95076-4, Traxxas Sledge RTR 6S 4WD Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio. (#TRA2872X Batteries x 2 Required)
The Traxxas Sledge RTR 6S 4WD Electric Monster Truck, is an all out basher designed to give you the power and performance for serious off-road fun. This monster truck features a rock solid chassis, massive steel drivetrain, 6S power system and race inspired handling. These features lead to a truck that is designed to push the limits of off-road bashing and look good in the process. Pick up the Traxxas Sledge and leave everything else in the dust.
Powering this monster truck is a Traxxas VXL-6S Velineon ESC and a 2000kV Brushless Motor. Traxxas then used massive steel gears, a triangulated chassis and a center T-bar brace to hold up to the 6S power. A special aluminum motor cradle is used to secure the motor in place eliminating motor flex. The drive train features a torque-biasing center differential that distribute power evenly throughout the chassis. Solid steel axles are used front, center and rear to deliver the power to the wheels. The shock towers are 5mm thick and are tied directly to the center brace for further durability. Holding the truck up are large-bore GT-Maxx aluminum shocks mounted with 4mm hardware. Traxxas left no stone unturned and developed a truck that is ready for any terrain.
Features:
1/8th Scale basher designed specifically for 6S power
20% larger and 75% thicker drive gears
Triangulated chassis structure for superior chassis strength
Remove and replace the body in just seconds with exclusive clipless body
Includes a high-performance metal gear servo that produces over 347oz-in of torque
6S power system for brutal power
Durable Sledgehammer tires are used for great handling and traction
Specifications:
Truck:
Length (including wing): 23.78 inches (604mm)
Front Track: 18.10 inches (459mm)
Rear Track: 18.10 inches (459mm)
Ground Clearance: 1.95 inches (50mm)
Weight (no battery): 12.74 pounds (5.77kgs)
Height (overall): 8.43 inches (214mm)
Wheelbase: 15.10 inches (384mm)
Shock Length (front): 5.12 inches (128mm)
Shock Length (rear): 5.67 inches (144mm)
Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm)
Wheel Diameter: 3.8 inches (97mm)
Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
ESC:
Model: Velineon VXL-6s
Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Reverse Delay: Yes, with lockout
Motor:
Type: 2000 kV sensorless brushless
Connector Type: Traxxas 6.5mm bullet connectors
Includes:
(1) Traxxas RTR Sledge Monster Truck
(1) TQi 2.4GHz radio system
(1) Jumper plug (for 4s battery use)
(1) Quick Start Guide
High quality maintenance tools
Needed to Complete:
4S: (1) 4S 6700mAh LiPo Battery with Traxxas iD Connector or (2) 2S 7600mAh LiPo Batteries with Traxxas iD Connectors
6S: (2) 3S 5000mAh LiPo Batteries with Traxxas iD Connector
(1) Compatible LiPo Balance Charger
(4) AA Batteries
This product was added to our catalog on August 16, 2022
95096-4, Traxxas Sledge RTR 6S 4WD Belted Tires Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio
The Traxxas Sledge RTR 6S 4WD Electric Monster Truck, is an all out basher designed to give you the power and performance for serious off-road fun. This monster truck features a rock solid chassis, massive steel drivetrain, 6S power system and race inspired handling. These features lead to a truck that is designed to push the limits of off-road bashing and look good in the process. Pick up the Traxxas Sledge and leave everything else in the dust.
Powering this monster truck is a Traxxas VXL-6S Velineon ESC and a 2000kV Brushless Motor. Traxxas then used massive steel gears, a triangulated chassis and a center T-bar brace to hold up to the 6S power. A special aluminum motor cradle is used to secure the motor in place eliminating motor flex. The drive train features a torque-biasing center differential that distribute power evenly throughout the chassis. Solid steel axles are used front, center and rear to deliver the power to the wheels. The shock towers are 5mm thick and are tied directly to the center brace for further durability. Holding the truck up are large-bore GT-Maxx aluminum shocks mounted with 4mm hardware. Traxxas left no stone unturned and developed a truck that is ready for any terrain.
