SPMXC1040, Spektrum RC S44 AC/DC 1S LiPo Smart Charger
The Spektrum Micro 4 charger is a 4-port tool for the RC pilot who wants the ultimate in 1S LiPo battery charging. Featuring Spektrum Smart Charging technology, its digital LED status screen delivers vital battery information in a clear manner the instant you connect. Its compact all-in-one design incredibly offers four independent charging channels, each with enough built-in connectors so that charging multiple 1S batteries with the highest level of precision is easy.
Each of the four charging channels is built-in with independent circuitry to enhance charge precision and efficiency. Vivid LED status lighting includes individual 4-digit displays and multi-color LEDs so you can instantly see the charge phase and battery condition. The simple press-dial interface allows you to finely tune the charge rates from 0.05 to 1.2A making it possible to fast-charge most high rated batteries. Exclusive software detects LiPo and LiHV 1S batteries automatically and combines with Spektrum Smart Charging technology so your batteries get maximum protection against short circuit, over current, reverse polarity and input voltage errors.
The Micro 4 AC/DC system works when connected to a standard wall outlet or you can even take the Micro 4 charger on the go. Because it will accept power input sources as low as 5V, any standard USB power source can be used such as a laptop or similar. Unlike charging multiple 1S batteries in parallel, each battery is individually recognized. As a result, you can charge individual 1S batteries with the precision of much more expensive charge units and possibly extend the life of all of your 1S batteries.
Four Precision Charge PortsFour individual charge circuits and four separate charge ports make it possible to charge multiple 1S packs with precision. Choose the exact charge rate you need from 0.05 to 1.2 amps using the individual dials that combine with a 4-digit display and a multi-color status LED system so you can keep a fleet of batteries working hard for you.
Easy to UseSimply connect your 1S battery into one of the charge ports and the Micro 4 instantly displays battery voltage. The Micro 4 conveniently powers from a standard 120V wall outlet or remote power source. Its pushbutton dial keeps programming all four charge ports simple while the LED displays clearly show charge status, rate, voltage and more.
Compact DesignEach of the four ports features four connector types to select from so there are no cumbersome adapters to untangle. Lightweight and small in size makes it even easier to stash into a backpack and take anywhere.
Features
Smart charging features include protection against a short circuit, over current and more
Simple, one-touch command dial interface makes operation easy
Four independent ports for the ultimate in charge precision
Individual LED displays show battery current, capacity and voltage
Versatile design includes four connector types built into each charge port
Independent charging circuits for improved speed and efficiency
Charge flexibility with adjustable charge currents from 0.05 to 1.2A
Integrated cooling system promotes unit reliability
Visual and audio charge status indicator system
AC/DC, plus USB power input options
Specifications:
Type: Molex/JST/UM/PH
Input: 100-240 Volts AC; 11-15 Volts DC
# Cells: 1S
Charge Rate: 4 x 4W; 0.1 - 1.0A
Input Connector: AC cord, detachable, North American plug
Output Connector: Molex / JST / UM / PH
Battery Type: LiPo
Voltmeter: Yes
Amp Meter: Yes
LED: 4-Digit LED
Length: 5.2in
Width: 3.9 in
Height: 2.0 in
This product was added to our catalog on January 9, 2022
SPMXC2000 ,Spektrum RC S2100 G2 AC Smart Charger (6S/12A/100W x2)
This is the Spektrum RC S2100 G2 AC Smart Charger. Featuring two channels with up to 100W per channel the Spektrum S2100 G2 AC Smart Charger offers fast, easy charging, especially for modelers using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3 or IC5 output ports, and more!
Features:
Up to 100W power per channel or 200W on one channel for fast charging
Charges and balances Smart G2 batteries with one simple IC3 or IC5 connection — no separate balance lead needed
Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected
Charges virtually any RC battery (use Smart batteries to benefit from all charger features)
Smart software tracks and stores numerous Smart battery data
Includes IC3 and IC5 charging output ports — eliminating the need for a separate IC3 or IC5 adapter
Large, 2.4" display screen
An on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Updated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttons
USB input and output ports are included for updating firmware and charging secondary devices
ON/OFF switch eliminates the need to plug in and unplug the power cord for ON/OFF control
Detachable power cord makes transporting more convenient
Includes an efficient, low-noise cooling fan
Sleek, sturdy case fits well on a workbench and in pit or field bags
Handy rubber grips on case make it easier to plug in and remove batteries
IC3 and IC5 connectors are backwards compatible with EC3 and EC5 connectors
Specifications:
Width: 5.7" (145mm)
Length: 5.7" (145mm)
Height: 4.1" (104mm)
Weight: 2.4lb (1070g)Balance Connector: JST-XH
Battery Temperature Monitoring: Yes
Charge Protection Circuitry: Yes
Number of Cells: 1 - 6S Li-Ion/LiPo/LiFe, 1 - 16S NiCd/NiMH, 1 - 12S Pb
Number of Output Ports: 2
Power Source: AC
Selectable Charge Rate: Yes
Over Current Protection: Yes
USB Power Out: Yes
Battery Type: Smart, Non Smart
PC Connectivity: Yes
Programmable: Yes
Safety Timer: Yes
Integrated Balancing: Yes - Internal Balancer & Internal Adapter
Charge Rate: 0.1 - 12.0A, adjustable in 0.1A increments (200W Max)
Software Updates: Yes
Technology: Smart
Amp Meter: Yes
Output Connector: IC3, IC5
Peak Detection: Yes
Short Circuit Protection: Yes
Connector Type: IC3, IC5
Discharge: 0.1 - 1.5A, adjustable in 0.1A increments (15W Max)
Maximum Charge Rate: 10 to 14 Amps
Reverse Polarity Protection: Yes
Thermal Protection: Yes
Voltage Meter: Yes
Display: 2.4" 320 x 240 IPS LCD
Input Voltage: 100 - 240V AC, 50 - 60 Hz
Power (watts): 100 - 199W
Includes:
(1) S2100 Smart AC Charger
(1) Power Cord
(1) Manual
This product was added to our catalog on October 14, 2022
SPMXC2010, Spektrum RC S2200 G2 AC LiPo Smart Charger (6S/20A/200W x2)
This is the Spektrum RC S2200 G2 AC LiPo Smart Charger, with two channels with up to 200W per channel. The Spektrum S2200 Smart G2 AC Charger offers fast, easy charging, especially for modelers using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3 or IC5 output ports, and more.
