. Trail-tuned XL-5 HV Waterproof Electronic Speed Control: HV electronic speed control brings 3s LiPo capability for strong efficient running. The powerful 21T Titan motor provides torque for hauling heavy loads and climbing steep grades. Factory-Installed Long Arm Lift Kit: The lift kit not only gives you an extra inch of ground clearance but also maintains the TRX-4's suspension geometry. Extended Wheelbase: The K10’s steel frame rails extend the wheelbase out to 336mm to capture the pickup’s real-world proportions perfectly. The Power of Portals: The K10’s portal axles work in tandem with the Lift Kit to lift the truck for huge center ground clearance. The portal axles’ internal gear reduction virtually eliminates torque twist, keeping the K10 straight and on course. Extended Aluminum GTS Shocks: These shocks are 20mm longer than the standard GTS shocks. The threaded shock bodies are silver-anodized to deliver silky-smooth dampening. Oversize Wheels and Tires: The aggressive Canyon Trail tires feature large lugs for increased grip with foam inserts for realistic trail performance. Slotted chrome Mag wheels come with replica locking hubs to conceal the wheel nuts. Sealed Ball Bearings: Reliable sealed ball bearings are used throughout the chassis for long-lasting performance. Specifications: Scale: 1/10 Length: 22.30inches (566mm) Track Width (Front/Rear): 10.60inches (270mm) Center Ground Clearance: 4inches (99mm) Height (Overall): 10.82inches (275mm) Wheelbase: 13.23inches (336mm) Weight (w/o Battery): 7.38lbs (3.35kg) Shock Length (Front/Rear): 4.33inches (110mm) Wheels (Front/Rear): 2.2x1.34inches (56x34mm) Tires (Front/Rear): 5.3x2.14inches (135x54mm) Approach Angle: 73.5° Departure Angle: 49.67° Breakover Angle: 67° Hex Size: 12mm Gear Pitch: 32P Battery Tray Size (LxWxH): 158.75x47x23/26mm Includes: (1) Traxxas TRX-4 1/10 High Trail Edition RC Crawler with '79 Ford F-150 Ranger XLT Body (1) TQi 2.4 GHz 4-Channel Transmitter Maintenance Tools Needed to Complete: (4) "AA" Batteries (for transmitter) (1) NiMH Battery (4-7 cell) or LiPo Battery (2S/3S) (1) Compatible Battery Charger This product was added to our catalog on March 3, 2023
$549.99
Traxxas TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T)
TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T) Traxxas TRX-4M Low Range Transmission Gear Set. This optional gearset provides superb crawling speeds ideal for conquering steep and aggressive terrain. Featuring an ultra-low 40.3:1 reduction ratio this gives you maximum rock-climbing power. Traxxas offers a variety of gearsets to suit your application that can be used to customize your vehicle to your preferences. Package includes all transmission gears and an 11t pinion. Optional Gearsets: TRA9776R: 40.3:1 Reduction Ratio TRA9776: 16.6:1 Reduction Ratio TRA9776R: 9.7 Reduction Ratio This product was added to our catalog on May 24, 2023
$5.00
Hot Racing HRASXTF10H, Brass Stock Wheels hub 7mm hex SCX24
HRASXTF10H, Hot Racing Axial SCX24 Brass 7mm Wheel Hex Hub (4) Hot Racing Axial SCX24 Brass 7mm Wheel Hex Hubs are a machined upgrade that adds a total of 4g weight down low for improved overall performance. Package includes four hex hubs and four axle pins. Features: CNC Machined Solid Brass construction Adds weight down low for improved performance 4g of total unsprung weight Specifications: Hex: 7mm Inner diameter: 4mm Includes: (4) Hex Wheel Hubs (4) 2 x 6mm Axle Pins This product was added to our catalog on December 16, 2021
$9.00
Traxxas TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2)
TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2) This product was added to our catalog on October 3, 2022
$12.00
Traxxas Traxxas Wheels 1.0" Method Race Wheels 105 2Pk
Traxxas Wheels 1.0" Method Race Wheels 105 2Pk Traxxas Method Beadlock Rims. These Method race beadlock rims are an upgrade for your TRX-4M. Designed to work with Traxxas brass wheel weights (TRA9780) and Mickey Thompson Baja Pro X (TRA9782). Package includes two rims and hardware. This product was added to our catalog on January 12, 2023
$7.00
Traxxas 67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module
