BAC44429, Bachmann E-Z 18" Radius Curved Rerailer (2) (HO Scale)
This is a pack of two HO Scale Bachmann E-Z 18" Radius Curved Rerailers. The rerailer is designed to correct derailments that sometimes occur during normal railroad operations. Rerailers are installed after difficult sections of track (turnouts, crossings, “S” curves, etc.) where derailments may occur. Also available in the E-Z Track® system is an 18” Radius Curved Terminal Rerailer (Steel Alloy) if you need a rerailer and a power connection.Specifications:
Model: 44429
Scale: HO 1:87
This product was added to our catalog on December 7, 2021
BAC44440, Bachmann E-Z Track 30° Crossing (HO Scale)
This is a HO Scale Bachmann E-Z Track 30° Crossing. In addition to many other uses, the 30 Degree Crossing is the centerpiece of a basic “Figure 8” track configuration. To make a Figure 8, you also need 21 pieces of 18” Radius Curved Track (Steel Alloy) and 1 piece 18” Radius Curved Terminal Rerailer (Steel Alloy).Specifications:
Model: 44440
Scale: HO 1:87
This product was added to our catalog on February 20, 2021
BAC44441, Bachmann E-Z Track 90° Crossing (HO Scale)
This is a HO Scale Bachmann E-Z Track 90° Crossing. The 90 Degree Crossing has many useful applications in railroad design. However, if your goal is to make a “Figure 8” layout, you should start with a 30 Degree Crossing.Specifications:
Model: 44441
Scale: HO 1:87
This product was added to our catalog on November 29, 2021
BAC44462, Bachmann E-Z Track Remote Right Hand Switch (HO Scale)
This is a HO Scale Bachmann E-Z Track Remote Left Hand Switch. This is the basic turnout of the E-Z Track® system with a turnout radius matching 18” Radius Curved Track. If you have enough room, you may consider larger E-Z Track turnouts to allow for smoother transitions between tracks during switching operations, and to accommodate locomotives and rolling stock with longer wheel bases. Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation.
Specifications:
Model: 44462
Scale: HO 1:87
This product was added to our catalog on November 29, 2021
BAC44480, Bachmann E-Z Track 18" Radius Curved Black Roadbed (HO Scale)
This is a HO Scale Bachmann E-Z 18" Radius Curved Bulk, Steel alloy track with black roadbed.Specifications:
Model: 44480
Scale: HO 1:87
This product was added to our catalog on March 8, 2021
BAC44481, Bachmann E-Z Track 9" Straight Track Black Roadbed (HO Scale)
Bachmann 9" Steel EZ Straight Track, steel alloy track set on black roadbed.Specifications:
Model: 44481
Scale: HO 1/87
This product was added to our catalog on March 27, 2021
BAC44483, Bachmann E-Z 22" Radius Curved Track Black Roadbed (HO Scale)
HO Scale Bachmann E-Z 22" Radius Curved, Steel alloy track with black roadbed.Specifications:
Model: 44483
Scale: HO 1:87
This product was added to our catalog on March 15, 2021
BAC44487, Bachmann E-Z Track Figure 8 (HO Scale)
This is a HO Scale Bachmann E-Z Track Figure 8.
Specifications:
Model: 44487
Scale: HO 1:87
This product was added to our catalog on June 19, 2021
BAC44580, Bachmann E-Z Track 18" Radius Curve Gray Roadbed (HO Scale)
This is a pack of fifty HO Scale Bachmann E-Z 18" Radius Curve Bulk. Nickel silver track with gray roadbed.Specifications:
Model: 44580
Scale: HO 1:87
This product was added to our catalog on March 8, 2021
BAC44581, Bachmann E-Z Track 9" Straight Gray Roadbed (HO Scale)
HO Scale Bachmann E-Z 9" Straight. Nickel silver track with gray roadbed.Specifications:
Model: 44581
Scale: HO 1:87
This product was added to our catalog on March 8, 2021
Bettendorf 50-Ton Fully Sprung Metal Trucks -- Code 110 (.110") 33" Smooth-Back RP-25 Wheels 1 Pair
Kadee Quality Products#500
Product Information
Metal fully sprung equalized trucks. Mounts with a #2 or 2-56 screw (sold separately). The Bettendorf double truss truck was introduced in the 1930s by U.S. railroads and was allowed to be used in interchange service through 1993. Kadee's #500, #502 & #550 represent 50-ton trucks for 100,000-pound cars Truck Features: * Code 110 (.110) 33h smooth back wheels * Accurate markings * Incredible detail true to prototype * Non-magnetic metal wheels * Highly flexible sprung trucks * Metal side frames and fully sprung bolster * Smooth tracking free rolling contoured insulated axles * RP-25 free rolling wheels
Product: GATC 4180 Airslide Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton N-11 Roller Bearing
Wheels: CNC-Machined 36″ Wheels
BNSF “Buffer Car” #3 is BNSF road number #808003. This one is a special one – there are a small few “bandits” in the buffer car pool and this car is one of them. It represents a former ATSF 4180 that has been changed from revenue service to buffer car service, but was not repainted, so it retains its original ATSF “Santa Fe” class GA-200 paint from 1978, but with patched reporting marks and number. Like the prototype, it also includes conspicuity stripes. It includes tons of fine stencil lettering, just like the lettering found on the real car, such as “BUFFER SERVICE ONLY DO NOT LOAD.” This is the third of four BNSF buffer car service road numbers available for BNSF, correctly detailed for the 1970s-built prototype this car represents. And don’t forget, crude oil and ethanol trains requiring buffer cars typically have one car on each end of the train! We offer four completely different buffer car models since no two are the same!