Features:
Up to 200W power per channel or 380W on one channel for fast charging
Charges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead needed
Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected
Charges virtually any RC battery (use Smart batteries to benefit from all charger features)
Smart software tracks and stores numerous smart battery data
Includes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapter to charge Spektrum Smart batteries
Large, 2.8" display screen
An on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Updated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttons
USB input and output ports are included for updating firmware and charging secondary devices
ON/OFF switch eliminates the need to plug in and unplug the power cord for on/off control
Detachable power cord makes transporting more convenient
Includes an efficient, low-noise cooling fan
Sleek, sturdy case fits well on a workbench and in pit or field bags
Handy rubber grips on case make it easier to plug in and remove batteries
IC3® and IC5® connectors are backwards compatible with EC3™ and EC5™ connectors
Specifications:
Normal/Standard Charge Rate: 0.1 - 20.0A
Product Width: 5.67" (144 mm)
Technology: Smart
Application: RC Model Battery Charger
Reverse Polarity Protection: Yes
Selectable Charge Rate: Yes
Software Updates: Yes
Hard Case: Yes
Over Current Protection: Yes
Integrated Balancing: Yes - Internal Balancer & Internal Adapter
Charge Protection Circuitry: Yes
Input Voltage: 100 - 240V AC
Maximum Continuous Discharge Rate: 1.5A
Output: 2 x 200W, or 380W on one channel
Battery Balance Connector: JST_XH
Maximum Charge Rate: 20A
Low Input Voltage Protection: Yes
PC Connectivity: Yes
Product Weight: 37.7oz (1070g)
Discharge: 0.1 - 1.5A
Number of Cells: 1 - 6S LiPo, LiIon, LiFe, 1-16 cell NiMH, NiCd, 1-12 cell Pb
Safety Timer: Yes
Short Circuit Protection: Yes
Amp Meter: Yes
Product Height: 4.13" (105 mm)
Product Length: 5.7" (145 mm)
Voltage Meter: Yes
Display: 2.8" LCD
Output Connector: IC3 and IC5 selectable
Peak Detection: Yes
Thermal Protection: Yes
Programmable: Yes
Battery Temperature Monitoring: Yes
Cooling Method: Fan
Includes:
(1) S2200 Smart G2 AC Charger
(1) Power Cord
(1) Manual
This product was added to our catalog on March 9, 2021
SPMXC2050, Spektrum RC S155 G2 AC Smart Charger (2-4S/5A/55W)
The Spektrum S155 G2 AC Smart Charger makes advanced, user-friendly Smart G2 charging technology affordable for any RC hobbyist. It is a great option for cost-conscious drivers and pilots who want the features and functions only a Smart charger can provide.
This charger comes compatible with 4S LiPo, LiFe, Li-Ion, or LiHV batteries as well as 1-12S NiMH and NiCd packs, equipped with a IC3 or IC5 connector. Generation 2 Smart technology enables the S155 to both charge and balance Smart G2 batteries using one simple connection. No separate balance lead is needed. When connected to a Smart battery, its Auto Charge feature recognizes the correct charging parameters instantly and begins safe, proper charging automatically.
The LCD screen with improved menus, icons, and navigation tools allows users to monitor charging progress and make setting changes with ease. An on-screen clock counts down the minutes in real time until your Smart battery is fully charged and ready to use.
Features:
Advanced, user-friendly Smart G2 charging technology that fits into any hobby budget
Delivers 55W of charging power
Includes selectable IC3 and IC5 charging ports — no separate adapters required
Charges up to 4S LiPo/LiFe/Li-Ion/LiHV batteries and 1-12S NiMH/NiCd packs
Color LCD screen interface features intuitive menus, icons, and navigation tools
Clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Auto Charge recognizes Smart battery charging parameters and starts charging automatically when connected
USB input for updating firmware
Sleep mode
Detachable power cord
Sleek, sturdy case fits well on your workbench and in pit/field bags
Specifications:
Input Voltage: 100-240V, 50-60Hz
Cell Count: 2-4S
Battery Type: LiPo (3.7V per cell)
Maximum Charge Rate: 18.4V, 5A (Max)
Length: 4.4" (112 mm)
Width: 2.4" (61 mm)
Height: 2.4" (61 mm)
Weight: 12.2 oz (345 g)
Output Connector: IC3 and IC5 (Selectable)
Battery Balance Connector: JST_XH
Display: LCD
Includes:
(1) Spektrum S155 AC Smart Charger
(1) Power Chord
(1) Manual
This product was added to our catalog on January 9, 2022
SPMXC2060, Spektrum RC S250 AC 2x50W Smart Charger
The 2-channel S250 Smart AC Charger — from the new "Generation 2" of Spektrum™ Smart electronics — brings today's most advanced and user-friendly charging technology to RC pilots and drivers of all skill levels.
This product was added to our catalog on October 17, 2023
SPMXG2PS6, Spektrum RC Smart G2 PowerStage 6S Bundle w/Two 3S Smart LiPo Batteries (5000mAh)
This is a Spektrum RC Smart G2 Powerstage 6s Bundle with two 3s Smart G2 LiPo Hard Case Batteries, bundled together with a powerful G2 S2200 charger, in an all in one-box solution for vehicles requiring 6s power.
Spektrum Smart G2 Battery
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery are upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. The updated G2 performance batteries feature an all in one connector that eliminates the need for a balance connector, as the balance process is done through the charger and the battery connector. The smart batteries also come programmed from the factory to self discharge to a safe 3.90V per cell after 72hrs of inactivity. All of the functions and features placed in this battery are intended to supply the user with a powerful and safe lithium battery.
Spektrum Smart G2 Charger
The Spektrum S2200 Smart G2 AC Charger offers fast, easy charging, especially for modelers using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3 or IC5 output ports, and more.