67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module The Rustler 4x4 VXL Ultimate is the ultimate Heavy Duty choice for speed enthusiasts seeking robust capabilities, boasting unparalleled agility and unstoppable 4WD traction. Beneath its reinforced clipless body, the Rustler's low and broad chassis guarantees superb stability and precise maneuverability, setting the bar higher for handling prowess. Packed with both chassis and electronics updates the Rustler 4x4 is more exciting than ever! The Rustler 4x4 VXL Ultimate pre-installed Extreme Heavy Duty Upgrade Kit elevates its drivetrain and suspension to unparalleled levels of strength. Boasting reinforced components from heavy-duty suspension arms to steel wheel hubs, this upgrade kit forms the strongest driveline ever offered in a Rustler. Additionally, the clipless body mounting system ensures secure attachment and swift, single-handed removal/installation, featuring a sleek, aerodynamic design fortified by an internal rugged structure and external rollover protection. Equipped with a powerful Velineon 3500 brushless system, the Rustler Ultimate is capable of running 2S to 3S LiPo with a top speed of 60+ MPH! providing the Rustler 4x4 VXL Ultimate with all the power needed for shredding tires, doing wheelies on demand and be a robust speed weapon! Carve corners like a pro thanks to Rustler 4x4 VXL Ultimate’s adjustable sway bars and ultra-smooth, PTFE-coated aluminum GTR shocks. Rustler 4x4 VXL Ultimate’s agility and 4-wheel drive grip is further enhanced by its 2.8" Gravix tires. Pioneered on XRT, Gravix tires deliver outstanding grip on hard-packed surfaces with fast and quiet-running precision. comes fully loaded with aluminum upgrades for maximum strength and durability and they’re color-matched to the body. Brightly anodized caster and steering blocks, axle carriers, and chassis stiffener look as good as they perform and give Rustler 4x4 VXL Ultimate the brute strength required for extreme driving. A Traxxas Link Wireless Module comes standard on Rustler 4x4 VXL Ultimate along with factory-installed telemetry sensors to unlock the full potential of the TQi transmitter. Adjust the transmitter’s settings on the fly and record real-time telemetry data like speed, RPM, and battery voltage on your mobile device using the free Traxxas Link app! Features: Velineon 3500 Brushless Power System: Capable of running 2S to 3S LiPo with a top speed of 60+ MPH! Extreme Heavy Duty Upgrade Kit: Upgraded drivetrain and suspension components for ultimate strength, including HD suspension arms and steel wheel hubs Clipless Body Mounting: Secure body latching system for easy one-handed removal/installation, aerodynamic design with rugged internal structure for durability Modular Chassis: Easily perform maintenance and repairs with the Rustler 4x4's modular chassis design Ultimate Features: Anodized aluminum chassis stiffener brace CNC-machined anodized aluminum caster, steering blocks and hub carriers Extremely lightweight aluminum center driveshaft Blue anodized PTFE-coated aluminum GTR shocks with nitride coated shafts Factory installed composite body reinforcement Low CG (Center of Gravity) chassis Adjustable front and rear sway bars High speed metal gear servo All-Terrain Gravix tires on RXT wheels Specifications: Scale: 1/10 Length: 18" (457mm) Width: 12.94" (329mm) Wheelbase: 11.6" (295mm) Weight: 5.13lbs (2.33kg) Drive: 4WD Power Source: Electric Input Voltage: 6-7 cells (7.2-8.4V) NiMH 2-3S (7.4-11.1V) LiPo Gear Ratio: 12.81:1 Assembly Level: Ready To Run Includes: (1) Rustler Ultimate 1/10 4x4 Brushless RTR Stadium Truck (1) User Manual Needed to Complete: (1) 6-7 Cells NiMH or (2-3S) LiPo Battery w/iD Connector (1) Compatible Battery Charger (4) (AA) Batteries for Transmitter This product was added to our catalog on November 11, 2023
$529.99
Traxxas TRA2065T, Traxxas Servo Sub-Micro Waterproof
TRA2065T, Traxxas Servo Sub-Micro Waterproof This product was added to our catalog on October 3, 2022
$29.99
Traxxas TRA9883, Traxxas Pro Scale LED light set, complete (fits #TRA9811)
TRA9883, Traxxas Pro Scale LED light set, complete (fits #TRA9811) This product was added to our catalog on November 2, 2023
$24.99
KYOSHO KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger
KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run. Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023
$249.99
Traxxas TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g)
TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g) Wheel weights, brass (31 grams each) (2) (requires #9781 series wheels)Each brass wheel weight adds 31 grams to the lowest part of your TRX-4M™ for improved anti-rollover stability and superior rock-climbing capability. Brass wheel weights replace the standard beadlock barrels and must be used with 9781 beadlock wheels. Sold as a pair.WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product was added to our catalog on January 30, 2023
$19.99
Axial AXI00009, Axial SCX24 Flat Bed Mini Vehicle Trailer w/LED Taillights
AXI00009, Axial SCX24 Flat Bed Mini Vehicle Trailer w/LED Taillights The SCX24 Trailer is purpose-built for 1/24 scale RC use, designed to perfectly complement any Axial SCX24 rig. Equipped with fully functional features, it features four 1.75” tall rubber tires on 1” wheels with a matching hex size to your SCX24. The included hitch makes it effortless to put your SCX24 to work, complete with hide-away ramps for vehicle loading and unloading. Affordable, fully assembled, and ready for action, the Axial SCX24 Flat Bed Vehicle Trailer isn't just a scale accessory it transforms your 1/24 scale rig into an adventurous mobile crawler transport. Features: Flat bed design Fully assembled and ready to haul Designed to transport any SCX24, AX24, or similarly sized vehicle Realistic LED running lights Fully functional with many display-worthy details Durable composite construction Specifications: Scale: 1/24 Length: 12.25" (311mm) Width: 4.5" (114mm) Height: 2" (51mm) Wheelbase: 6.1" (155mm) Weight: 11.5oz (325.5g) Includes: (1) Axial SCX24 Flat Bed Mini Vehicle Trailer (2) Storable ramps (1) SCX24 hitch and receiver hardware (1) Product Manual Needed to Complete: Everything you need to haul is included This product was added to our catalog on October 3, 2023
$44.99
Tamiya TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck
TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck This is a Tamiya 1/14 Tankpool24 Mercedes Actros 4WD On-Road Semi Truck, an impressive model that recreates the Mercedes Actros as raced by the Tankpool24 team in the 2019 ETRC (European Truck Racing Championship). This specific recreation depicts the truck that carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model. Features: 1/14 scale R/C model assembly kit Three-part polycarbonate body with components for body, cab and coupler Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem Includes stickers recreating the sponsors and livery Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customization potential TT-01 Type-E chassis Hop-Up Options available Includes 540-Type Brushed motor Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Adjustable Gear Ratio: Yes Bearings: Plastic bushing Body Material: Polycarbonate Body Stickers: Included Chassis Material: ABS Plastic Chassis Type: TT-01E Construction Type: Assembly Kit Differential Type: Gear Drive Type: 4WD Electronic Speed Control: Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Motor: Brushed 540 Type Length: 441mm Width: 188mm Wheelbase: 257mm Needed to Complete: 2 channel radio system Steering servo Polycarbonate paint for body 7.2V battery & charger This product was added to our catalog on December 16, 2021
$164.99
McAllister Racing MR286, McAllister Racing 1969 Mustang VTA
MR286, 1969 Mustang VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on June 1, 2023
$29.99
CEN Racing CEGCKR0406, Long Battery Straps (2pcs), for Colossus XT
CEGCKR0406, Long Battery Straps (2pcs), for Colossus XT
$2.99
LOSI LOS04024, Losi King Sling / Bog Hog Body RTR 1/10 4WD Solid Axle Mega Truck w/DX3 2.4GHz Radio
LOS04024, Losi King Sling / Bog Hog Body RTR 1/10 4WD Solid Axle Mega Truck w/DX3 2.4GHz Radio The Losi LMT RTR 1/10 4WD Solid Axle Mega Truck has been designed to be overpowered and overbuilt for mud flinging fun. Mega trucks resemble monster trucks but use a specific size of tractor tire that allows them to tackle mud bogs, make large jumps, and pound through the nastiest terrain. This truck comes in two licensed body schemes, Bog Hog and King Sling, for high octane looks. Get the Losi LMT Mega Truck for some high octane fun. Based on the bar-setting LMT chassis, the Losi Mega truck is focused exclusively on the thrill of "sending it" with insane power. Equipped with a Firma 3668 2800kV motor, it looks just like the real thing, it’s just as impressive as the real thing and you can drive it just like the real thing! Whether you’re driving the Bog Hog or King Sling radio control Mega truck, you have the same potency to do insane backflips, skim across the deepest mud