ARA311076, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (14T)
This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision CNC machined
Wide tooth profile for smooth operation
Suits 1/8" (3.175mm) motor shaft diameter
Laser etched with tooth count for easy identification
Precision manufactured threaded set-screw hole
4x4mm set screw included
Includes:
(1) 0.8 Mod Pinion Gear
(1) Set Screw (4x4mm)
ARA311077, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (15T)
This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck.
This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision CNC machined
Wide tooth profile for smooth operation
Suits 1/8" (3.175mm) motor shaft diameter
Laser etched with tooth count for easy identification
Precision manufactured threaded set-screw hole
4x4mm set screw included
Includes:
(1) 0.8 Mod Pinion Gear
(1) Set Screw (4x4mm)
This product was added to our catalog on August 5, 2022
ARA311078, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (16T)
This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision CNC machined
Wide tooth profile for smooth operation
Suits 1/8" (3.175mm) motor shaft diameter
Laser etched with tooth count for easy identification
Precision manufactured threaded set-screw hole
4x4mm set screw included
Includes:
(1) 0.8 Mod Pinion Gear
(1) Set Screw (4x4mm)
RPM70562, RPM Traxxas X-Maxx Castle Mamba Monster X8S ESC Cage (Black)
This ESC Cage, designed to protect and secure the ESC body only, leaving the fan free for easy removal for wet running. RPM left the front, rear and sides of the ESC open to allow critical air movement, keeping your machine cool and in running order. An encased on/off switch mount and antenna relocation plate are also included for further optimization.
While most mounts require double-sided tape for installation, this set-up ESC Cage for the Traxxas X-Maxx provides a solid, positive mount, locking your valuable ESC in place. Dual clamp plates prevent a massive slam from ejecting the ESC.
Tech Notes: The RPM ESC Cage for the Mamba X 8S ESC works with Castle ESCs from the following Castle part numbers:
CSE010-0165-00
CSE010-0165-01
This ESC Cage is guaranteed to fit the Traxxas X-Maxx running the stock TRA7724 Traxxas Receiver Box Lid and TRA7714 Chassis Support Braces only.
Features:
Provides a solid, positive mount to keep your valuable ESC in place
Allows the ESC to be run with or without a fan.
Air channels along the sides of the ESC allow air movement and help keep the ESC cool.
Includes a separate, encased on/off switch mount and antenna relocation plate.
This product was added to our catalog on April 16, 2021
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
RPM70662, RPM Wide Front A-Arms (2) (Black) Traxxas Rustler Stampede
This is a pair of optional RPM Wide Front A-Arms. Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM wide front A-arms will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. These Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “NOTE:” below) and bolt on a set of rear wheels! It couldn’t be easier. Available in black, blue or green.You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from RPM's trademark blend of nearly indestructible nylons and backed by their world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong!
NOTE: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here:
Rustler XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Stampede XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA2338 (96mm long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Rustler VXL: 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Stampede VXL: 1 – Traxxas TRA5138 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
This product was added to our catalog on April 9, 2015
This product was added to our catalog on December 16, 2021
RPM70945, RPM Traxxas #3355R VXL-3S ESC Cage Protector (Blue)
This is an optional RPM Blue Plastic ESC Cage Protector for use with the Traxxas VXL-3S Brushless ESC (TRA3355R).
Since the VXL-3S mounting tabs have been reported to us as weak, RPM has created this cage that provides a much less expensive solution to protection the ESC. Why risk potential damage to your expensive speed control when the RPM option is an inexpensive piece of insurance that will prevent those tabs from ever being a problem.
The RPM solution is a simple, yet strong and effective one: They eliminated the use of the two mounting tabs on the ESC in favor of a complete cage system that solidly locks the ESC in place using RPM indestructible nylons. The ESC Cage is the most effective, durable and best protection for your speed control possible. By completely surrounding and capturing the VXL-3S ESC, damage from broken tabs and ejection from the vehicle has been completely eliminated.
The RPM VXL-3S ESC Cage works perfectly even if one or both mounting tabs on the ESC have already been broken or cut off!
Each RPM ESC Cage is made from our incredibly strong, ultra lightweight blend of engineering grade nylons and factory-backed by our industry-leading limited lifetime manufacturer warranty. RPM molded products are made with pride in the USA!
Features:
Fits the Traxxas #3355R VXL-3S ESC only
Does not work with Traxxas #3355X ESC (see RPM70605)
Available in Black (RPM70942) or Blue
Protects your expensive ESC
Tech Notes: RPM VXL-3S ESC Cages are designed for the Traxxas VXL-3S ESC (Traxxas #3355R) only. While this ESC Cage will fit a variety of applications, they have been tested and only guaranteed to fit the following vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 2wd & Rally. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate (stock item on VXL models) is used – Rustler, Stampede 2wd & Bandit.
This product was added to our catalog on April 16, 2021
RPM72062, Front A-arms for the Associated Rival MT10 (2)
RPM72062, RPM Associated Rival MT10 Front A-Arm Set
This product was added to our catalog on December 16, 2021
RPM73282, Rear Heavy Duty A-Arms, Black: Bandit
Accessory part for these models:
Traxxas Bandit®
This product was added to our catalog on September 7, 2021
RPM73752, Front Bulkhead, Black: TRA 2WD
Product Details
Key Features
Fits Traxxas 2-Wheel drive 1/10 vehicles
Made from RPM's trademarked blend of incredibly strong nylons
RPM's industry-leading limited lifetime breakage warranty
Available in different colors
COMPATIBILITY
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Overview
One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.
Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles.
* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
Product Specifications
Material
Nylon
Scale
1/10
RPM73754, RPM Traxxas 2WD Front Bulkhead (Green)
The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
RPM also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. The RPM version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. RPM also included a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from RPM's bulletproof blend of engineering grade nylons, made right here in the USA and comes with their limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Fits:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
NOTE:
RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas TRA2530 & TRA2530A.
This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It is not compatible with the 4×4 versions of any of these vehicles.
Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
This product was added to our catalog on July 11, 2021
RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede)
RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again!
NOTE: 5x11x4mm bearings are not included. 4 bearings are required.
Features:
Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
This product was added to our catalog on October 13, 2021
RPM80375, Front Bearing Carrier, Blue: TRA 2WD
Product Details
Key Features
Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
Overview
Traxxas Bandit
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again!
Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).
Product Specifications
Material
Plastic
Refinement Color
Blue
This product was added to our catalog on December 16, 2021
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
Product Details
Key Features
Strong and durable
Overview
Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break!
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80434, Shock Shaft Guards: Traxxas X-Maxx, Green
This is an optional pack of RPM Green X-Maxx Shock Shaft Guards, intended for use with the Traxxas X-Maxx 8S 4WD Monster Truck. Protect your shock shafts and seals from running damage and the deteriorating elements with this simple design. This part replaces the stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well.
The front shield of the guard covers over a impressive 100° of frontal exposure. That means rocks and debris thrown from the front tires or competitors won’t ever hit your shock shafts. RPM Shock Shaft Guards are zero friction protection devices, meaning these guards never touch the working elements of the shocks. As an added bonus, RPM increased the length of the tubular spring support of the spring cup by nearly 2mm (5/64”). The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal.
Features:Over 100° of frontal protectionZero friction protection devicesIncreased spring cup spring supportFits stock Traxxas X-Maxx GTX shocksSold in pairs
This product was added to our catalog on December 16, 2021
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
Features:
Replaces stock Traxxas TRA7737
Includes gigantic 20x32x7mm inner bearings
Massive steering support ribs for the strongest possible carriers
Outer bearings not included (Stock bearings are used)
Sold in pairs (1 Left/1 Right)
This product was added to our catalog on May 18, 2021
RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!
Features:
They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.
RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
This product was added to our catalog on March 2, 2021
RPM80712, Caster Blocks, for Traxxas Electric Slash, Stampede, Rustler, Nitro Slash, Black
Product Details
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Overview
RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.
RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.
Tech Notes: RPM #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede or Slash.
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80742, Rear A-Arm ARRMA Kraton/Outcast 4s BLX
RPM80742, RPM 4S Kraton/Outcast Rear Suspension Arm Set (2)
This product was added to our catalog on December 16, 2021
RPM80812, RPM Arrma Kraton 8S Rear Suspension Arms (2)
RPM Arrma Kraton 8S Rear Suspension Arms are a heavy duty upgrade for the Arrma Kraton 8S & Outcast 8S models. These 26 lbs, high-flying, dirt shredding, jump-killing machines are true monsters. If your A-arms aren’t up to the abuse this massive rig can dish out, look no further than RPM. These replacement rear A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.
RPM rear A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam’s cross-section is a whopping 5/8” (15.8mm) tall x 3/8” (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. RPM also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, the RPM test truck chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there’s nothing worse than a bent chassis.
Made in the USA from RPM's trademark blend of ultra durable materials, you can’t go wrong with RPM!
Tech Notes: RPM Rear A-arms for the ARRMA Kraton 8S are sold as a pair. RPM A-arms replace stock ARRMA ARA330590.
Features:
Sold in pairs
Replaces stock ARRMA ARA330590
Optional Mud Guards also available (RPM80642)
This product was added to our catalog on March 20, 2021
RPM80832, R Shock Tower,Black: RU, ST, BA, SLH
Product Details
Overview
RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede.
RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation.
Product Specifications
Part Type
Shocks & Shock Parts
Refinement Color
Black
Material
Plastic
Overview
Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc.!
Note: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede and Nitro Rustler
Note: Replaces stock Traxxas #2735
Specifications
Material: Composite
Refinement Color: Black
RPM81162, RPM Traxxas Rustler/Stampede Wide Front Bumper (Black)
This product was added to our catalog on December 16, 2021
RPM81332, Rear Skid Plate for most ARRMA 6S vehicles
One of the most expensive replacement items on any vehicle is the chassis, especially when that chassis is a 3-4mm thick aluminum plate. On ARRMA 6S vehicles, there's absolutely no protection for the underside of the chassis. Rocks, roots, asphalt, etc, can all create nasty scabs, scrapes, and dents that will eventually lead to the need for a replacement. Reduce skid and scrape damage by installing this RPM Rear Skid Plate to your favorite ride.
The areas most prone to damage are at the extreme ends of the chassis, and the RPM Rear Skid Plate protects the rear end with 4mm of RPM engineering grade nylons. This Skid Plate is not only extremely tough and durable, it also slides up and over obstacles much easier than aluminum. The leading edge has been rolled to a thin edge to reduce the likelihood of it catching. The rear is a full 4mm thick for a long-lasting skid plate built to handle some serious punishment!
Tech Notes: The RPM #81332 Skid Plate is compatible with V5 & EXB model 6S ARRMA vehicles and is reverse compatible with older version vehicles (V1 - V4) as well. It is designed specifically for the ARRMA Kraton V5, yet will fit most ARRMA vehicles running stock gearbox case set #AR310854 or #AR310427.
Features:
fits most ARRMA 6S vehicles (V5, EXB & older)
its most ARRMA vehicles running stock gearbox case set #AR310427 or #AR310854
fits most Durango vehicles running stock gearbox case set #TD210046
Item Added: 11/29/2021