Features:
Charger
Up to 200W power per channel or 380W on one channel for fast charging
Charges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead needed
Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected
Charges virtually any RC battery (use Smart batteries to benefit from all charger features)
Smart software tracks and stores numerous smart battery data
Includes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapter to charge Spektrum Smart batteries
Large, 2.8" display screen
An on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Updated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttons
USB input and output ports are included for updating firmware and charging secondary devices
ON/OFF switch eliminates the need to plug in and unplug the power cord for on/off control
Detachable power cord makes transporting more convenient
Includes an efficient, low-noise cooling fan
Sleek, sturdy case fits well on a workbench and in pit or field bags
Handy rubber grips on case make it easier to plug in and remove batteries
IC3® and IC5® connectors are backwards compatible with EC3™ and EC5™ connectors
Battery
Simpler and safer to use
Balance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Thicker internal metal side plates protect cells and improve heat dissipation
Integrated microchip stores unique parameters for each battery
IC3® and IC5® connectors are also compatible with EC3™ and EC5™ styles
Specifications:
Charger
Normal/Standard Charge Rate: 0.1 - 20.0A
Product Width: 5.67" (144 mm)
Technology: Smart
Application: RC Model Battery Charger
Reverse Polarity Protection: Yes
Selectable Charge Rate: Yes
Software Updates: Yes
Hard Case: Yes
Over Current Protection: Yes
Integrated Balancing: Yes - Internal Balancer & Internal Adapter
Charge Protection Circuitry: Yes
Input Voltage: 100 - 240V AC
Maximum Continuous Discharge Rate: 1.5A
Output: 2 x 200W, or 380W on one channel
Battery Balance Connector: JST_XH
Maximum Charge Rate: 20A
Low Input Voltage Protection: Yes
PC Connectivity: Yes
Product Weight: 37.7oz (1070g)
Discharge: 0.1 - 1.5A
Number of Cells: 1 - 6S LiPo, LiIon, LiFe, 1-16 cell NiMH, NiCd, 1-12 cell Pb
Safety Timer: Yes
Short Circuit Protection: Yes
Amp Meter: Yes
Product Height: 4.13" (105 mm)
Product Length: 5.7" (145 mm)
Voltage Meter: Yes
Display: 2.8" LCD
Output Connector: IC3 and IC5 selectable
Peak Detection: Yes
Thermal Protection: Yes
Programmable: Yes
Battery Temperature Monitoring: Yes
Cooling Method: Fan
Battery:
Battery Type: LiPo (3.7V per cell)
Application: Surface
Number of Cells: 3
Maximum Burst Discharge Rate: 50C
Battery Capacity: 5000-5999mAh
Connector Type: IC5
Battery Voltage: 11.1V
Product Weight: 14.28oz (405g)
Product Width: 1.83" (46 mm)
Wire Gauge: 10 AWG
Product Length: 5.45" (138 mm)
Capacity: 5000mAh
Watt Hours: 55.5
Charge Protection Circuitry: Yes
Hard Case: Yes
Normal/Standard Charge Current: 5A
Battery Balance Connector: G2 Smart
Product Height: 1.37" (35 mm)
Normal/Standard Charge Rate: 5C
Includes:
(2) 3s 11.1V 50C 5000mAh LiPo Smart Batteries
(1) S2200 Smart G2 Charger
This product was added to our catalog on December 13, 2021
SPMXG2PS8, Spektrum RC Smart G2 PowerStage 8S Bundle w/Two 4S Smart LiPo Batteries (5000mAh)
This is a Spektrum RC Smart G2 PowerStage 8S Bundle with two 4S Smart G2 LiPo Hard Case Batteries is a one-box solution for vehicles requiring 8S power.
Spektrum Smart G2 Battery
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery are upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. The updated G2 performance batteries feature an all in one connector that eliminates the need for a balance connector, as the balance process is done through the charger and the battery connector. The smart batteries also come programmed from the factory to self discharge to a safe 3.90V per cell after 72hrs of inactivity. All of the functions and features placed in this battery are intended to supply the user with a powerful and safe lithium battery.
Spektrum Smart G2 Charger
The Spektrum S2200 Smart G2 AC Charger offers fast, easy charging, especially for modelers using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3 or IC5 output ports, and more.
Features:
Charger
Up to 200W power per channel or 380W on one channel for fast charging
Charges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead needed
Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected
Charges virtually any RC battery (use Smart batteries to benefit from all charger features)
Smart software tracks and stores numerous smart battery data
Includes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapter to charge Spektrum Smart batteries
Large, 2.8" display screen
An on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Updated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttons
USB input and output ports are included for updating firmware and charging secondary devices
ON/OFF switch eliminates the need to plug in and unplug the power cord for on/off control
Detachable power cord makes transporting more convenient
Includes an efficient, low-noise cooling fan
Sleek, sturdy case fits well on a workbench and in pit or field bags
Handy rubber grips on case make it easier to plug in and remove batteries
IC3® and IC5® connectors are backwards compatible with EC3™ and EC5™ connectors
Battery
Simpler and safer to use
Balance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Thicker internal metal side plates protect cells and improve heat dissipation
Integrated microchip stores unique parameters for each battery
IC3® and IC5® connectors are also compatible with EC3™ and EC5™ styles
Specifications:
Charger
Normal/Standard Charge Rate: 0.1 - 20.0A
Product Width: 5.67" (144 mm)
Technology: Smart
Application: RC Model Battery Charger
Reverse Polarity Protection: Yes
Selectable Charge Rate: Yes
Software Updates: Yes
Hard Case: Yes
Over Current Protection: Yes
Integrated Balancing: Yes - Internal Balancer & Internal Adapter
Charge Protection Circuitry: Yes
Input Voltage: 100 - 240V AC
Maximum Continuous Discharge Rate: 1.5A
Output: 2 x 200W, or 380W on one channel
Battery Balance Connector: JST_XH
Maximum Charge Rate: 20A
Low Input Voltage Protection: Yes
PC Connectivity: Yes
Product Weight: 37.7oz (1070g)
Discharge: 0.1 - 1.5A
Number of Cells: 1 - 6S LiPo, LiIon, LiFe, 1-16 cell NiMH, NiCd, 1-12 cell Pb
Safety Timer: Yes
Short Circuit Protection: Yes
Amp Meter: Yes
Product Height: 4.13" (105 mm)
Product Length: 5.7" (145 mm)
Voltage Meter: Yes
Display: 2.8" LCD
Output Connector: IC3 and IC5 selectable
Peak Detection: Yes
Thermal Protection: Yes
Programmable: Yes
Battery Temperature Monitoring: Yes
Cooling Method: Fan
Battery
Application: Surface
Battery Balance Connector: G2 Smart
Battery Capacity: 5000-5999mAh
Battery Type: LiPo (3.7V per cell)
Battery Voltage: 14.8V
Capacity: 5000mAh
Cell Configuration: Flat
Charge Protection Circuitry: Yes
Connector Type: IC5
Hard Case: Yes
Maximum Burst Discharge Rate: 100C
Maximum Charge Current: 5A
Maximum Charge Rate: 5C
Normal/Standard Charge Rate: 1C
Number of Cells: 3
Product Height: 1.37" (35 mm)
Product Length: 5.45" (138 mm)
Product Width: 1.8" (46 mm)
Watt Hours: 55.5
Wire Gauge: 10 AWG
Includes:
(1) S2200 G2 AC LiPo Smart Charger (SPMXC2010)
(2) 4S Smart G2 LiPo 100c Battery Pack (14.8V/5000mAh) (SPMX54S100H5)
This product was added to our catalog on November 22, 2021
Spektrum Smart PowerStage Bundle 4S, SPMXPS4
Overview
The Smart Technology Powerstage Bundle is a one-box solution for vehicles requiring top performance. Designed with the simplicity of Smart Technology, this bundle includes (2) 5000mAh 2S 50C Smart LiPo batteries, (1) S2100 Smart AC Charger and (2) charge adapters to charge your IC5 batteries on the S2100 charger.
