CEGCKD0801, Pro RGB Light Conversion Kit for F450 Chasiss w/Pro Module
Pro RGB Light Conversion Kit for F450 Chassis w/Pro Module
CKD0801 KAOS RGB Light Conversion kit for F450 SD (F450 Chassis only w/ control Module)
This is Standard RGB kit for F450 SD
Including all the mounting wares
Include RGB MODULE which controls multi color changes
KYO97054-2R-B, Kyosho Fazer FZ02 2-LED Light Set (Red)
Kyosho Fazer FZ02 2-LED Light Set. This optional LED set features two red LED's on a factory assembled 400mm long wire harness. Add a custom touch to your ride with this red LED set.
This product was added to our catalog on March 19, 2024
KYO97054-4B, Kyosho Fazer FZ02 4-LED Light Set (Clear)
Fazer FZ02 4-LED Light Set. Package includes factory assembled wire string with four clear 5mm bulbs on a 40mm long wire.
This product was added to our catalog on June 29, 2021
KYO97054-4CR, Kyosho Fazer FZ02 LED Light Set (Clear/Red)
Kyosho Fazer FZ02 LED Light Set. This is an optional light set intended for the Kyosho Fazer FZ02 platform. Package includes one prewired light set consisting of two white (clear) lights and two red lights.
This product was added to our catalog on June 29, 2021
KYO97054-4R-B, Kyosho Fazer FZ02 4-LED Light Set (Red)
Kyosho Fazer FZ02 4-LED Light Set. This is an optional light kit intended for the Kyosho Fazer featuring red LEDs. Package includes one 4-LED light set.
This product was added to our catalog on June 29, 2021
TRA3690, Traxxas Slash/Stampede LED Light Bar
Traxxas Slash/Stampede LED Light Bar. This replacement light bar is intended for the Traxxas Slash or Stampede 2WD and 4WD models. Package includes one light bar with hardware.NOTE: This light bar must be paired with one of the following mounts.
Slash 2WD - TRA3635
Slash 4WD - TRA6835X
Stampede 2WD - TRA3635
Stampede 4WD - TRA6735
This product was added to our catalog on September 12, 2022
TRA3697, Traxxas Bigfoot No. 1 LED Light Kit w/Front & Rear Bumpers
Traxxas Bigfoot No. 1 LED Light Kit with Front and Rear Bumpers. These replacement bumpers are intended for the Traxxas Bigfoot No. 1 Monster Truck. Four LEDs are installed to the front bumper and two LEDs are installed to the rear bumper. The LEDs are factory installed and pre-wired for ease of use. Package includes one front bumper, one rear bumper, One Y-harness and hardware.
This product was added to our catalog on September 6, 2024
TRA6591, Traxxas Pro Scale Advanced Lighting Control System w/Power Module & Distribution
The Traxxas Pro Scale Advanced Lighting Control System w/Power Module & Distribution is a great way to add scale realistic lights to you TRX-4 or TRX-6. This kit will allow for running lights, low beams, high beams and more with this advanced light controller. When equipped with Traxxas Link this light system can be controller and fine tuned through your smartphone and the Traxxas App. Package includes one light controller, one power module, one mounting bracket, one motor wiring adapter, one tube of silicone grease, mounting hardware and zip-ties.
Features:
Running lights, Low beams and High beams
Distribution block for ease of setup
Smart activated brake lights allow for added realism
Hazard light mode to signal others of hazards
Crawler setting to prevent turn signals from activating while on the trail
Motor sensing reverse lights ensure that the reverse lights only come on while driving backwards
This product was added to our catalog on September 7, 2021
TRA6795, Traxxas Rustler 4x4 LED Light Set
The Traxxas Rustler 4x4 LED Light Set is an optional high-output off road LED light kit with a redesigned front bumper and roof skid. These pieces are made from a super tough composite material, and feature two forward facing bright-white LED light bars along with one rear light bar in red. The system is regulated by a chassis-mounted power supply for reliable lighting on all battery voltages. The Rustler 4X4 LED light kit keeps the fun going past sunset to add a new dimension to the Rustler 4X4 experience.
