If you are looking for the next quality ultra-light 5" frame, look no further than the Tony 5!
Check out what FlyFishRC has to say about their frame!
FlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!In this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.Our objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!Tony is a straightforward and easy-to-build platform, fully O3-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).We highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.For instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.However, if your intention is to use this frame with the DJI O3 system, the all-up weight of such a setup will increase to around 260g, as the O3 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O3 to shave off some of the excess weight.Overall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online; we'd love to hear about your experience!Anyway...- WHAT’S YOUR NAME?!- TONYYYYY!
Check out our other 5" frames as well as the rest of our FlyFishRC products selection!
Features
Only 57g (w/TPU)
Sub250g capable
High structural strength
High-end T700 carbon fiber
CNC aluminum camera plates
Silicone shock-absorbers for O3 AU
Compatible with both 19/20mm cameras
Compatible with most VTX
Compact body, well suited for freestyle
Equipped with all accessories needed for analog and HD builds
12.9-grade strength hardware with Loctite threadlocker pre-applied
Specifications
Model: Tony 5
Geometry: True-X
Wheelbase:215mm
Arm thickness: 4mm
Top plate thickness: 2mm
Middle plate thickness: 2mm
Bottom plate thickness: 2mm
Propeller size: 5inch
CNC plate thickness: 4mm
FPV cam spacing: 19mm/20mm
Weight: 57g(with TPU parts)
Total Dimensions:133.7mmx168x29mm
Stack mounting holes: 20mmx20mm/25.5mmx25.5.5mm(M3)
VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2)
Includes
1x FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250
Two replacement arms for the Tony 5 Sub250 FPV Freestyle Frame!
Check out our other 5" frames, as well as the rest of our FlyFishRC products selection!
Includes
1x FlyFishRC Tony 5 5" Replacement Arms (2pc)
This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 & Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure flight. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! This long range quad is a small efficient cruiser with a deadcat design eliminating props in your view, perfect for the elite capabilities of the Walksnail system.
Be sure to check out our Bind-n-Fly collection and our Walksnail Compatible Quads and Electronics as well as other great products from Flywoo!
Features
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation
Support 1080P 120fps Recording
Latency Average Delay 22ms
Walksnail Avatar V2 Kit 8G ( Camera & VTX)
Walksnail WS-M181 GPS: Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.
Specification
Model: Explorer LR 4 HD Walksnail Sub250 Micro Long Range
Brand: FLYWOO
Frame: Explorer LR 4 HD Walksnail Frame kit
FC and ESC: Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC )
VTX & Cam: Walksnail Avatar HD Kit V2 (8G)
Propeller: Gemfan Hurricane 4024 2
Antenna: Flywoo Circular Polarized 5.8GHz UFL Antenna - LHCP
Motor: NIN 1404 V2 ULTRALIGHT FPV MOTOR
Weight: 168.4g
Flight Controller Specifications
MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
ESC Specifications
Con. Current: 40A
Burst Current: 45A
Input Voltage: 2-6S
Support: DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42x42x4mm
Mounting Hole: 20x20mm ( M3)
Motor Specifications
Kv: 2750Kv
Input Voltage: 4-6S
Stator diameter: 14mm
Stator height: 4mm
Bearings: NSK
Wire Length: 24AWG 150mm
Shaft size: 1.5mm
Mounting Screw Pattern: 12x12 mm
Weight: 8.7g
VTX Specifications
Communication Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm; 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 8G
Recording: 1080p/720p
Weight: 17.6g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD: Canvas mode
Latency Average delay: 22ms
Antenna Connector: U.FL
Camera Specifications
Model Avatar: V2 camera
Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 7.2g
Dimensions: 19x19x22mm
Coaxial Cable: 140mm
Prop Specifications
Diameter: 4"
Pitch: 2.4"
Blades: 2
Material: Polycarbonate
Disk Diameter: 102.33mm
Max Prop Width: 13.38mm
Hub Thickness: 5.5mm
Shaft Hole: 1.5mm
Weight: 1.61g
Antenna Specifications
Gain: 2.2dBi
Axial ratio: 1.0 Around
Band Width: 5.6Ghz – 6.2GHz
Axial Ratio: Around 1.0
Polarization: LHCP
Connector: UFL
Weight: 1.6g
Include
1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - Choose Your Receiver
1x Hardware Kit
8x Gemfan 4024-Bi Blade Balck
2x Battery strap 15x180mm
1x Set of screws
Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
Come see our Cinewhoop Collection and other great products from Flywoo!