SPEKTRUM SMART BATTERIES
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. Our Spektrum Smart 50C LiPos are ready to drop into your RC car or boat for better performance, power, and reliability. These battery packs are a great upgrade for those looking to get more punch and off the line power on nearly any setup.
Key Features:
Integrated microchip stores unique parameters for each battery.
Smart discharge allows batteries to automatically discharge to a safe voltage.
Save time and hassle, while improving battery life.
Powerful 50C continuous discharge rating to deliver high performance and longevity.
Impact resistant ABS plastic hardcase.
No soldering required, equipped with IC5 Connectors that are compatible IC5.
SPEKTRUM SMART CHARGER
The Spektrum™ S2100 Smart Charger is the first dual-output AC Smart Charger to feature Spektrum Smart Charging technology. Small and portable, this 200W charger features the Spektrum IC3™ connector that delivers a robust connection that also reads vital battery content that relays to a bright LCD color display to clearly show unique information and log data about your Smart Battery such as how many charge cycles the pack has, and much more.
Key Features:
High-visibility color LCD screen.
Simple touch-wheel interface.
Intelligent software makes charging simple.
Compact design with impressive output capacity.
High-speed processor delivers amazing performance.
Efficient, internal cooling system.
Backward compatible with non-Smart batteries.
CHARGE LEAD ADAPTERS
This Powerstage Bundle includes (2) IC3 Battery / IC5 Device charge lead adapters to charge the Smart IC5 batteries on the S2100 charger.
Manuals
Smart Charger G1 Interface Update and Instruction
Smart S2100 Dual Port AC Charger Manual - English
SPMXPS6, Spektrum Smart PowerStage Bundle 6S
Product Detail
In The Box
(2) Spektrum 5000mAh 3S 11.1V 50C Smart LiPo Battery Hardcase, IC5
(1) Spektrum S2100 AC Smart Charger, 2x100W
(2) Spektrum Adapter: IC3 Battery / IC5 Device, 4”/100mm Wire 10 AWG
Overview
The Smart Technology Powerstage Bundle is a one-box solution for vehicles requiring top performance. Designed with the simplicity of Smart Technology, this bundle includes (2) 5000mAh 3S 50C Smart LiPo batteries, (1) S2100 Smart AC Charger and (2) IC5 charge adapters to charge your IC5 batteries on the S2100 charger.
SPEKTRUM SMART BATTERIES
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. Our Spektrum Smart 50C LiPos are ready to drop into your RC car or boat for better performance, power, and reliability. These battery packs are a great upgrade for those looking to get more punch and off the line power on nearly any setup.
Key Features:
Integrated microchip stores unique parameters for each battery.
Smart discharge allows batteries to automatically discharge to a safe voltage.
Save time and hassle, while improving battery life.
Powerful 50C continuous discharge rating to deliver high performance and longevity.
Impact resistant ABS plastic hardcase.
No soldering required, equipped with IC5 Connectors that are compatible IC5.
SPEKTRUM SMART CHARGER
The Spektrum™ S2100 Smart Charger is the first dual-output AC Smart Charger to feature Spektrum Smart Charging technology. Small and portable, this 200W charger features the Spektrum IC3™ connector that delivers a robust connection that also reads vital battery content that relays to a bright LCD color display to clearly show unique information and log data about your Smart Battery such as how many charge cycles the pack has, and much more.
Key Features:
High-visibility color LCD screen.
Simple touch-wheel interface.
Intelligent software makes charging simple.
Compact design with impressive output capacity.
High-speed processor delivers amazing performance.
Efficient, internal cooling system.
Backward compatible with non-Smart batteries.
CHARGE LEAD ADAPTERS
This Powerstage Bundle includes (2) IC3 Battery / IC5 Device charge lead adapters to Smart charge your IC5 batteries on the S2100 charger.
Product Specifications
Application
Surface
Battery Balance Connector
JST/XH
Battery Capacity
5000-5999mAh
Battery Voltage
7.4V
Capacity
5000mAh
Charge Protection Circuitry
Yes
Connector Type
IC5
Discharge
Yes
Display
Backlit
Hard Case
Yes
Input Voltage
AC 100-240V
Integrated Balancing
Yes - Internal Balancer & External Adapter
Maximum Continuous Discharge Current
50C
Maximum Continuous Discharge Rate
50C
Number of Cells
2
Output Connector
IC3
Search Keywords
smartspmx_charger
Wire Gauge
12 AWG
SPMXPS8HC, Spektrum RC Smart PowerStage 8S Bundle w/Two 4S Smart LiPo Hard Case Batteries (5000mAh)
The Spektrum Smart PowerStage 8S Bundle is a one-box solution for large scale vehicles. Designed with the simplicity of Smart Technology, the bundle includes two 5000mAh 4S 100C Smart batteries, a S2100 Smart AC Charger and two charge adapters to make charging easy.
BATTERIES
You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. Our Spektrum Smart 100C LiPos are ready to drop into your RC car or boat for better performance, power, and reliability. These battery packs are a great upgrade for those looking to get more punch and off the line power on nearly any setup.
SPEKTRUM SMART CHARGER
The Spektrum™ S2100 Smart Charger is the first dual-output AC Smart Charger to feature Spektrum Smart Charging technology. Small and portable, this 200W charger features the Spektrum IC3™ connector that delivers a robust connection that also reads vital battery content that relays to a bright LCD color display to clearly show unique information and log data about your Smart Battery such as how many charge cycles the pack has, and much more.
