Products
Futaba 01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition)
01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition) The Futaba 10PX USLE, featuring a limited edition serial number, 3D carbon handle, and a magnesium steering housing, stands as the ultimate remote control transmitter for precision and performance. At its core, you'll find an impressive full-color TFT Liquid Crystal Touch screen LCD, generously sized at 4.3 inches, making it ideal for both indoor and outdoor use. Thanks to its transflective technology, it guarantees crystal-clear visibility in any lighting condition. In addition to its remarkable display, the Futaba 10PX offers exceptional functionality with its 10 channels, driven by the lightning-fast F-4G system, delivering unbeatable telemetry responsiveness. If you require even greater versatility, the S.BUS2 system enables the simultaneous operation of up to 10 channels. Moreover, you have the option to personalize your experience using the T-FHSS MINIZ system, providing you with the flexibility to fine-tune your setup through the Kyosho Mini-Z Evo dedicated receiver. Besides these state-of-the-art attributes, the 10PX boasts a plethora of features, including brake and steering mixing for larger vehicles, 4WS mixing for crawlers, and gyro sensitivity adjustments. Its compatibility with LiPo batteries, ability to receive firmware updates via a microSD card, and customizable button configuration make it an empowering choice for taking command like never before. Elevate your RC experience with the 10PX – it's the ultimate tool for dedicated enthusiasts. Features: Full color TFT Liquid Crystal Touch USLE Trim Level with magnesium steering bracket and Limited Edition serial number Includes high-quality carrying case F-4G system & telemetry Up to 10 channels can be operated by using the S.BUS2 system By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately) Software can be updated via microSD card (Sold Separately) 40 model memory with allowance for 15 character names Brake mixing for large cars Steering mixing is independent allowing for precise left and right steering servo settings 4WS mixing for crawlers Dual ESCs mixing allows for two ESCs to be controlled independently The sensitivity of Futaba car gyros can be adjusted from the T10PX Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo CPS LED light mixing Tank mixing Compatible with 6.6V LiFe and 7.4V LiPo Batteries Specifications: Frequency: 2.4GHz @ 100mW Protocols: T-FHSS-SR/T-FHSS/S-FHSS Voltages: 6.6V LiFe/7.4V LiPo Current Drain: 350mA or Less Antenna Type: 1/2 Dipole Display: 4.3in TFT Liquid Crystal Touch Includes: (1) 10PX USLE Transmitter with limited edition number plate (1) Limited edition carrying case with badge (1) 3D Carbon fiber handle Magnesium steering housing (3) Limited edition gray grips (1) Dry Battery Holder 32° and 5° Wheel offset adapters (1) Large and small diameter steering wheel Multi tension spring kit (2) Trigger guards (1) Rubber Grip (1) Hex wrench (1) Short manual This product was added to our catalog on November 25, 2023
$1,049.99
KYOSHO FSY-FS-RM005, Flysky RM005 Mini-Z FHSS Transmitter Module
FSY-FS-RM005, Flysky RM005 Mini-Z FHSS Transmitter Module Module Overview: FlySky RM005 Module. This optional module is designed for the Noble NB4 Transmitter. Using this will allow you to control the Mini-Z EVO receiver with the Noble NB4 transmitter. This module is ideal for racing or drivers seeking to get rid of any latency found in the stock setup. Features: allows seamless integration with Mini-Z chassis Decreases latency over the stock transmitter Utilizes the FHSS protocol Specifications: Input Voltage: 3.3V Frequency: 2.4GHz Channels: 4Ch Protocol: FHSS (Mini-Z) Antenna: Single Dimensions: 0.66x1.1x0.6in (34x18x5.2mm) Weight: 0.08oz (2.3g) Includes: (1) RM005 Mini-Z FHSS Transmitter Module This product was added to our catalog on November 25, 2024
$44.99
Futaba FUT01004353-3, Futaba 3PV 3-Channel 2.4GHz FHSS/S-FHSS Radio System w/R203GF Receiver
FUT01004353-3, Futaba 3PV 3-Channel 2.4GHz FHSS/S-FHSS Radio System w/R203GF Receiver The Futaba 3PV Radio System is sophisticated, powerful and easy to use. Pick up the 3PV and instantly feel how lightweight it is. Once you access the programming menu on the easy-to-read screen, you will instantly recognize how sophisticated the programming is. But the real experience happens when you get to take advantage of the 3PV's super-fast response rate. This is a system that can make a difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. This version of the 3PV with high-voltage R203GF receiver (FUTK3201) is perfect for brushless ESCs and digital servos. But the 3PV is also available with the R304SB telemetry receiver (FUTK3200) for those that want to keep an eye on their receiver voltage. Features: FHSS/S-FHSS/T-FHSS* protocols 10-model memory Model Reset Model Name (4-Character) Low Battery Alarm Link Mode (T-FHSS only) DT3 Selection SW1 Steering Trim Throttle Trim Channel 4 Trim Sub Trim Steering Dual Rates Steering End Point Adjustment spacer Throttle End Point Adjustment Channel 3 End Point Adjustment Channel 4 End Point Adjustment 4WS/Brake Mixing Steering Servo Reversing Throttle Servo Reversing Channel 3 Servo Reversing Channel 4 Servo Reversing Steering Exponential Throttle Exponential Throttle Fail Safe ABS Function Model Data Copy Auto Power-Off after 10 minutes *NOTE: T-FHSS available only with R304SB receiver.Specifications: 3PV Transmitter: Type: 3-Channel FHSS/S-FHSS/T-FHSS* Includes: 3-Channel R203GF Receiver Requires: (4) "AA" alkaline batteries, or 6.6V 1900mAh LiFe battery (HCAM6521), or 6V NiMH Battery (FUTM1482) R203GF Receiver: Type: 3-Channel FHSS/S-FHSS Input Power: 4.8V-7.4V Dimensions: 1.37 x 0.9 x 0.33 in (33 x 23 x 8.5 mm) Weight: 0.21 oz (6 g) This product was added to our catalog on July 14, 2021
