Revised version now includes a power switch and additional solder pads.The Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles fits so well you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Power Switch
Dimension: 48x28x12mm
Weight: 10g (without extension cable)
Includes
1x Analog FPV Adapter for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
Wiring Diagram
V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digital FPV Goggles so you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! We also have the V2 Adapter if you don't need the voltage display. Seen below installed in the Aluminum Case we carry specifically for this device:Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!
Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Dimension: 55x28x12mm
Weight: 13g (without extension cable)
Includes
1x Analog FPV Adapter V3 for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
1x Allen Key
Wiring Diagram
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze!
Check out all our 3D printed accessories!
Includes
1x Antenna Holder/Mount for Standoff - 3D Printed TPU
Micro strap suitable for the Armattan Tadpole frame and other micro quads.
Check out the rest of our battery straps and all our Armattan products!
Includes
1x Armattan Micro Anti-Slip Battery Strap
Coated with a white rubber so that your battery will not slip out of place easily. Now with a metal buckle for extra strength.
Check out the rest of our battery straps and all our Armattan products!
Includes
1x Armattan 250mm Battery Strap w/ Metal Buckle
Small dog bone shaped landing pads for various Armattan frames.
Check out the rest of our Armattan products!
Specifications
Size: 2cm L x 1.2cm W x 1.2cm H
3M Adhesive
Includes
1x Armattan 3M Dog Bone Foam Landing Pads - 4 Pieces
Rubber antenna mount for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Beaver 5" Rubber Antenna Mount
TPU antenna mount for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Beaver 5" TPU Antenna Mount
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
After many designs and prototypes, the Armattan Beaver Frame 5" Quadcopter Frame Kit is here! The Armattan Beaver features a strong carbon frame with thicker arms than previous versions which makes it the strongest to date. This frame focuses on noise reduction, easy maintenance, and versatility for use with a variety of electronics. With a weight of 126g, this frame is lighter than previous Armattan frames.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Features
Ease of maintenance: Only one bolt needs to be removed to replace an arm at the field
Well-balanced frame (strength and weight distribution)
Great price point for a high-end, freestyle frame
Thicker arms than any other previous frame
Light and small camera cage
Easy to tune for newcomers
Strong, stiff and light frame
Crash-protection provisions
Good-looking frame
Lifetime warranty
Noise reduction
Versatile
Specifications
Stack Mounting: Two 30.5x30.5mm stacks(center and rear) + Two 20x20mm stacks (4 possible positions)
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Motor Mount Pattern: 16x16 or 16x19 or 19x19mm
Warrantied Parts: All CF and alumi frame parts
Main Plate Thickness: 2.5mm
Frame Shape: Compressed X
Frame Weight: 126 grams
Max Stack Height: 25mm
Motor to Motor: 235mm
Arm Thickness: 5mm
Includes
Carbon Fiber
1x 2mm bottom plate
1x 2.5mm main plate
4x 5mm arms 5 inch
1x 2mm top plate
1x 4mm arm core
Hardware
4x M3 25mm profiled alumi standoff
5x M3 20mm button head iron bolt
6x Aluminum cone spacer orange
5x M3 6mm nylon standoff F/F
20x M3 6mm 12.9 grade bolt
5x M3 10mm 12.9 grade bolt
5x M2 2.5mm cup head bolts
2x M3 20mm alumi standoff
9x M3 12mm cup head bolt
3x M3 16mm cup head bolt
5x M2 18mm cup head bolt
5x M2 nylon washer
14x M3 nylon nuts
5x M2 nylock
Metal
1x Right aluminum cam brace orange
1x Left aluminum cam brace orange
2x Aluminum tail posts orange
2x Aluminum cam saver black
Foam
4x Dog bone landing pads
1x Air unit foam
1x Center foam
1x Lite grip
Accessories
1x 25cm clear heat-shrink 20mm wide
4x Motor wire extension PCB
1x Universal antenna mount
2x White lipo strap
Replacement arm for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Spare Beaver 5" Arm
Replacement arm core for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Spare Beaver 5" Arm Core
Replacement bottom plate for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Spare Beaver 5" Bottom Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Beaver 5" Frame, pieces go missing or break when you choose fun over risk, so we got you covered with this replacement center foam.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Beaver 5" Replacement Center Foam
Replacement main plate for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Spare Beaver 5" Main Plate
Replacement top plate for the Armattan Beaver 5" frame.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Includes