CHARGE LEAD ADAPTERS
The Powerstage Bundle includes 2 IC3 Battery / IC5 Device charge lead adapters to make charging two batteries easier.
Features:
Charger:
High-visibility color LCD screen
Simple touch-wheel interface.
Intelligent software makes charging simple.
Compact design with impressive output capacity.
High-speed processor delivers amazing performance.
Efficient, internal cooling system.
Backward compatible with non-Smart batteries.
Battery:
Integrated microchip stores unique parameters for each battery.
Smart discharge allows batteries to automatically discharge to a safe voltage.
Save time and hassle, while improving battery life.
Powerful 100C continuous discharge rating to deliver high performance and longevity.
Impact resistant ABS plastic hardcase.
No soldering required, equipped with IC3 and IC5 Connectors that are compatible with EC3 and EC5.
Includes:
(2) 5000mAh 4S 100C Smart batteries
(1) S2100 Smart AC Charger
(2) Charge adapters
This product was added to our catalog on April 1, 2021
SPMXPSA200, Spektrum RC Smart G2 Powerstage Air Bundle w/3S Smart LiPo Battery (2200mAh)
This Spektrum RC Smart G2 PowerStage Air Bundle is a one box solution that includes one 3s LiPo 2200mAh battery, and charger to suite many aircraft requirements that need 3s LiPo power.
Spektrum Smart G2 Battery
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery are upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. The updated G2 performance batteries feature an all in one connector that eliminates the need for a balance connector, as the balance process is done through the charger and the battery connector. The smart batteries also come programmed from the factory to self discharge to a safe 3.90V per cell after 72hrs of inactivity. All of the functions and features placed in this battery are intended to supply the user with a powerful and safe lithium battery.
Spektrum Smart G2 S120 USB Charger
The Spektrum S120 USB-C Smart Charger features Spektrum Smart Charging technology in a small and simple to use platform. This 20W charger easily charges compatible Spektrum Smart batteries conveniently from almost any USB power source. When a Spektrum Smart battery is connected, the S120 immediately detects the battery information and automatically begins to charge. Spektrum Smart charging is designed to be safe, intuitive and convenient so you can simply look forward to putting your batteries back to action!
Charger Features:
Easily charges compatible smart batteries from convenient USB power (power supply not included)
Automatically detects smart battery information and begins charging when connected
Compatible with 2-3 cell Smart LiPo Batteries
Battery Features:
Simpler and safer to use
Pre-installed IC3 connector
Balance charge through the IC3 connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Thicker internal metal side plates protect cells and improve heat dissipation
Integrated microchip stores unique parameters for each battery
IC3 and IC5 connectors are also compatible with EC3 and EC5 styles
Specifications:
Charger:
Type: USB Charger
Input: 5-12VDC Via USB type C (power supply required)
Cells: 2-3 Cell LiPo, 6-7 cell NiMH
Charge Rate: 4.35V @ 2A (Not selectable)
Input Connector: USB
Output Connector: IC3
Battery Type: Only compatible with Spektrum SMART batteries
Dimensions: 2x2x0.55" (51x51x14mm)
Battery:
Battery Type: LiPo (3.7V per cell)
Battery Voltage: 11.1V
Charge Protection Circuitry: Yes
Connector Type: IC3
Programmable: Yes
Application: Airplanes, Helicopters
Battery Balance Connector: G2 Smart
Capacity: 2200mAh
Number of Cells: 3
Maximum Burst Discharge Rate: 30C
Normal/Standard Charge Rate: 1C
Technology: Smart
Includes:
(1) S120 USB-C Smart Charger 1x20W (SPMXC1020)
(1) 11.1V 2200mAh 3S 30C Smart G2 LiPo Battery with IC3 (SPMX223S30)
(1) USB Type C Cable
This product was added to our catalog on August 17, 2022
SPMXPSS300, Spektrum RC Smart G2 PowerStage 3S Bundle w/3S Smart LiPo Battery (5000mAh)
This is a Spektrum RC Smart G2 PowerStage 3S Bundle with a 3S Smart LiPo Hard Case Battery. The Smart Technology Powerstage Bundle is a one-box solution for vehicles requiring 3S performance. Designed with the simplicity of Smart Technology, this bundle includes one 5000mAh 3S 50C Smart G2 LiPo battery, and one S155 Smart AC Charger.
Spektrum Smart Battery:
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery are upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest. The updated G2 performance batteries feature an all in one connector that eliminates the need for a balance connector, as the balance process is done through the charger and the battery connector. The smart batteries also come programmed from the factory to self discharge to a safe 3.90V per cell after 72hrs of inactivity. All of the functions and features placed in this battery are intended to supply the user with a powerful and safe lithium battery.
Spektrum Smart Charger:
With the compact S155 AC Mini Smart Charger, modelers of all experience levels can enjoy the charging advantages of innovative Spektrum Smart technology. This charger comes compatible with 4S LiPo, LiFe, Li-Ion, or LiHV batteries as well as 1-12S NiMH and NiCd packs, equipped with a IC3 or IC5 connector. Generation 2 Smart technology enables the S155 to both charge and balance Smart G2 batteries using one simple connection. No separate balance lead is needed. When connected to a Smart battery, its Auto Charge feature recognizes the correct charging parameters instantly and begins safe, proper charging automatically.