$179.99
Futaba FUT01004388-3, Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R304SB Receiver
FUT01004388-3, Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R304SB ReceiverThis product was added to our catalog on December 16, 2021
$269.99
Futaba FUT01004396-3, Futaba 7PXR 7-Channel 2.4GHz T-FHSS Telemetry Radio System w/R334SBS-E
FUT01004396-3, Futaba 7PXR 7-Channel 2.4GHz T-FHSS Telemetry Radio System w/R334SBS-E The Futaba 7PXR 2.4GHz 7-Channel T-FHSS radio system is the redesigned apex radio for Futaba and features a number of upgrades over the original 7PX. The 7PXR was designed to be lightweight and easy to use with a significantly improved menu system. This 7-Channel telemetry capable T-FHSS radio system delivers features you won't find in another radio systems. The innovations start with the T-FHSS SR Super Response protocol, and continue with full telemetry capability, a back-lit 4.3" LCD touch screen and a updated R334SBS-E Diversity Receiver. NOTE: R334SBS-E receiver is recommended for electric models only and is not compatible with gas powered models. Gas powered models should use the R334SBS receiver (FUTL7688 - included with FUT01004395-3). SR mode servos must be used when using T-FHSS SR mode. Use of normal servos may cause servo trouble. Features: T-FHSS Super Response transmission system (Frame Rate of 2.45 msec) Compatible with T-FHSS, S-FHSS and FASST systems 4.3" color LCD touch screen display Telemetry capable 40 memory slots to save the configurations of your models 5 mix programs S.Bus servo programming system 7 channels with epa adjustment, sub-trim, brake mixing and ABS 4WS mixing Brake mixing Gyro mixing Steering mixing Memory with lap times Adjustable steering wheel and gas trigger Micro SD card slot Voice messages Headphone jack Suitable for left-handed people Specifications: Transmitter: Transmitting Frequencies: 2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP Protocols: T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 Power Requirement: Ni-MH – NT5F1800B (6 V)/LiFe – FT2F1700BV2 (6.6 V) Current Drain: 350 mA or less (When the T-FHSS, Vibration off, back lighting on) Transmitting Antenna: 1/2 dipole Display: 4.3 Inch Backlighted Color TFT Liquid Crystal Touch Panel (NOTE: When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.) Receiver: Size: 33.9x22.3x11.3mm (1.33x0.88x0.44") Weight: 7.2 g (0.25 oz) Operating Voltage: DC 3.7V-7.4V Application: Electric models only Includes: T7PXR Transmitter R334SBS-E Receiver Dry Battery Holder Wheel Offset Adapter Wheel Adapter 32deg Large Diameter Steering Wheel (54mm) Trigger Brake Lever (Narrow Type) Miniature Screwdriver Screen Protector (3) Receiver Plugs This product was added to our catalog on April 16, 2021
$699.99
Futaba FUT01004397-3, Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System (No Receiver)
FUT01004397-3, Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System (No Receiver)This product was added to our catalog on December 16, 2021
$249.99
Futaba FUT01004408-1, 10PXR404SBS, Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System w/R404SBS Receiver
FUT01004408-1, 10PXR404SBS, Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System w/R404SBS Receiver Futaba 10PX 10-Channel Touch Screen Radio System The Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System is a digital proportional RC system that features a super response rate. This transmitter features the F-4G telemetry with a faster response than the T-FHSS SR system. Made for the serious racer, this radio allows for many fine tuned adjustments including gyro mixing, throttle speed, steering speed, dual rate and more! These features and functions give you the needed adjustments for refined performance. This combo includes the Futaba R404SBS receiver for out of the box performance. The large 4.3" is produced in full color and features a backlit LCD touch screen. The screen is transflective, allowing for excellent indoor and outdoor visibility. For extreme comfortability, the steering wheel may be angled and adjusted. This gives the user the ability to fine tune the fitment of the radio to best suite their driving style. For adaptability, the steering wheel may also be moved to a left-handed position. The switch layout offers precise control over the assigned channel/function. NOTE: When the 10PX is powered on, bright dots may appear on the display. The display contains an extremely large number of Thin-Film-Transistors (TFT) and is manufactured using high-precision technology. Any bright