1x Spare Beaver 5" Top Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Introducing the Armattan Bobcat. 4 inch models are making a come back on the FPV scene. This frame supports a Vista, DJI air unit and DJI O3 Air Unit. This frame can become a compressed X frame or a True X frame depending on how you install the arms. A one of kind frame, brought you by the master frame makers at Armattan.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Features
Dual arms configurations
Front and Rear stack mounting
Re-designed camera cage making it lighter and stronger
Specifications
Frame Weight: 57 grams
Motor to Motor: 182mm (Compressed X)
Motor to Motor: 200mm (True X)
Frame Shape: True X or Compressed X (Modular)
Main Plate Thickness: 2.5mm
Arm Thickness: 3mm
Motor Mount Pattern: 12x12 or 9x9mm
Stack Mounting: Dual M3 20x20mm & M2 16x16mm
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Max Stack Height: 20mm
Includes
1x Armattan Bobcat HD 4" Frame Kit
2x Cam Brace
2x Anchor
2x Tail Post
4x Arms 4 inch
1x Center Plate
1x Top Plate
2x Camera Mounting Plate
2x Tie Plate
1x M3 12mm cage standoff
2x M2 20mm cage standoff
5x M2 8mm cup-head bolt
3x M3 12mm button-head bolt (12.9 grade)
3x M3 8mm button head bolt (12.9 grade)
10x M2 6mm cup-head bolt
12x M3 9mm button head bolt
15x M3 sunk nuts
5x M3 20mm bolts
10x M3 nylon nuts
5x M3 6mm nylon standoffs
5x M2 18mm cup-head bolt
5x M2 aluminum nylocks
5x M2 nylon washer
5x M2 metal washer
3x M3 8mm cup-head bolt CW
1x Oomph spacer
2x Lipo strap
1x Top Lite Grip (gel & adhesive foam hybrid pad)
1x Air unit double sided adhesive foam bits
2x Dog-bone landing pads (cuts into 6 pieces, two center pieces can be used as spares)
1x Molded rubber antenna holder
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement aluminum cam brace.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Bobcat HD 4" Replacement Aluminum Cam Brace
Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement arm.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Bobcat HD 4" Replacement Arm (1pc)
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement center plate.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Bobcat HD 4" Replacement Center Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement hardware Set.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Bobcat HD 4" Replacement Hardware Set
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement top plate.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Bobcat HD 4" Replacement Top Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
The Gecko is Armattan's best mini-freestyle frames boasting innovative grip, style & protection. 6-axis titanium milling provides smooth finish & metal camera saver protects cam in crashes. 19mm micro cameras (SD & HD) fit. M2 & M3 board options & 22mm deck height for balanced gravity. Rubber VTX antenna guide & aluminum standoffs safeguard carbon frame. Covered by Armattan's lifetime warranty.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Specifications
Frame Weight: 45g
Motor to Motor: 174mm
Frame Shape: Compressed-X
left & Right: 137mm
front & rear: 107mm
Main Plate Thickness: 3mm
Motor Mount Pattern: 14XX motor pattern
Front Stack Mount: M2, 20x20mm (for HD cam board)
Rear Stack Mount: M3 20x20mm (for FC stack)
FPV Camera Mount: Micro compatible
Max Stack Height: 22mm
Motor Mounting: 12x12mm
Includes
1x Armattan Gecko HD 4" Frame Kit
2x Camera-cage braces
8x 6mm button-head M3 bolts
4x 4mm button-head M3 bolts
4x 16mm buton-head M3 bolts
2x 5mm cup-head M2 bolts
2x M3 sunk nuts
2x Camera-saver braces
1x 19.1mm Front standoff (silver)
2x Rear standoffs (black)
4x M3 nuts
2x Washers
1x 2mm Top (LiPo) plate
1x 3mm Main plate (4 inch)
1x Lipo strap
1x LiPo foam pad
4x Dog-bone landing pads
1x Molded rubber VTx antenna holder
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Gecko 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement hardware set.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Gecko HD 4" Replacement Hardware Set
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Gecko 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement main plate.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Gecko HD 4" Replacement Main Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Gecko 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement titanium left brace.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Gecko HD 4" Replacement Titanium Left Brace
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Gecko 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement titanium right brace.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Gecko HD 4" Replacement Titanium Right Brace
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Replacement part for the Armattan Gecko 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement top plate.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Gecko 4" Replacement Top Plate
This new strap can be used on a 2s, 1600mAh battery all the way up to a 4s, 3000 mAh battery. It fits all Armattan models. It is coated with rubber so that your battery will not slip out of place easily. Now with a metal buckle for extra strength.