Features:
Efficient, high-intensity LED lighting
Front bumper with integrated LED lights
Roof skid with integrated front and rear light bars
Regulated power supply for stable lighting performance
Easy installation with included power tap connector
Includes:
(1) Front bumper with integrated LED light bar
(1) Roof skid with front and rear light bar
(1) Power Tap Connector
(1) 3V power supply
Misc. Hardware
This product was added to our catalog on May 7, 2021
TRA6796, Traxxas Rustler 4x4 Roof Skid Plate w/LED Lights
The Traxxas Rustler 4x4 Roof Skid Plate with LED Lights is an optional accessory that allows you to add LED lights to your Traxxas Rustler 4x4.NOTE: This roof skid requires the Traxxas Accessory Power Supply (TRA6588).
This product was added to our catalog on September 7, 2021
TRA6894, Traxxas Slash 4x4 LED Light Kit w/Front & Rear Bumpers
Traxxas Slash 4x4 LED Light Kit with Front and Rear Bumpers. These replacement bumpers is intended for the Traxxas Slash 4x4. Four LEDs are installed to the front bumper and two LEDs are installed to the rear bumper. The LEDs are factory installed and pre-wired for ease of use. Package includes one front bumper, one rear bumper, One Y-harness and hardware.
This product was added to our catalog on August 1, 2022
TRA7882, Traxxas Extension Harness, Led Lights (High-Voltage)
Replacement harness extension for the 7885 X-Maxx® LED light kit.
This product was added to our catalog on September 7, 2021
TRA7883, Traxxas Maxx/X-Maxx/XRT Rear LED Light Bar (Red/White)
Traxxas Maxx/X-Maxx Rear Led Light Bar. This optional 100mm wide light bar is intended for the rear of the Traxxas Maxx or X-Maxx body. Featuring red LED running lights and white LED reverse lights.
Package includes one light bar, one light bar mount and hardware.
This product was added to our catalog on September 7, 2021
TRA8035, Traxxas Led Light Set Trx-4 Bronco/F-150 1979
LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 body)
This product was added to our catalog on September 7, 2021
TRA8037, Traxxas LED Lights High/Low Switch (for #8035 or #8036 LED light kits)
High/low switch for 8035 and 8036 LED light kits.
This product was added to our catalog on May 7, 2021
TRA8038X, Traxxas TRX-4 1979 Chevrolet Blazer Pro Scale LED Light Set
Traxxas TRX-4 1979 Chevrolet Blazer Pro Scale LED Light Set. This optional LED light set is intended for the Traxxas TRX-4 when equipped with the 1979 Chevrolet Blazer body. Using this set will allow for headlights with low and high beams, turn signals with automatic cancellation, hazard lights and brake lights with reverse lamps. For maximum power and convenience, add the Traxxas Link and the optional Wireless Module (TRA6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes adding lights to your rig easy.
Features:
Headlights with high/low beam settings
Brake lights
Reverse lights
Turn signals with auto-cancellation
Hazard lights
Includes:
(1) Complete LED light Set
(1) Pro Scale Lighting Power Module and mount
(1) Pro Scale Lighting Distribution Block and mount
(1) Motor sensors wire harness
(1) Front and rear light harness
(1) MAXX Link cable
(1) Receiver communication cable
Installation hardware
This product was added to our catalog on February 21, 2023
TRA8936X, Traxxas Maxx LED Light Rear Bumper
The Traxxas Maxx LED Light Rear Bumper is an optional upgrade for the Traxxas Maxx monster truck. This bumper allows the use of the Traxxas TRA8990 LED light kit (not included).
This product was added to our catalog on September 7, 2021
TRA8990, Traxxas Maxx LED Light Kit
This is the Traxxas Maxx LED Light Kit, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. When Traxxas developed the Maxx they knew they would need to create a light kit capable of matching its rugged off-road capabilities. Built to handle brutal real-world punishment, this light kit is waterproof and built tough for maximum fun. The bright white LEDS will light up the night trails and keep you bashing when the sun goes down.
The included high voltage amplifier packs the muscle to efficiently power the high-power light bar, while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing.
Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-4s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (TRA6511) to control individual lights remotely and create custom lighting configurations.
Features:
Compatible with Velineon VXL-4s ESC
Fully functioning brake lights that work
in both forward and reverse direction
Fully waterproof
Three default lighting modes controlled from the power amplifier
Low and high beam brightness settings
Easy to install with simplified, concealed, color-coded wiring
Includes front and rear bumpers with LED cutouts
Firmware updatable through the app
App-controlled lighting functions:
Turn lights on/off remotely
Build a custom dashboard
Customize lighting configurations and actions
Add additional lighting components
Includes:
High-output front LED light bar
Multi-function rear LED light bar
Replacement bumpers with LED cutouts
High-voltage 8-channel power amplifier for intense, brilliant LED lighting
Regulated output for stable lighting performance
(no flickering or dimming as the battery voltage changes)
Mounting hardware
This product was added to our catalog on May 5, 2021
TRA9095, Traxxas Hoss LED Light Set w/Power Supply
Traxxas Hoss LED Light Set with Power Supply. This optional complete LED light kit allows you to add lights to the front and rear of your Traxxas Hoss. Package includes one complete LED light set, one power supply and hardware.
