Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.
Check out the rest of our micro frames and the rest of our BetaFPV gear!
Features
HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.
Pavo Pico Frame Kit
We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.
And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.
DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.
Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:
The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.
Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller's rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop.
Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:
Specification
Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3
Includes
1x BetaFPV Pavo Pico HD 81mm Cinewhoop Frame (HD Digital Version) - Black
The Pavo25 frame in a multitude of colors to transform your Pavo25 to be your own!!
Check out all of our frames, and the rest of our BetaFPV gear!
Features
With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pavo25 frame sports a reasonable structure assembly design that is optimized to decrease complex components, making the build easy.
Made of high-quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, the Pavo25 frame optimizes the vibration damping structure for the camera mount, allowing pilots to get an excellent experience.
An innovative pusher frame with a duct design. It generates more lift for the whole quadcopter, improving the ability of endurance and propulsion.
Equipped with a CNC Vista Adapter. It effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX.
Specifications
tem: Pavo25 Frame Kit
Wheelbase: 108mm
Color: Black/Transparent Grey/Yellow/Blue/Purple
Material: PA12
Frame Color: Black, grey, yellow, blue, purple
Weight:31.5g (without carbon fiber)
Body Size: 153.2x153.7mm (without EVA adhesive foam)
Top plate thickness: 2.5mm
Propeller size: 2.5-inch
FC pattern: 25.5x25.5mm
FPV cam spacing:14mm
Includes
1x BetaFPV Pavo25 2.5" Cinewhoop Frame Without Carbon
All batteries must be shipped by a ground shipping method.
Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop.
Easy to carry on and ready to fly. What are you waiting for?
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
3 Flight modes
Altitude hold and emergency landing functions
Storage case
FrSky D8 protocol drone and radio
Brushed drone, easy to fly
Specifications
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW
Camera tilt degree: 25°
Camera: C01 FPV Micro Camera
Transmitter: Literadio2 SE Transmitter
TX mode: Mode 2 (Left stick throttle)
Goggles: VR02 Goggles
Motor: 716-19000KV Brushed motor
Propeller: 31mm 4-blade 0.8mm shaft hole
Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Brushed Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 300mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
4x 31mm 4-Blade Props
1x Portable Storage Bag
User Manual
All batteries must be shipped by a ground shipping method.
The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 450mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV.
Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight.
Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry.
Specifications
BetaFPV LiteRadio 2
Frequency Range: 2.4GHz (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: Type-C
BetaFPV VR02 Goggles
Screen Size: 4.3"
Screen Resolution: 800x480p
Screen Brightness: 300cd/m2
Field of View: 55°
Charging Port: USB-C
Input Voltage: 3.7V 500mA
Internal Battery: 3.7V 2000mAH
Dimensions: 143x126x86.3mm
Weight: 300g
BetaFPV RTF Cetus Pro
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
VTX: 25mW
Camera tilt degree: 25°
Camera: C02 FPV Micro Camera
Propeller: 40mm 3-blade 1.5mm shaft hole
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Pro Brushless Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 450mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
1x Portable Storage Bag
All batteries must be shipped by a ground shipping method.
Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection!
Features
Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level.
Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon.
Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind.
The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market.
The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment.
Powerful Propulsion System
Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience.
Recording Every Flight Moment
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.
Improved Video Transmission
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera.
LiteRadio 3 Radio Transmitter
This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you.
FPV Simulator Supported
First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here.
Various Modes, Accessible to All
Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one.
BETAFPV Cetus Series
The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots.
Specification
Item: Cetus X FPV Kit
Weight: 55g
Wheelbase: 95mm
FC: F4 1S 12A FC
Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus)
VTX: M04 25-400mW VTX
Quadcopter: Cetus X Brushless Quadcopter
Transmitter: LiteRadio 3 Radio Transmitter
Goggles: VR03 FPV Goggles
Battery: 2x BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Includes
1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver)
1x LiteRadio 3 Transmitter (ELRS 2.4G)
1x BETAFPV VR03 FPV Goggles
4x BT2.0 450 mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C to FC Adapter
1x Prop Removal Tool
4x Gemfan 2020 4-Blades Prop (Spare Set)
1x Portable Storage Bag
FAQ
For more info and instructions, please check the User Manual for Cetus X FPV Kit.
Please DO NOT configure ESC or Motor settings on the Betaflight configurator.
The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function.
The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.
This case is designed for carrying a 65-75mm drone, it is made of EVA material, which is sturdy, durable and waterproof(except zipper part). Come with ample space for storing canopy, props, chargers, and batteries, etc. With this case, you're ready to grab your gear and go flying whenever you want, without having to carry around a bunch of different containers.
Check out all our whoop gear and our BetaFPV selection!
Features
Come with a sturdy and durable EVA material, this case is water-proof(except zipper part) and resistant to impact damage.
Ample space for storing the canopies, props, chargers, and batteries, etc.
Built-in grid space, easy to store the small accessories.
Wide-applicability, this case can not only suit for BETAFPV Meteor series/65X/65S and other whoop drones, it is also suitable for most brands 65/75mm FPV drones.
Come with an exquisite gift, specially offered some cool stickers, more fun for FPV flight.
Specifications
Color: Black
Weight: 100g
Size: 12*12*7mm
Material: EVA
Includes
1x BetaFPV Storage Case for 65/75mm Micro Drone
These screws and rubber dampers are really useful for mounting your Whoop / Toothpick FC.
Check all our whoop frames & accessories and the rest of our BetaFPV selection!
Specifications
M1.2* 4 screws fit for stock Blade Indcutrix frame / 65mm frames.
M1.4* 5 screws fit for Eachine black E010 frame / 75mm / 85mm frames.
Black rubber dampers has a gap of 0.8mm, suitable for ALL brushed FC boards.
White rubber dampers has a gap of 1.2mm, suitable for 2S AIO FC boards, F405 FC stack etc.
Blue rubber dampers has a gap of 1.8mm, suitable for 2-4S AIO FC boards.
Includes
20x M1.2* 4 screws
20x M1.4* 5 screws
20x Black rubber dampers
20x White rubber dampers
20x Blue rubber dampers
BFPV-00313881, BetaFPV Cetus FPV RTF Drone Combo Kit
The Cetus FPV Kit offers an exceptional opportunity for FPV beginners to explore the thrilling world of First-Person-View flying. This all-inclusive kit, comprising the Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, brings everything you need for an immersive FPV experience. The auxiliary flight function makes it a breeze for everyone to take to the skies, greatly reducing the learning curve for newcomers. With three distinct flight modes Normal, Sport, and Manual, with three speed settings, the Cetus FPV Kit can cater to a wide range of pilot preferences and flight environments.
The Cetus quadcopter features an altitude hold function that simplifies flying and ensures stable indoor hover, thanks to an accurate barometer and laser system. Additionally, it boasts self-protection mechanisms for emergency landings and automatic motor disarming in the event of a collision. The LiteSilver system within the quadcopter integrates Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor for optimal performance.
The LiteRadio2 SE transmitter, with its built-in 1000mAh 1S battery, offers an impressive 8-hour endurance, making it ideal for extended flight sessions. The VR02 FPV Goggles provide an immersive FPV experience, featuring high-quality antennas for clear, stable reception, ergonomic design for comfort, and simplicity of operation. The Cetus FPV Kit is the perfect entry point into FPV flying for beginners and a robust choice for enthusiasts.
