RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set
This is an optional RPM Threaded Hinge Pin Set for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back!
Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer A-arm hinge pin location. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).
This product was added to our catalog on December 16, 2021
RPM70562, RPM Traxxas X-Maxx Castle Mamba Monster X8S ESC Cage (Black)
This ESC Cage, designed to protect and secure the ESC body only, leaving the fan free for easy removal for wet running. RPM left the front, rear and sides of the ESC open to allow critical air movement, keeping your machine cool and in running order. An encased on/off switch mount and antenna relocation plate are also included for further optimization.
While most mounts require double-sided tape for installation, this set-up ESC Cage for the Traxxas X-Maxx provides a solid, positive mount, locking your valuable ESC in place. Dual clamp plates prevent a massive slam from ejecting the ESC.
Tech Notes: The RPM ESC Cage for the Mamba X 8S ESC works with Castle ESCs from the following Castle part numbers:
CSE010-0165-00
CSE010-0165-01
This ESC Cage is guaranteed to fit the Traxxas X-Maxx running the stock TRA7724 Traxxas Receiver Box Lid and TRA7714 Chassis Support Braces only.
Features:
Provides a solid, positive mount to keep your valuable ESC in place
Allows the ESC to be run with or without a fan.
Air channels along the sides of the ESC allow air movement and help keep the ESC cool.
Includes a separate, encased on/off switch mount and antenna relocation plate.
This product was added to our catalog on April 16, 2021
RPM80434, Shock Shaft Guards: Traxxas X-Maxx, Green
This is an optional pack of RPM Green X-Maxx Shock Shaft Guards, intended for use with the Traxxas X-Maxx 8S 4WD Monster Truck. Protect your shock shafts and seals from running damage and the deteriorating elements with this simple design. This part replaces the stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well.
The front shield of the guard covers over a impressive 100° of frontal exposure. That means rocks and debris thrown from the front tires or competitors won’t ever hit your shock shafts. RPM Shock Shaft Guards are zero friction protection devices, meaning these guards never touch the working elements of the shocks. As an added bonus, RPM increased the length of the tubular spring support of the spring cup by nearly 2mm (5/64”). The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal.
Features:Over 100° of frontal protectionZero friction protection devicesIncreased spring cup spring supportFits stock Traxxas X-Maxx GTX shocksSold in pairs
This product was added to our catalog on December 16, 2021
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
Features:
Replaces stock Traxxas TRA7737
Includes gigantic 20x32x7mm inner bearings
Massive steering support ribs for the strongest possible carriers
Outer bearings not included (Stock bearings are used)
Sold in pairs (1 Left/1 Right)
This product was added to our catalog on May 18, 2021
RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732)
RPM Traxxas X-Maxx Oversized Inner Bearings are replacement bearings for X-Maxx trucks equipped with optional RPM Traxxas X-Maxx Oversized Axle Carriers (RPM81732).
NOTE: These bearings are 20x32x7mm in size and are not compatible with stock Traxxas axle carriers (TRA7752).
This product was added to our catalog on December 16, 2021
RPM81732, RPM Traxxas X-Maxx Oversized Rear Axle Carriers
RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of this beast of a truck. The first being durability - these carriers are designed to handle some serious abuse. RPM Oversized Axle Carriers feature massive support ribs for the strongest possible carriers available.
The other major improvement is larger inner axle bearings. The stock inner bearings are a mere 20x27x4mm. The oversized bearings are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock.
RPM Oversized Rear Axle Carriers are molded in black and backed by the RPM limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx.NOTE: RPM Oversized Rear Axle Carriers replace the stock Traxxas TRA7752 part. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (TRA5106 or TRA5106A) and are not included in this kit.
This product was added to our catalog on December 16, 2021
RPM82352, RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2)
RPM Traxxas X-Maxx Upper & Lower A-Arms were developed to handle the weight and the punishment the massive X-Maxx trucks can dish out. Starting with the upper A-arm, RPM used their proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! The lower A-arm has better ground clearance than stock A-arms and has a cross section based off of the proven RPM 1:5 scale HPI Baja A-arms so you know they’re tough! They also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. They’re also universal fit, which means they’ll fit on any corner of your truck!
RPM X-Maxx A-arms are molded in RPM's trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by their industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!NOTE: Each package comes with one upper and one lower A-arm. Four packages will be needed to complete one full vehicle.
