INTC23301, Hex Tip Metric Set, 1/4" Adapter (1.5, 2.0, 2.5, 3.0mm)
Set includes 1.5mm Hex Driver, 2.0mm Hex Driver, 2.5mm Hex Driver, 3.0mm Hex Driver
This set includes:
1.5mm
2.0mm
2.5mm
3.0mm
This product was added to our catalog on July 30, 2021
The JConcepts Tire Balancer features an aluminum and steel design that blends nicely into any pit area. The balancer comes set in a storage box for protection and travel convenience. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition.
The center point of any balancer are the bearings, the free spinning action rests inside the JConcepts hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminum material, anodized, etched with instructions and chamfered for that extra lustrous look.
The base of the item is built to protect, position and maintain a small footprint at all times. The base has 4 stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The JConcepts balancer is pre-assembled and backed by JConcepts customer support and racing team lineage.
NOTE: The JConcepts Racing Team uses a modeling clay for balancing material which is readily available through hobby based retailers.
Features:
JConcepts design, function
Aluminum and steel construction
Collapsible, lay-down design
Center hub assembly with bearings
Compatible with 1/10th and 1/8th vehicles
Sturdy base with stand-off legs
Black anodizing, etched instructions
Thumb nut and screw assembly and use
Pre-assembled
Includes storage box with foam padding
This product was added to our catalog on December 16, 2021
JCO2889, Analog Quick Reference Calipers
JConcepts Analog Quick Reference Calipers allow users to reference dimensions quickly. Racers have asked over and over for a small footprint item that is able to measure small spaces accurately and quickly. The quick reference calipers are analog based and capable to be locked into place to secure or save dimensions for later or to copy side-to-side. The all-aluminum built and anodized item, built from 4 pieces, is a very technical and precise piece.
The quick reference tool has the ability to measure inside surfaces and outside surfaces depending on which end is chosen for use. A metric graduated scale is laser etched onto the item to allow the user to measure in .5mm increments. A thumbscrew allows the sliding plane to be locked into place for quick comparisons and reference distances. A display window is machined into the upper slide where dimensions are shown up to an overall length of 80mm. A small overall size makes it ideal to place in to RC sized tool and lock boxes used routinely out in the field.
Features:
JConcepts design and function
Highly detailed design, 4-piece construction
Graduated scale measuring in .5mm increments to 80mm
Lockable sliding plane to save reference dimensions
This product was added to our catalog on May 22, 2021
JCO5014, JConcepts Masking Tape (24mmx18m)
JConcepts Masking Tape. This premium masking tape offers a great solution for any hobbyist looking to perform simple paint schemes with multiple colors with crisp lines and color separation. Available in multiple sizes the narrower, 12mm x 50m length roll is great for performing detail work, slight curvature to mockup a design to the inside of a body shell of choice. The wider, 24mm x 18m roll is good for masking off larger areas or to quickly cover more space. Package includes one roll of tape.
This product was added to our catalog on January 19, 2023
JCO5015, JConcepts Masking Tape (12mmx50m)
JConcepts Masking Tape. This premium masking tape offers a great solution for any hobbyist looking to perform simple paint schemes with multiple colors with crisp lines and color separation. Available in multiple sizes the narrower, 12mm x 50m length roll is great for performing detail work, slight curvature to mockup a design to the inside of a body shell of choice. The wider, 24mm x 18m roll is good for masking off larger areas or to quickly cover more space. Package includes one roll of tape.
This product was added to our catalog on January 19, 2023
KYOMZW121, Kyosho MINI-Z Bag
This is a Kyosho MINI-Z Bag, a great addition to your storage needs. This small bag is ideal for transporting or storing your Mini-Z Ready set, tools and spare parts. The incorporated padded dividers, pockets and rubber bands all help to keep tools and components securely in place. The outside of the bag is embroidered with the "Kyosho Mini-Z" logo to rep the brand in quality fashion.
Specifications:
Dimensions: 280x200x75mm
This product was added to our catalog on September 9, 2024
Micro-Bending Pliers (575)
Unique forming blades shape wire and light gauge strips of brass and aluminum. Ideal for adjusting trip pins on N, HO and O sized couplers.
Ergonomically designed and featuring Xuron's Light-Touch™ return spring and non-slip Xuro-Rubber™ handle grips for comfort and control.
Features
10 piece Carving Knives
Overview
Key Features
10 piece Carving Knives
Overview
10 piece selection of fine carving knives, perfect for almost any carving project.
Specifications
Tool Type
Knives & Blades
MID5241, Midwest Plywood 1/32 x 12 x 24"
Features:
Aircraft Grade Birch Wood
.8mm thickness
3-ply construction
This product was added to our catalog on September 26, 2021
Overview
Birch Hardwood Dowels are ideal for any hobby, craft or educational woodworking project.
Specifications
Dimensions
Length - 36"
Material
Birch
Shape
Dowel - Round
Birch Hardwood Dowels are ideal for any hobby, craft or educational woodworking project.
Specifications
Dimensions
Length - 36"
Material
Birch
Shape
Dowel - Round
• Basswood is perfect for almost any project that requires wood, and can be painted or stained to represent any wood type
• Bag contains 72 cubic inches (1/2 board foot) of various sizes and shapes
A variety of popular hardwoods - Basswood, Maple, Walnut, Mahogany or Cherry - for hobby, craft and miniature projects. Wood types will vary. Contains 72 cubic inches (1/2 board foot) of random shapes and sizes per bag.