Features:
Perfect for indoor fun
3 Flight modes Normal, Sport, and Manual Mode
Self-developed LiteSilver System
Self-protection Function
Auto hold hovering
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
Specifications:
Weight: 1.23oz (35g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25mW
Camera: CO2 FPV Micro
Goggles: VR02
Propeller: 31mm 4-Blade w/0.8mm Shaft
Motor: 716-19000KV Brushed Motor
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus FPV Kit
(1) LiteRadio2 SE Transmitter
(1) VR02 FPV Goggles
(1) CO2 FPV Micro Camera
(2) BT2.0 3.7V 300mAh 1S Lipo Battery
Charger and voltage tester
(4) Spare 31mm 4-Blade props
(1) Portable storage bag
Needed to Complete:
Everything you need is included
This product was added to our catalog on October 21, 2023
BFPV-01020005_2, BetaFPV Cetus X FPV RTF Drone Combo Kit w/BetaFPV Cetus Flight Controller
The Cetus X FPV Kit is designed for both seasoned pilots and newcomers, offering an advanced 2S power whoop bundle that propels your FPV experience to new heights. Comprising the Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, it's a complete package to elevate your FPV game. With the inclusion of the latest BT2.0 450mAh 1S Battery, you'll enjoy extended flight times and higher discharge rates.
This kit unlocks a new level of control and flying experience, featuring unparalleled control and extended radio and video transmission. It's a fantastic entry point for beginners to dive into the world of FPV, thanks to its accessibility and potential for growth. The Cetus X offers a variety of flight modes and speeds to suit different pilot preferences and flight environments
The FPV kit combines cutting-edge components, including the Betaflight FC for powerful flight control, and The VR03 FPV Goggles are equipped with DVR recording, allowing pilots to capture and relive their most exciting moments. The Cetus X Brushless Quadcopter, combined with the advanced components in this kit, provides you with an outstanding FPV experience that's hard to match.
The LiteRadio 3 SE transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 3 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots.
Features:
Perfect for indoor fun
Flight modes Normal, Sport, and Manual Mode
Turtle Mode makes crash recovery a breeze
Self-developed LiteSilver System
Auto hold hovering
Powerful 2S compatibility
Tilt Camera
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam
Specifications:
Wheelbase: 3.74in (95mm)
Weight: 1.94oz (55g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25-400mW M04
Camera: CO4 FPV Micro
Goggles: VR03
Propeller: Gemfan 2020 4-Blades
Motor: 1103-1100KV Brushless Motors
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus X FPV Kit
(1) LiteRadio 3 SE Transmitter (Frsky)
(1) VR03 FPV Goggles
(1) CO4 FPV Micro Camera
(4) BT2.0 3.7V 450mAh 1S Lipo Battery
Charger and voltage tester
(4) Spare Gemfan 2020 4-Blades
(1) Portable storage bag
Needed to Complete:
Everything you need is included
This product was added to our catalog on October 21, 2023
BFPV-01020010_5, BetaFPV Cetus Lite FPV RTF Drone Combo Kit
The Cetus Lite FPV Combo is your gateway to the exciting world of FPV flying. This ready-to-fly kit is perfect for beginners, offering a safe and thrilling experience for both kids and adults. It features an auxiliary altitude hold function, making it easy for users to control and navigate. The durable frame, constructed from impact-resistant PA12 material, is equipped with a protective guard, ensuring safe flights indoors and outdoors.
With the high-efficiency BT2.0 300mAh 1S battery, you can enjoy flights lasting around 4-5 minutes, and swapping batteries is a breeze. The Cetus Lite also includes a low-voltage prompt function to protect your battery. Automatic calibration simplifies your flying experience, ensuring stability every time you take off. With the Altitude Hold feature and the LiteRadio 1 transmitter, even newcomers can effortlessly control the quadcopter's height, while the included VR02 goggles provide an immersive FPV experience.
The LiteRadio 1 transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 1 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots.
Features:
Perfect for indoor fun
Auto disarming upon collisions
Auto hold hovering
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam
Specifications:
Length: 3.5in (90mm)
Width: 3.3in (85mm)
Height: 1.7in (45mm)
Weight: 1.26oz (36g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25mW
Propeller: 31mm 4-Blade w/0.8mm Shaft
Motor: 716-19000KV Brushed Motor
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus Lite
(1) LiteRadio Transmitter
(1) VR02 FPV Goggles
(1) Cetus Lite Camera and VTX
(2) BT2.0 3.7V 300mAh Lipo Battery
Charger and voltage tester
(4) Spare 31mm 4-Blade props
(1) Spare 716 CCW Motor
(1) Spare 716 CW Motor
Needed to Complete:
Nothing! Everything needed for lift off is included
This product was added to our catalog on October 21, 2023
All batteries must be shipped by a ground shipping method.
The CNHL SpeedyPizza 3.7V 1S 350mAh 75C LiHV Battery - BT2.0. This high-performance battery offers 75C of power, providing you with a reliable and consistent source of energy. Grab 5 slices of BT2.0 power for your whoop today!
Check out our selection of 1S batteries, and all our CNHL products!
Specifications
Capacity: 350mAh
Voltage: 3.8V / 1-Cell / 1S1P
Discharge Rate: 75C Continual / 150C Burst
Charge Rate: 5C Max
Size: 6x11x67mm
Weight: 8g/each battery
Output Connector: BT2.0
Balance Connector: JST / XH
Wire Size (AWG): 22#
Package: 5 pcs CNHL Pizza Series 350mAh 3.8V 1S 75C Lipo Battery with BT2.0
Includes
5x CNHL SpeedyPizza 3.8V 1S 350mAh 75C LiHV Battery - BT2.0
Check out Craftedkwads Odonata HD 2" Frame Kit - dual variant
A micro drone that fits in the palm of your hand, rips like a 5", and shares the incredible vision of a dragonfly.
Fast, silent, and small, the Odonata HD is built for stealth, power, endurance, and fun. Spinning 2" props and a compact 95mm wheelbase, the Odonata HD can be flown anywhere, without sacrificing performance and allowing you to use the systems you love!
Be sure to check out all our 2" frames, and all our Craftedkwads Products.
Features
Supports DJI (Naked Vista)
Supports HDZERO (Whoop Lite)
Supports Avatar (1S Lite VTX)
Supports Analog (Nano VTX)
Specifications
Prop size: 2" (51mm)
Frame weight: 11g
Camera mounting: 14x14 m2 (nano)
Weight: 11g
Electronics mounting: 25.5x25.5 m2 (Bottom Plate), 20x20 m2 (Top Plate)
Motor mounting: Ø6.6mm tri-point m1.4, Ø9mm two-point m2
Systems Supported:
DJI (Stripped Air Unit Lite/Vista/Link)
Avatar (Lite VTX)
HDZERO (Whoop Lite)
Analog (Nano vtx)
Includes
1x Craftedkwads Odonata HD 2" Frame Kit - dual variant
1x Body Plate, 2mm thick Carbon Fiber
1x Top Plate, 1.5mm thick Carbon Fiber
3x m2x20mm standoff, Aluminum
6x m2x6mm screw, Steel
1x Nano Camera Mount Set, TPU
1x Rear Mount, TPU
1x Craftedkwads Sticker
This micro drone boasts remarkable performance, fitting in the palm of your hand while providing the same feel as a 5" craft. The Ironclad works with 2" props and has an approximate 50g dry weight. The Odonata HD combines speed, silence, and a dragonfly's-eye view into one powerful package. This Ironclad ripper is designed to take on heavier builds and larger motors with its 2.5mm thick bottom plate.
