103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available)
36″ Reinforced Deep-V Hull
Made from lightweight vacuum-formed ABS
Self-righting flood chamber
Pre-applied graphics
Quick-release electronics tray
Rigid Injection-Molded Clipless Hatch
Four quick-release hatch nuts with tool
Foam seal keeps water out
Includes optional tool-free wingnuts
Up to 50 MPH with Dual 3s LiPo Batteries
VXL-6s™ Marine Electronic Speed Control
Water-cooled case
Three drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse (patented)
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 14 cells (16.8 volts)
LiPo battery packs: 4-6 cells (14.8 to 22.2 volts)
Velineon 540XL Brushless Motor
Ultra high-temperature sintered Neodymium magnets
Efficient, high-speed ball bearings
1800 kV
5 mm output shaft
Water-cooled jacket
Traxxas Stability Management (TSM)
Improves straight line acceleration
Never dulls throttle or slows the vehicle
Adjusts from off to 100% assistance from the transmitter
TQi 2.4 GHz Radio System
2-channel transmitter
5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
Automatically stores and loads settings for up to 30 Traxxas Link enabled models
Programmable multi-function knob
Patented waterproof receiver box
Extra-Long 218 mm Battery Tray
Centralizes battery weight
Allows fore and aft battery positioning
Accommodates multiple battery configurations
Secure hook and loop straps
Driveline
Heavy duty 4.7 mm diameter flex shaft
Quick-release motor collet
Blue-anodized aluminum drive strut
Low-maintenance bushings
High performance prop
Steering
Waterproof digital 2056 servo
Blue-anodized aluminum rudder with water pickup
Precision-Cut Stainless Steel Trim Tabs and Turn Fins
Stainless Steel Hex Hardware Used Throughout
This product was added to our catalog on March 14, 2024
HRASPN1000ME, Hot Racing Traxxas Spartan/M41 Pro Brass Prop w/Nut & Drive Dog (Brass/Blue)
This is an optional Hot Racing 42x63mm Polished Brass Propeller, intended for use with the Traxxas DCB M41 and Spartan boats as a replacement for the stock plastic part. This part has been machined out of polished brass and includes an aluminum conical M4 propeller nut and drive dog, both anodized blue for added strength and style.
Features:
CNC machined from polished brass
Anodized blue CNC machined Aluminum conical prop nut and drive dog
Replaces factory plastic propeller
Replaces factory hex nut with hydro dynamically efficient conical nut for reduced drag
Specifications:
Prop diameter: 42mm (1.65 inches)
Prop pitch: 63mm (2.48 inches)
Weight: 9g (0.32 oz)
Prop nut length: 18.3mm (0.72 inch)
Prop nut diameter: 8mm (0.31 inch)
Includes:
(1) CNC brass prop
(1) Aluminum bullet prop nut
(1) Aluminum drive dog
(1) stainless steel setscrew
This product was added to our catalog on July 23, 2021
HRASPN28WE06, Hot Racing Traxxas Spartan/M41 Aluminum Dual Water Cooling Outlet
This is an optional Hot Racing Aluminum Dual Water Outlet for the Traxxas Spartan and M41.
Features:
CNC machined billet aluminum construction
Dual water outlet
Blue anodized finish for durability, corrosion resistance, and great looks
Replaces factory plastic component
Requires:
Drilling an additional hole in the boat hull
Adding a second water line
Comments: For ultimate cooling, combine with Hot Racing dual pickup rudder blade and HRASPN36WC01 CNC milled aluminum cooling jacket.
This product was added to our catalog on December 16, 2021
HRASPN311AR06, Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set (Blue)
Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set.
Features:
Adjusts angle of trim tab assembly for proper hull planing
CNC machined aluminum construction
Pre-drilled for mounting
Anodized blue for durability, corrosion resistance, and great looks
Specifications:
Weight: 0.78oz
length: 33mm (1.30 inches)
width: 30mm (1.18 inches)
height: 24.5mm (.96 inches)
NOTE: Use the stock 4x12mm screws to mount
This product was added to our catalog on December 16, 2021
HRASPN38SD06, Hot Racing Traxxas Spartan Adjustable 5mm Bearing Stringer Drive
This is the Hot Racing Adjustable 5mm Bearing Stinger Drive for the Traxxas Spartan Deep V Racing Boat.
This product was added to our catalog on December 16, 2021
HRASPN48DR06, Hot Racing Traxxas Spartan Aluminum Dual Pickup Rudder Blade
This is the optional Hot Racing Aluminum Dual Pickup Rudder Blade for use with the Traxxas Spartan Boat.
Features:
CNC machined billet aluminum construction
Dual water pickup for additional cooling
Blue anodized finish for durability, corrosion resistance, and great looks
Direct installation with no modification necessary
Specifications:
Width of top of rudder blade: 30.8mm (1.21 inches)
Width of bottom of rudder blade: 25.3mm (1.00 inches)
Total rudder length: 100mm (3.94 inches)
Requires:
Adding a second water line and a water outlet
Installing and attaching linkage, water line, and dual water outlet
Comments:
Replaces Traxxas factory TRA5740 rudder blade
For ultimate cooling, combine with Hot Racing SPN36WC01 CNC milled aluminum cooling jacket and SPN28WE06 dual port cooling outlet
This product was added to our catalog on March 16, 2021
HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins
Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins will help your boat turn faster, provide better straight-line handling, and will increase overall stability.
Features:
Increases performance and handling
CNC machined aluminum construction
Blue anodized finish
Easy to install
Light weight
Adjustable
Includes:
(2) aluminum turn fins
(2) aluminum turn fin mounting brackets
(2) 3mm lock nuts
(2) socket head cap screws
This product was added to our catalog on March 16, 2021
TRA10349, Traxxas Wire Harness, LED lights/ zip ties (8) (fits #10350 boat trailer)
Give your Traxxas boat trailer even more scale detail with this LED light kit.
This product was added to our catalog on July 20, 2024
TRA10398, Traxxas Boat Trailer Hardware Kit, Stainless Steel (contains all stainless steel hardware used on #10350 and #10650 boat trailers)
This product was added to our catalog on August 22, 2024
TRA5711X, Traxxas Spartan Assembled Hull (White)
This is a replacement Traxxas Assembled Hull, and is intended for use with the Traxxas Spartan electric boat. This hull comes fully assembled and white with no graphics or decals applied.
This product was added to our catalog on September 7, 2021
TRA5728, Traxxas Drive Dog
This is a replacement Traxxas Drive Dog, and is intended for use with the Traxxas Spartan. This package includes a 4.3mm stainless steel grub screw with factory applied threadlock.
This product was added to our catalog on September 7, 2021
TRA5733, Traxxas 42x59mm Propeller
This is a replacement Traxxas 42x59mm Propeller, and is intended for use with the Traxxas Spartan.
This product was added to our catalog on September 7, 2021