Bowser Foam Work Cradles are made of shaped foam to give you a gentle helping hand when working on the underside of your locos and cars. The cradles also have a compartment for holding small parts like screws, trucks, couplers etc. Foam cradles are perfect for helping you keep your locomotives and rolling stock firmly in place and small parts organized on your workbench
Shaped foam cradle gives you a gentle helping hand when working on the underside of your locos and cars. Cradle also has a compartment for holding small parts like screws, trucks, couplers etc.
Cascadia Sleeper-Cab Tractor with 53' Dry Van Trailer - Assembled -- Exchange ("Join the Exchange Family" Slogan; white, red, blue)
Product Information
This fully assembled HO Scale Cascadia Sleeper-Cab Tractor with with 53' Dry Van Trailer from Trucks n Stuff is perfect for your modern-era highway scenes or as part of your vehicle or military commemorative collection. The tractor is patterned after a widely used Cascadia tractor and features a detailed die cast body with injection-molded details. The with 53' Dry Van Trailer features a detailed plastic body with factory-applied details and realistic decoration. Both models are assembled and ready for your layout scenes. The Cascadia Sleeper-Cab Tractor with with 53' Dry Van Trailer is part of the line of Trucks n Stuff HO Scale vehicles.
734-30110
CCS1065-03, Centralia Car Shops CA-4 Caboose Union Pacific (UP) 25117 - "Put it Here - We'll get it There" - HO Scale
Features:
Finely Molded Parts
wire and etched metal parts
metal wheelsets
metal knuckle couplers.
Cars are not illuminated.
Note: Photo might not show actual road number or slogan. Please see details for the road number.
This product was added to our catalog on March 31, 2023
CCS1066-17, Centralia Car Shops CA-3 Caboose Union Pacific (UP) 3737- Early - HO Scale
Features:
Finely Molded Parts
wire and etched metal parts
metal wheelsets
metal knuckle couplers.
Cars are not illuminated.
Note: Photo might not show actual road number. Please see details for the road number.
This product was added to our catalog on March 31, 2023
CCS1067-17, Centralia Car Shops HO CA-3 Caboose, Union Pacific (Late)
Ready-to-Run
Laser Sharp Painting and Printing
Etched Metal Roofwalk
Formed Brass Wire Details
Metal Knuckle Couplers
This product was added to our catalog on March 31, 2023
CCS1068-03, Centralia Car Shops CA-4 Caboose Union Pacific (UP) 3859 - "Drive With Care Everywhere" - HO Scale
Features:
Finely Molded Parts
wire and etched metal parts
metal wheelsets
metal knuckle couplers.
Cars are not illuminated.
This product was added to our catalog on March 31, 2023
CCS1073-01, Centralia Car Shops HO 1073-01 CA-4 Caboose, Union Pacific (MOW Green) "We're A Great Big Rolling Railroad"
Ready-to-RunLaser Sharp Painting and PrintingEtched Metal RoofwalkFormed Brass Wire DetailsMetal Knuckle Couplers
This product was added to our catalog on March 31, 2023
CCS1074-04, Centralia Car Shops CA-4 Caboose Union Pacific - HO Scale
Features:
Finely Molded Parts
wire and etched metal parts
metal wheelsets
metal knuckle couplers.
Cars are not illuminated.
This product was added to our catalog on March 31, 2023