Be sure to check out all our 2" frames, and all our Craftedkwads Products.
Features
Palm size
Dragonfly like POV
Ultra light weight
Supports DJI (Naked Vista)
Supports HDZERO (Whoop Lite)
Supports Avatar (1S Lite VTX)
Supports Analog (Nano VTX)
Extra Durable bottom plate
Specifications
Motor mounting: Ø6.6mm tri-point m1.4, Ø9mm two-point m2
Electronic mounting: 25.5x25.5 (bottom plate), 20x20 (top plate)
Camera mounting: Nano (14x14)
Prop size: 2"
Weight: 13g
Top Plate: 1.5mm
Bottom Plate: 2.5mm
VTX systems supported:
DJI: naked vista
HDZERO: Whoop Lite
Avatar: 1S lite VTX
Analog: Nano VTX
Includes
1x CraftedKwads Odonata HD 2" Ironclad Micro Frame Kit
DLQ labs designed this frame for 8bitchrist_fpv. I wanted to make him a signature frame 3" frame that was sleek and sexy, and could hold up to the abuse of an urban environment. Cut from 3mm 3K carbon fiber, it weighs in at 8.5g or 2.5mm (lite) 3K carbon fiber, weighing 6.9g.
Be sure to check out all our Micro Frames, and all our DaddyLovesQuads products!
Specifications
Standard Version:
3mm carbon fiber unibody base plate
m2 steel mounting hardware
Supports whoop style Flight controllers and ESC's
Supports up to 3.1 inch propellers
9mm and 12mm m2 motor mounts (11xx, 12xx, 13xx, 14xx)
Weighs approximately 8.4 grams
Lite Version:
2.5mm carbon fiber unibody base plate
m2 steel mounting hardware
Supports whoop style Flight controllers and ESC's
Supports up to 3.1 inch propellers
9mm and 12mm m2 motor mounts (11xx, 12xx, 13xx, 14xx)
Weighs approximately 6.9 grams
Includes
1x Daddy Loves Quads 8bit Nebula 3" Toothpick Frame Kit - Choose Version
3k Carbon Fiber frame
4x 16mm M2 steel bolts (standard)
4x 14mm M2 steel bolts (lite)
4x m2 lock nuts
4x m2 5mm nylon F-F standoff
4x m2 nylon nuts
MambaFPV has been flying DLQFPV and 8bit Micro frames for the last two years. He came to me with a special request. He wanted to take the 8bit nebula he loved so much but give it a Mambafpv twist. We ended up with a tank, that is cut from 6mm 3k Carbon Fiber. Along with Custom TPU Canopy and TPU arm guards this frame is a beast. Supports 25x25 (whoop style) AIO FC.(Rev. 2) Frame has been updated to be even more durable with some modifications made to widen the arms at the base. We also went with a 1mm Mamba inlay on either side to made milling easier for our cutter. All frames still carry a one year warranty as long as your build is within the frame specs.
Be sure to check out all our Micro Frames, and all our DaddyLovesQuads products!
Specifications
Wheelbase: 120mm
Size: 3"
3K carbon
Motor Mounting: 9x9mm/12x12mm M2
Includes
1x Daddy Loves Quads Asbo X (Rev. 2) 3" Toothpick Frame Kit
6mm 3K carbon frame
12 M2 8mm motor mount screws
4 M2 14mm FC and Canopy mounting screws (digital)
4 M2 steel nylon lock nuts
4 TPU Arm guards and 1 Canopy vista compatible
The Darwin FPV AIO is great for Ultralight and Whoop builds. It even come with a capacitor pre-soldered for convenience! With AIOs becoming more popular every day, Darwin enters the market with one of their very own made specifically for small builds!
Check out our other AIO flight controllers as well as our other DarwinFPV products!
Specifications
MCU: STM32F411
Gyro: MPU6000
BEC: 5V/2A,3.3V
Input voltage: 1-3S Lipo
Support Receiver: PPM, Ibus, Sbus, Dsmx
Black box: NO
Barometer: NO
Firmware: MATEKF411
Buzzer interface: YES
Betaflight OSD: AT7456E
Constant current: 15A
Peak current: 17A
MCU: EFM8BB21F16G(48MHz)
Firmware: BLHeli_S
Protocol: Dshot600
Mounting: 25.5X25.5 M2
Includes
1x DarwinFPV 1-3S F4 AIO Flight Controller w/ 15A ESC
Wiring Diagram
The Darwin FPV AIO is great for Ultralight and Whoop builds. It even come with a capacitor pre-soldered for convenience! With AIOs becoming more popular every day, Darwin enters the market with one of their very own made specifically for small builds! This version even comes with pre-flashed Bluejay ESCs and built-in ExpressLRS!
Check out our other AIO flight controllers as well as our other DarwinFPV products!
Specifications
MCU: STM32F411CEU6(100MHz)
Gyro: ICM-20689
BEC: 5V/2A,3.3V
Input voltage: 1-3S Lipo
Blackbox: NO
Barometer: NO
Firmware: betaflight_4.3.0_BETAFPVF4SX1280
Buzzer interface: YES
Betaflight OSD: AT7456E
Constant current: 15A
Peak current: 17A
MCU: EFM8BB21F16G
Firmware: Bluejay_S_H_50_48_v0.14
Receiver: Integrated Express LRS 2.4GHz
Mounting: 25.5X25.5 M2
Includes
1x DarwinFPV 1-3S F411 AIO Flight Controller w/ 15A Bluejay ESC and ELRS2.0
This FPV Goggle comes with a 5.8GHz 40ch Receiver, a 3.7V/2000mAh internal battery, and a 4.3" HD LCD 16:9 screen made for Racing Drone Micro Whoop Drone.
Check out the rest of our goggles and accessories, along with all our DarwinFPV products!
Specifications
BODY
Dimension: 155x144x113mm
Weight: 375g with 2hr 2000mAh battery
Belt: three-Ways adjustable belt
SCREEN
Aspect Ratio: 16:9
Screen size: 4.3 inch
Screen resolution: 800*480 (No blur after enlarging by the lens)
Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 12 O'CLOCK
LENS
2.8x boost of the video to acquire an intense feel-in-there video
92% transparent rate no distortion of light
JACK
Input CVBS
Headphone sound output
TF Card(C10) Max32G
USB DC5V IN, the device operating current of 550mA@5V, built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment
BATTERY
Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is completed, here are bright green LED
Each full charge revive is around 2 hours of working time
NOTE: Please keep charging the battery once every four months if the device is not used for a long time, in order to protect the battery.
Includes
1x DarwinFPV 4.3" 5.8GHz FPV Goggles
1x USB Charging Cable
2x 5.8G RP-SMA Antennas
1x Adjustable Headband
The props for this BNF press fit on and do not screw into the motor (much like many other Whoops & Toothpicks)
The Darwin Baby Ape has been loved by many pilots as soon as it was published. In order to design a better FPV drone, DarwinFPV upgraded the Baby Ape based on the pilots' feedback and launched the BabyApe Pro V2.
Darwin made several upgrades to the frame. First of all, nylon standoffs are upgraded to aluminum alloy standoffs, which strengthens the frame and stables structure.
Second, they added the receiver fixing bracket.
Third, they upgraded the arms. The arms are upgraded from 4 individual arms (2.5mm thickness) to 2 integrated arms (3.0mm thickness). It is easier to disassemble, sturdy, and durable.
