PTK-5322, ProTek RC Heavy Duty T-Style Ultra Plug RACE Lead (Female Plug to 5mm Bullet)
This is a ProTek R/C Heavy Duty Ultra Plug™ RACE Lead, with a genuine Female Ultra Plug™ to 5mm Bullet Plugs. Use this lead to connect any battery with 5mm sockets to an ESC with a Deans plug. Using a genuine Deans Ultra Plug™, ProTek R/C 5.0mm "Super Bullet" Solid Gold Connectors and 10awg wire, this pre-built lead will provide you with a low resistance connection for any 2S race and bashing application.
This product was added to our catalog on December 16, 2021
PTK-5326, ProTek RC 2S Charge/Balance Adapter (4mm to 5mm Bullet Connectors)
This is a heavy duty 2S hard case lithium polymer battery charge/balance adapter lead from ProTek R/C. This 13" long charge lead allows you to plug a 2S battery with 5mm female bullet connectors directly to your charger, eliminating the need for a balance board!
This adapter lead features 4mm banana plugs on the charger end, and 5mm banana plugs on the battery end, connected with 14awg wire. The balance wires include a 2mm banana plug on the battery end, with a 7-pin XH plug connected with 22awg wire for balancing that is plugged directly into the 6S balance port in the charger.
This charge lead is specifically designed to connect a ProTek R/C 2S LiPo hard pack with 5mm connectors to ProTek R/C chargers, but will also work with any charger that uses 4mm bullet connectors for output, and has a 7-pin (6S) XH balance port.
This product was added to our catalog on December 16, 2021
PTK-5332, ProTek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH)
This is the ProTek R/C 1S 12-Battery Parallel Charger Board. Do you have a lot of micro flight batteries to charge? The ProTek R/C Parallel Charge Board will charge up to twelve 1S LiPo flight batteries simultaneously. Six charge ports are compatible with MX connectors (also known as pico or ultra micro), used on the mSR and other ultra micro aircraft. Six more charge ports are included featuring 2-pin JST-PH connectors found on Blade, E-flite and ProTek R/C batteries. Your battery charger must be compatible for LiPo chemistry and the parallel charge process only works when charging batteries of the similar age and of similar discharge states. As long as these needs are met, plug in your 1S batteries to the Parallel Charge Board and let the juice flow.
Warranty Info Icon smallImportant Parallel Charging Rules:
Only charge LiPo chemistry batteries Only charge 1S LiPo batteriesOnly charge batteries with similar states of discharge (within 0.2V)Always program the charger to the total capacity of all attached batteries (Example: if charging five 200mAh batteries, set the charger to 1,000mAh. *It is ok to charge batteries with different mAh capacities)Features:
Charge twelve batteries at onceConvenient XM and 2-Pin JST-PH battery connectors4mm gold bullet input connectors Specifications:Batteries: 12x 1S 3.7V batteriesBattery Connector: 6x Ultra Micro & 6x 2-pin JST-PHInput Connector: 4mm Gold BulletInput Connector Length: 5.50in (13.9cm)Dimensions (LxWxH*): 2.5x1.25x0.5in (6.4x3.2x1.2cm)
This product was added to our catalog on December 16, 2021
PTK-5335, ProTek RC 2S-6S 4-Battery Parallel Charger Board (T-Style/JST-XH)
This is the ProTek R/C 2S-6S 4-Battery Parallel Charger Board. Do you have a lot of batteries that take forever to charge? The ProTek R/C Parallel Charge Board will charge up to four LiPo batteries simultaneously, and also balance the individual cells of each battery during the charge process. If charging four batteries simultaneously doesn't satisfy demands, two Parallel Charge Boards can be daisy chained to charge eight batteries at once!
Be Advised: Some newer batteries (like some GensAce) come with balance plug protectors which are slightly bulky and do not properly fit this board. You will need to remove the protector or find an alternative method.
The Parallel Charger Board is also compatible with Li-Ion and LiFe Batteries. Of course, the battery charger must be compatible for the chosen battery chemistry and only that battery chemistry can be charged at once with the board (example: don't mix LiPo's with LiFe's). Additionally, the parallel charge process only works when charging batteries of the same cell count, similar age and of similar discharge states. But as long as these needs are met, plug in your batteries' T-Style/Deans power connector (or adapter) and the XH balance plug to the Parallel Charge Board, and let the juice flow.
Other features include an impact resistant custom molded plastic hard case, replaceable DC input fuse, replaceable battery port fuses, and self-resetting polyfuses protecting all balance ports.
Important Parallel Charging Rules:
Only the same battery chemistry can be charged at once (don't mix LiPo's with LiFe's, etc.)
Only same celled Lithium batteries can be charged at once (don't mix 4S with 6S, etc.)