Features:Stronger than stockLighter than stockSold with 1 – upper and 1 – lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas TRA7729Replaces the lower a-arm from stock Traxxas TRA7730 & TRA7731
This product was added to our catalog on December 16, 2021
RPM82355, RPM Traxxas X-Maxx Upper & Lower A-Arms (Blue) (2)
RPM Traxxas X-Maxx Upper & Lower A-Arms were developed to provide customers with stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. These X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, RPM used their proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it. The lower A-arm has better ground clearance than the stock arm and has a cross section based off of the proven RPM 1:5 scale HPI Baja A-arms. They also added a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. They’re also universal fit, which means they’ll fit on any corner of your truck! No more worrying which arm fits where.
RPM X-Maxx A-arms are molded in RPM's trademark blend of tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by RPM's industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!
NOTE: Each package includes one upper and one lower A-arm. Four packages will be needed to complete one full vehicle.
This product was added to our catalog on December 16, 2021
Traxxas X-Maxx Sealed Bearing set
(7) 5x11x4
(2) 6x13x5
(3) 10x15x4
(1) 12x18x4
(8) 15x24x5
(4) 17x26x5
(4) 20x27x4
You are purchasing the bearings listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
Part #: TFE4324
TFE4324, FastEddy Traxxas X-Maxx Bearing Kit
This product was added to our catalog on December 16, 2021
TRA2085, Traxxas 2085 Digital High Torque Waterproof Servo (X-Maxx/XRT Mount)
Replacement waterproof digital high-torque servo with ball bearings and aluminum cooling fins. (requires Maxx® mount)
This product was added to our catalog on May 7, 2021
TRA2085R, Traxxas X-Maxx, XRT, and Maxx Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof
High Torque: 650 oz-in
78% more torque than stock 2085
High Speed: 0.13 sec/60°
30% faster than stock 2085
All metal gears with steel output gear and spline
Blue-anodized aluminum center case
Dual ball bearings
Includes metal steering link and heavy duty servo saver spring
Fits X-Maxx, XRT, and Maxx
This product was added to our catalog on May 7, 2021
TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.
The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA2087X, Traxxas TRA2085/TRA2085X Metal Servo Gear Set
Replacement metal gear set for 2085X servo. Gears can also be used to upgrade 2085 servo. (Must swap all gears)
This product was added to our catalog on September 7, 2021
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mm
Weight: 16.8g
This product was added to our catalog on April 7, 2021
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle.
Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
(L) 185mm x (W) 50mm x (H) 44mm
675 Grams (average)
Accessory part for these models:
Traxxas Maxx
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on April 7, 2021
TRA3474, Traxxas Velineon 1200XL Dual Cooling Fan Kit
Traxxas Velineon 1200XL Dual Cooling Fan Kit.
This product was added to our catalog on September 7, 2021
TRA3475, Traxxas Velineon VXL-8S Cooling Fan
Fits:
Traxxas Maxx
Traxxas Sledge
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA3491, Traxxas Velineon 1200XL Brushless Sensorless Motor (X-Maxx/XRT)
Traxxas Velineon 1200XL 1275kV Brushless Sensorless Motor. This replacement motor is intended for the Traxxas X-Maxx and XRT 8S monster truck platforms. Package includes one Velineon 1200XL 1275kV brushless Sensorless motor.
This product was added to our catalog on September 7, 2021
TRA3496, Traxxas X-Maxx Velineon VXL-8s Waterproof ESC
This is the Traxxas X-Maxx Velineon VXL-8s Waterproof ESC. The Velineon VXL-8s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-8s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushless systems. The VXL-8s comes with the peace-of-mind of the Traxxas Lifetime Electronics Warranty and unmatched Traxxas customer support.
The VXL-8s is not a toy. It is a sophisticated electronic device capable of delivering large amounts of current. Children under 14 years of age require adult supervision for use of the VXL-8s.
Real-Time TelemetryThe VXL-8s now supports real-time telemetry capability using the optional 6511 Wireless Module (sold separately) installed in a Traxxas TQi transmitter. Use the free Traxxas Link App to download the telemetry update to the ESC. Receive speed, RPM, voltage and ESC temperature telemetry directly on your mobile device while you drive and best of all, no additional sensors are required. The Traxxas Link App makes it easy to update your VXL-8s with the newest features.
Specifications:
Input voltage: 4S/6S/8S LiPo (max. 33.6 volts)
Supported motors: Sensorless brushless
Battery connectors: Traxxas High-Current Connector
Motor connectors: TRX 6.5mm bullet connectors
Motor/battery wiring: 10-gauge Maxx® Cable
Thermal protection: 2-stage thermal shutdown
Case size (l/w/h): 58mm (2.28”)/ 72mm (2.83”)/ 46mm (1.81”)
Weight: 182g (6.42oz)
This product was added to our catalog on April 12, 2021
TRA3496T, Traxxas XRT Velineon VXL-8s Waterproof ESC
This is the Traxxas XRT Velineon VXL-8s Waterproof ESC. The Velineon VXL-8s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-8s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushless systems. The VXL-8s comes with the peace-of-mind of the Traxxas Lifetime Electronics Warranty and unmatched Traxxas customer support.
