By mAh
ProTek RC PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh)
PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh) The ProTek R/C 2S 100C Si-Graphene + HV LiPo Stick Pack Battery is built using a hard plastic case that is the same dimensions as a standard NiMH stick pack. This makes them a great choice for Tamiya TCS Series racing, including Euro Truck, all GT classes, M-Chassis and Formula One - as well as Euro Truck Racing League. Plus, its a great choice for any chassis that will accept a 6 cell NiMH stick pack. Weighing in at 235 grams, this Si-Graphene + HV battery weighs less than a standard 5000mAh LiPo battery of the same configuration - making your car lighter and faster! When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, increased run time, increased cycle life and increased voltage - but Graphene + 100C LiPo batteries take that a step further with more power and lower internal resistance when compared to the previous ProTek LiHV Graphene packs! This provides more runtime, and a dramatic increase in voltage and punch over the course of a run. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries, Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 100C discharge ratings, incredibly high charge rates and huge variety of models to choose from, ProTek R/C 100C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Perfect for Tamiya TCS Series racing Hard case is the same dimensions as a standard NiMH stick pack Lighter than a hardcase 2S LiPo pack of equal capacity Improved power to weight ratio and a lower overall CG More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage Factory installed T-style plug NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 7.6V nominal Capacity @7.4V 5000mAh Capacity @7.6V 5400mAh Weight 235 g Connector Type T-style Balance Connector 3 Pin XH Number of Cells 2 Cell Configuration 2S1P Dimensions (WxLxH) 46.7x137.5x24.2mm Maximum Charge Rate 10C (50A) Burst Current 100C Watt Hour @7.6V 38Wh Includes: (1) ProTek R/C Battery LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: DO NOT leave the battery in your model when charging DO NOT leave unattended when charging ALWAYS balance charge the battery ALWAYS use a LiPo charging bag YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on April 16, 2021
$76.99
PowerHobby PHB2S6000120CBULLET, 2S 7.6V 6000mah 120C Graphene + HV Lipo Battery Bullet Deans Plug 120C Continuous / 240C Burst
PHB2S6000120CBULLET, 2S 7.6V 6000mah 120C Graphene + HV Lipo Battery Bullet Deans Plug 120C Continuous / 240C Burst Perfect for 1/10 & 1/8 scale vehicles, Boats, Planes, Drones. When you want a powerful battery pack that you can depend on even when you push it to its limits, this 2S 6000mah 120C LiPo Battery is for you. Powerhobby Power Pro Series lipo batteries offers very high power and very long run time for your RC models. The 240C burst rate enhances your driving experience no matter what type of driving you are into.These batteries packs are made with superior Lithium Polymer raw materials. The advanced stacking technology enables a single cell of capacity to reach 6000mah. Powerhobby Power Pro Batteries are your ideal choice for your RC Applications. Application(s): 1/10 / 1/8 scale cars, trucks, and buggies, dronesIncludes : 1 Battery Specifications: Discharge Connector: Deans Balance Connector: JST-XH Lenth : 134.5mm Width : 47mm Height: 25mm Weight: 10 Ounces This product was added to our catalog on July 30, 2021
$64.99
ProTek RC PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved)
PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 4200mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 170 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage 5mm bullets and 5mm to 4mm bullet adapters included NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 7.6V Capacity @7.4V 4200mAh Capacity @7.6V 4800mAh Weight 170g Connector Type 5mm Bullet Balance Connector 2mm Bullet Number of Cells 2 Cell Configuration 2S1P Dimensions (WxLxH) 47x96x20mm Maximum Charge Rate 10C (48A) Burst Current 130C Watt Hour @7.6V 36.5 Wh Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector This product was added to our catalog on May 21, 2023
$59.99
PowerHobby PHB2S9000120CDNS, 2S 7.6V HV + Graphene 9000mAh 120C LiPo Battery with Hardwired T-Plug, 120C Continuous / 240C Burst
