68277-4, Traxxas Slash 4X4 Ultimate Clipless Body RTR 4WD Short Course Truck w/TSM & TQi 2.4GHz Radio
The Traxxas Slash 4X4 "Ultimate" RTR 4WD Short Course Truck is fully loaded out of the box. The Slash Ultimate features brutal Velineon brushless power and Traxxas Stability Management (TSM) with a high-speed metal gear servo. Carve corners like a pro thanks to the low-CG chassis, installed sway bars, and ultra-smooth blue PTFE-coated aluminum GTR shocks. Slash 4X4 Ultimate packs a full complement of aluminum hop-up parts and performance accessories for added strength and show-stopping looks. Slash 4X4 Ultimate arrives fully assembled with factory-installed telemetry sensors and a Wireless Link equipped TQi 2.4GHz radio system. Simply add the battery of your choice (sold separately) and you’re ready for intense tire-scorching action.
Features:
High-volume, blue PTFE-coated aluminum GTR shocks
High-speed metal gear servo (#2075R)
Upgraded Extreme-Duty driveshafts
Heavy-duty suspension arms
Traxxas Stability Management (TSM)
Performance-optimized dark charcoal gray low-CG chassis
TQi 2.4GHz high output radio system with Traxxas Link Wireless Module™
Factory installed telemetry sensors
Telemetry-ready 5-channel 2.4GHz micro receiver
ProGraphix™ painted body
Blue-anodized 6061-T6 aluminum C-hubs
Blue-anodized 6061-T6 aluminum steering blocks
Blue-anodized 6061-T6 aluminum rear hub carriers
Blue-anodized 6061-T6 aluminum axle nuts
Adjustable front and rear sway bars
Included optional extra-stiff sway bar set
Specifications:
Length: 22.36 Inches (568mm)
Front Track: 11.65 Inches (296mm)
Rear Track: 11.65 Inches (296mm)
Center Ground Clearance: 1.85 Inches (47mm)
Weight: 80.4oz (2.28kg)
Height (overall): 7.60 Inches (193mm)
Wheelbase: 12.75 Inches (324mm)
Shocks: GTR threaded aluminum-body with titanium-nitride shafts
Shock Length: GTR Long (front), XX Long (rear)
Tires: 2.2/3.0", S1 compound, pre-glued with foam inserts
Tire Diameter: 4.31 Inches (109.5mm) (front and rear)
Wheels (front/rear): 2.2/3.0" Split-Spoke, Black Chrome
Wheel Diameter: 2.2 Inches (56mm) Outer, 3.0 Inches (76mm) Inner
Speed Control Type: VXL-3s™ Electronic Speed Control
Motor (electric): Velineon® 3500 Brushless
Overall Drive Ratio: 11.82 (stock, out-of-box)
Differential Type: Hardened steel bevel, sealed, limited slip
Gear Pitch: 32
Chassis Structure/Material: Molded tub / nylon composite
Drive System: Shaft-driven, direct drive 4WD
Steering: Dual-bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz radio system with Traxxas Stability Management®
Body: ProGraphix® pre-painted
Top Speed: 60+mph With optional gearing and 3S LiPo battery (items sold separately)
Battery Tray Dimensions: 165mm x 49.5mm x 23mm, 25mm (Battery expansion kit available)
Needed to Complete:
Traxxas battery pack w/iD connector
Traxxas iD charger
(4) "AA" batteries (for transmitter)
This product was added to our catalog on April 27, 2021
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
RCE1849BL, Slash 2/4WD Aluminum Front Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).
Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!
Features:
They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.
RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
This product was added to our catalog on March 2, 2021
Traxxas Slash 4X4 Ultimate Ceramic Rubber Sealed Bearing Kit
Steel Races and Cages combined with Ceramic Balls, Non Contact Rubber Seals , and Grease, will give you the absolute strongest and best off road performance available. We have included no contact rubber seals to keep the contamination out and the super slick grease in. This offers the outstanding durability that off road demands.This is truly a WINNING combination. The high-performance and durability of ceramic balls, and the No maintenance durability of rubber seals and grease will keep you going smoother and faster then any other bearing on the market.