We also carry a version with the O3 Air Unit already installed here.
Features
Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Innovative duct design
Sub250 (even with battery)
Specifications
Input Voltage: 4S
Model: CineRace20 HD DJI O3 2inch (without Air Unit)
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv
Propeller: D51-5 51mm
Buzzer : 5PCS Active Alarm Buzzer
GPS: GOKU GM10 Nano V3 GPS
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)
Recommended Battery:Explorer 450mah 4S ( flight time 5mins ) Explorer 750mah 4S ( flight time 6mins )
GOKU GN F405S 20A AIO
Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA
IMU: ICM42688
OSD: BetaFlight OSD
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)
Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
FPV System
Add your own O3 Air Unit
Includes
1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP
8 x D51-5 props
2 x Battery strap 9x150mm \ 9x200mm
1 x Set of screws
1 x 90° USB Type-C
Sub250's M2 1002 brushless motor is specially designed for 1.6-2 inch FPV Drones, with strong power, small size and lightweight design. It uses imported N52H magnetic steel and high-temperature resistant coil, ball bearings, and a three-blade rotor for good structural rigidity and heat dissipation.
Check out the rest of our pre-built quads, as well as the rest of our Sub250 selection!
Features
Small in size and lightweight, only 2.6g.
N52H strong magnetic magnet, high-temperature resistant coil, full of power.
Using imported ball bearings, the motor has high efficiency and long service life.
Low loss stator, low heat generation, and high efficiency.
With fine motor dynamic balance adjustment, the motor runs smoothly and stably.
Suitable for 1.6 -2 inch mini FPV drones.
The 1.5mm shaft diameter is suitable for most propellers on the market.
Specifications
Brand Name: Sub250
Product: M2 1002 Brushless Motor
KV value: 14000
Working voltage: 4.35V (1S)
Configuration: 9N12P
Stator diameter: 10mm
Stator height: 2mm
Outlet diameter: Φ1.5mm
Dimensions: Φ13.83mm x 7.75mm
Magnet: N52H
Weight: 2.6g (5cm wire)
Applicable model: 1.6- 2-inch FPV drones
Recommended battery: 1S 380mAh-530mAh LiPo
Includes
1x Sub250 1002 14000Kv Micro Motor - Black/Blue (1.5mm Shaft)
4x M1.4 x 3mm screw
Sub250's M2 1002 brushless motor is specially designed for 1.6-2 inch FPV Drones, with strong power, small size and lightweight design. It uses imported N52H magnetic steel and high-temperature resistant coil, ball bearings, and a three-blade rotor for good structural rigidity and heat dissipation.
Check out our vast motor selection as well as the rest of our Sub250 selection!
Features
Small in size and lightweight, only 2.6g.
N52H strong magnetic magnet, high-temperature resistant coil, full of power.
Using imported ball bearings, the motor has high efficiency and long service life.
Low loss stator, low heat generation, and high efficiency.
With fine motor dynamic balance adjustment, the motor runs smoothly and stably.
Suitable for 1.6 -2 inch mini FPV drones.
The 1.5mm shaft diameter is suitable for most propellers on the market.
Specifications
Brand Name: Sub250
Product: M2 1002 Brushless Motor
KV value: 21000
Working voltage: 4.35V (1S)
Configuration: 9N12P
Stator diameter: 10mm
Stator height: 2mm
Outlet diameter: Φ1.5mm
Dimensions: Φ13.83mm x 7.75mm
Magnet: N52H
Weight: 2.6g (5cm wire)
Applicable model: 1.6- 2-inch FPV drones
Recommended battery: 1S 380mAh-530mAh LiPo
Includes
1x Sub250 1002 21000Kv Micro Motor - Black/Silver (1.5mm Shaft)
4x M1.4 x 3mm screw
Upgrade your drone experience with the Sub250 1404 4500Kv Micro Motor. This powerful 4500KV motor is designed for 2.5-inch and 3-inch drones, offering plenty of thrust and low current draw. Plus, its special hollowed-out design allows for better heat dissipation, so you can enjoy its superior performance and longer life.