puddles, and jump higher and farther than ever before. This truck features CRUSH Drive Technology on the center drive gear to act as a torque dampener to protect the drivetrain. Features Officially Licensed King Sling and Bog Hog Body Scale Solid-Axle Housing 1/8 Scale Metal Drive Train with CUSH Drive Powder-Coated Vertical Plate Chassis Flip Top Cage - No exposed body clips Officially Licensed D&D Paddy Tire and Wheel Long Travel, Oil Filled, Coil-Over Shocks Specifications: Scale: 1/8 Scale - Monster Truck Drive: 4WD Power Source: 2-4S LiPo (Sold Separately) Length: 21.25" (540mm) Wheelbase: 15" (381mm) Width: 13.25" (337mm) Height: 11.5" (292mm) Weight: 153.6oz (4354.49g) Electronics: Motor: Firma 3668 2800kV ESC: Firma 130A Brushless Smart ESC Connector: EC5 or IC5 Servo: Spektrum S614S Wheels: Front: D&D Paddy Rear: D&D Paddy Tires: Front: D&D Paddy Rear: D&D Paddy Includes: (1) Losi LMT 4WD Solid-Axle Mega Truck (1) DX3 Transmitter (1) Battery Foam Block Support (1) Zero Degree Rear Hubs (1) Instruction Manual (1) Product Card (4) AA Transmitter Batteries Needed to Complete: (1) 2-4S LiPo Battery with EC5 or IC5 Connector (1) Compatible LiPo Battery Charger This product was added to our catalog on September 9, 2022
$649.99
Traxxas TRA9790, Traxxas Led Light Set Trx-4M #9795 Trailer
TRA9790, Traxxas Led Light Set Trx-4M #9795 Trailer The Trailer Light Kit adds working brake and reverse lights to the TRX-4M™ utility trailer. Give your trailer and extra dose of scale realism with this all-inclusive kit. The light kit is fully compatible with TRX-4M’s standard bumper lights and the Pro Scale® Light Set. Trailer lights are easy to install with the included mounting hardware and replica tool box. Everything is completely waterproof for worry-free driving in any environment. Features Working brake and reverse lights Fully waterproof Compatible with existing TRX-4M light kits Simple installation with all mounting hardware included This product was added to our catalog on August 18, 2023
$24.99
Racers Edge RCE3240, Racers Edge 40 Weight, 500cSt, 70ml 2.36oz Pure Silicone Shock Oil
RCE3240, Racers Edge 40 Weight, 500cSt, 70ml 2.36oz Pure Silicone Shock Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$8.99
KYOSHO KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M)
KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M) Kyosho FZ02 Pre-Mounted TC Tire in M compound. Package includes two replacement tires intended for the Kyosho Fazer Mk2. This product was added to our catalog on August 15, 2022
$24.99
KYOSHO KYO34472T1, Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R Drift ReadySet
KYO34472T1, Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R Drift ReadySet w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm (approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on July 19, 2022
$269.99
ARRMA ARA7615V2, Arrma Infraction V2 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Truck w/DX3 2.4GHz Radio, Smart ESC & AVC
ARA7615V2, Arrma Infraction V2 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Truck w/DX3 2.4GHz Radio, Smart ESC & AVC The Arrma Infraction V2 6S BLX Brushless 1/7 RTR Electric 4WD Street Bash Truck is ideal for intermediate-level drivers who are eager to experience street bashing at 80+ MPH speeds (achievable in optimum conditions using a 6S LiPo and the included speed pinion gear). Its Spektrum DX3 radio and Smart brushless power system components provide real-time telemetry that also helps you reach and maintain maximum performance. Another feature to the INFRACTION 6S BLX 4WD is a handbrake. The chassis includes a module for a rear vented disc brake and a powerful Spektrum SPMS650 brake servo. You control the handbrake from a convenient switch on the DX3 transmitter for thrilling drifting, "hooning" and stunt action. With its 4X4 traction, you can run the INFRACTION 6S BLX 4WD on all roads, in all conditions — over loose gravel, asphalt, smooth dirt, and short grass, in the sun, rain, and ice — while enjoying fresh RESTO MOD looks. The street body arrives factory-finished with new matte gloss effect designs. The included tunable wing lets you customize the downforce just the way you want it. To further enhance the aerodynamics, the chassis includes a full-width front splitter that balances downforce distribution. A rear diffuser increases downforce and grip, enabling you to corner faster and with confidence. Mounted on