Check out the rest of our battery straps and all our Armattan products!
Includes
1x Armattan Anti-Slip Battery Strap
Replacement main plate for the Armattan Odonata
Check out our other Micro frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Odonata Main Plate
Introducing the Armattan Odonata, the smallest FPV frame we have ever produced. But do not let the small size fool you. This model was designed and put through testing phases by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. We figured it was best to let him describe this frame so here's what he has to say about it.
The Odonata is a nano drone that fits in your pocket, rips like a boss, and hums like a dragonfly (true to its namesake). Fits through the tiniest of gaps, and makes worlds out of small spots.
1.5mm thick carbon fiber plates make for great durability, and the custom delrin standoffs are almost half the density of the standard aluminum ones (while retaining the needed strength), making the Odonata one of the lightest frames on the market, in a class where weight is the #1 priority. Fully thought out, the Odonata offers proper motor protection, camera protection, and build durability. A top mounted battery makes for easy access, and optimal flight characteristics.
The Odonata captures the essence of whoops and boosts their performance, durability, and ease of use. With a nearly identical wheelbase, the Odonata has a not-so-identical amount of performance, versatility and fun, however. It's a better flyer.
For those of you who can print your own parts, you can find the .stl files here.
Check out our other Micro frames, as well as the rest of our Armattan selection!
Armattan Lite Disclaimer
Armattan Lite frames are not lifetime warrantied; they are built for a different purpose. They will, however, be priced accordingly (read: very competitively). Armattan Lite will offer spare parts for cheap and continue to support one of the original visions of the company; to keep guys in the air without milking them for replacements.
Includes
1x 1.5mm Main Plate
1x 1.5mm Top Plate
8x M2 5mm Iron Cup Head Bolts
4x M2 10mm Iron Cup Head Bolts
8x M2 Nylon Nuts
4x Delrin M2 15mm Standoff
1x Cam Mount for Foxeer Razer Pico
4x Rubber Bands
1x Antenna Tube
2x Landing Dogbone pads
Replacement top plate for the Armattan Odonata
Check out our other Micro frames, as well as the rest of our Armattan selection!
Includes
1x Armattan Odonata Top Plate
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
The Armattan Tadpole HD is basically the same as the original Tadpole except it has additional provisions and design implementation allowing it to be built using analog or digital gear. A bit like a Tadpole V2 in a way. All in all, this is a revamped version of the ever-popular Armattan Tadpole.
Check out our other 3" frames, as well as the rest of our Armattan selection!
Specifications
Wheelbase: 137mm
Frame Style: Compressed X
Main Plate Thickness: 2.5mm
Top Plate Thickness: 2mm
Stack Size: 16x16mm, 20x20mm, 25x25mm
Stack Height: 18mm
Motor Mount: 9mm Φ
Camera Mount: Micro
Weight: 26g
Includes
1x Armattan Tadpole HD 3" Frame for DJI
Whoop FC adapter for the Tadpole frame.