Features:
1/8th Scale basher designed specifically for 6S power
20% larger and 75% thicker drive gears
Triangulated chassis structure for superior chassis strength
Remove and replace the body in just seconds with exclusive clipless body
Includes a high-performance metal gear servo that produces over 347oz-in of torque
6S power system for brutal power
Durable Sledgehammer tires are used for great handling and traction
Specifications:
Truck:
Length (including wing): 23.78 inches (604mm)
Front Track: 18.10 inches (459mm)
Rear Track: 18.10 inches (459mm)
Ground Clearance: 1.95 inches (50mm)
Weight (no battery): 12.74 pounds (5.77kgs)
Height (overall): 8.43 inches (214mm)
Wheelbase: 15.10 inches (384mm)
Shock Length (front): 5.12 inches (128mm)
Shock Length (rear): 5.67 inches (144mm)
Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm)
Wheel Diameter: 3.8 inches (97mm)
Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
ESC:
Model: Velineon VXL-6s
Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Reverse Delay: Yes, with lockout
Motor:
Type: 2000 kV sensorless brushless
Connector Type: Traxxas 6.5mm bullet connectors
Includes:
(1) Traxxas RTR Sledge Monster Truck
(1) TQi 2.4GHz radio system
(1) Jumper plug (for 4s battery use)
(1) Quick Start Guide
High quality maintenance tools
Needed to Complete:
4S: (1) 4S 6700mAh LiPo Battery with Traxxas iD Connector or (2) 2S 7600mAh LiPo Batteries with Traxxas iD Connectors
6S: (2) 3S 5000mAh LiPo Batteries with Traxxas iD Connector
(1) Compatible LiPo Balance Charger
(4) AA Batteries
This product was added to our catalog on August 16, 2022
HRASLG156AX01, Aluminum bleeder shock caps Traxxas Sledge
Hot Racing Traxxas Sledge Aluminum Bleeder Shock Caps. These are excellent optional upgrade for the Traxxas Sledge. Constructed from CNC machined aluminum these feature a bleeder screw giving you the option to convert your shocks over to an emulsion style. These caps fit the stock shocks with no modifications and look amazing with their machined beveled edges. Package includes two aluminum shock caps and two O-rings.
This product was added to our catalog on December 1, 2022
HRASLG2506, Hot Racing Traxxas Sledge Aluminum Differential Locker Spool
Hot Racing Traxxas Sledge Aluminum Differential Locker Spool. Designed to give your Traxxas Sledge the ultimate in traction this differential locker spool effectively locks the front, rear or center differential transferring all of the power possible to your wheels. Constructed from CNC machined aluminum and taper cut to reduce rotating mass, this locker provides excellent strength and reliability over the long run. Package includes one aluminum differential locker spool that can be used on the front, rear or center differential.
This product was added to our catalog on June 23, 2023
HRASLG48SH25, Hot Racing Traxxas Sledge Aluminum Fixed Link Servo Arm (25T)
Hot Racing Traxxas Sledge Aluminum Fixed Link Servo Arm. This optional servo arm provides more direct steering feel and precision on the Traxxas Sledge. Constructed from 6061 aluminum the fixed link and servo arm both feature superb strength and rigidity, holding up to extreme conditions. Package includes one aluminum fixed steering link, one aluminum locked servo horn and mounting hardware.
This product was added to our catalog on June 23, 2023
1.5 Mod 11:34 SS Motor Fix Mount Washer Sledge
Hot Racing Traxxas Sledge Stainless Steel Motor Locking Washers. Designed to keep your Traxxas Sledge's gear mesh locked in place these oval locking washers from Hot Racing keep your motor from moving in extreme conditions. Simply insert the washers into the bottom of the chassis and lock them down with the provided hardware. These washers are intended to work with a 1.5 Mod 13T pinion and 34T spur gear. Package includes four 16 Gauge stainless steel oval washers and four 4x16mm 12.9 class cap head screws.
This item was added to our catalog March 3, 2021
HRASSLG889B, Traxxas Sledge 1.5 Mod 13:34 SS Motor Fix Mount Washer
Hot Racing Traxxas Sledge Stainless Steel Motor Locking Washers. Designed to keep your Traxxas Sledge's gear mesh locked in place these oval locking washers from Hot Racing keep your motor from moving in extreme conditions. Simply insert the washers into the bottom of the chassis and lock them down with the provided hardware. These washers are intended to work with a 1.5 Mod 11T pinion and 34T spur gear. Package includes four 16 Gauge stainless steel oval washers and four 4x16mm 12.9 class cap head screws.