realistic 5-spoke wheels, the four dBoots Hoons all-road tires keep their grip on the surface to pour on speed or stop on a dime. Underneath those streamlined Street Bash looks is a chassis which proves to the world, once again, that ARRMA® builds the most durable bashers. The 6061-T6 anodized aluminum chassis houses a heavy-duty drivetrain with steel driveshafts, plus all-metal diff outdrives and gearbox internals. Updated internal gears feature a new tooth profile for increased strength. A lower internal gear ratio reduces the center line transmission RPM, reducing the center drive shaft resonance and increasing drivetrain durability. Chassis toughness is reinforced with a center brace. Bearings are rubber-shielded, and the adjustable, oil-filled, anodized aluminum shocks are mounted on strong, black-anodized aluminum shock towers. ARRMA has equipped the ready-to-run INFRACTION 6S BLX 4WD with the 3-channel Spektrum DX3 radio and an SR6110AT receiver featuring AVC (Active Vehicle Control) technology for high-speed stability. A convenient voltage level indicator is built into the transmitter which lets you easily track on-board Smart battery power. The vehicle's brushless power system also features Spektrum Firma Smart components, so it's easy to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Just download the Spektrum Dashboard app for iOS or Android, available for free at the App Store or Google Play. Features: Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) Compatible with Spektrum® Dashboard™ app for iOS or Android ARRMA® ADS-15M Waterproof Steering Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® SPMS650 Waterproof Brake Servo (For details on waterproof standards, please refer to the product instruction manuals) Spektrum® Firma™ 150A Smart ESC Spektrum® Firma™ 4074 2050Kv Brushless Motor with Safe-D pinion gears New electronics module New mechanical handbrake feature Fresh street body look with matte gloss effect designs Tunable wing for customizing the downforce Full-width front splitter balances downforce distribution Rear diffuser increases downforce and grip for cornering faster and with confidence Adjustable front and rear body mounts 3mm Plate, 6061-T6 anodized aluminum chassis Center brace for maximum durability Heavy-duty drivetrain with durable steel driveshafts throughout High-speed center driveshaft support Rubber-shielded bearings All-metal diff outdrives and gearbox internals Updated internal gears with new tooth profile for increased strength Lower internal gear ratio to reduce the center line transmission RPM, reducing center drive shaft resonance and increasing drivetrain durability Oil-filled, adjustable, anodized aluminum shocks Black-anodized aluminum front and rear shock towers Waterproof receiver box (For details on waterproof standards, please refer to the product instruction manuals) Large battery trays 5-spoke wheels Durable wheel hubs dBoots® Hoons™ all-road tires 2-year limited warranty (see manual for details) Specifications: Approximate Assembly Time: Less than an hour Ball Bearings: Full set Battery: Sold Separately Battery Tray Dimensions: 5.45 x 1.83 x 1.38 in (138.5 x 46.5 x 35mm) Body: INFRACTION, Screen printed, Decaled, Trimmed Brakes: Metal disc with metal pads Bushing Material: Metal Charger: Sold Separately Chassis: 0.12 in (3mm) Plate, 6061-T6 Aluminum Completion Level: Ready-To-Run Differential: Three oil-filled metal gear Drivetrain: 4WD Drive Type: Forward/Brake/Reverse Final Drive Ratio: 8.58:1 Front Track: 12.13 in (308mm) Power Type: Electric Gear Pitch: 1.0MOD Ground Clearance: 0.59 in (15mm) Internal Gear Ratio: 2.8:1 Max Battery Dimensions: 5.5 x 1.85 x 1.5" (140 x 47 x 38mm) Motor Type: Brushless - Sensorless Pinion: 15T Product Height: 7.87" (200 mm) Product Length: 27.36" (695 mm) Product Weight: 11lbs (4990g) Product Width: 12.2" (310 mm) Radio: Included Rear Track: 12.01 in (305mm) Receiver: Included Scale: 1/7 Servos: Included Shock Type: 3.03 in (77mm) FR, 3.43 in (87mm) RR. aluminum body, oil-filled Speed Control: Included Spur Gear: 46T Suspension: Independent Vehicle Type: On-Road Wheelbase: 15.98 in (406mm) Includes: (1) 1/7 ARRMA® INFRACTION™ Resto Mod Street Bash 6S BLX 4WD RTR (1) Spektrum® Firma™ 150A Smart ESC (installed) (1) Spektrum® Firma™ 4074 2050Kv Brushless Motor (installed) (1) ARRMA® ADS-15M Waterproof* Servo (installed) (1) Spektrum® SPMS650 Waterproof* Brake Servo (installed) (1) Spektrum® SR6110AT AVC Receiver (installed) (1) Spektrum® DX3™ DSMR® Radio (1) Product Manual Needed to Complete: (2) 2S or 3S LiPo batteries Compatible charger Safe LiPo charging bag (4) AA transmitter batteries This product was added to our catalog on April 1, 2021