Lastly, the V2 version only needs 4 screws to fix, and the arm can be replaced by removing 2 screws without removing the whole drone.
Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection!
Specifications
Motors
Input Voltage: 2-3S
Stator Size: 11x4mm
Kv: 4300
AIO
MCU: STM32F411
Gyro: MPU6000
BEC: 5V/2A,3.3V
Input voltage: 1-3S Lipo
Support Receiver: PPM, Ibus, Sbus, Dsmx
Black box: NO
Barometer: NO
Firmware: MATEKF411
Buzzer interface: YES
Betaflight OSD: AT7456E
Constant current: 15A
Peak current: 17A
MCU: EFM8BB21F16G(48MHz)
Firmware: BLHeli_S
Protocol: Dshot600
Mounting: 25.5X25.5 M2
VTX
Input Voltage: 7V~24V
RF Output Power: 0mW/25mW/100mW/200mW switchable
Antenna Connector: U.FL
Caddx Ant Camera
Model: Caddx Ant
Image Sensor: 1/3" CMOS
Resolution: 1200TVL
Signal System: PAL/NTSC
Includes
1x DarwinFPV BNF Baby Ape Pro V2 3" Quad - Plug-N-Play - Choose Version
CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame is composed of upper and lower carbon plates and a high-strength injection guard, which is very strong and crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; we abandoned the traditional AIO solution and adopted the split design of the F4, 30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone.
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
CineApe25 is a very cost-effective whoop FPV drone. It not only solves the worries of beginners about the high-risk factors and high threshold of assembly but also improves the after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice!
Features
Comes with high-strength one-piece injection-molded propeller guard, which has higher safety, and a stronger and more durable frame, also reduces the probability of risk, so you have more confidence to fly.
The new ducted aerodynamic design greatly optimizes power efficiency, and with the 1504-3600KV long-endurance motor, the CineApe 25 has a battery life of up to 9mins.
Compared with traditional stacks, we have treated the CineApe 25 stack with glue to protect it, which greatly reduces the risk of damage to the stack due to contact with metal particles, fine sand and gravel, weeds or dewdrops, etc.
The external Type-C parameter adjustment port is convenient for parameter adjustment.
It comes with quick-release design only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
The stack has built-in barometer and SD card slot, and reserves rich interfaces resource, which is facilitate upgrade and DIY in the future.
There are optional versions and HD VTX solutions can be provided.
Specifications
Brand: DarwinFPV
Model: CineApe 25 Cinematic FPV Drone
Frame Structure: True-X
Wheelbase: 112mm
Dimension: 160x160x43mm
Motor: 1504-3600KV
Propeller: HQProp T63MMX6
Recommend Battery: LiPo 4S 850mAh
Hovering Time: 9mins (4S 850mAh Battery)
Weight: 144g (Without Battery)
Flight Controller: F411 MPU6500 AT7456E
Reserved Connector: 1x SBUS (RX1 inverter), 2x Uarts 2x Softserial, 1x I2C, 1x RGB, 1x Buzzer, 1x USER (A15), 1x USB
ESC: BlueJay 3-4S 30A
Analog Version: CADDX ANT Analog CAM + 600mW Analog VTX
Includes
1x CineApe 25 Cinematic FPV Drone
4x HQProp T63MMX6 propeller (2L2R)
2x battery strap 10x170mm
1x EVA crashproof foam
1x EVA bottom plate shock-absorbing pad
1x Spare Screw Kit
1x Sticker
1x Manual
The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforcement to the injection-molded boot, which now excels in crash protection.
The CineApe 25 Frame Kit is a cost-effective cinewhoop frame with tough, injection-molded prop guards to ensure your electronics are safe in the event of a crash. With a quick-release design, repairs on the go are made easy and the frame layout is great for AIO boards.
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
Features
Comes with a high-strength one-piece injection-molded propeller guard, which has higher safety, a stronger and more durable frame, and also reduces the probability of risk, so you have more confidence to fly.
It is used the front Type-C parameter adjustment port, with DARWIN parameter adjustment adapter board, easy to adjust parameters.
It comes with a quick-release frame design that only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
Compared with the same type of frames, our CineApe 25 frame has added multiple battery strap mounting holes, compatible with 20mm stack mounting holes and 25.5mm AIO mounting holes. The battery anti-skid pad is designed to be extended, which avoids the trouble that the anti-skid pad at the back of the battery is too small to play a non-slip effect when installing the GoPro.
The arms use a strong triangular structure, which is more durable.
The integrated fixed design of the antenna print solves the problem of the traditional antenna moving easily and greatly optimizes the structure of the frame.
Specifications
Wheelbase: 112mm
Top Plate Hole: 20x20mm，25.5x25.5mm
Bottom Plate Hole: 28x15mm (3 holes)，20x20mm，25.5x25.5mm
Motor Mounting Hole: 9x12mm
Carbon Plate Camera Mounting Hole: 19mm
3D Print Camera Hole:14mm
Weight: 66.7g
Top Plate Thickness: 2.5mm
Includes
1x top plate2.5mm
1x bottom plate 2mm
1x injection molding guard
1x camera mount
1x antenna mount
1x battery anti-skid pad
2x battery cable tie 10x170mm
7x M2x12mm copper standoff
4x M2 nylon nut
6x M2x6 hexagon socket head screw
5x M2x7 hexagon socket head screw
3x M2x10 hexagon socket head screw
4x M2x14 hexagon socket head screw
1x sticker
Now this is something truly special for its size and capability - Introducing the Diatone Mamba MK4 F740 AIO. The Diatone Mamba MK4 F740 AIO is a powerful, all-in-one flight controller and ESC for sub 250g 3, 4, and 5 inch quads. It is equipped with an F7 processor, a 32bit 4in1 ESC of up to 40A, a barometer and OSD chip, and 16M of Blackbox memory. Connecting a video transmitter is easy and efficient, giving you a reliable and versatile system.
Check out all our Whoop/AIO Flight Controllers and our full Diatone collection!.
FC Specifications
Target: MAMBA F722_2022B
MCU: 216MHz STM32F722
GYRO: ICM-42688-P
Barometer: Yes
OSD: Yes
Blacbox: 16MB Flash
Uarts: 6 Set
Motor Signal: 4 Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED
AIR UNIT Port: Yes
WIFI: No
F.Port: Yes
RSSI: No
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
BEC Protection: Yes
Receiver Protection: Yes
TVS Protection: Yes
BEC: 3.3V 0.5A & 5V 2A
Mounting size: 25.5 x 25.5mm/M2
ESC Specifications
Input: 3~6S Lipo (12.6~25.2V)
Continue Current: 40Ax4
Burst current: 45A (10 Seconds)
Target：BLHeli_32 MAMBA F40_128K
SOFT: Dshot300/600
PWM:24~128K
Include
1x Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32bit 4in1 ESC - WIFI
1x High Frequency 470uF/35V
1x AIR UNIT sh1.0
1x 16AWG 60mm
1x AMASS Original XT60
Wiring Diagram
Please notice：This AIO only supports Alpha and does not support BetaFlight
Alpha: https://gui.fettec.net/FC/index.html
Flight controllers that use Aphla are known to be the best for freestyling, for smoothness and reliability. Diatone is delivering on next-gen premium FPV parts, especially seen with the MK5 AIO. Capable of supporting up to 40 amps of power while working off metal mosfets, for better performance. You are going to want to put this on your next 3-4 inch freestyle ripper.
Check out all our Whoop/AIO Flight Controllers and our full Diatone collection!.