This product was added to our catalog or updated on April 4, 2022
HRASSLG889C, Traxxas Sledge Mod 1.5 and Mod 1 SS Motor Fix Mount Washer
Hot Racing Traxxas Sledge Stainless Steel Motor Locking Washers. Designed to keep your Traxxas Sledge's gear mesh locked in place these oval locking washers from Hot Racing keep your motor from moving in extreme conditions. Simply insert the washers into the bottom of the chassis and lock them down with the provided hardware. These washers are intended to work with a 1.5 Mod 12T pinion and 34T spur gear. Package includes four 16 Gauge stainless steel oval washers and four 4x16mm 12.9 class cap head screws.
This product was added to our catalog or updated on April 4, 2022
Mod 1 SS Motor Fix Mount Washer Sledge
Hot Racing Traxxas Sledge Stainless Steel Motor Locking Washers. Designed to keep your Traxxas Sledge's gear mesh locked in place these oval locking washers from Hot Racing keep your motor from moving in extreme conditions. Simply insert the washers into the bottom of the chassis and lock them down with the provided hardware. These washers are intended to work with a 1.0 Mod 13T pinion and 52T spur gear. Package includes four 16 Gauge stainless steel oval washers and four 4x16mm 12.9 class cap head screws.
This item was added to our catalog March 3, 2021
RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black)
RPM Traxxas Sledge Front Bumper and Skid Plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system.
RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection.
NOTES: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas (TRA9535).
This product was added to our catalog on January 27, 2023
TRA3475, Traxxas Velineon VXL-8S Cooling Fan
Fits:
Traxxas Maxx
Traxxas Sledge
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
Cooling fan kit (with shroud) (fits #3483 motor)
Lower your Velineon motor’s temperatures with this cooling fan and shroud for longer run times and more fun behind the wheel. Fits 9589 motor cradle.
Includes mounting screws.
TRA3478, Traxxas Sledge Cooling Fan Wiring Harness
Traxxas Sledge Cooling Fan Wiring Harness. This replacement wiring harness is intended for the Traxxas Sledge equipped with the TRA3475 Cooling Fan. Package includes one wiring harness and one zip-tie.
This product was added to our catalog on August 1, 2022
TRA3483, Traxxas Sledge 77mm Brushless Motor (2000Kv)
Traxxas 2200kv 77mm Brushless Motor. This is a replacement motor used on the Traxxas Sledge. Features include pre-installed 6.5mm gold plated connectors and a high efficiency heatsink motor can. Package includes one complete motor.
Fits:
Traxxas Sledge
This product was added to our catalog on June 30, 2021
TRA3484, Traxxas Sledge Velineon VXL-6s ESC Brushless Power System, waterproof (includes VXL-6s ESC and 2000Kv, 77mm motor)
Replacement part for these models:
Traxxas Sledge
This product was added to our catalog on April 11, 2021
TRA7758, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Blue) (4)
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.
This product was added to our catalog on September 7, 2021
TRA7758-GRAY, Wheel nuts, splined, 17mm, serrated (gray-anodized) (4)
Wheel nuts, splined, 17mm, serrated (gray-anodized) (4)
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.
This product was added to our catalog on March 19, 2024
TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4)
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.
This product was added to our catalog on September 7, 2021
TRA7758G, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Green) (4)
Wheel nuts, splined, 17mm, serrated (green-anodized) (4)
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.
This product was added to our catalog on September 7, 2021
TRA7758R, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Red) (4)
Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut. These optional wheel nuts are intended for the Traxxas Sledge, X-Maxx or E-Revo VXL 2.0. Package includes four wheel nuts.
This product was added to our catalog on September 7, 2021
TRA8654, Traxxas 17mm Splined Wheel Hub Hex (Blue) (4)
This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Blue anodize. Also included are four 4x5mm set screws and four 3x14mm pins.
NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use.
Fits:
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas Sledge
This product was added to our catalog on May 7, 2021
TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas Sledge
This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Red anodize. Also included are four 4x5mm set screws and four 3x14mm pins.
TECH NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use.
This product was added to our catalog on September 7, 2021
TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black)
This is a pack of two replacement Traxxas Talon EXT 3.8" Tires, Pre-Mounted to Black wheels with a splined 17mm hex. These tires have been glued to the wheel and include an inner foam insert. Just install and go! TSM Rated.
NOTE: These wheels only fit the Traxxas Splined 17mm Axle Hexes; they will not work with standard 17mm hexes.