$649.99
Tamiya TAM58661-60A, Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck Kit
TAM58661-60A, Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck Kit The Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck is a scale recreation of the full size Buggyra Racing Fat Fox truck piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. The realistic 3-piece body is made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: 1/14 scale R/C model assembly kit The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models Includes 540-Type Brushed motor Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Length: 420mm Width: 187mm Height: 188mm Needed to Complete: 2 channel radio system Steering servo Polycarbonate paint for body 7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.) Compatible Battery Charger This product was added to our catalog on August 25, 2022
$164.99
Traxxas TRA9863, Traxxas Wire Harness Led Lights (Fits TRA9862)
TRA9863, Traxxas Wire Harness Led Lights (Fits TRA9862) This product was added to our catalog on November 2, 2023
$12.99
Traxxas TRA9838, Traxxas Push bar, bumper, chrome (assembled) (fits #9836 bumper)
TRA9838, Traxxas Push bar, bumper, chrome (assembled) (fits #9836 bumper) This product was added to our catalog on September 7, 2023
$10.00
KYOSHO KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2)
KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2) Kyosho Fazer MK.2 TC Universal Swing Shaft S. These optional swing shafts are intended for the Kyosho Fazer MK.2 chassis. Using these will allow for for an increase in drive train efficiency. Package includes two swing shafts, two retaining clips and two inserts. This product was added to our catalog on October 8, 2021
$44.99
KYOSHO KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set
KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set The Kyosho Fazer Mk2 TC Aluminum Shock Set is the perfect upgrade for your Fazer. Featuring threaded aluminum shock bodies these will allow for fine tuning and be more consistent than the factory plastic shocks. Package includes two complete shocks for the Kyosho Fazer Mk2. This product was added to our catalog on May 21, 2021
$39.99
ARRMA ARA7116V2, Arrma Limitless V2 1/7 Scale Speed Bash Electric 4WD All-Road Roller
ARA7116V2, Arrma Limitless V2 1/7 Scale Speed Bash Electric 4WD All-Road Roller Using an optimized 8s power layout this V2 Limitless offers next level performance for the ultimate in speed and power. Able to run the full size 1/4 mile run in the 8 second range this vehicle is extremely capable. Coming as a pre-assembled roller you have the option to choose your own electronics giving you the ability to go from mild to wild in the power department. With a sleek design, 8s capable drivetrain and outrageous top speed capabilities the updated Limitless V2 offers a driving experience like no other. This model is capable of an incredibly high rate of speed, and it is not recommended for inexperienced drivers. Previous experience with high-power radio controlled models is highly recommended. This model is not intended for use by children or minors younger than 16 years old. Individuals younger than 16 years old require responsible adult supervision during operation and maintenance. Additionally, when driving this model up to a 1/4 mile of traffic free, uninterrupted driving area could be required. The space in which you choose to drive should based on the setup of the model, and the potential top speed of the car. Updated Features Include: Easy-access sliding motor mount accepts larger diameter motors 3mm Chassis plate repositions the motor mount to also accept longer motors 39T Mod 1.0 Spool with long rear outdrive combines with a shorter rear center driveshaft to reduce drivetrain vibration Easy-access electronics module accepts larger ESCs and includes a waterproof* receiver box Safe-D input cups are included on the front and rear gearboxes GP5 gears have a lower ratio for reduced centerline drivetrain speed and vibration Wider rear track increases stability Stiffer front springs and sway bar improve high-speed handling The first ARRMA “Rattle Can Roller” includes a clear, low-drag body for your own unique paint scheme — window mask and decals are provided Specifications: Product Length: 28.74" (730mm) Product Width: 12.28" (312mm) Product Height: 6.5" (165mm) Product Weight: 8.6lb (3.9kg) Front Track: 12.2" (310mm) Ground Clearance: 0.59" (15mm) Inner Tire / Outer Wheel Diameter: 3.27" Wheel Width: 1.69" (43mm) Internal Gear Ratio: 2.8:1 Spur Gear: 39T Differential: Two Oil-Filled Metal Gear Diffs Drivetrain: 4WD Shock Type: 3.03" (77mm) FR, 3.43" (87mm) RR. Aluminum Oil-Filled Tire Compound: White Wheel Hex Size: 17mm Tire Tread: Hoons Vehicle Type: All-Road Approximate Assembly Time: 1-3 Hours Body: LIMITLESS. Supplied Clear & Trimmed. Decal Sheet Included. Brakes: Integral with ESC (ESC Sold Separately) Scale: 1/7 Includes: (1) ARRMA® LIMITLESS 1/7 Scale All-Road Speed Bash Roller (1) Customizable Clear Body and Nose Cone (1) Decal Sheet (1) Window Mask Sheet (1) Product Manual Needed to Complete: (1) 2+ Channel Transmitter and Receiver (1) Metal Gear, Hi-Torque Steering Servo (23T Spline, Standard Size) (1) Electronic Speed Control (8S recommended) (1) Motor (50 Series – Max dimensions 4.33X1.97") (2) 4S LiPo Battery (1) Compatible LiPo Battery Charger (1) Mod 1 Pinion Gear (to suit chosen motor) This product was added to our catalog on September 17, 2022
$429.99
Traxxas TRA9786, Traxxas Front LED Wire Harness (TRX-4M)
TRA9786, Traxxas Front LED Wire Harness (TRX-4M) Traxxas Front LED Wire Harness. This is a replacement wire harness for the Traxxas TRX-4M. Package includes one LED harness and two zip ties. This product was added to our catalog on February 14, 2023
$6.00
PROTOform PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)
PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) This is the 190mm Protoform Cadillac ATS-V.R Clear Touring Car Body. Cadillac Racing stormed back into the motorsports spotlight in 2015 with their factory-works ATS-V.R race car, the third generation of V-Series race cars. Built to international FIA GT3 specifications, this pedigree allows it to potentially run in more than 30 different GT series around the world. The ATS-V.R has proven a success with top drivers Johnny O’Connell and Andy Pilgrim at the wheel, scoring multiple overall wins and pole positions in the World Challenge series. PROTOform is proud to bring the racing heritage of Cadillac back to 1/10 190mm Touring Cars with our officially-licensed rendition of the Cadillac ATS-V.R. With every detail of the full-scale race car captured and an extensive decal sheet, racers will appreciate the ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. This 2-door coupe race body is formed from genuine .030” lexan and includes injection-molded wing struts to support a unique rear wing design. The wing features 2 different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the PROTOform ATS-V.R suitable to any kind of GT-class rules. As always, wing mounting hardware, and paint-then-peel overspray film are included. Features: Made with Genuine GE .030 lexan Replica body of the factory-works Cadillac Racing GT3-spec race car Molded wing struts and dual-trim wing design Officially-licensed by General Motors Proudly Made in the USA Specifications: Length: 17.5" (445mm) Width: 7.63" (194mm) Height: 4.29 (109mm) Wheelbase: 10.2" (258mm) Includes: Clear Cadillac ATS-V.R body (2) Molded nylon wing struts Mounting hardware Extensive decal sheet Paint-then-peel over spray film, & window masks This product was added to our catalog on July 16, 2021
$35.99
Xpress XP-10494, Xpress Aluminum Lowered High Lock Steering Post
XP-10494, Xpress Aluminum Lowered High Lock Steering Post This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post. It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install the steering arms flipped over compared to the stock kit. This allows for more steering lock and gets more aggressive handling! Feature: For: Xpress Execute touring Series Material: Aluminum Color: Red Include: Aluminum Lowered High Lock Steering Posts (2 pcs) This product was added to our catalog on November 4, 2023
$15.49
Racers Edge RCE3280, Racers Edge 80 Weight, 1,000cSt, 70ml 2.36oz Pure Silicone Shock Oil
RCE3280, Racers Edge 80 Weight, 1,000cSt, 70ml 2.36oz Pure Silicone Shock Oil Racers Edge High Performance Shock Oil is a blend of Premium Silicone that provides consistent performance as well as longevity.