Features:
Battery:
Powerful 50C continuous discharge rating to deliver high performance and longevity
Balance charge through the IC5 connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Integrated microchip stores unique parameters for each battery
IC5 connectors may be connected to a device with an EC5 connector
Charger:
Advanced, user-friendly Smart G2 charging technology that fits into any hobby budget
Delivers 55W of charging power
Includes selectable IC3 and IC5 charging ports — no separate adapters required
Charges up to 4S LiPo/LiFe/Li-Ion/LiHV batteries and 1-12S NiMH/NiCd packs
Color LCD screen interface features intuitive menus, icons, and navigation tools
Clock counts down remaining charge time until your Smart battery is fully charged and ready to use
Auto Charge recognizes Smart battery charging parameters and starts charging automatically when connected
USB input for updating firmware
Sleep mode
Detachable power cord
Sleek, sturdy case fits well on your workbench and in pit/field bag
Specifications:
Battery:
Connector Type: IC5
Battery Balance Connector: JST-XH
Capacity: 5000mAh
Voltage: 11.1V
Battery Type: LiPo (3.7V per cell)
Technology: Smart
Charge Rate: 5A - 1C
Cell Configuration: Stick
Dimensions: 5.45x1.83x1.37in (138x46x35mm) (LxWxH)
Hard Case: Yes
Wire Gauge: 12AWG
Charger:
Input Voltage: 100-240V, 50-60Hz
Cell Count: 2-4S
Battery Type: LiPo (3.7V per cell)
Maximum Charge Rate: 18.4V, 5A (Max)
Length: 4.4" (112 mm)
Width: 2.4" (61 mm)
Height: 2.4" (61 mm)
Weight: 12.2 oz (345 g)
Output Connector: IC3 and IC5 (Selectable)
Battery Balance Connector: JST_XH
Display: LCD
Includes:
(1) Spektrum 3S 5000mAh Smart G2 Battery
(1) Spektrum S155 Smart Charger
This product was added to our catalog on October 17, 2023
TRA2820X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/2200mAh)
This is the Traxxas 2S, 7.4V, 2200mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Mustang
Traxxas 1/16 Race Truck
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
Traxxas TRX-4
Traxxas TRX-4
Specifications:
Type: LiPo
Total Capacity: 2200
Voltage: 7.4
Continuous Discharge: 25C (55A)
Max Burst Rate: 50C (110A)
Watt Hours: 16.28
Max Charge Rate: 1C (2.2)
Dimensions: 88x21x30mm
Weight: 4.2oz (118g)
This product was added to our catalog on March 21, 2021
TRA2823X, Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/1400mAh)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 1400mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 1400
Voltage: 11.1
Continuous Discharge: 25C (35A)
Max Burst Rate: 50C (70A)
Watt Hours: 15.54
Max Charge Rate: 1C (2.8)
Dimensions: 88x20x35mm
Weight: 4.2oz (118g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
This product was added to our catalog on May 7, 2021
TRA2832X, Traxxas 3S "Power Cell" 25C LiPo Battery (11.1V/5000mAh) w/iD Connector
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 11.1V
C Rating: 25
Length: 135mm
Height: 28.5mm
Width: 44mm
Weight: 12.5oz
This product was added to our catalog on April 7, 2021
TRA2842X, Traxxas 2S "Power Cell" 25C Lipo Battery w/iD Traxxas Connector (7.4V/5000mAh)
This is a Traxxas 2S "Power Cell" 25C Lipo Battery with iD Traxxas Connector, a certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Traxxas delivers you more of what you want most: simple installation, a great price, and extended speed and run time.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 7.4 V
C Rating: 25
Length: 137mm
Height: 24mm
Width: 43mm
Weight: 9.9oz
This product was added to our catalog on April 12, 2021
TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh)
This is the Traxxas 2S, 7.4V, 5800mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 5800
Voltage: 7.4
Continuous Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Dimensions: 137x25x43mm
Weight: 10.9oz (308g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
This product was added to our catalog on May 7, 2021
TRA2849X, Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/4000mAh)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 4000mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 4000
Voltage: 11.1
Continuous Discharge: 25C (100A)
Max Burst Rate: 50C (200A)
Watt Hours: 44.40
Max Charge Rate: 2C (8A)
Dimensions: 135x26x43mm
Weight: 11.1oz (316g)
This product was added to our catalog on September 7, 2021
Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/6400mAh)
This is the Traxxas 3S, 11.1V, 6400mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 6400
Voltage: 11.1
Continuous Discharge: 25C (160A)
Max Burst Rate: 50C (320A)
Watt Hours: 71.04
Max Charge Rate: 2C (12.6)
Dimensions: 138x41x43mm
Weight: 17.7oz (502g)
This product was added to our catalog on April 21, 2021
TRA2869X, This is the Traxxas 2S, 7.4V, 7600mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 7600
Voltage: 7.4
Continuous Discharge: 25C (190A)
Max Burst Rate: 50C (380A)
Watt Hours: 56.24
Charge Rate: 1C (7.6A)
Max Charge Rate: 2C (15.2A)
Dimensions: 155x27x43mm
Weight: 13.8oz (390g)
This product was added to our catalog on September 7, 2021
TRA2872X, Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/5000mAh)
Traxxas 3S, 11.1V, 5000mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 5000
Voltage: 11.1
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 155x26x44mm
Weight: 13.3oz (376g)
Replacement part for these models:
TRX-6® Ultimate RC Hauler
Accessory part for these models:
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
DCB M41 Widebody
Drag Slash 1967 Chevrolet® C10 Truck
E-Revo® VXL Brushless
Hoss® 4X4 VXL
Maxx®
Rustler® 4X4 VXL
Rustler® VXL
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash VXL
Sledge®
Spartan®
Stampede® VXL
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Unlimited Desert Racer®
X-Maxx®
XO-1®
XRT™
This product was added to our catalog on April 7, 2021
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mm
Weight: 16.8g
This product was added to our catalog on April 7, 2021
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle.
Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
(L) 185mm x (W) 50mm x (H) 44mm
675 Grams (average)
Accessory part for these models:
Traxxas Maxx
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on April 7, 2021
TRA2938X, Adapter, Traxxas® iD® LiPo battery (adapts Traxxas iD batteries to separate balance ports)
This product was added to our catalog on September 7, 2021
TRA2968, Traxxas Lipo Cell Voltage Checker/Balancer
This Traxxas Lipo Cell Voltage Checker and Balancer connects to Traxxas LiPo batteries using the required Balance Lead Adapter (TRA2938X). Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.
This product was added to our catalog on September 7, 2021
TRA2968X, Traxxas iD Lipo Battery Voltage Cell Checker Balancer w/TRA2938X Lead Adapter
The Traxxas iD Lipo Battery Voltage Checker/Balancer gives Traxxas iD connector equipped batteries the tools they need to monitor individual cell voltage. Package includes TRA2938X adapter for Traxxas iD batteries, as well as adapters for 2S and 3S batteries.
This product was added to our catalog on May 7, 2021
TRA2970, Traxxas EZ-Peak Plus Multi-Chemistry Battery Charger w/Auto iD (3S/4A/40W)
This is the Traxxas EZ-Peak Plus Multi-Chemistry Battery Charger, with iD Auto Battery Identification. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards.