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications
Brand Name: Sub250
Model: 1404 Motor
KV value: 4500
Configuration: 9N12P
Magnet: N52H
Stator diameter: 14 mm
Stator height: 4 mm
Outlet diameter: Φ1.5mm
Maximum power: 264.6W
Rated voltage: 16V
Maximum current: 16.93A
Mounting hole: 9mmx9mm
Recommended ESC: 20A/30A
Weight: 10.3g
Applicable model: 2.5 - 3 inches FPV drones
Includes
1x Sub250 1404 4500Kv Micro Motor
4x M2x7 Screws
All batteries must be shipped by a ground shipping method.
Sub250 1S 380mAh 3.8V LiHV High-voltage lithium battery is specially designed for Indoor Micro FPV drones. It is small volume, lightweight, and High capacity. It can discharge up to 90C, providing sufficient power for flight. Sub250 LiHV 1S battery’s USB charging board is used for charging, It’s extremely convenient and High-efficiency!The full charge voltage of the battery is 4.35V, the battery needs to be charged in time when the flight voltage drops to 3.6V!
Specifications
Weight: 9.7g
Capacity: 380mAh
Dimensions: 48x17x6.5mm
Max cont. discharge (C-rate/current): 90C
Charge Connector: GNB27
Includes
6x 3.8V 1S 380mAh 90C LiHV Batteries for Nanofly16
Warnings From Manufacturer:
Please read the battery parameters and instructions in detail before use.
Please don’t charge the battery unattended.
Do not overcharge (select the correct battery type before charging, the full charge voltage of a single cell of LiPo battery is not more than 4.2V, and the full charge voltage of a single cell of LiHV battery is not more than 4.35v).
Do not over-discharge (the single-cell discharge voltage of LIPO and LiHV batteries cannot be lower than 3.5V, over-discharging will damage the battery and cause swelling).
Don’t place the battery close to open flames or fire sources.Keep the battery away from flammable materials when chargingPlease carefully check the battery voltage and capacity before charging and useIt is forbidden to reverse the positive and negative poles of the battery (to avoid short circuit)
Do not directly touch the leaking battery. If you accidentally touch the electrolyte, please wash it with clean water immediately. If it is serious, please consult a doctor immediately.
Please dispose of the ruptured battery in time and do not reuse it
If you need to store the battery for a long time, please maintain the battery voltage at a single-cell 3.80V-3.85V. Please ensure that a charge-discharge activation is performed within 3 months to maintain the stability of the battery.
It is forbidden to disassemble and reassemble the battery or change the wiring (it is easy to cause short circuits and burning).
If a collision occurs during use, please remove the battery. Check carefully whether the battery and connector are normal.
Manufactured with high-strength PC material, the Gemfan Pro 40mm 8 pack provides excellent rigidity and durability for all your racing needs. These props are designed to be lightweight rated with 0.3 grams. These props from Sub250 are meant as replacement props for Whoopfly16.
Check out the rest of our Micro Props, as well as the rest of our Sub250 selection!
Specifications
Weight: 0.3g
Propeller Diameter : 40mm
Shaft: 1.5 mm
Blades: 3
Material: Poly Carbonate
Color: Teal
Includes
1x Sub250 Gemfan Pros Tri-Blade 40mm Micro/Whoop Prop 8 Pack(1.5mm) - Teal
Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the Prop intended for this frame with matching color!!
Check out all our Micro Props, as well as the rest of our Sub250 selection!
Specifications
Weight: 0.24g
Propeller Diameter : 40mm
Shaft: 1.5mm
Pitch: 1 inch
Blades: 2
Material: Poly Carbonate
Hub Diameter:5mm
Hub Thickness: 5mm
Color: Aquamarine
Includes
2 x CW HQ 40mm Micro Whoop Props
2 x CCW HQ 40mm Micro Whoop Props
Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the Prop intended for this frame with matching color!!
Check out the rest of our pre-built quads, as well as the rest of our Sub250 selection!