PHB2S9000120CDNS, 2S 7.6V HV + Graphene 9000mAh 120C LiPo Battery with Hardwired T-Plug, 120C Continuous / 240C BurstPerfect for 1/10 & 1/8 scale vehicles, Boats, Planes, Drones. When you want a powerful battery pack that you can depend on even when you push it to its limits, this 2S 9000mah 120C LiPo Battery is for you. Powerhobby Power Pro Series lipo batteries offers very high power and very long run time for your RC models. The 120C burst rate enhances your driving experience no matter what type of driving you are into.These batteries packs are made with superior Lithium Polymer raw materials. The advanced stacking technology enables a single cell of capacity to reach 9000mah. Powerhobby Power Pro Batteries are your ideal choice for your RC Applications. Includes : 1 Battery Application(s): 1/10 / 1/8 scale cars, trucks, buggies, Truggies Discharge Connector: DEANS Balance Connector: JST-XH Features: Length : 138 mm Width : 47mm Height : 25.1 mm Weight : 12.4 Ounces Suggested Charge Rate : 2C This product was added to our catalog on October 14, 2021
$85.00
PowerHobby PHB2S4200120CSHORTY, 2S 7.6V HV + Graphene 4200mah 120c Shorty Lipo Battery
PHB2S4200120CSHORTY, 2S 7.6V HV + Graphene 4200mah 120c Shorty Lipo BatteryThis hard case car pack was designed with racers in mind.Application(s): 1/10 / 1/8 scale cars, trucks, buggies, Truggies Features: Hard Plastic Case 4mm female bullet connectors for positive (+) and negative (-) terminals 2mm terminal for balancing "Shorty" configuration allows racers to alter the weight distribution by shifting battery position in tray Suggested Charge Rate : 2C Specifications: Discharge Connector: DEANS Balance Connector: JST-XH Length : 96 mm Width : 47mm Height : 18.5 mm Weight : 5.6 Ounces
$50.99
ProTek RC PTK-5102-22, ProTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/5000mAh) w/5mm Connectors (ROAR Approved)
PTK-5102-22, ProTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/5000mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 5000mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 207 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage 5mm bullets and 5mm to 4mm bullet adapters included NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 7.6V Capacity @7.4V 4500mAh Capacity @7.6V 5000mAh Weight 207 g Connector Type 5mm Bullet Balance Connector 2mm Bullet Number of Cells 2 Cell Configuration 2S2P Dimensions (WxLxH) 47x96x25mm Maximum Charge Rate 10C (50A) Burst Current 130C Watt Hour @7.6V 38.0 Wh Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: DO NOT leave the battery in your model when charging DO NOT leave unattended when charging ALWAYS balance charge the battery ALWAYS use a LiPo charging bag YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on January 24, 2022
$79.99
ProTek RC PTK-5115-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG LiPo Battery (7.6V/6300mAh) w/5mm Connectors (ROAR Approved)
PTK-5115-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG LiPo Battery (7.6V/6300mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 6300mAh LiPo Battery is the perfect battery option for anyone looking for a lightweight and high capacity LiPo battery. Weighing only 271 grams, this 2S pack is lighter than a standard 2S pack, with much higher capacity. These advancements lead to increase in both voltage and punch throughout a run. This battery has been designed to improve power to weight ratios while maintaining a low CG. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity Improved power to weight ratio and a lower overall CG More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage 5mm bullets and 5mm to 4mm bullet adapters included NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 7.6V nominal Capacity @7.4V 5500mAh Capacity @7.6V 6300mAh Weight 271g Connector Type 5mm Bullet Balance Connector 2mm Bullet Number of Cells 2 Cell Configuration 2S2P Dimensions (WxLxH) 47x139x22.5mm Maximum Charge Rate 10C (61A) Burst Current 130C Watt Hour @7.6V 47.9 Wh Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: DO NOT leave the battery in your model when charging DO NOT leave unattended when charging ALWAYS balance charge the battery ALWAYS use a LiPo charging bag YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on January 24, 2022
$99.99
ProTek RC PTK-5114-22, ProTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/6400mAh) w/5mm Connectors (ROAR Approved)
roTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/6400mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 6400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 219 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on January 2, 2024
$99.99
Gens Ace GEA60002S13L5, 7.6V 6000mAh 2S 130C HV Lipo: 5.0mm BULLET