Features
Metal Mosfets
Comes with a User Manual with a Wiring Diagram
PWM: 24~128K
HD Compatible
Specification
FC Specifications
Target： Alpha
MCU: 170MHz STM32G473
GYRO: IIM-42652
OSD: Yes
Uarts: 4 Set
Motor Signal:4 Set
ESC Soft: Dshot300/600/1200/2400
Power Led: Yes
LED Controller: Yes
AIR UNIT Port: Yes
Buzz: Yes
Input: 4~6S Lipo (14.8~25.2V)
BEC Protection: Yes
Receiver Protection: Yes
TVS Protection: Yes
BEC: 10V 2A& 5V 2A
Mounting size: 25.5×25.5mm/M2
Overall dimensions: 35×34.5×6.5mm
ESC Specifications
Input: 4~6S Lipo (14.8~25.2V)f
Continue Current: 40A×4
Burst current: 45A (10S)
Target：BLHeli_32 MAMBA F40_128K
SOFT: Dshot300/600/1200/2400
PWM:24~128K
Includes
1x Diatone Mamba MK5 G4 4-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - DSHOT2400
1x High Frequency 470uF/35V
1x AIR UNIT sh1.0 connector
2x 16AWG 60mm
1x AMASS Original XT60
Replacement part for the EMAX EZ Pilot.
Check out all our EMAX products and the rest of our micro/whoop props.
Includes
4x EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop (2 CW, 2 CCW)
All items with batteries must be shipped by a ground shipping method.
The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!
2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos:
1S 450mAh - PH2.0
2S 300mAh - PH2.0
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!
Specifications
Frame
Wheelbase: 75mm
Dry Weight: 31.2g
All Up Weight: 43.5g with 1x 450mAh 1S battery
Frame Material: Polypropylene
Motors
Stator Size: 0802
Kv: 16000kv
Propeller Mount: Push-On Avan TH-style
Propeller: Avan Turtlemode 4-Blade
All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)
Battery Connector: JST-PH2.0
FPV System
VTX Power: 25/100/200mw Switchable
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
Includes
1x Tinyhawk II FPV Racing Drone
1x EMAX Transporter 5.8G FPV Goggles
1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging
1x EMAX E6 Transmitter
1x EMAX 450mAh 1S HV Battery
1x EMAX 300mAh 2S HV Battery
2x CCW + 2x CW Spare Props
1x 1S-2S USB LiPo Charger
1x Screwdriver + Hardware Kit
1x Micro USB Charging Cable
1x Faux Carbon Fiber Carrying Case
Replacement all-in-one flight controller and ESC for the Tinyhawk 3. Standard 26x26 whoop mounting pattern for DIY builds.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
1x EMAX Tinyhawk III 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
Replacement set of Avia TH propellers for the Tinyhawk 3.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
EMAX Tinyhawk III Avia Props 4 pack - RED
All batteries must be shipped by a ground shipping method.
The Tinyhawk 1s lipo battery is a big part of the whole design around the great flight performance of the Tiny Hawk. The weight, the size, and the power from the High Voltage 450mah capacity cell were all considered during the design process. Engineers tested countless hours of flight and performance to achieve the best Lipo battery for you to enjoy up to 4 minutes of flying time!
Our pilots agree that at least 4-6 batteries will be required to have the best flying experience for an all day fun fly!
Required charger type: Any charger that has 4.35 High Voltage capabilities. This will keep you flying for up to 4 minutes per charge.
Be sure to check out our all micro packs, and all our EMAX gear!
Specifications
Voltage: 1S 4.35V HV
Capacity: 450 mAh
Discharge rating: 80c/160c
Connector: PH2.0
Includes
1x EMAX TinyHawk 3.8V 1S 450mAh LiHV Whoop/Micro Battery - PH2.0
Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System.
Check out our other pre-built quads, as well as other great products from Flywoo!
Features
Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.
Dead Cat Style
The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.
New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light AIO with ELRS 2.4G RXThe drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
HD Digital VTX System
The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.
More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed.
Specifications
Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit
Motor: ROBO 1002 19800KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Propeller: 1608-3 Blade 40mm 1.5mm Shaft
Camera: Nano Lite Cam
Weight: 31g
GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller
MCU: STM32F411CEU6
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V
Input Voltage: 1S (<4.35v)
Firmware: FLYWOOF411_5IN1_AIO
Mounting: 25x25mm, M2
Onboard 4in1 ESC
MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)
ROBO 1002 19800KV
Configuration: 9N12P
Stator Diamter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.3
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 44
Internal Resistance: 89mΩ
Max Current(3S): 11.8A
Max Efficiency Current: (2-4A)>84%
HDZERO WHOOP LITE VTX
Input Voltage: 1S-3S
Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package
HDZERO NANO LITE CAMERA
Size: 14x16x11mm
Weight: 1.5gram
Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor
FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°
Includes
1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
4x 1608 -3 40mm 1.5mm shaft
2x TPU battery mount
1x hardware screws set
4x Prop guards
Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the elite capabilities of HD Walksnail System.
Check out our other pre-built quads, as well as other great products from Flywoo!
Features
Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.
Dead Cat Style
The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.
New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light AIO with ELRS 2.4G RX
The drone's GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. This allows for the ultimate lightweight design without sacrificing functionality.
HD Digital VTX System
The Walksnail Avatar HD Mini 1S Lite is a lightweight VTX designed for 1S whoop drones, featuring H.265 high-efficiency video coding technology, 1080P/60FPS image recording with 22ms ultra-low latency, and built-in 8 GB storage for interference-free HD video recording and USB exporting.
More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed.
Specifications
Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit
Motor: ROBO 1002 19800KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Propeller: 1608-3 Blade 40mm 1.5mm Shaft
Camera: Avatar Lite Cam
Weight: 33g
GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller
MCU: STM32F411CEU6
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V
Input Voltage: 1S (<4.35v)
Firmware: FLYWOOF411_5IN1_AIO
Mounting: 25x25mm, M2
Onboard 4in1 ESC
MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)
ROBO 1002 19800KV
Configuration: 9N12P
Stator Diamter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.3
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 44
Internal Resistance: 89mΩ
Max Current(3S): 11.8A
Max Efficiency Current: (2-4A)>84%
Walksnail Avatar HD Mini 1S Lite
Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface: JST1.0x6(Power in)JST1.0x4(USB)
Mounting Holes: 25.5x25.5mm
Dimensions: 30x30x6.5mm
Storage: 8G
Recording: 1080p/720p
Weight: 5.1g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 3.1V-5V
Supported FC System: Betaflight
OSD: Canvas mode
Bitrate: 25mbps, 50mbps
Latency Average delay: 22ms
Antenna: IPEX
Avatar lite camera
Model: Avatar lite camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9 4/3
Lens:2.1mm
FOV:170°
Aperture:F2.0
Shutter Rolling: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 1.8g
Dimensions: 14x14x16mm
Includes
1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ Walksnail Avatar Mini 1S Lite & Avatar Lite Cam - ELRS 2.4 GHz
4x 1608 -3 40mm 1.5mm shaft
2x TPU battery mount
1x hardware screws set
4x Prop guards
The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor. Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds. A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, this model includes the GOKU F411 ELRS 1S AIO V2 with ELRS 2.4G receiver (UART 2) for a lightweight design with optimal performance. This version utilizes the elite capabilities of the HDZero HD digital VTX system. The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.
Check out our other pre-built quads, as well as other great products from Flywoo!