At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
Features:
Recognizes Traxxas iD batteries to automatically program and optimize charger settings
Charge progress indicator
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Legacy support for all Traxxas High-Current Connectors
Built-in balance ports for conventional LiPo batteries
Charges 5-8-cell NiMH batteries
Charges 2S and 3S LiPo batteries
Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (40W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 365g
Dimensions: 146 x 123 x 53mm
This product was added to our catalog on November 21, 2014
TRA2970-3S, Traxxas EZ-Peak 3S Single "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell Battery (5000mAh)
The 3s LiPo completer pack includes a 2872X 3-Cell 5000 mAh 11.1-volt LiPo battery and a 2970 EZ-Peak® 4-amp LiPo charger. Traxxas LiPo completer packs deliver the ease and simplicity of 1-button charging with the Traxxas iD® system. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in your iD-equipped battery and press Start. The EZ-Peak charger does all the work for you. Get back in the action quickly with the faster, easier, and safer way to charge your premium Traxxas Power Cell LiPo batteries.
TRA2970 Charger Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (40W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 365g
Dimensions: 146 x 123 x 53mm
TRA2872X Battery Specifications:
Type: LiPo
Total Capacity: 5000
Voltage: 11.1
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 155x26x44mm
Weight: 13.3oz (376g)
Includes:
(1) TRA2970: Battery Charger
(1) TRA2872X: 5000mAh 3S 25C LiPo Battery w/iD
This product was added to our catalog on April 12, 2021
TRA2972, Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger w/Auto iD (3S/8A/100W)
This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger. Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4 amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8 amp) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.
Traxxas' Most Powerful Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.
Features:
100-Watt output
Recognizes Traxxas iD batteries to automatically program and optimize charger settings
Charge a NiMH and LiPo at the same time
Charge progress indicator
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface
Audible alerts
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Legacy support for all Traxxas High-Current Connectors
Built-in balance ports for conventional LiPo batteries
Charges 5-8-cell NiMH batteries
Charges 2S and 3S LiPo batteries
Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 575g
Dimensions: 176x138x57mm
This product was added to our catalog on September 7, 2021
TRA2973, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W)
The EZ-Peak Live Dual iD Charger takes all the advanced features of the EZ-Peak Live and supercharges the power output to over 26 amps (200 watts)! The 4s capable multi-chemistry dual charger uses built-in Bluetooth to work seamlessly with the Traxxas EZ-Peak Live app for iOS and Android!
The EZ-Peak Live app gives you detailed information, remote monitoring, and advanced operating functions through the high-definition color interface on your mobile device. It’s the most powerful, most advanced charger in the popular EZ-Peak lineup. Get back in the action sooner with the new EZ-Peak Live Dual Charger!
Patent Pending iD Technology
Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.
MAXX Power
The MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun.
Charging Flexibility
The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device.
Technology
The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors.
Features:
200 Watt 26+ amp output
Recognizes iD-equipped batteries to optimize charger settings
MAXX Charge feature gets you back in the action quickly
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface with dual LED charge progress indicators
Supports Traxxas EZ-Peak Live Application
Audible alerts
Dual high-flow cooling fans
Advanced Mode for full manual control through EZ-Peak Live App
Legacy support for all Traxxas High-Current Connectors
Integrated dual balance ports for conventional LiPo batteries
Built-in 2-amp USB charger output port
Charges Dual 5-8-cell NiMH batteries
Charges Dual 2s, 3s, and 4s LiPo Batteries
Specifications:
AC Input: 100-240V, 50-60Hz, 2.35A
Charge Current Range: 1.0—26.0A+
Discharge Current Range: 750mAh
Current Drain for Balance Ports: 750mAh
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Dimensions: 204 x 174 x 68mm
Important Customer Note: Accessing some charger features requires a mobile device with Bluetooth capability (sold separately) and the Traxxas EZ-Peak Live Application.
This product was added to our catalog on April 7, 2021
TRA2981, Traxxas EZ-Peak Plus 4S Multi-Chemistry Battery Charger w/Auto iD (4S/8A/75W)
The Traxxas EZ-Peak Plus 4S Multi-Chemistry Battery Charger with Auto iD is the easiest and safest way to charge your Traxxas iD® batteries. Just plug a Traxxas iD-equipped battery into the EZ-Peak® Plus 4s and press Start - that’s all there is to it! Traxxas pioneered this exclusive iD technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the charger’s settings for the optimal charge. An LED progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. One-button Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. With up to 8 amps of charging power, the EZ-Peak Plus 4s is the fastest, easiest, and most convenient way to charge your Traxxas batteries.
Power and Convenience
The faster your batteries charge, the sooner you’re back out having fun. No one understands this better than Traxxas which is why the EZ-Peak Plus 4s is equipped with 8 full amps (75 watts) of charging power. The charger automatically detects the type of iD-equipped battery you are using and then configures the settings for the fastest charge possible. NiMH batteries charge faster than ever with 4 amps of charging power. LiPo batteries charge even faster with up to 8 full amps. A large 40mm cooling fan keeps the temperatures down inside the charger for powerful charging sessions. A balance port is built into the charger for older-style LiPo batteries with external balance leads. The EZ-Peak Plus 4s combines EZ-Peak power with the safety of Traxxas’ exclusive iD technology in one convenient and easy-to-use package.
Features:
75-Watt 8-amp high output
Easy to use interface with charge progress indicator and audible alerts
Automatically recognizes Traxxas iD® batteries for optimal charger settings
Optimized for faster LiPo balance charging
One-button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH Traxxas iD® Batteries
Charges 2S, 3S, and 4S LiPo Traxxas iD® Batteries
Charge Rates:
6-cell NiMH
1200-1800mAh: 2A
3000-4200mAh: 4A
4300-5000mAh: 5A
7-cell NiMH
3000-4200mAh: 4A
4300-5000mAh: 5A
8-cell NiMH
4300-5000mAh: 5A
2-cell LiPo, 7.4v
4000-10000mAh: 8A
3-cell LiPo, 11.1v
4500-8400mAh: 6.7A
4-cell LiPo, 14.8v
3400-6700mAh: 5A
Specifications:
AC Input: 100-240V, 50-60Hz, 1.2A
Charge Current Range: Up to 8A
Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Net Weight: 365g
Dimensions: 121 x 161 x 54 mm
This product was added to our catalog on April 20, 2021
TRA2990, Traxxas EZ-Peak 3S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell Batteries (5000mAh)
Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification and is a great solution if you need batteries and a charger for a Traxxas vehicle requiring two 3S LiPo batteries; such as the X-MAXX Monster Truck and X0-1 Supercar. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries for use.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.
Traxxas' Most Powerful Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.