GEA60002S13L5, 7.6V 6000mAh 2S 130C HV Lipo: 5.0mm BULLET Features Stable automatic stacking technology enables single cell capacities of 6000mAh. The most strict single cell capacity, voltage, resistance, discharge curve matching process. Superior Lithium Polymer raw materials. Standard 5.0mm bullet Overview Gens Ace Redline Series 2S 130C 6000mAh Hardcase LiPo Battery Pack with 5.0mm bullet. Gens Ace is the name you can trust to deliver dependability and high performance. The Gens Ace 130C 2S 6000mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect from all Gens ace RC car lipo batteries. Product Specifications Application Surface Battery Capacity 6000-6999mAh Battery Type HV-LiPo (3.8V per cell) Battery Voltage 7.6V Capacity 6000mAh Connector Type 5mm Bullet Hard Case Yes Maximum Burst Discharge Rate 260C Maximum Continuous Discharge Rate 130C Number of Cells 2 Product Height 0.86" (22 mm) Product Length 5.47" (139 mm) Product Weight 9.62oz (273g) Product Width 1.85" (47 mm) Watt Hours 45.6
$79.99
Gens Ace GEA82002S13D5, Gens Ace Redline 2s LiHV LiPo Battery 130C w/5mm Bullets (7.6V/8200mAh)
GEA82002S13D5, Gens Ace Redline 2s LiHV LiPo Battery 130C w/5mm Bullets (7.6V/8200mAh) This is a Gens Ace 2S 130C 8200mAh Redline LiHv LiPo Battery. GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Features: Stable automatic stacking technology enables single cell capacities of 8200mAh. The most strict single cell capacity, voltage, resistance, discharge curve matching process. Superior Japan and Korea Lithium Polymer raw materials. Standard 5.0mm bullet Specifications: Capacity: 8200mAh Voltage: 7.6V Discharge Rate: 130C Max Burst Discharge Rate: 260C Weight: 298g Size: 138mm x 46mm x 25mm (L x W x H) Connector Type: 5.0mm bullet This product was added to our catalog on August 15, 2021
$99.99
Spektrum SPMX52S120HT, 5000mAh 2S 7.6V Smart Pro Race HV LiPo 120C: 5mm
Podium-level Performance Spektrum™ Smart Technology is proud to introduce our lineup of Smart LiPo batteries with specially formulated LiPo High Voltage Chemistry designed to provide consistently higher voltage throughout the entire run of the battery under even the most extreme amperage loads. The extremely high discharge ratings, new exclusive Pro Series LiPoHV chemistry, and Smart's added benefits are game changers for the RC racing community. The Spektrum Smart Pro-Series LiPoHV batteries are class leading LiPo cells with an innovative graphene polymer giving extremely low Internal Resistance (IR) ratings, providing optimum speed and power to the motor and ESC that pro-level racers demand while giving drivers the worry-free benefits of Spektrum Smart Technology. Available in all popular sizes and configurations for 1/10 and 1/8th scale racing models, drivers get top-of-the-line LiPo performance with the added benefits of Smart, guaranteeing successful races with each pack cycle, lap after lap, and heat after heat. Smart Pro-Series battery's benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. When a Smart Pro-Series LiHV Battery is connected to a Spektrum Smart charger, its unique charging parameters and health information are uploaded to the charger from its integrated memory microchip. You can view and set preferences through the charger, such as charge rates, so all that’s required to charge the pack is connecting it to your Smart charger. Smart technology takes care of the rest. Spektrum Smart Pro-Series surface batteries store a wide variety of essential information, including: Battery Brand Battery Type Battery Capacity Battery C Rating Individual Cell Voltage Battery Temperature Charge/Discharge Cycles Spektrum Smart Pro-Series surface batteries also maintain an error log, including over-heat, over-discharge, and over-charge incidents. This data can help assure that the battery you've chosen is suitable for the application. Innovative Spektrum Smart Pro-Series surface batteries are so easy to use that they nearly take care of themselves. Smart technology makes it easy to achieve peak battery performance, reliability, and longevity! Features Simpler and safer to use Shorter, more compact design helps promote a low center of gravity High Voltage Capable Powerful and consistent 120C Discharge Rate Industry leading graphene LiPoHV battery chemistry High-performance 5C max Charge rate for super-fast charge times without damaging the health of the pack Can be charged on any non-Smart charger with included adapter Automatic Charging on Spektrum Smart charger reduces time in the pits High-capacity packs in Shorty style and standard sizes versus original/previous generation Spektrum Race batteries Double-sided main connector for added user-friendliness featuring flush mount bullets New and improved design - extreme durability case with improved balance/Smart port connector
$79.99
ProTek RC PTK-5130-21, ProTek RC 2S Slim 120C Low IR Si-Graphene + HV LiPo Battery (7.6V/5700mAh)
PTK-5130-21, ProTek RC 2S Slim 120C Low IR Si-Graphene + HV LiPo Battery (7.6V/5700mAh) This product was added to our catalog on December 16, 2021
$99.99