Specifications
Weight : 0.24g
Propeller Diameter : 40mm
Shaft: 1mm
Pitch: 1 inch
Blades: 2
Material: Poly Carbonate
Hub Diameter:5mm
Hub Thickness: 5mm
Color: Aquamarine
Includes
2 x CW HQ 40mm Micro Whoop Props
2 x CCW HQ 40mm Micro Whoop Props
Introducing the HQ 1.5mm shaft 51mm 3 propellers for the Sub250 NanoFly20! These propellers are specially designed to enhance the performance of your NanoFly20. With a 1.5mm shaft and 51mm diameter, these propellers provide maximum thrust and efficiency for a smooth and stable flight. Upgrade your NanoFly20 with these high-quality propellers and experience the difference for yourself.
Specifications
Weight: 1.8g
Propeller Diameter: 51mm
Shaft: 1.5 mm
Pitch: 1 inch
Blades: 3
Material: Poly Carbonate
Color: Aquamarine
Includes
2x CW HQ 51mm-3 Micro Whoop Props
2x CCW HQ 51mm-3 Micro Whoop Props
Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications
Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P
Shaft Diameter: 1.5mm
Weight (Incl. Cable): 2.2g
Mounting Pattern: 6x6mm TRI
Includes
1x Sub250 M1 0803 19000Kv Micro/Whoop Motor
Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications
Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P
Shaft Diameter: 1.5mm
Weight (Incl. Cable): 2.2g
Mounting Pattern: 6x6mm TRI
Includes
4x Sub250 M1 0803 19000Kv Micro/Whoop Motor
Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames! Featuring a true X layout and prints included, the Sub250 Nanofly16 is a go-to outdoor whoop frame!Check out the rest of our pre-built quads and the rest of our Sub250 selection!
Specifications
Brand Name: Sub250
Model: NF16
Wheelbase size: 77mm
Bottom plate thickness: 1.5mm
Camera plate thickness: 1.0mm
FC mounting holes: 25.5mm x 25.5mm
Motor mounting holes: 3-M1.4-EQS-Ø6.6
Propeller size: 40mm
Size:65mm x 65mm x 41mm
Weight: 8.3g (including 3D print)
Includes
1 x 1.5mm bottom plate
1 x 3D printed top cover
1 x 3D printed battery holder
16 x M1.4 x 3 round head Phillips screws
1 x M2 x 6mm round head screw
3 x M2 x 12 round head screws
1 x M2 x 14 round head screw
4 x M2 x 6.6 shock absorbers
8 x M2 x 2 nylon nuts
1 x 1.5mm L-shaped screwdriver
1 x Phillips screwdriver
The long-awaited second member of the Nanofly family "Nanofly20!" is released! "Change your flying habits in small spaces". The Nanofly20 is equipped with a two-inch propeller, and the motor mounting hole is 3-M1.4-Ø6.6, which can easily install most of the 1002 motors and 1102 motors on the market. Its overall lightweight design achieves a light feel, "as light as a swallow". The 25.5 flight controller holes can be installed with mainstream flight controllers on the market. Install a highly integrated sub 1s 5A flight controller, so that it can take off with only one flight controller board plus a camera and motor. It can also be used with Walksnail Avatar VTX and HDZero VTX.
Features
"Light as a swallow" lightweight design, with an overall weight of 8.4g, giving more installation space for your electronic equipment.
Carbon fiber bottom plate design, body strength pro beyond.
25.5mm flight controller installation holes allow for easy installation of the market's most popular AIO flight controllers.
Ø6.6 M1.4-3 motor mounting holes, compatible with most motors such as 0803, 1002, and 1102.
Match a variety of VTX solutions to build your own HD FPV mini drone.
Specifications
Item: Nanofly20 frame
Wheelbase: 88mm
Arm plate: 1.5mm
Motor holes: 3-M1.4-EQS-Ø6.6
FC mounting holes: 25.5x25.5
Camera installation space: 14x14 (mm)
Weight: 8.4g
Includes
1x Nanofly20 Frame 1x Battery cabin4x M2x18 Round head screw4x M2x12 Round head screw2x M2x3 Round head screw2x M1.4x3 Round head cross screw
The Sub250 Whoopfly16 BNF is an ultra-light analog 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR).. The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our Analog BNF quads as well as the rest of our Sub250 selection!