Only charge batteries with similar states of discharge (within 0.2V)
Always program the charger to the total capacity of all attached batteries (if charging four 5000mAh batteries, set the charger to 20,000mAh, etc. It is ok to charge batteries with different mAh capacities)
Features:
Charge four batteries at once
Charge from 2S to 6S Lithium batteries
Balances each individual cell of each battery
Daisy chain multiple boards for additional charging
Convenient T-Style battery connector
4mm gold bullet input connectors
40A max current
Replaceable DC input fuse
Replaceable battery port fuses
Self-resetting polyfuses protect balance circuits
Impact resistant custom molded plastic hard case
Specifications:
Voltage: 0-22.2V DC
Max Current: 40A
Batteries: 4 packs (must be same capacity & cell count)
Battery Connector: T-Style/JST-XH
Input Connector: 4mm Gold Bullet/JST-XH
Input Connector Length: 6.75in (17.1cm)
Dimensions (LxWxH*): 6.8x3.9x0.75in (17.2x9.9x1.9cm)
*Height is 1.25 inches from the top of fuses
Note: When using the Parallel Charge Board you will lose the ability to monitor each pack independently. The information the charger displays will be an average of all the cells attached.
This product was added to our catalog on December 16, 2021
PTK-5341, ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) (10awg Wire) (24")
The ProTek R/C 2S High Current Charge/Balance Adapter is the solution you have been waiting for if you charge/discharge your 4mm bullet batteries at higher than normal amp rates, or need a heavy duty low resistance charge cable. Featuring huge 10awg wire at 24" length, gold plated 4mm bullets for the battery connection and 4mm bullet connectors for the charger connection, with an XH balance tap, this charge cable is one of a kind. The coiled jacket helps to keep the adapter flexible and tangle free and finishes off a package that will keep your work space clean and organized.
Features:
Fits chargers that use 4mm bullet charging inputs
Hi-Amp gold plated 4mm bullets for battery connection delivers higher amp carrying capacity
Hi-Amp gold plated 4mm bullets on charger side
10awg wire to handle high current demands
Coiled jacket helps to prevent tangles
Length 24" (61cm)
This product was added to our catalog on August 26, 2021
PTK-5343, ProTek RC XT30 Charge Lead (Male XT30 to 4mm Banana Plugs) (6" / 15.24cm)
This is the ProTek R/C XT30 Charge Lead, featuring a male XT30 on one end connected to a serrated 4mm banana plugs with high quality 16awg silicone wire. The lead length measures 6.0 inches (15.24cm) end to end.
This product was added to our catalog on December 16, 2021
PTK-5344, ProTek RC "Squid" Multi Connector Charge Lead
This is the "Squid" multi connector charge lead from ProTek R/C. This lead connects to your charger with standard 4mm banana plugs, and allows you to charge nearly any battery. This charge lead includes a XT60 connector, T-Style Ultra Plug connector, JST connector, Futaba connector, two different transmitter charge connectors, and even has a loop soldered in that you can cut to add two of your own specialized connectors. So if you are looking for one charge lead that does it all this is the charge lead for you.
This charge lead also includes caps for the exposed charge leads for the DC transmitter leads and T-Style plug.
This product was added to our catalog on December 16, 2021
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
PTK-5354, ProTek RC Heavy Duty EC3 Style Charge Lead (Male EC3 to Female XT60)
The ProTek R/C Heavy Duty EC3 Charge Lead Adapter features a "male" EC3 with male bullets, connected to a female XT60. Thanks to the 6 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections, allowing you to connect your EC3 plug equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
PTK-5356, ProTek RC Heavy Duty QS8 Charge Lead (Male QS8 to Female XT60)
This is the ProTek RC Heavy Duty QS8 Charge Lead, featuring a male QS8 on one end connected to XT60 with high quality 10awg silicone wire. Package includes one charge lead.
This product was added to our catalog on December 30, 2022
This ProTek R/C 2S Charge/Balance Adapter features a T-Style connector and is intended for use with 2S LiPo batteries that have 8mm output sockets. This adapter cable will allow you to balance charge your 8mm socket equipped batteries easily, eliminating the need to build your own cable. Package includes one charge/balance adapter.
PTK-5358, ProTek RC Heavy Duty QS8 Charge Lead (Male QS8 to Female XT90)
The ProTek R/C Heavy Duty QS8 Charge Lead Adapter features a male QS8 connected to a female XT90. This adapter is designed for the Junsi 456DUO and 458DUO, as well as, any chargers that use an XT90 charge port. Package includes one charge lead.
This product was added to our catalog on February 27, 2024
PTK-5364, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug)
ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 458DUO and 456DUO for charging 2S 4mm bullet batteries. Package includes one charge lead.
This product was added to our catalog on February 27, 2024
PTK-5365, ProTek RC 2S Charge/Balance Adapter (5mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug)
ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 456DUO and 458DUO for charging 2S 5mm bullet batteries. Package includes one charge lead.
This product was added to our catalog on February 27, 2024
PTK-5367, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (9pin XH balance plug)
ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 458DUO for charging 2S 4mm bullet batteries. Package includes one charge lead.
Note: This Charge lead has a 9pin XH balance plug and is not compatible with the Junsi 456DUO
This product was added to our catalog on February 27, 2024
PTK-5368, ProTek RC 2S Charge/Balance Adapter (5mm Bullet Connectors to Female XT90) (12awg) (9pin XH balance plug)
ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 458DUO for charging 2S 5mm bullet batteries. Package includes one charge lead.
Note: This Charge lead has a 9pin XH balance plug and is not compatible with the Junsi 456DUO
This product was added to our catalog on February 27, 2024