Features:
Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds - perfect for racing competitions.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.
Specifications
Motor: ROBO 1002 23,500KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Props: 1609 - 4 blade 40mm 1.5mm Shaft
HD Digital VTX System: HDZero Whoop Lite Bundle
Receiver: ExpressLRS 2.4GHz
Weight: 31g
Flight Time: Explorer 1S 450mAh HV V2: 4m - Explorer 1s 750mAh HV V2: 6m (approximate)
Speed: 70km/h (approximate)
GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller
MCU: STM32F411CEU6
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V
Input Voltage: 1S (<4.35v)
Firmware: FLYWOOF411_5IN1_AIO
Mounting: 25x25mm, M2
Onboard 4in1 ESC
MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)
Flywoo ROBO 1002 23500KV Fpv Motor:
Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.5
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 52
Internal Resistance: 75mΩ
Max Current(3S): 14A
Max Efficiency Current: (2-4A)>84%
HDZero Whoop LITE VTX
Input Voltage: 1S-3S
Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package
HDZero Nano LITE Camera
Size: 14x16x11mm
Weight: 1.5gram
Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor
FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°
Includes
1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
4x 1609 - 4 40mm 1.5mm shaft
2x TPU Battery Mount
1x Hardware Screw Set
4x Prop guards
The FR16 Nano Baby V2 is an advanced microdrone with improved flight time, power, and appearance over its predecessor. It's 30% more powerful despite being heavier, with flexible flight, great maneuverability, and higher speeds. A newly designed canopy and plate provide crash resistance, and it's equipped with a ROBO 1002 23500KV motor. Plus, the GOKU Versatile F411 ELRS 1S AIO V2 + ELRS 2.4G receiver ensures a lightweight, top-performing design. This version utilizes the elite capabilities of the Walksnail HD digital VTX system. The Walksnail Avatar HD Mini 1S Lite is a lightweight VTX designed for 1S whoop drones, featuring H.265 high-efficiency video coding technology, 1080P/60FPS image recording with 22ms ultra-low latency, and built-in 8 GB storage for interference-free HD video recording and USB exporting.
Check out our other pre-built quads, as well as other great products from Flywoo!
Features
Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds perfect for racing competitions.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.
Specification
Motor: ROBO 1002 23500KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Props: 1609 - 4 blade 40mm 1.5mm Shaft
HD Digital VTX System: Walksnail Avatar HD Mini 1S Lite
Receiver: ExpressLRS 2.4GHz
Weight: 33g
Flight Time: Explorer 1S 450mAh HV V2: 4m - Explorer 1S 750mAh HV V2: 6m (approximate)
Speed: 70km/h (approximate)
GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller
MCU: STM32F411CEU6
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V
Input Voltage: 1S (<4.35v)
Firmware: FLYWOOF411_5IN1_AIO
Mounting: 25x25mm, M2
Onboard 4in1 ESC
MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)
Flywoo ROBO 1002 23500KV Fpv Motor:
Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.5
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 52
Internal Resistance: 75mΩ
Max Current(3S): 14A
Max Efficiency Current: (2-4A)>84%
Walksnail Avatar HD Mini 1S Lite
Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface: JST1.0x6(Power in)JST1.0x4(USB)
Mounting Holes: 25.5x25.5mm
Dimensions: 30x30x6.5mm
Storage: 8G
Recording: 1080p/720p
Weight: 5.1g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 3.1V-5V
Supported FC System: Betaflight
OSD: Canvas mode
Bitrate: 25mbps, 50mbps
Latency Average delay: 22ms
Antenna: IPEX
Avatar lite camera
Model: Avatar lite camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9 4/3
Lens:2.1mm
FOV: 170°
Aperture: F2.0
Shutter Rolling: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 1.8g
Dimensions: 14x14x16mm
Includes
1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ Avatar Nano Cam - ELRS 2.4 GHz
4x 1609 - 4 40mm 1.5mm shaft
2x TPU Battery Mount
1x Hardware Screw Set
4x Prop guards
This does not come with LEDs, those need to be bought separately.
The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It also features a bottom-mounted transmission PC placement compartment, quick-detachable frame for easy separation of parts, and reverse push propeller power for stable flight and longer endurance. You have the option to install your own O3, O3 lite, Walksnail, Vista, or HDZero system. Put some 1003 Motors on FlyLens 85 for a more agile build!
Check out the rest of our Whoop Frames & Accessories, and all our Flywoo products!
Specifications
Brand: FLYWOO
Model: Flylens 85
Main Board Thickness: 2mm
CNC Gimbal Thickness: 1mm
Protective Ring Material: PC+
Flight Control Hole Position: 25.5x25.5mm
VTX Mounting: 20/25.5mm Motor Hole
Position: 6.6mm/Hole 1.4mm
Propeller Size: 2 inch
Weight: 27g (Standard) \ 25.5g (Lite)
Camera Hole Position (Standard): 20mm
Camera Hole Position (Lite): 18mm
Includes
1x Flywoo FlyLens 85 85mm Whoop Frame - Choose Your Version
Meet the new Flywoo GOKU F405 2-6S AIO Whoop/Toothpick Flight Controller w/ 40A 8Bit 4in1 ESC. This advanced system is made with the powerful F405 chip, with a integrated 5V BEC, barometer, black box, and WS2812LED, as well as 6 complete hardware serial ports, I2C and other functions. Everything you need for a reliable and efficient flight experience.
Look at our other Whoop/AIO Flight Controllers, as well as the rest of our Flywoo selection.
Feature
This AIO come installed with a MPU6000
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
The GOKU includes a barometer
Featuring a Black Box
Current Sensor
Specification
MCU: STM32F405 BGA 8bit processor
IMU: MPU6000
Barometer: BMP280
Onboard LED: WS2812x4
6 hardware UARTS (UART1,2,3,4,5,6)
Onbord Storage: 8Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 33.5x33.5mm
Mounting Holes: Standard 25.5x25.5mm
Weight: 8.5g
Input Voltage: 2-6S Lipo
Continuous Current: 40A
Firmware: BLHELI_S
Includes
Flywoo GOKU F405 2-6S AIO Whoop/Toothpick Flight Controller w/ 40A 8Bit 4in1 ESC
1x XT60H-M Power Lead
4x Black M2 grommets
1x Capacitor
1x Sticker
Flywoo introduces a remarkable, highly integrated AlO product, the GOKU Versatile F405 1-2S, 12A 5-in-1, 400mw AlO with Built-in ELRS 2.4G. Featuring the world's first STM32F405 BGA chip. It provides 5 UART serial ports for seamless device/module connection & 12C compass input. A 12A 4-in-1 ESC, fully-integrated serial ports-controlled ELRS receiver and a built-in 400mw VTX make it perfect for Tiny Whoop races or Toothpick freestyle flying.
Look at our other Whoop/AIO Flight Controllers, as well as the rest of our Flywoo selection.
Features
F405 BGA chip utilizes the powerful for enhanced computational processing power and a smaller form factor
Features an onboard 12A 4-in-1 ESC
Equipped with 5 UART serial ports for effortless connectivity with various devices and modules.
Supports 12C compass input, providing accurate navigation and positioning capabilities ExpressLRS 2.4G· Built-in receiver (UART) with a lightweight design, convenient for WiFi upgrades.
Built-in 400mw 5.8G video transmitter for an extended signal transmission range Built-in 8MB black box storage for easy access to flight status data.