Check out our Tadpole Parts and all our Armattan products!
Includes
1 Carbon fiber bracket (1mm)
2x M2 10mm bolts
2x M2 12mm bolts
8x M2 Nylon Nuts
Get this heavy duty transmitter neck strap by Armattan also doubles as very reliable and stylish Lanyard.
Check out the rest of our transmitters, parts & accessories, and all our Armattan products!
Includes
1x Armattan Transmitter Strap / Lanyard
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC Dolphin Plane Kit is a durable lightweight plane with molded EPP embedded with carbon fiber tubes. Features include a detachable nose and wings, integrated GoPro mount, fuselage protector, and other cool features!
This is a kit you will need a receiver, battery, ESC, motor, and FPV system.
Find the FPV PNP and PNP versions here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Carbon fiber tubes help keep wings rigid during flight
Detachable wing, easy to transport.
Detachable nosecone for GoPro mounting
V tail design for added stability
Pre-installed wing and fuselage protector for durability
Compatible with GoPro Hero 5-7.
Movable battery slot for “CG” adjustment.
Pre-installed camera and VTX antenna cable for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Propeller recommend: 5~6 inch
Battery recommend : 4S 1300-2200mah
Dimension: 660*225*135mm
Includes
1 x Dolphin Kit
1 x Ball Push/Push Rod
1 X Sticker
1 x Battery Strap
1 x Camera Cable
1 x SMA to UFL VTX cable
1 x Screws
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC PNP Dolphin Plane is a durable lightweight PNP plane with molded EPP embedded with carbon fiber tubes. This has everything you need to fly, just add an RX and and FPV system. Features include a detachable wings and nose, fuselage protector, integrated GoPro mount, and other cool features!
Unlike most PNP planes, you will have to install the included electronics.
Find the Kit version here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Detachable wing, easy to transport.
Carbon fiber tubes help keep wings rigid during flight
V tail design for added stability
Detachable nosecone for GoPro mounting
Air inlet and outlet for FPV gear cooling.
Compatible with GoPro Hero 5-7.
Pre-installed wing and fuselage protector for durability
Movable battery slot for “CG” adjustment.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Dimension: 660*225*135mm
Propeller recommend: 5-6 inch
Battery recommend : 4S 1300-2200mah
Includes
1x Dolphin KIT
1x 2306 Motor
1x ATOMRC Exceed 9g Servo
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
This lightweight, dual motor glider is sure to get you maximum flight time! This quiet and efficient wing is great for beginners or even the most experienced aviators!
We also sell this wing without the FPV system, for line of sight flying, or adding your own custom FPV setup.
Check out all our PNP wings, as well as our AtomRC selection!
Features
Compact size(only 650 wingspan), swift and durable, easy for beginners
The special designed 2 in 1 ESC and VTX makes the electronics wiring clean
Come with PNP/FPV version, all part is installed, no need glue or soldering anymore
Sub 250g design, makes the glider fly without regulation, also easy to fly in the park and small area
Specifications
Wingspan: 650mm
Length: 570mm
Material: EPP
Wing Area: 6.15 dm²
Recommend motor: 1105 5000KV
Recommend prop: 3016-3 Blade
Recommend battery: 3S 750mah
Servo: 4.3g servos
Includes
1x Pre-built plane
1x ATOMRC Exceed 2in1 BLS 10A ESC (Bulid in 5V BEC,Input 2~4s.)
2x 1105 5000KV Motor
4x 4.3G Digital Servo
4x 3016-3 Propeller
1x ATOMRC TX500 VTX
1x Foxeer Razer Nano 1200TVL 14mm CAM
1x 5.8G Antenna
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC RTH Dolphin V1.1 is a 845mm wingspan V-tail plane. The Dolphin can fly stable at high and low speeds, and the large fuselage offers lots of space to install the electronics. The detachable wing made the wing easy to transport, V tail made the Wing more stable for cruising. This wing has a black body with white accents and stickers to further style your craft. This wing will come with an AtomRC F405 NAVI FC, allowing you to use the Return To Home(RTH) feature as the RTH version can come right back to you and land. It's good to know about the flight controller having the ability to use two firmware INAV or Arduplane, both firmware's already pre-turned for the plane. This wing comes as a pre-built kit, PNP, pre-tuned, and with all electronic are pre-installed. This wing is perfect for beginners and stress free for veterans.
