TRA3953, Traxxas Revo 36 tooth Spur Gear (1.0 metric pitch)
Replacement part for these models:
Slayer® Pro 4X4
Accessory part for these models:
Revo®
This product was added to our catalog on September 7, 2021
TRA4146X, Traxxas Clutch shoes (2)/ spring
This is a set of replacement clutch shoes and clutch spring for the TRX 2.5 racing engines used in Traxxas vechiles. This is all the replacement shoes for the Traxxas Revo monster trucks.
This product was added to our catalog on May 1, 2021
TRA5134, Traxxas Caster spacers (4)/ shims (4))
This is a pack of four replacement caster spacers and four replacement shims for the Traxxas Revo monster trucks. These spacers are used to adjust the caster angle and for the front of the truck as well as correctly space the rear arms on the bulkheads.
Fits:
Traxxas E-Revo VXL 2.0
Traxxas Revo Nitro
This product was added to our catalog on May 7, 2021
TRA5214, Traxxas Clutch Bell (14T) 5x8x0.5mm fiber washer, 5mm e-clip (use 5x10x4mm bearings)
This is an optional 14-tooth clutch bell for the Traxxas monster trucks, such as the Traxxas Revo. Also included are two 5x8x0.5mm fiber spacing washers and a 5mm E-clip to attach the clutch bell to the front of the crankshaft. This clutch bell requires 5x10x4mm ball bearings.
This product was added to our catalog on May 7, 2021
TRA5217, Traxxas Revo Nitro 17T Clutch Bell
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust the final drive ratio for added tuning benefits. The out-of-the-box clutch bell gear is a 15-tooth for the Revo and Slayer. (requires 5x11x4mm ball bearings part #TRA4611)
This product was added to our catalog on September 7, 2021
TRA5245X, Traxxas Molded Pipe Coupler (Black) w/ Exhaust deflector & long cable ties
This is an optional black rubber exhaust coupler and black rubber exhaust deflector for the Traxxas Revo monster truck. Also included are two short and two long zip ties for connecting the couplers. These are the same as the stock parts that come on the truck, but the stock ones are blue.
This product was added to our catalog on May 7, 2021
TRA5256, Traxxas Revo Nitro O-ring, header 12.2x1mm (TRX 2.5)
This is a replacement 12.2x1mm header O-ring for the Traxxas 2.5 and 2.5R engines. This small O-ring goes inside the exhaust manifold to properly seal the manifold to the back of the engine.
This product was added to our catalog on September 7, 2021
Includes: Air filter body (high-volume), filter support, cap, foam filter, pre-filter, Revo air filter base (angled), wire mount, and hardware (1 each)
This product was added to our catalog on June 20, 2021
TRA5334R, Traxxas Revo Nitro Axle Carrier (2)
This is a pack of two replacement Traxxas Axle Carriers.
This product was added to our catalog on September 7, 2021
TRA5352X, Traxxas Revo Slipper Clutch Rebuild Kit
This is a replacement slipper plate and slipper clutch shoes for the Traxxas Revo and T-Maxx monster trucks.
This product was added to our catalog on May 7, 2021
TRA5383, Traxxas Revo 2 Speed Close Ratio Gear Set
This is the optional two speed close ratio gear set for the Traxxas Revo. Only Revo offers the ability to custom tailor the 2-speed gear ratios for either wide or close ratio gear shifts. The close ratio set reduces the engine’s RPM change between first and second gear for nearly seamless shifting and speed, even in the corners! Choose wide ratio gear set to allow Revo to run in first gear longer through the infield, shifting later for a big run down the straightaway.
This product was added to our catalog on May 7, 2021
TRA5385, Traxxas Revo 2-Speed Standard Ratio Gear Set (2nd speed gear 39T, 13T-17T input gears, hardware
This product was added to our catalog on September 7, 2021
TRA5387X, Traxxas ProGraphix Revo 3.3 Body
This is a Traxxas ProGraphix Revo 3.3 Body, and is intended for use with the TRA5309 Traxxas Revo 3.3 Monster Truck. This body comes 80% pre-painted with the graphics already painted on the inside, however large portions of the body are left clear so you can apply your own final color to finish the paint scheme. Included is a decal sheet for windows, grill and lights.
Note:
This body is only compatible with the 3.3 Nitro Revo. It will not fit the 2.5 Nitro Revo.
You will need to finish painting this body with your own choice of final color!
This product was added to our catalog on September 7, 2021
TRA5397, Traxxas Revo OptiDrive sensor assembly/ 2.5x6mm CS (2)
This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and determines whether the gearbox is currently in motion or not before allowing the direction to be reversed.
This product was added to our catalog on September 7, 2021
TRA5472, Traxxas Wheelie Bar Assembled (fits all 1/10th Scale Revo trucks)
Revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. The wheelie bar assembly is easy to install for controlled wheelies on demand. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it is time to head off-road, a convenient quick release tab makes removal and installation a snap. The wheelie bar mount is compatible with all factory Revo configurations including sway bars and wing mounts.
This product was added to our catalog on July 31, 2021
