58234-8, Traxxas Slash 2WD Extreme HD (NEW)
The Slash 2WD has been upgraded with factory-installed Extreme Heavy Duty parts! This new release is part of the final wave for 2024 where we have re-energized our core lineup with clipless body mounting, Extreme Heavy Duty parts, and fresh body graphics.
Clipless Short Course Truck Body
Tough front and rear tube-style bumpers
Body reinforcements to prevent pull-through damage
Holds tight for intense action
Quick and easy removal
Smooth appearance with no body posts or clips
High-Performance Waterproof XL-5™ Electronic Speed Control
Innovative waterproof design
Three drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse (patented)
Traxxas EZ-Set® one-button setup
LiPo and NiMH compatible with two-stage low-voltage detection
Titan® 550 Motor
Powerful Titan 12T 550 modified motor with internal cooling fan
Oversized armature for big torque and increased power handling
Virtually maintenance-free operation
Molded wire retainer keeps motor wires secure
Includes Battery and USB-C Charger
4-amp USB-C fast charger
3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD®
Extreme Heavy Duty Parts Installed
Strengthened C-hubs, axle carriers, and steering blocks
HD suspension arms
TQ™ 2.4 GHz 2-Channel radio system
Ergonomic transmitter with internal antenna
Traxxas 6519 3-channel micro receiver with fail-safe security
Patented O-ring sealed watertight receiver box keeps receiver dry
Tough Fiber-Composite Monocoque Chassis
Long 13.2″ wheelbase for increased stability
Over 3.5-inches of ground clearance
Easy Access Battery Compartment
Adjustable battery hold down
Accepts 6- and 7-cell flat packs and 7-cell hump packs
Accepts many 2s LiPo battery configurations
Transmission and Driveline
Brushless-ready Magnum 272™ metal-gear transmission
Torque-Control™ slipper clutch system
Planetary gear differential with steel ring gear
Sealed gearbox protects the transmission with beefed up motor guard
External gear cover with easy clutch access
Heavy-duty telescoping U-joint driveshafts and yokes
Steering
Digital High-torque waterproof Traxxas 2075 steering servo
High-performance bellcrank system minimizes bump steer
Suspension
Adjustable steel turnbuckles
Captured rod ends won't pop off
Springs and Shocks
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
Race-tuned progressive rate white powder-coated springs
Wheels and Tires
Pre-glued scale all-terrain tires with performance foam inserts
2″ outer diameter, 3″ inner diameter dual-profile SCT wheels
Rubber-Sealed Ball Bearings
Precision Hex Hardware
This product was added to our catalog on September 6, 2024
58276-74, Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck w/Magnum 272R, TQi 2.4GHz Radio & TSM
The Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck has been designed to give you the look and feel of the intense, high flying off road action. Since its introduction, the Slash has set the standard for durability, performance, and technology. Build on the proven Slash chassis, this short-course truck has been given the Traxxas Magnum 272R transmission. The all metal gear transmission is used to deliver competition grade performance to your Slash VXL.
At first glance, this Traxxas Slash chassis features an updated dual-bellcrank steering, updated heavy duty driveshafts, sealed beveled gear differential, torque control slipper and oil filled ultra shocks. Powering this chassis is the reliable Velineon Brushless Power System. The VXL-3S ESC supports up to a 3S LiPo and comes in a waterproof case. The Velineon 3500 Motor has been optimized for power and efficiency is 1/10th scale vehicles.
Features:
Magnum 272R transmission
Aluminum motor plate
All-metal internal gears
Sealed beveled-gear differential
ProGraphix paint
Velineon brushless power system
Traxxas Stability Management TSM
TQi 2.4GHz transmitter and receiver
Waterproof electronics
Digital high-torque waterproof steering servo
Precision steel turnbuckles with heavy-duty rod ends
100% Fully assembled and Ready-To-Race
Specifications:
Length: 22.4 inches (568 mm)
Front Track: 11.65 inches (296 mm)
Rear Track: 11.65 inches (296 mm)
Wheelbase: 13.2 inches (335 mm)
Height (overall): 8.43 inches (214 mm)
Weight: 90.4 ounces (2.56 kg)
Front Tires: Slash 2.2 (Pre-Glued with Inserts)
Rear Tires: Slash 2.2 (Pre-Glued with Inserts)
Front Wheels: 2.2" Satin or Chrome-Finish
Rear Wheels: 2.2" Satin or Chrome-Finish
Gear Ratio (internal): 2.72 (final drive: 10.2)
Gear Pitch: 48-Pitch
Center Ground Clearance: 3.5 inches (89 mm)
Top Speed: 60+mph (with 3S 5000mAh LiPo Battery, 31T Pinion and 76T Spur)
Skill Level: 1
Battery Tray Dimensions: 165x49.5x23mm
Includes:
(1) Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck
Needed to Complete:
6 to 7 cell NiMH or 2S/3S LiPo battery & Charger with Traxxas iD connectors
(4) "AA" batteries for transmitter
This product was added to our catalog on July 7, 2022
HRATE1901, Hot Racing Traxxas Slash 2wd Aluminum Multi Mount Caster Blocks (Black)
Traxxas BanditTraxxas Nitro SlashTraxxas Rustler 2wdTraxxas Slash 2wdTraxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRATE311R01, Hot Racing Aluminum Speed Run Wheelie Bar (2wd Slash, Rustler, Bandit)
The Hot Racing Aluminum Speed Run Wheelie Bar is an optional upgrade for Traxxas 2WD LCG Slash, Rustler and Bandit models.