PHBPHT004, Power Hobby Kyosho Mini-Z Magentized Mini Tools Driver Set
Powerhobby Kyosho Mini-Z Magentized Mini-Z Tools Driver Set
This product was added to our catalog on September 9, 2024
2175ET-Professional Sprue Cutter
Designed for scale modelers by a scale modeler!Longer, low profile cutting jaws easily reach into tight, confined spaces while the Micro-Shear® blade by-pass cutting action leaves smooth, clean cuts without pinching or damaging the delicate part.A "must have" tool for every master modeler.Recommended for use on soft plastic only
PTK-8000, ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes)
This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap.
The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools.
Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached!
In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag.
Specifications:
Overall Bag Dimensions (WxHxD): 21.65x23.22x13.77"
Large Drawer Dimensions (WxHxD): 19.5x7.5x12.5"
Medium Drawer Dimensions (WxHxD): 9.5x4.5x12.5"
Small Drawer Dimensions (WxHxD): 8.5x4.5x12.5"
*Dimensions may vary slightly due to manufacturers tolerances.
This product was added to our catalog on December 16, 2022
PTK-8153, ProTek RC 5x9.75" Magnetic Screw Catcher
The ProTek RC 5x9.75" Magnetic Screw Catcher is an accessory every RC enthusiast can benefit from. Magnetic hardware containers are a great way to organize hardware when building a new kit, or during routine maintenance. They are an invaluable accessory when sorting different screws by type and size, and will help prevent screws from rolling off your bench. Plus, they add a bit of magnetism to the screws making them easier to work with. But a magnetic bowl or tray style container takes up excess room in your tool box and they don't always allow you to keep your hardware sorted during the build. So we collaborated with Cow RC to create this magnetic screw catcher that is easy to pack, easy to haul, and useful for every RC discipline.
This product was added to our catalog on November 23, 2021
PTK-8243, ProTek RC "TruTorque" Metric 1/4" Power Drill Tip Set (4) (1.5, 2.0, 2.5, 3.0mm)
This is a ProTek R/C "TruTorque" Metric Power Tool Tip Set, with 1.5, 2.0, 2.5 and 3.0mm tips. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier.
Anyone who has used a cordless drill to wrench on their rig knows that when used properly, power tools can provide an incredible advantage. They not only allow you to replace damaged parts faster, but also help to prevent hand fatigue. ProTek R/C "TruTorque" Power Tool Tips are machined from high quality HSS steel for durability and long life. The precision cut tips provide an exceptional fit with the fastener. The 1/4" drive hex ends are designed to fit tools that accept a 1/4" drive hex socket.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
Features:
Quality tool steel tips
Standard 1/4" drive for compatibility with common power tools
Size is marked on the tip for identification
Specifications:
Total Length: 85mm
Tip Length: 54mm
Material: HSS Steel
Includes:
(1) 1.5mm 1/4" Drive Power Tool Tip
(1) 2.0mm 1/4" Drive Power Tool Tip
(1) 2.5mm 1/4" Drive Power Tool Tip
(1) 3.0mm 1/4" Drive Power Tool Tip
This product was added to our catalog on December 16, 2021
PTK-8282, ProTek RC "TruTorque SL" 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm)
This is the ProTek R/C "TruTorque SL" Metric Nut Driver Set. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier.
ProTek R/C "TruTorque SL" nut drivers feature updated, "super light" 20mm diameter machined aluminum handles that have been knurled to provide a high leverage, non slip surface that will be comfortable to use during long wrenching sessions. The tool size is etched into the handle for easy identification and a black rubber cap is fitted to the end to increase comfort during use. The precision cut tool steel tips provide an exceptional fit with the fastener, and feature a bronze colored finish that not only looks good, but also helps to protect the steel from corrosion.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
Features:
Updated SL super light CNC machined knurled aluminum handles
Size is marked on the handle for identification
4-Piece nut driver set
Rubber end caps
Includes:
(1) 5.0mm Metric Nut Driver
(1) 5.5mm Metric Nut Driver
(1) 7.0mm Metric Nut Driver
(1) 8.0mm Metric Nut Driver
This product was added to our catalog on December 16, 2021
PTK-8416, ProTek RC "TruTorque SL" Metric Hex Driver Set (4) (1.5mm, 2.0mm, 2.5mm, 3.0mm)
Features:
CNC machined knurled aluminum handle with relief holes
Rotating aluminum end cap
Durable, precision cut, 80mm long HSS Steel tip
Tip size is etched in three places on the handle for easy identification
Includes:
(1) 1.5mm Hex Driver
(1) 2.0mm Hex Driver
(1) 2.5mm Hex Driver
(1) 3.0mm Hex Driver
This product was added to our catalog on December 16, 2021
PTK-8485, ProTek RC Exactness High Grip Hobby Knife (#11 Blade)
The ProTek RC Exactness High Grip Hobby Knife is a great option for cutting or trimming plastic, polycarbonate, rubber, paper and wood. The soft handle has a hex nut on the adjusting end to keep the handle from rolling away but still allowing for a comfortable round handle. Using number 11 blades, this hobby knife also features a blade cover for safe storage and transport. Package includes one hobby knife and one blade.
Features:
Sharp, Long lasting #11 blade
Soft, no slip handle
Non-roll design
Replacement blades available (PTK-8487)
This product was added to our catalog on September 30, 2022
PTK-8486, ProTek RC Sprue Side Cutter
The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting control. Package includes one sprue cutter.
Features:
Precision cut blades with tapered edge
Made from hardened stainless steel
Comfortable soft grips
Perfect for cutting parts and trimming tires
This product was added to our catalog on September 30, 2022
PTK-8487, ProTek RC Replacement #11 Hobby Knife Blades (10pcs)
ProTek RC Replacement #11 Hobby Knife Blades. These replacement blades are intended for the ProTek RC Hobby Knife (PTK-8485), or for any hobby knife requiring a #11 blade. Package includes ten blades.
This product was added to our catalog on September 30, 2022