This product was added to our catalog on August 18, 2021
TRA9784, Traxxas TRX-4M Defender LED Complete Light Set
Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction.
This product was added to our catalog on November 8, 2022
TRA9842, Traxxas suspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assembled with hollow balls) (fits 1/18 scale vehicles with long wheelbase)
This product was added to our catalog on September 7, 2023
TRA9851, Traxxas Long Arm Lift Kit Trx-4M Complete
The TRX-4M™ Long Arm Lift Kit raises your TRX-4M's center ground clearance over 35% when combined with Mickey Thompson® Baja Pro XS® 2.4x1.0″ tires for more terrain-conquering ground clearance and an aggressive stance. The kit includes revised shock mounts and longer suspension links to maintain proper suspension and steering geometry. An extended trailer hitch also comes with the kit.
This product was added to our catalog on September 7, 2023
TRA9855, Traxxas Driveshafts, center, assembled (front & rear) (fits 1/18 scale vehicles with long wheelbase)
Traxxas Driveshafts Center Assembled F/R 1/18
This product was added to our catalog on September 7, 2023
TRA9863, Traxxas Wire Harness Led Lights (Fits TRA9862)
Add more scale detail to your TRX-4M™ by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.
This product was added to our catalog on November 2, 2023
TRA9883, Traxxas Pro Scale LED light set, complete (fits #TRA9811)
Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. Includes mounting hardware.
This product was added to our catalog on November 2, 2023
TRA9884, Traxxas Pro Scale LED Light Set, Front & Rear, Complete (includes light harness, zip ties (6)) (Fits TRA9812 Body)
Add scale lighting to your 1/18 scale TRX-4M Ford F-150 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. Includes mounting hardware.
This product was added to our catalog on December 19, 2023
YEA-LK-0002, Yeah Racing Dark Drifter 6-Slot LED Light Kit w/Lights
The Yeah Racing Dark Drifter 6-Slot LED Light Kit is an easy to use light kit that will bring your ride to life. The included controller features six inputs, four that are always on, and two that flash. The package also includes white, red, blue and yellow 5mm LED strings making this an all inclusive package. This system is a great for drifters and even crawlers as the flashing light ports and blue/yellow LEDs will allow you to configure the lights in a flashing KOH style setup.
Features:
Easy Installation
Flexible to switch connection to 7 different flashing modes and interchange of accessories
Maximum connection to 6 sets of LED lights (2 sets are flashing slots)
4 - solid on slots
2 - flashing slots
Input: 6V
Includes:
(1) Light Controller Box
(1) Blue LED Light Set (2 x 5mm Blue LED Bulb)
(1) Red LED Light Set (2 x 5mm Red LED Bulb)
(1) White LED Light set (2 x 5mm White LED Bulb)
(1) Yellow LED Light Set (2 x 5mm Yellow LED Bulb)
This product was added to our catalog on December 16, 2021
YEA-LK-0008WT, Yeah Racing 3mm LED Light Set (White)
Yeah Racing 3mm LED Light Set. These white LEDs are compatible with 3 Racing, Axial and Tamiya style light kits, but with a simple plug swap can be adapted to work with a variety of applications.Features:
Compatible with 3 Racing & Tamiya Light Kit
3mm LED diameter
White Color
500mm Wire Length
Includes one pre-wired dual LED light
JST 2.0 style 2-pin connector
This product was added to our catalog on December 16, 2021
YEA-LK-0034, Yeah Racing 2-Channel LED Light Kit w/Light Controller
Yeah Racing 2-Channel LED Light Kit with Light Controller. This optional light set features a sturdy yet light weight case, that is easy to install into any 1/10 chassis or body. The main benefit of this light controller is that the LED bulbs are interchangeable through the connector. Twenty bulbs are included to allow for you to get the most out of this light controller.
NOTE: Software is upgraded with fading effect, proportional brake
Specifications:
Size: 50x40x20mm
Includes:
(1) LED Light Controller
(10) LED Cables
(20) LED Bulbs
(2) Connector Cables
This product was added to our catalog on December 16, 2021