TRA2972 Charger Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 575g
Dimensions: 176x138x57mm
TRA2872X Battery Specifications:
Type: LiPo
Total Capacity: 5000
Voltage: 11.1
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 155x26x44mm
Weight: 13.3oz (376g)
Includes:
(1) TRA2972: Dual iD Battery Charger
(2) TRA2872X: 5000mAh 3S 25C LiPo Battery w/iD
This product was added to our catalog on April 7, 2021
TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh)
This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need batteries and a charger for your Traxxas vehicle that runs either one or two 2S LiPo batteries. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries on hand for extended driving excitement.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.
Traxxas' Most Powerful Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.
TRA2972 Charger Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 575g
Dimensions: 176x138x57mm
TRA2869X Battery Specifications:
Type: LiPo
Total Capacity: 7600
Voltage: 7.4
Continuous Discharge: 25C (190A)
Max Burst Rate: 50C (380A)
Watt Hours: 56.24
Charge Rate: 1C (7.6A)
Max Charge Rate: 2C (15.2A)
Dimensions: 155x27x43mm
Weight: 13.8oz (390g)
Includes:
(1) TRA2972: Dual iD Battery Charger
(2) TRA2869X: 7600mAh 2S 25C LiPo Battery w/iD
COMPATIBILITY
Traxxas E-Revo
Traxxas E-Revo VXL 2.0
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Spartan
Traxxas Summit 1/10
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
This product was added to our catalog on September 7, 2021
TRA2992, Traxxas EZ-Peak 2S Single "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell Battery (5800mAh), (includes #TRA2970 iD® charger (1), #TRA2843X 5800mAh 7.4V 2-cell 25C LiPo battery (1))
This is the Traxxas EZ-Peak Multi-Chemistry Battery Charger System with an included "Power Cell" 5800mAh LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 2S LiPo battery.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
TRA2970 Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (40W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 365g
Dimensions: 146 x 123 x 53mm
TRA2843X Battery Specifications:
Type: LiPo
Total Capacity: 5800
Voltage: 7.4
Continuous Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Dimensions: 137x25x43mm
Weight: 10.9oz (308g)
Includes:
(1) TRA2970: Battery Charger
(1) TRA2843X: 5800mAh 2S 25C LiPo Battery w/iD
This product was added to our catalog on September 7, 2021
TRA2996X, Traxxas EZ-Peak Live 4S "Completer Pack" Battery Charger w/One Power Cell Battery (5000mAh)
This is the Traxxas EZ-Peak Live Multi-Chemistry Battery Charger System with an included "Power Cell" 5000mAh 4S LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 4S LiPo battery.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you.
The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time.
The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
Charger Specifications:
AC Input: 100–240 Volts, 50-60Hz, 1.5A
Charge Current Range: 1.0-12.0A
Discharge Current Range: 665mAh
Current Drain For Balance Ports: 665mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–4 Cells
Net Weight: 526g
Dimensions: 133 x 169 x 55mm
TRA2889X Battery Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mm
Weight: 16.8g
Includes:
(1) TRA2971 Battery Charger
(1) TRA2889X 5000mAh 4S 25C LiPo Battery w/iD
This product was added to our catalog on May 7, 2021
TRA2997, Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger w/Two Power Cell 4S Batteries (6700mAh)
This is a Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger that includes Two Power Cell 4S Batteries. The pack includes two 4-cell 6700mAh iD LiPo battery packs for 50+mph tire-scorching 30+volt power. Traxxas iD batteries are the easiest and safest LiPo charging solution when used with Traxxas exclusive iD chargers. You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time. The 4s capable EZ-Peak Live Dual multi chemistry charger comes equipped with built-in Bluetooth to work with the new EZ-Peak Live app for iOS and Android. The app gives you detailed information and advanced operation through a high-definition color interface. EZ-Peak Live Dual is the most powerful, versatile, and technologically advanced charger in the popular EZ-Peak iD lineup.
Charger Features:
200 Watt 26+ amp output
Recognizes iD-equipped batteries to optimize charger settings
MAXX Charge feature gets you back in the action quickly
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface with dual LED charge progress indicators
Supports Traxxas EZ-Peak Live Application
Audible alerts
Dual high-flow cooling fans
Advanced Mode for full manual control through EZ-Peak Live App
Legacy support for all Traxxas High-Current Connectors
Integrated dual balance ports for conventional LiPo batteries
Built-in 2-amp USB charger output port
Charges Dual 5-8-cell NiMH batteries
Charges Dual 2s, 3s, and 4s LiPo Batteries
Battery Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
Charger Specifications:
AC Input: 100-240V, 50-60Hz, 2.35A
Charge Current Range: 1.0—16.0A per channel (26.0A total maximum charge current)
Discharge Current Range: 750mAh
Current Drain for Balance Ports: 750mAh
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Dimensions: 204x174x68mm
Includes:
(1) TRA2973 EZ-Peak Live Dual iD charger
(2) TRA2890X 6700mAh 14.8V 4-cell 25C LiPo battery
This product was added to our catalog on April 12, 2021
TRA2998, Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell 4S Batteries (6700mAh)
Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger that includes One Power Cell 4S Battery. The pack includes one 4-cell 6700mAh iD LiPo battery. Traxxas iD batteries are the easiest and safest LiPo charging solution when used with Traxxas exclusive iD chargers. You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time.
Features:
Charger Features:
75-Watt 8-amp high output
Easy to use interface with charge progress indicator and audible alerts
Automatically recognizes Traxxas iD® batteries for optimal charger settings
Optimized for faster LiPo balance charging
One-button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH Traxxas iD® Batteries
Charges 2S, 3S, and 4S LiPo Traxxas iD® Batteries
Battery Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
Charger Specifications:
AC Input: 100-240V, 50-60Hz, 1.2A
Charge Current Range: Up to 8A
Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Net Weight: 365g
Dimensions: 121 x 161 x 54 mm
Includes:
(1) TRA2981 EZ-Peak Plus 4S Multi-Chemistry Battery Charger
(1) TRA2890X 6700mAh 14.8V 4-cell 25C LiPo battery
This product was added to our catalog on May 15, 2021
TRA6637, Traxxas LaTrax Alias LiPo Battery (3.7V/650mAh)
This is a replacement LaTrax 3.7V 650mAh 1C LiPo battery pack for use on the La Trax Alias quad-copter.
Specifications:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Thickness: 0.23" (6mm)
This product was added to our catalog on September 7, 2021