Note: You are going to need; Radio, Receiver, Battery, and a Charger. Although this system has Return To Home (RTH) included, you will need to add components like a camera and VTX for FPV.
Ardupilot parameter settings can be found here.
Browse the rest of our PNP wings, as well as our AtomRC selection!
Features
EPP molded wing, embedded with carbon fiber tube, durable and light weight.
Carbon fiber tube enhanced elevens, more rigid elevens during high speed fight.
Detachable wing, portable to transport.
Detachable head, two head for choice, use can choose fly with Gopro or without Gopro.
Rubber band and magnet to lock the Gopro, easy to install the Gopro.
V tail design make the wing more stable than normal fly wing.
Pre installed wing and fuselage protector, more durable during landing.
Compatible with GOPRO hero 5-7.
Movable battery slot for better “CG” adjustment.
Pre installed camera cable and antenna for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Motor: AtomRC 2306 1700Kv (included)
ESC: AtomRC BLS 30A 2-4S with 5V/3A BEC (included)
Servo: AtomRC 9g Digital Servo 300mm 2pcs (included)
FC: AtomRC F405 NAVI (included)
GPS: BN220
Prop: 7042-2
Material: EPP
Package Size: 675 x 174 x 285mm
Length: 710mm
Recommendations
Recommend Propeller: 5-7" (Comes with 2 Bi-Blade 7" Props)
Recommend Battery: 4S 1300-2200mah (Not Included)
Recommend Radio: more than 6CH (Not Included)
Includes
1x AtomRC RTH Dolphin V1.1 FPV Fixed Wing - Black/White
1x AtomRC BLS 30A 2-4S with 5V/3A BEC (Installed)
2x AtomRC 9g Digital Servo 300mm (Installed)
1x AtomRC 2306 1700Kv (Installed)
1x AtomRC F405 NAVI (Installed)
1x Sticker Sheet
1x User Manual
1x Carbon Tube
2x 7042 Props
All batteries must be shipped by a ground shipping method.
3S 3000mAh battery perfect for long-range wings & quads.
Check out the rest of our Auline products and our whole battery collection!
Features
XT30 Connector
High-Quality Sony VTC6 cells
Great for wings and efficient quads
Max 30A output
Specifications
Capacity: 3000mAh
Voltage: 11.1V
Connector: XT30
C-Rate: 10C/ 30A Max
Recommended Charge Rate: 1C / 3A
Weight: 150g
Includes
1x Auline 11.1V 3S 3000mAh 10C Li-Ion Battery - XT30
All batteries must be shipped by a ground shipping method.
At 4800mAh this pack is sure to last as long as you need! With high capacity and low discharge, this battery is perfect for everything from goggles to bench testing.
Make sure to check out our other 3s batteries as well as the rest of our Auline collection!
Specifications
Nominal Voltage: 11.1
Capacity: 4800mAh
Discharge Rate(Cont./Burst): 1C / 4.8A
Dimensions: 95x42x42mm
Connector: XT60
Weight: 249g
Includes
1x Auline 11.1V 3S 4800mAh 1C Li-Ion Battery - XT60
All batteries must be shipped by a ground shipping method.
Check out the rest of our Auline products and our whole battery collection!
Features
XT60 Connector
Great for Long Range flying, Cinewhoops, and Wings
Long lasting
Specifications
Capacity: 2000mAh
Voltage: 14.8V
Connector: XT60
C-Rate: 15C
Weight: 194.6g
Includes
1x Auline 14.8V 4S 18650 2000mAh 30C Li-Ion Battery - XT60
All batteries must be shipped by a ground shipping method.