(6) 5x11x4 Ceramic
(5) 10x15x4 Ceramic
(4) 6x12x4 Ceramic
(4) 5x8x2.5 Ceramic
(2) 12x18x4 Ceramic
(2) 8x16x5 Ceramic
(2) 5x10x4 Ceramic
You are purchasing the bearings listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
Part #: TFE3599
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
TRA6788, Traxxas Slash 4x4 Pro-Built Front Differential
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you to get your rig back in action faster and with less effort. These components allow you to replace parts as a complete unit, no assembly required.
This product was added to our catalog on September 7, 2021
TRA6835X, Traxxas Slash 4X4 Front Bumper (LED Compatible)
Traxxas Slash Front Bumper. This replacement front bumper is intended for the Traxxas Slash platforms.
Package includes one front bumper with a bumper mount.
This product was added to our catalog on February 9, 2022
TRA6837, Traxxas Left/Right Steering Block Set
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Slash 4X4 Ultimate
This product was added to our catalog on September 7, 2021
TRA6851R, Traxxas Slash 4x4 and Stampede 4x4 Front Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 scale trucks. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin.
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA7448, Traxxas Progressive Rate Long GTR Shock Springs (Blue - 0.892) (2)
This is a pack of two "Blue - 0.892 Rate" Traxxas Progressive Rate Long GTR Shock Springs. These are the stiffest progressive springs available for the Long shock (TRA7461X). Traxxas offers a wide variety of spring rates for the GTR shocks to provide almost limitless tuning possibilities. The springs are made from high-quality spring steel with durable powder-coated finishes, and the spring rate is indicated by colored dots on the end of the spring.
Long Spring Rates:
Softest
TRA7440: Orange - 0.623 Rate
TRA7441: Green - 0.653 Rate
TRA7444: Black - 0.767 Rate
TRA7445: Pink - 0.810 Rate
TRA7448: Blue - 0.892 Rate
Stiffest
Effects of Shock Spring Changes
Shock Spring
Characteristic
Softer
Increased Chassis Roll
Increased Traction
Better in Bumpy Conditions
More Likely to Bottom Out
Stiffer
Decreased Chassis Roll
Decreased Traction
Increased Responsiveness
This product was added to our catalog on May 13, 2021
TRA7461X, Traxxas GTR Long Hard Anodized Shocks w/Ti-Nitride Shafts (2)
Traxxas Complete GTR Long Shocks feature hard anodized PTFE coated bodies with TiN shafts. These shocks are fully assembled and ready for oil, and are compatible with the Hoss, Slash 4X4 and Rustler 4X4 models. Package includes two shocks, and shock oil, but does not include shock springs.
This product was added to our catalog on September 7, 2021
TRA7490, Traxxas Aluminum Motor Plate (Blue)X4
Fits:
Traxxas Rally
Traxxas Rustler 4x4
Traxxas Slash 4x4 Ultimate
This product was added to our catalog on September 7, 2021
TRA9069, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes (4)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes. These wheel hexes are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes four wheel hexes and four pins.
NOTE: These hexes are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on September 7, 2023
YEA-TRSL-015FBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts (Blue)
The Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts are a great option for adding strength and style to your ride. The axle section and shaft are made from tool grade steel and the outer sleeve is made from aluminum to keep the weight low. These features allow for a great balance between weight and strength. Package includes two assembled drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4.Features:
Perfect fit for the Traxxas Slash or Stampede
Steel and aluminum construction
Center section is anodized aluminum to help keep weight down
This product was added to our catalog on December 16, 2021
Yeah Racing 3mm Aluminum Threaded Rod Ends. These standard threaded rod ends are great for 3mm turnbuckles. Best results if paired with the Yeah Racing reverse thread rod ends (YEA-YA-0572DB). Package includes five aluminum rod ends.NOTE: These are standard threaded (clockwise). Please be sure of thread direction prior to purchase.Features:
Made from machined aluminum for a strong finish
Available in multiple colors to best match your build
This product was added to our catalog on December 16, 2021
