71076-8, Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (Blue) w/VXL-3m ESC, TQi 2.4GHz Radio, Battery & USB-C Charger
Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck. Don’t let the smaller size fool you, this little brushless monster packs a huge punch. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, Velineon brushless power, and all-weather-ready electronics. Only Traxxas can give you the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere!
This 1/16 E-Revo VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category.
Specifically designed for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold-plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed!
Get the 1/16 E-Revo VXL to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar really high for all these years to become one of the most sought-after mini R/C cars!
CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately).
Features:
Fully Assembled and ready-to-run out of the box with included battery and charger!
Waterproof Velineon 380 brushless electronics
Traxxas Stability Management (TSM)
Rocker-actuated suspension and threaded oil-filled GTR shocks
Full-time 4WD
Ball-Bearing transmission With Torque-Control slipper clutch
Sealed silicone-filled differentials
Equipped with a 2-amp USB-C fast charger!
Dual battery compartments with quick-release doors
Up to 30+mph with included NiMH battery and 50+ mph with an additional NiMH battery (Sold-Separately)
Specifications:
Scale: 1/16
Length: 12.9" (328mm)
Width: 9.4" (239mm)
Height: 4.6" (117mm)
Wheelbase: 7.9" (202mm)
Weight: 38oz (1.09kg)
Power Source: Electric
Input Voltage:
6-12 cells (7.2V-14.4V) NiMH
2-3S (7.4V-11.1V) LiPo
Drive: Shaft-driven 4WD
Gear Pitch: 48P
Gear Ratio: 5.04:1, (Final drive: 9.72:1)
Assembly Level: Ready-To-Run
Includes:
(1) E-Revo VXL Brushless 1/16 4WD RTR Monster Truck
(1) 2-Amp USB-C Fast Charger
(1) NiMH Battery with Traxxas ID Connector
Needed to Complete:
(4) (AA) for Transmitter
This product was added to our catalog on September 27, 2023
RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue)
This is a set of RPM Front Upper & Lower A-Arms, and are intended for use with the Traxxas 1/16 E-Revo. Upon the release of the 1/16th Scale Traxxas Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With RPM's guaranteed unbreakable material and a proven A-arm design based off of their larger, 1/10th scale Revo A-arms durability for these little powerhouse trucks has finally arrived!
Another problem that has been eliminated was slop in the suspension system. In some cases, as much as 1/32” of slop is found in the stock A-arms! That problem has been solved with these new RPM versions. RPM A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result is smoother, more consistent steering and suspension movement with a significantly reduced tendency for the truck to randomly wander while driving. These arms also feature angled leading and trailing edges. RPM incorporates a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.
RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms, and are backed by RPM's industry-leading breakage warranty. If it breaks (under normal operating conditions), send it to RPM and they will replace it!
This product was added to our catalog on December 16, 2021
TRA2820X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/2200mAh)
This is the Traxxas 2S, 7.4V, 2200mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Mustang
Traxxas 1/16 Race Truck
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
Traxxas TRX-4
Traxxas TRX-4
Specifications:
Type: LiPo
Total Capacity: 2200
Voltage: 7.4
Continuous Discharge: 25C (55A)
Max Burst Rate: 50C (110A)
Watt Hours: 16.28
Max Charge Rate: 1C (2.2)
Dimensions: 88x21x30mm
Weight: 4.2oz (118g)
This product was added to our catalog on March 21, 2021
TRA7015, Traxxas Front & Rear Body Mounts w/Mount Posts
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles.
This product was added to our catalog on September 7, 2021
TRA7111, Traxxas 1/16 E-Revo Body w/Grille & Light Decals (Clear)
This is a replacement Traxxas 1/16 E-Revo Clear Body with Grill & Light Decals, and is intended for use with the Traxxas 1/16 E-Revo.
This product was added to our catalog on May 7, 2021
TRA7174A, Traxxas Pre-Mounted Talon Tires w/Gemini Wheels (Black Chrome) (2)
Tires & wheels, assembled, glued (Gemini black chrome wheels, Talon tires, foam inserts) (2)The Talon's unique tread pattern and soft compound rubber delivers excellent grip on a variety of surfaces. The Gemini chrome 2.2″ wheels provide responsive handling with a low-profile tire sidewall. Tires come pre-glued and ready to mount with matching foam inserts. Fits 12 mm wheel hubs.
This product was added to our catalog on September 7, 2021
TRA7175, Traxxas Pre-Mounted Response Pro 2.2 Tires (S1/Soft) (2)
Give your 1/16 E-Revo VXL competition style and track ready performance! Traxxas' new dish wheels and Response Pro tires are engineered for competition grade traction and superior grip in all off-road conditions. Patterned after the Revo 3.3 Platinum Edition's race-winning tire design, the new 2.2" Response Pro tires are molded in soft S1-compound for maximum grip and feature a versatile micro-block tread that offers superior handling. Foam inserts are included, and the Response Pro tires are available unmounted in pairs, or factory-mounted and glued to new 2.2 dish wheels. In addition to providing a sleek look, the dish wheels increase the E-Revo's overall width by 14mm for even greater straight-line stability and cornering agility. Standard-size 12mm hexes allow Traxxas 2.2” dish wheels to be used with many 1/10 scale buggies as well. The dish wheels accept all popular 2.2" buggy tires, including Traxxas Alias 2.2” tires.
2.2" Response Pro Tires Features:
Designed after the national championship-winning 3.8” Response Pro tires
Race-proven, S1 soft-compound rubber improves traction and cornering grip
Performance-tuned foam inserts included
2.2" Dish Wheel features:
Standard-size 12mm hex
Fits Traxxas Bandit when used with #1654 hex adapter
Lightweight, aerodynamic design
7mm wider offset than stock 1/16 E-Revo wheels for enhanced off-road stability
Accept standard buggy rear 2.2" tires
This product was added to our catalog on May 3, 2021
TRA7184, Traxxas 1/16 E-Revo Wheelie Bar
This is the optional Traxxas 1/16 E-Revo Wheelie Bar. How do you like your wheelies? Whether you like to ride with the front wheels held high for show-stopping stunt maneuvers or prefer to keep ‘em low for locked-in launches, Traxxas’ new adjustable wheelie bar for the 1/16 E-Revo puts you in control. The wheelie bar’s unique, patented design is easy to install for controlled wheelies on demand. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it’s time to head off road, the wheelie bar can be easily removed with just two screws.
Features:
Factory Assembled
Installs easily in minutes
Rugged construction, patented design
Four snap-in positions for variable wheelie angles
Easily removed for off-road running
Replaceable wheels
Includes installation hardware and instructions
This product was added to our catalog on May 12, 2021