$8.99
Team Associated ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger
ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger The Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751). This buggy was engineered using Team Associated's vast knowledge and success in the 1:10 scale 2WD racing category. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, capable and powerful RB10. The RB10 buggy roars to life with a water-resistant high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system and the Drive Vehicle Control (DVR) receiver with a built in gyro. The DVR system is able to be tuned to different settings that will allow for more or less gyro control. The RB10 is equipped with the Reedy metal-gear, digital high-torque servo, and a water-resistant enclosed receiver box. All of this sits under the outstanding factory-finished off-road buggy body with wing. The RB10 will keep you accelerating and cornering with the included aggressive off-road treaded tires and lightweight 12mm hex wheels. The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track. Features: Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751) 2.4GHz 2-channel radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro High-torque, metal-gear Reedy servo with spring style servo saver Powerful Reedy 3300kV brushless motor Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff Water-resistant, enclosed receiver box Factory-finished off-road buggy body and wing, with two color schemes to choose from (blue and red) Off-road buggy race car-inspired dish wheels High-grip, off-road tires with aggressive tread pattern Aluminum 12mm big bore coil-over shock absorbers Durable and lightweight aluminum top shaft Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs Rear CVA driveshafts for more durability 2.6:1 ratio gearbox with heavy-duty sealed gear differential and extremely adjustable slipper clutch Rugged steel turnbuckles for adjustable camber and front toe-in Adjustable suspension geometry Vertical ball ends for roll center adjustments, front and rear Metric hardware throughout 22 precision rubber-sealed ball bearings Many Factory Team options already available! Specifications: Scale: 1:10 Power Source: Electric Terrain: Off-Road Body Style: Buggy Assembly Level: Assembled Power: Electric Length: 400mm (15.75”) Width: 248mm (9.76”) Wheelbase: 277.8mm (10.94") Weight: 1405g (3.1lb) Drive: 2WD Transmission Ratio: 2.6:1 Includes: (1) Team Associated RB10 RTR 2WD Buggy (1) 2.4GHz 2-channel Radio (1) Reedy Charger (1) Reedy 2S Lipo Battery Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on May 11, 2023
$329.99
Traxxas TRA9793-BLUE, HEAT SINK TITAN 87T MOTOR, BLUE
TRA9793-BLUE, HEAT SINK TITAN 87T MOTOR, BLUE
$10.00
Traxxas TRA9745X, Traxxas TRX-4M Complete Ball Bearing Set (22)
TRA9745X, Traxxas Ball Bearing Set Black Rubber Sealed Traxxas TRX-4M Complete Ball Bearing Set. This optional bearing kit replaces the stock bushings in the TRX-4M rock crawler. Ball bearings provide smooth long lasting performance and reduce power robbing friction. Includes: (8) 3x6x2.5mm (4) 5x8x2.5mm (4) 4x8x3mm (2) 8x12x3.5mm (4) 3.5x7x2.5mm This product was added to our catalog on May 23, 2023
$39.99
Castle Creations CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV)
CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV) COMPATIBILITY: Arrma Felony 6S BLX Arrma Infraction 6S BLX Arrma Infraction V2 6S BLX Arrma Limitless Arrma Outcast 8S BLX The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before. Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine! When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles. Features: ESC: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty Motor: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs Specifications: ESC: Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (with no battery connector): 5.75 oz. (163 grams) Connectors: 6.5mm female bullets for motor connection. Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. Motor: Input Voltage Range: 3S-8S LiPo Kv: 1650 Max. RPM: 56,000 Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm) Weight (w/wires): 21.08oz. /597.6g Shaft Diameter: 5mm Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter Cooling Fan: Not available Connectors: 6.5mm male connectors Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo. Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™ ESC Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Tech Notes: This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo. Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Includes: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide This product was added to our catalog on June 23, 2021
$399.99
Traxxas 77097-4, Traxxas X-Maxx Ultimate 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM
77097-4, Traxxas X-Maxx Ultimate 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM The Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck brings the same unrelenting 4X4 power, mammoth size and award-winning innovation to the game that make X-Maxx the ultimate monster truck. When you add 30+ volts of extreme 8s power, X-Maxx 8S defies physics, unleashing jaw-dropping acceleration and 50+mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough™. Traxxas engineers tossed conventional thinking out the window to bring loyal X-Maxx owners the most powerful Traxxas Monster ever developed. X-Maxx 8s is packed with 8s rated components engineered to handle the brutal torque and incredible speed. The Torque-Biasing Center Drive unit distributes the power for maximum wheels-up punch and unrelenting acceleration. Full steel-gear driveline, larger driveshafts, larger main bearings, strengthened bulkhead, heavy-duty ring and pinion gears, dual-fan motor cooling and more make this X-Maxx the ultimate monster. X-Maxx 8S Features: 30+ Volts of Extreme 8S Power Maxx Duty Drivetrain Torque-Biasing Center Drive 50+ MPH Out of the Box Specifications: Length: 29.84 inches (758mm) Front Track: 22.26 inches (540mm) Rear Track: 20.66 inches (525mm) Ground Clearance: 4 inches (102mm) Weight: 19.1lbs (8.66kg) Height (ride): 13.79 inches (350mm) Wheelbase: 18.92 inches (480mm) Skill Level: 6 Battery Tray: 197mm x 51.5mm x 44mm Needed To Complete: (4) "AA" Batteries (for transmitter) (2) 3S or (2) 4S LiPo Battery w/Traxxas iD Connector Compatible Battery Charger This product was added to our catalog on December 18, 2021
$1,499.99
You have seen 48 out of 531 products