4S Lithium-Ion battery for the DJI FPV Goggles. Connect the XT60 to a DC power cable and connect the DJI FPV Goggles to the battery.
Check out the rest of our Auline products, DJI FPV System Parts & Accessories, and our whole battery collection!
Features
XT60 Connector
Made specifically to power DJI Goggles
Long lasting
Protective board
Specifications
Capacity: 2600mAh
Voltage: 14.8V
Connector: XT60
C-Rate: 1C
Weight: 202.4g
Includes
1x Au line 14.8V 4S 18650 2600mAh 1C Li-Ion Battery w/ Built-In Protective Board - XT60
All batteries must be shipped by a ground shipping method.
6S 4000mAh battery perfect for long-range wings & quads.
Check out the rest of our Auline products and our whole battery collection!
Features
XT60 Connector
Great for wings and efficient quads
Max 35A output
Specifications
Continuous Discharge Current: 35A
Dimensions: 75x65x45mm
Weight: About 420.5g
Capacity: 4000mAh
Type: Li-ion Battery
Cell: 21700 40T
Cells: 6S1P 6S
Voltage: 22.2V
Brand: Auline
Plug: XT60
Includes
1x Auline 22.2V 6S 21700 4000mAh 35A Li-Ion Battery - XT60
All batteries must be shipped by a ground shipping method.
6S 3000mAh battery perfect for long-range wings & quads.
Check out the rest of our Auline products and our whole battery collection!
Features
XT60 Connector
High-Quality Sony VTC6 cells
Great for wings and efficient quads
Max 30A output
Specifications
Capacity: 3000mAh
Voltage: 22.2V
Connector: XT60
C-Rate: 10C/ 30A Max
Recommended Charge Rate: 1C / 3A
Weight: 297g
Includes
1x Au line 22.2V 6S 3000mAh 10C Li-Ion Battery - XT60
All batteries must be shipped by a ground shipping method.
These Aulines are powerful Lipo batteries that are best suited for long-range and cruising flights! This 6S battery is equipped with a 3300mAh capacity, 22.2V, and comes with an XT-60 connector.
Check out the rest of our Auline products and our whole battery collection!
Features
XT60 Connector
High C rating
Tons of MAH
Lipo Battery
Specifications
Capacity: 3300mAh
Voltage: 22.2V
Connector: XT60
C-Rate: 45
Recommended Charge Rate: 1C
Weight: 430g
Dimensions: 135x42x35
Includes
1x Auline 22.2V 6S 3300mAh 45C Lipo Battery - XT60
All batteries must be shipped by a ground shipping method.
Auline has made a great addition to your Fatshark goggles. This battery features 2 21700 cells, perfect for powering your goggles for a long time. It even fits in your goggle strap for easy placement.
Check out our other 2S batteries, as well as the rest of our Auline selection!
Specifications
Nominal Voltage: 7.4V
Cells: 2S
Capacity: 4800mAH
Discharge Rate: 1C
Composition: Li-Ion
Discharge Lead: XT30 34.5mm
Balance Lead: JST-XH 37.5mm
Dimensions: 73x42x21mm
Weight: 158g
Includes
1x Auline 7.4V 2S 4800mAH 1C Li-Ion Battery for Fatshark Goggles - XT30
All batteries must be shipped by a ground shipping method.
The Auline 14.8V 4S 1550 mAh 120C LiPo Battery is the perfect solution for your 5" quads. The SR series provides reliable, efficient power with a long flight times. Including an XT60 connector ensures a secure connection, delivering reliable and consistent power.
Check out our selection of 4S batteries, and the rest of our Auline products
Specifications
Brand: Auline
Capacity: 1550mAh
Voltage: 14.8V
C-Rate: 120C
Weight: 176.6g
Charging: 1C-Max2C
Assemble: 4S1P
Plug: XT60
Noted: EX
Includes
1x Auline EX 14.8V 4S 1550mAh 120C LiPo Battery - XT60