Specifications
Product Name: Versatile F405 5IN1 AIO
MCU: STM32F405 BGA
Gyro: ICM42688
Barometer: SPL06
Black Box: 8M
LED: Supported
OSD: Supported
Buzzer: Supported
UART: 1, 2, 3, 4, 6
Built-in Receiver: ExpressLRS 2.4G
Built-in VTX: 25/50/100/200/400mw
VTX Protocol: IRC Tramp
ESC Protocol : Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Continuous Current: 12Ax4
Input Voltage: 15-25 (3V-8.7V)
BF Firmware: FLYWOO F405S AIO
Target ELRS Firmware: Flywoo EL24E 2400 RX 3.0.0
ESC Firmware : Z.H_30_REV16.7(BLHELI.S)
Size: 30.3x30.3mm
Mounting: 25.5x25.5-3mm
Weight: 4.6g (Without Antenna), 5.7g (With Antenna)
Includes
1x Flywoo GOKU Versatile F405 1-2S AIO Whoop/Toothpick Flight Controller (w/12A 8Bit 4in1 ESC & 400mW VTX) - ELRS 2.4GHz
The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 connectors. Discharging more current in the same capacity than PH2.0 crimped pins, A30 connectors provide significantly more power - leading to extended flight time at full throttle on 1S whoop drones. Upgrade to A30 connectors for better performance and reliability.
Check out all our pigtails and connectors as well as our products from Flywoo!
Flywoo factory images say 20awg, but 1st batch shipped are actually 22awg.
Specifications
Wire Length: 80mm
Wire Gauge: 22AWG
Weight: 1.2g (ea.)
Connector: A30 Female
Includes
1x Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack
Replacement motor for the Firefly DC16 or a new motor to style out your next micro build with this purple and gold micro motor from Flywoo. Rated with a stator 1002 and Kv of 19,800, giving you great power for your whoop builds.
Check out our Micro Motors and Flywoo gear selection!
Specifications
KV: 19800
Stator: 1002
Motor Bolt Pattern: 6mm Tri-Mount
Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.3
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 44
Internal Resistance: 89mΩ
Max Current(3S): 11.8A
Max Efficiency Current: (2-4A)>84%
Includes
1x Flywoo Robo 1002 19800Kv Micro Motor
Replacement motor for the Firefly DC16 or a new motor to style out your next micro build with this purple and gold micro motor from Flywoo. Rated with a stator 1002 and Kv of 23,500, giving you great power for your whoop builds.
Check out our Micro Motors and Flywoo gear selection!
Specifications
KV: 23500
Stator: 1002
Motor Bolt Pattern: 6mm Tri-Mount
Configuration: 9N12P
Stator Diamter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.5
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 52
Internal Resistance: 75mΩ
Max Current(3S): 14A
Max Efficiency Current: (2-4A)>84%
Includes
1x Flywoo Robo 1002 23500Kv Micro Motor
The Flywoo Robo 1003 motor provides an efficient power output and smooth operation in a lightweight package. It's constructed of top-grade 7075 aviation aluminum and boasts a dual bearing design, high-efficiency magnetic circuit design, dual color oxidation, and wire soldering pad for reliable control. It's an ideal choice for whoop and toothpick models.
Check out our Micro Motors and Flywoo gear selection!
Specifications
Brand: FLYWOO
Model: RB1003 Brushless motor
Configuration: 9N12P
Magnet: N52H
Stator Diameter: 10MM
Stator Height: 3MM
Output Shaft Diameter: 1.50MM
Dimensions: 13.5mm x 9.2mm
Rated Voltage: 1-2S
Mounting Hole: 3xM1.4-D6.6
Weight: 3.3g (4cm wire)
Includes
1x Flywoo Robo 1003 14,800Kv Micro Motor - Gold/Purple
Foxeer took everything they learned from creating their top of the line reaper series and fit it into one compact board. This AIO is incredibly reliable and a great choice for any build where you need an AIO FC.
Check out our other AIO flight controllers and the rest of our Foxeer products!
Specifications
Input Voltage: 2-6S
CPU: STM32F745
Gyro: MPU6000
ACC:MPU6000
BEC Output: DC5V/2A
OSD: BF OSD
Black Box: 16M Flash Memory
UARTs: 5
USB: Micro USB
Max continuous Current: 45A
Max Burst Current: 50A
Telemetry: No
Current Sensor: Yes
Input Signal: Dshot300/600
FC Firmware: FOXE-FOXEERF745V4_AIO
ESC Firmware: G-H-30 BLS 16.7
Dimensions: 32.5x32.5mm
Mounting Pattern: 25.5x25.5mm Φ3mm/M2
Weight: 8.6g
Working Temperature: -20℃ ~ +55℃
Working Humidity: 20～95%
Storage Temperature: -20℃ ~ +70℃
Includes
1x Foxeer Reaper V4 2-6S F7 AIO Toothpick/Whoop Flight Controller w/ 45A BLS Bluejay ESC
1x Power Lead
4x Vibration Gummies
This motor is the first of its kind in that it’s a full 5” performance size motor with a 12x12 M2 mount platform and M3 Prop shaft. (M5 adapter included) Pair this motor with the Gemfan F3 or F4 prop and a sub 500g AUW 5” frame for a truly stellar level of control performance.
This motor is specifically designed for the following uses:
3” Ducted whoop
4” Anything
5” Light blade and low general AUW for 5”
Tall version w/ M5 shaft also available!
Check out our other motors, and all our FPVCycle selection!
Specifications
Kv: 3450Kv
Input Voltage: 3-5S LiPo
Configuration: 12N14P
Motor Dimensions: Φ26mm x 26mm
Stator Dimensions: Φ23mm
Shaft Diameter: 3mm w/ 5mm Adapter
Mounting Pattern: Φ12mm M2
Wire Dimensions: 22AWG x 250mm
Weight: 29g
Includes
1x FPVCycle 23mm Short 3450Kv Motor - M3 Mount w/ M5 Adapter
Use this frame in 1.5mm or 2mm with the 1S 3” drivetrain for a super fun and safe 45-55g AUW quad that will knock your socks off! The same pattern is offered in 3mm for the 3S drivetrain if you prefer a unibody over the TP3. It’s impressively stiff and confidence-inspiring in 3mm and only 8.8g. You should be aware that the 1.5mm version is not as strong as the 2mm version but it is about 1.3g lighter.This design is called the ‘Baby Tooth’ not because it’s smaller than the TP3, but because it supports 1S better and is simpler than the TP3. After some heavy refinement, this is the final pattern we landed on.This frame is cut from T700 carbon but It does not have a chamfer on it. This frame is supposed to be a high-value item with the majority of the design time invested into optimizing performance, weight, and durability. Customizing the frame with your own hand-done sanding on the edges is up to you.The latest version seen in the product pictures has thicker arm ends for more motor protection and a crossbar on one of the arms designed to mount the MiniMortal T antenna. The overall frame design has also had minor adjustments to its lines to improve durability further.
Specifications:
115mm diagonal for 3” props
T700 carbon
1.5mm thick ~4.4g (carbon only)
2mm thick 5.7g (carbon only)
3mm thick 8.8g (carbon only)
Motor protection bumper
FC Mounting: 25.4x25.4mm M2 (Whoop mount)
FC Mounting: 16x16 M2 also on there
Crossbar for mounting MiniMortal T Antenna
FC mounting hardware included with frame
Includes
FPV Cycle Baby Tooth 2mm 3" Toothpick Frame Kit
This is a unique stack for the demands of the industry today. It has a 25.5x25.5 M2 (Whoop) mount pattern because there are now many frames that are designed with that pattern.