Features:
CNC Machined aluminum construction
180mm in length with an 0 to 10 deg adjustable angle
Side or center wheel setup options, and a solid aluminum ladder frame construction
NOTE: This part Is for Speed Run/Drag Racing and is NOT recommended for off-road use.
This product was added to our catalog on March 21, 2022
HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)
The Hot Racing Traxxas Power Up Gear Adapter fits the 1/10 Traxxas Bandit, Jato 3.3, Rustler, Slash 2WD, and Stampede 2WD.
Features:
Eliminates the transmission slipper assembly to transmit all power to wheels without slip
Lighter rotating mass for faster acceleration
Great for stock off road classes or oval racing!
CNC machined 6061 aluminum, anodized blue
NOTE:
Please note the slipper function is eliminated, placing additional strain on drivetrain components which may lead to increased wear
Fits vehicles using Traxxas 5556 slipper. Completely replaces slipper assembly, including pressure plates and slipper pads
Fits: Bandit, Jato 3.3, Rally, Rustler, Slash 2WD and Stampede 2WD
This product was added to our catalog on March 6, 2021
TRA2479T, Traxxas Tires+Wheels 2.2In Black Chrome Wheels
Tires & wheels, assembled (2.2" black chrome wheels, Anaconda® 2.2" tires with foam inserts) (2) (Bandit® front))Anaconda® performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires come mounted and pre-glued on 2.2″ black chrome multi-spoke front wheels for no-hassle, out-of-the-box bolt-on traction. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience.
This product was added to our catalog on April 15, 2021
TRA3631X, Traxxas HD Cold Weather Front Suspension Arm Set (Black)
This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and Rustler feature an updated design which incorporates the latest proprietary composite material, available in multiple colors. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it off a curb, or preparing for the next speed run, these arms were built for extreme wear.
This product was added to our catalog on September 7, 2021
TRA3635, Traxxas Bumper Fr/Mnt/4X12ccs/4X22bcs/3X12bcs (for LED light kit installation)
Traxxas Bumper Fr/Mnt/4X12ccs/4X22bcs/3X12bcs
This product was added to our catalog on March 25, 2021
TRA5830, Traxxas Slash 2WD LCG Conversion Kit
This is an optional Traxxas Slash 2WD LCG Conversion Kit. Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash trucks! The Low-CG Conversion Kit lowers the chassis, battery, and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks including the Slash, Raptor, and Robby Gordon Edition Dakar Slash. No matter where you want to race, on the track or off, you will experience superior handling and better corner speed. The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration.
The complete Low-CG Conversion Kit includes a blue low-CG chassis, black nerf bars and lower chassis, battery hold down, optimized low-CG front shock springs, and hardware. For personalized Slash low-CG chassis customization, the low-CG chassis, lower chassis, and nerf bars are also available separately in three colors: black, blue, and grey.
Features:
Complete kit, no additional parts required
Lowers chassis over one inch (1.3 in/33mm)
Battery positioned 45% lower compared to standard chassis
Low-CG enhances handling and increases cornering speed
Genuine Traxxas quality and precision
This product was added to our catalog on May 7, 2021
TRA5836, Traxxas Rear Bumper w/Mount (Black)
This is a replacement Traxxas Rear Bumper Set, including the bumper mount.
This product was added to our catalog on September 7, 2021
TRA5837, Traxxas Front & Rear Skid plate Set (Black)This is a replacement Traxxas Skidplate Set. This set includes the front and rear skidplates.
This product was added to our catalog on May 7, 2021
TRA5894, Traxxas Slash LED Light Kit w/Front & Rear Bumpers
Traxxas Slash LED Light Kit with Front and Rear Bumpers. These replacement bumpers are intended for the Traxxas Slash 2WD. Four LEDs are installed to the front bumper and two LEDs are installed to the rear bumper. The LEDs are factory installed and pre-wired for ease of use. Package includes one front bumper, one rear bumper, One Y-harness and hardware.
This product was added to our catalog on April 12, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA6876, Traxxas BFGoodrich KM2 Tire w/SCT Rear Wheel (2) (Chrome/Green) (Standard)
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on SCT Chrome Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are the fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created in high grip rubber.
The design of the SCT wheel features a chrome center and color molded beadlock detail for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on September 7, 2021
TRA9069, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes (4)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes. These wheel hexes are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes four wheel hexes and four pins.
NOTE: These hexes are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on September 7, 2023
Traxxas Aluminum Steering Bellcrank Set w/Bearings
The Traxxas Aluminum Steering Bellcrank Set with Bearings is a machined aluminum upgrade for the Rustler, Bandit, Nitro Slash, and Slash models. This bellcrank set will enhance steering precision, strength, and looks. These ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life.
Fits:
Traxxas Bandit
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
The pre-assembled units are easy to install, include detailed installation instructions, and are available in a variety of anodized colors with laser-etched Traxxas logo.
This product was added to our catalog on April 12, 2021