Features
Inverted whoop FPV drone makes the paddle and motor more efficient.
With the new 1S 530mah LiHV battery
Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power "always ready to overtake"
Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice
Specification
Analog Version
Product name: Whoopfly16
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: VTX 5.8G 200mW
Lens: Caddx Ant eco
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
weight: 37.7g
Receiver: ELRS (SPI)
Includes
1x Sub250 Whoopfly16 BNF 1.6" Analog Ultra-Light 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws
1x Blue frame protection cotton
1x Red frame protective cotton
1x L-shaped inner hexagon screw blade
1x Cross screw blade
2x 3M double-sided tape
4x 1608-3 propellers
The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our HDzero BNF quads as well as the rest of our Sub250 selection!
Features
Inverted whoop FPV drone makes the paddle and motor more efficient.
With the new 1S 530mah LiHV battery
Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power "always ready to overtake"
Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice
Specification
HD Zero Version
Product name: Whoopfly16
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: Hd Zero whoop lite
Lens: Hd Zero nano lite camera
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
weight: 39.2g
Receiver: ELRS (SPI)
Includes
1x Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws
1x Blue frame protection cotton
1x Red frame protective cotton
1x L-shaped inner hexagon screw blade
1x Cross screw blade
2x 3M double-sided tape
4x 1608-3 propellers
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The Dark Breeze Edition looks great and is the perfect choice for relaxed FPV flying. This PNP version is glue-free and portable, with detachable wings and a tail boom. With its stylish "stealthy" look, it's easy to hand launch. This new stealthy Dark Breeze Edition is a great addition to your FPV lineup! When the ZOHD Drift was planned, there were some very specific goals in mind, but the most important one was to make it easy to fly. It allows anyone to start flying right out of the gate, even beginners. The Drift is ultra-light and very durable, so it will survive "not-so-perfect" landings. The PNP package includes the ZOHD DRIFT plane PNP with pre-installed motor, ESC, servos, propeller, and hardware. There is a hole in the nose for your FPV camera, and there is also space in the belly for a receiver and other electronics.
Check out all our PNP wings, Kit wings, and all our ZOHD products!
Features
Sub 250g!
Being lightweight will be safe to fly anywhere, anytime. You’re avoiding the hassle of an FPV registration.
Dedicated equipment bay for FPV Camera, Flight Controller (ZOHD Kopilot Lite), and GPS.
Detachable main wing and tail boom, glue-free assembly, portable for outdoor flying.
Built-in CF rods in the ailerons will give precision and sharp action to your inputs.
A specially designed H-girder for the main wing makes it super solid and tough.
The optimized air-cooling design will keep your gear safe from overheating.
Durable EPP material, built-in CF spar for enhancement, crash resistant.
The nose camera bay is compatible with all FPV and AIO cameras.
Super easy to hand launch and slow fly, agile and accurate in control.
Built-in CF strip inside the fuselage for extra enhancement.
New Dark Breeze Edition with “stealth” appearance.
Large battery bay for extended flight time.
Specifications
Item Name: DRIFT(Dark Breeze Edition)
Wingspan: 877mm (34.52'')
Material: HighQuality EPP
Length: 688mm (27.08'')
Brand Name: ZOHD
Version: PNP
2S CONFIGURATION
Motor: 1406-2600KV
ESC: 30A w/5V 2A BEC
Servos: 4.3gx2, 8gx1
Propeller: 2 blade 5x5
Recommended Battery: Lipo 2S 900-1500mAh or ZOHD Lionpack18650 2S1P 3500mAh
ForSub250g Configuration：PNP+Lipo 2S 900mAh battery+Kopilot Lite+VC400 Camera
3S CONFIGURATION
Motor: 1406-2600KV
ESC: 30A w/5V 2A BEC
Servos: 4.3gx2, 8gx1
Propeller: 3 blade3x5x3
Recommended Battery: Lipo 3S 800-1100mAh
For Sub250g Configuration：PNP+Lipo 3S 800mAh battery+Kopilot Lite+VC400 Camera
Includes
1x ZOHD PNP Drift FPV Plane - Dark Breeze Edition