The problem is that high-powered AIO boards are way overpriced due to the forever chip shortage and still have a high failure rate. Much of the failures are associated with the cramped space constraints of the small board. We split the ESC and FC but called for the ESC to have a nearly empty top side and the FC to have nearly all its components on the bottom and sit inside the footprint of the ESC solder pads. ALL of the FC's solder pads are also on the TOP. When you assemble the stack inside your frame, you will be able to access and solder ALL pads on BOTH boards. Additionally, the FC has a black box chip which is rare on AIO boards.
Check out our other AIO Flight Controllers and our Darwin FPV products!
Specifications
F722
MCU: STM32F722RET6(216MHz)
Gyro: MPU6000
Barometer: BMP280(I2C)
OSD Chip: Betaflight OSD AT7456E
Blackbox: 16MB
UARTS: 5
I2C: SDA / SLA pads
LED: Yes
Beeper: Yes
Firmware Target: DARWINF722HD
FC Mounting Pattern: 25.5x25.5mm
Dimensions: 37x36x10.8mm
4in1 ESC
Input Voltage: 3-6S
Max. Continuous Current: 50A
Max. Burst Current: 60A
MCU: EFM8BB21F16G
BEC: 5V/2A and 10V/2A
Current Sensor: Yes (Scale 125)
Mounting Dimensions: 25.5x25.5mm(M2)
Dimensions 37x36x10.8mm
Includes
1x FPV Cycle Darwin FPV F722 25x25 Flight Controller
1x FPV Cycle Darwin FPV 45A 3-6S 25x25 4in1 ESC
1x XT60-7CM-14AWG Power cables
1x 25V 470uF capacitor
8 x M2*6.5mm Damping rings
4 x M2 nuts
Wiring Diagram
At its inception, the Toothpick formula was to turn a whoop inside out and give it the ability to perform like a much larger craft. Just a typical brushless AIO whoop board with similar motors but very large, very light 65mm(2.5in) props on a very light frame. The resulting performance was jaw dropping in any configuration from an AUW of ~37g on 1S to 73g on 2S and pure wackiness on 3S.The goal with the Toothpick project was first and foremost to be safe for almost any environment, fully legal, quiet, durable, reliable and most importantly, loads of fun! These features should not be compatible with each other but the magic of crazy disk loading and power radios made it possible.As with anything, the more you do it, the more developed and fine tuned your tools become. Like a surgeon that gets better at their craft and graduates to more and more developed instruments, the TP3 is literally a refined, purpose built, surgical instrument of the sky. If built to top end spec on 3S, this sucker is a frikin bullet! So throw that safety out the window. However the same setup on 2S becomes a very safe friend :-). Just as safe as the original Toothpick setup. The noise profile on 2S is significantly quieter than a 65mm/2.5” Toothpick twin blade on 2S. On 3S it’s still slightly quieter than a top power spec 65mm/2.5” Toothpick.The TP3 formula is similar to the original. Extremely low weight, large props for such a low weight and the smallest motor that can spin that prop with good control. The pudding is in the details however and we spent months intensely testing everything just to find out that what we’re looking for doesn’t exist! So we started making custom parts. There is a lot in how it’s setup as well but that’s better left to the video than writing pages on pages...Starting with the prop, we knew what we wanted but it didn’t exist. Having a good relationship with Gemfan, we carefully crafted a prop together and they got working on manufacturing. With the prop in mind, we then tested custom motor products from just about every known company out there before landing on a couple of gems...that only became good with numerous revisions. Other manufacturers will figure it out and give us more options in time but the two we have now are stellar. Given the crazy performance we were after, the frame also needed to be reimagined to perform and hold up to a new level of punishment. Next, we had to solve the annoyance with whoop boards and how difficult they were to solder. FullSpeed and BetaFPV were instrumental in the execution of the redesign and we now have two great options in case one runs into QC or reliability issues. The rest of the build is arbitrary but we prefer just a basic camera and Vtx to keep the weight down.
Performance wise, this thing is FAST. FAST fast. There are probably other things in this size class that are faster in a straight line, but that's not what we mean by fast. It’s like flying a laser pointer, it just does EXACTLY what you want it to do with absolute precision. Throttle control is also exquisite. It's a bit difficult to explain all the performance in words but when you fly one, you'll understand. The performance profile on a low weight load out also fits a Betaflight stock tune with just a little more TPA.Durability is one area that may be in question and is where we need to put a little bit of a disclaimer on this style build. When built to top spec on 3S, this thing is VERY FAST and INSANELY AGILE. This build is designed for advanced pilots but it doesn’t mean that it’s weak or not for beginners. That’s actually far from true. The frame is quite robust, motors are quality built and even the prop shaft is beefed up. When you first learn to ski or snowboard, you fall. You fall a LOT. It hurts. As you improve, you learn how to fall. Pro level athletes do amazing things and also know how to fall amazingly well. As an FPV pilot, you learn how not to break your equipment….or, balls to the wall and you know you’re going to break it and are okay with it. To achieve this level of performance, high durability has been replaced with repairability. It definitely still takes quite a bit of force to break an arm. The extremely low weight means that if you’re a beginner and running 2S, it’ll be quite difficult to break. It really only becomes a hazard to itself when you're darting around at high speeds.This thing is so incredibly easy to fly with its low weight and incredible control, it’s exactly what the advanced pilot needs to push their own limits and exactly what the novice wants to learn on.
Check out all our 2-3" Frame Kits and the rest of our FPVCycle Collection
Features
Multi Unit design
T700 carbon in 0.5mm laminate thickness (thinner is better, typical is 1.5mm)
~9-10g built frame base with hardware (some variation)
1.5mm body plates, 2.5mm arms
Accepts 1”x1” typical whoop mounting platform
Good quality carbon but no chamfers to keep costs down
Made to be used. Not a shelf ornament.
Every line on this design is very delicately crafted for optimization
Repairability when you smash it
Skinnier arms for less thrust deflection and rotational drag
Similar weight to a monobody of the same or lesser durability
Cheaper to maintain
Easier to repair and maintain
Doesn’t ruin your flying day due to a crash
Recommendations
Under 109g AUW with 3S 450mah
Under 95g on 2S 450mah
No smaller or larger than 450mah cells in 3S or 2S
Press fit props on a 2mm prop shaft motor
No more than ~7g per motor
NO TPU SHOES ON THE ARMS!
Includes
1x FPV Cycle Toothpick 3 3" Frame - TP3
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame.
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Features
65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most; connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct
Recommended Part List
Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)
Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color
HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 65 Micro Frame Kit - Choose Your Version
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 65 Pro Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Pro Whoop Micro Frame Kit and Meteor65 Pro Whoop frame.
Note: This is designed for prop guards that fit 35mm props like the Meteor65 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro version has been squished to the max to fit 35mm props with Meteor 65 Pro ducts.
Check out our other Micro frames, and our Fractal Engineering Products!
Features
A variant of the Fractal 65 frame kit
Squished to the max to fit 35mm props with Meteor 65Pro ducts
Maintains 65mm motors distance to meet racing specs
Still fits the camera between the front ducts 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most; connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct
Recommended Part List
BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
Specifications
CF Weight: 1.8g
Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
Stack Size: 25x25mm
Includes
1x Fractal Engineering Fractal 65 Micro Frame Kit - Choose Your Version