This product was added to our catalog on May 7, 2021
TRA8674, Traxxas E-Revo/Sledge Paddle Tires 3.8" Pre-Mounted w/Monster Truck Wheels (Black) (Standard)
Traxxas Paddle Tires 3.8" Pre-Mounted with Monster Truck Wheels. Package includes two pre-mounted paddle tires intended for the Traxxas E-Revo VXL.
This product was added to our catalog on September 7, 2021
TRA8689, E-Revo Hardware Kit
Give your 1/10 scale E-Revo VXL a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8689X, Traxxas Hardware Kit Stainless Steel E-Revo VXL
Traxxas Hardware Kit Stainless Steel E-Revo VXL (Contains all Stainless Steel Hardware used on E-Revo VXL)
This product was added to our catalog on December 7, 2023
TRA9513, Traxxas Sledge Center Body Support
Center body support with 3x12 mm screws (8)
This product was added to our catalog or updated on April 4, 2022
TRA9513X, Traxxas Sledge Center Body Support Set
The Sledge® full body support comes assembled with front and rear latches, roof skids, and body reinforcements.
This product was added to our catalog or updated on April 4, 2022
TRA9514, Traxxas Sledge Front Body Mount
Body mount, frontReplacement front body mount
This product was added to our catalog or updated on April 4, 2022
TRA9515, Traxxas Sledge Rear Body Mount & Front Body Retainer/Shock Guard
Rear body mount with front shock guard
This product was added to our catalog or updated on April 4, 2022
TRA9519, Traxxas Sledge Rear Mud Guards (Black)
Add more style to your Sledge® with these colorful left and right rear mud guards. Includes 3x15 mm (2) and 3x25 mm (2) mounting screws.
This product was added to our catalog or updated on April 4, 2022
TRA9520, Traxxas Sledge Front Chassis Brace
Replacement front chassis brace with 4x15 mm screws (2)
This product was added to our catalog or updated on April 4, 2022
TRA9521, Traxxas Sledge Rear Chassis Braces
Rear chassis tower braces with 4x15 mm screws (4)
This product was added to our catalog or updated on April 4, 2022
TRA9522, Traxxas Sledge Aluminum Chassis
Traxxas Sledge Aluminum Chassis. This is a replacement chassis for the Traxxas Sledge. Package includes one aluminum chassis.
This product was added to our catalog or updated on April 4, 2022
TRA9525, Traxxas Sledge Aluminum Steering Posts (Blue)
Give your Sledge® a bold new look with these brightly-anodized aluminum bellcrank posts.
This product was added to our catalog or updated on April 4, 2022
TRA9526, Traxxas Sledge Steering Link
30 mm steering link with installed metal hollow balls
This product was added to our catalog or updated on April 4, 2022
TRA9527, Traxxas Sledge Aluminum Front Tie Bars (Blue)
Traxxas Sledge Aluminum Front Tie Bars. These are replacement front tie bars intended for the Traxxas Sledge. Package includes two aluminum front tie bars.
This product was added to our catalog on July 5, 2022
TRA9532, Traxxas, CASTER BLOCKS L/R
Product Information:
TRA9532, Traxxas, CASTER BLOCKS L/R
Traxxas Vehicles, Parts & Accessories
Traxxas
tra9532
UPC: 020334953209
This product was added to our catalog or updated on April 4, 2022
TRA9532X, Traxxas Sledge Aluminum Caster Blocks Left & Right (Blue) (2)
Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge®. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX® logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (4).
This product was added to our catalog or updated on February 14, 2023
TRA9535, Traxxas Sledge Front Bumper w/Skid Plate & Tie Bar Mount
This is a replacement intended for the Traxxas Sledge. Package includes one front bumper, one skid plate, one tie bar mount and mounting hardware.
This product was added to our catalog or updated on April 4, 2022
TRA9536, Traxxas Sledge Rear Bumper w/Skidplate & Tie Bar Mount
Traxxas Sledge Rear Bumper with Skidplate and Tie Bar Mount. This is a replacement intended for the Traxxas Sledge. Package includes one rear bumper, one skidplate, one tie bar mount and mounting hardware.
This product was added to our catalog or updated on April 4, 2022
TRA9537, Traxxas Sledge Left & Right Steering Blocks
Left and right steering blocks with 4x16 mm screws (4) and washers (4)
This product was added to our catalog or updated on April 4, 2022