The VXL-8s is not a toy. It is a sophisticated electronic device capable of delivering large amounts of current. Children under 14 years of age require adult supervision for use of the VXL-8s.
Specifications:
Input voltage: 4S/6S/8S LiPo (max. 33.6 volts)
Supported motors: Sensorless brushless
Battery connectors: Traxxas High-Current Connector
Motor connectors: TRX 6.5mm bullet connectors
Motor/battery wiring: 10-gauge Maxx® Cable
Thermal protection: 2-stage thermal shutdown
Case size (l/w/h): 58mm (2.28”)/ 72mm (2.83”)/ 46mm (1.81”)
Weight: 182g (6.42oz)
This product was added to our catalog on April 12, 2021
TRA4611, Traxxas 5x11mm Ball Bearing (2)
This is a set of two replacement 5 x 11 x 4mm ball bearings from Traxxas. These bearings are used inside the transmission.
Fits:
Traxxas E-Maxx
Traxxas Jato
Traxxas Nitro 4-Tec
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Stampede
Traxxas Revo Nitro
Traxxas T-Maxx
Traxxas X-Maxx
This product was added to our catalog on September 7, 2021
TRA6448, Traxxas Mod 1.0 Spur Gear (50T)
Traxxas XO-1 Mod 1 Spur Gears are available in 46, 50 or 54 tooth count options to fine tune the gear ratio of your model.
Effects of Spur Gear Changes
Gear
Effects
Larger Spur
Increased acceleration
Decreased top speed
Use on smaller tracks for more punch
Use with larger pinion to get more overall torque, while maintaining the same gear ratio
Smaller Spur
Decreases acceleration, but smoother
Increases top speed
This product was added to our catalog on April 17, 2021
TRA6449X, Traxxas Mod 1.0 Spur Gear (54T)
Replacement part for these models:
X-Maxx®
Accessory part for these models:
Maxx®
This product was added to our catalog on September 7, 2021
TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T)
Traxxas Machined Mod 1.0 Pinion Gear with 5mm Bore. This is an optional machined pinion gear intended for the Traxxas E-Revo 2.0 and the Traxxas Maxx. The gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one pinion gear.NOTE: For use with steel spur gears.
Traxxas E-Revo VXL 2.0
Traxxas X-Maxx
Traxxas XO-1
Traxxas XRT
This product was added to our catalog on September 7, 2021
TRA6531, Traxxas X-Maxx Temperature/Voltage Sensor
This is a replacement temperature and voltage sensor wire for the Traxxas X-Maxx.
This product was added to our catalog on September 7, 2021
TRA6552, Traxxas X-Maxx/XRT Expander Box Seal Kit
Refresh your Telemetry Expander Module with this seal kit. Includes new O-rings, seals, and silicone grease.
This product was added to our catalog on September 7, 2021
TRA6590, Traxxas High-Voltage Power Amplifier
This is a Traxxas High-Voltage Power Amplifier, intended for use as a replacement with the Unlimited Desert Racer and as an accessory part for the Maxx and X-Maxx kits. This will allow you to change lighting modes on the fly when using the Traxxas Link app.
This product was added to our catalog on March 20, 2020
TRA7712, Traxxas X-Maxx Tailgate Protector
The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added durability. Includes 3x8 mm screws (4).
This product was added to our catalog on September 7, 2021
TRA7713X, Traxxas X-Maxx Rear Body Support
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware.
Includes:
Rear body Support
(2) 3x15mm CS
(2) 3x15mm flat-head machine
This product was added to our catalog on September 7, 2021
TRA7720X, Traxxas Front Upper Bulkhead (XRT/X-Maxx)
Traxxas Front Upper Bulkhead. This replacement upper bulkhead is intended for the front of the Traxxas XRT or X-Maxx.
Package includes one bulkhead.
This product was added to our catalog on March 11, 2022
TRA7724, Traxxas X-Maxx/XRT Receiver Box Set
Receiver box cover includes wire cover, foam pads, silicone grease, and 3x15 screws (4)
This product was added to our catalog on September 7, 2021
TRA7727R, Traxxas Rear Upper Bulkhead (X-Maxx/XRT)
Rear upper bulkhead fits 8s X-Maxx® and XRT®
This product was added to our catalog on April 26, 2021