dots that may appear on the display are intrinsic of the TFT manufacturing. Features: Full color touch screen LCD F-4G system & telemetry Up to 10 channels can be operated by using the S.BUS2 system By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately) Software can be updated via microSD card (Sold Separately) 40 model memory with allowance for 15 character names Allows for the use of an optional LiPo Brake mixing for large cars Steering mixing is independent allowing for precise left and right steering servo settings 4WS mixing for crawlers Dual ESCs mixing allows for two ESCs to be controlled independently The sensitivity of Futaba car gyros can be adjusted from the T10PX Tank mixing CPS LED light mixing Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo Specifications: Transmitter: Frequencies: 2.4GHz band @ 100mW Protocols: T-FHSS-SR/T-FHSS/S-FHSS/F-4G Voltage: LiPo: 7.4 V LiFe: 6.6 V Current Drain: 350 mA or less (When the T-FHSS, Vibration off, back lighting on) Antenna: 1/2 dipole R404SBS Receiver: Size: 1.00×0.81×0.42in (25.5×20.7×10.6mm) Weight: 5.7g (0.2oz) Voltage: 3.7-7.4V DC Includes: (1) T10PX Transmitter (1) R404SBS Receiver (1) Dry Battery Holder (2) Wheel offset adapters (1) 32° Wheel adapter (1) 5° Wheel Angle spacer (1) Large diameter steering wheel (2) Trigger guards (1) Rubber Grip (1) Hex wrench (1) Short manual This product was added to our catalog on June 19, 2022
$799.99
Futaba FUT01004409-1, Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System w/R404SBS-E Receiver
FUT01004409-1, Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System w/R404SBS-E Receiver The Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System is a digital proportional RC system that features a super response rate. This transmitter features the F-4G telemetry with a faster response than the T-FHSS SR system. Made for the serious racer, this radio allows for many fine tuned adjustments including gyro mixing, throttle speed, steering speed, dual rate and more! These features and functions give you the needed adjustments for refined performance. This combo includes the Futaba R404SBS-E receiver for out of the box performance. The large 4.3" is produced in full color and features a backlit LCD touch screen. The screen is transflective, allowing for excellent indoor and outdoor visibility. For extreme comfortability, the steering wheel may be angled and adjusted. This gives the user the ability to fine tune the fitment of the radio to best suite their driving style. For adaptability, the steering wheel may also be moved to a left-handed position. The switch layout offers precise control over the assigned channel/function. NOTE: When the 10PX is powered on, bright dots may appear on the display. The display contains an extremely large number of Thin-Film-Transistors (TFT) and is manufactured using high-precision technology. Any bright dots that may appear on the display are intrinsic of the TFT manufacturing. Features: Full color touch screen LCD F-4G system & telemetry Up to 10 channels can be operated by using the S.BUS2 system By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately) Software can be updated via microSD card (Sold Separately) 40 model memory with allowance for 15 character names Allows for the use of an optional LiPo Brake mixing for large cars Steering mixing is independent allowing for precise left and right steering servo settings 4WS mixing for crawlers Dual ESCs mixing allows for two ESCs to be controlled independently The sensitivity of Futaba car gyros can be adjusted from the T10PX Tank mixing CPS LED light mixing Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo Specifications: Transmitter: Frequencies: 2.4GHz band @ 100mW Protocols: T-FHSS-SR/T-FHSS/S-FHSS/F-4G Voltage: LiPo: 7.4 V LiFe: 6.6 V Current Drain: 350 mA or less (When the T-FHSS, Vibration off, back lighting on) Antenna: 1/2 dipole R404SBS-E Receiver: Size: 1.00×0.81×0.42in (25.5×20.7×10.6mm) Weight: 7.2g (0.25oz) Voltage: 3.7-7.4V DC Includes: (1) T10PX Transmitter (1) R404SBS-E Receiver (1) Dry Battery Holder (2) Wheel offset adapters (1) 32° Wheel adapter (1) 5° Wheel Angle spacer (1) Large diameter steering wheel (2) Trigger guards (1) Rubber Grip (1) Hex wrench (1) Short manual This product was added to our catalog on April 6, 2022
$799.99
Futaba FUT01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition)
FUT01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition) 10PX USLE Overview: The Futaba 10PX USLE, featuring a limited edition serial number, 3D carbon handle, and a magnesium steering housing, stands as the ultimate remote control transmitter for precision and performance. At its core, you'll find an impressive full-color TFT Liquid Crystal Touch screen LCD, generously sized at 4.3 inches, making it ideal for both indoor and outdoor use. Thanks to its transflective technology, it guarantees crystal-clear visibility in any lighting condition. In addition to its remarkable display, the Futaba 10PX offers exceptional functionality with its 10 channels, driven by the lightning-fast F-4G system, delivering unbeatable telemetry responsiveness. If you require even greater versatility, the S.BUS2 system enables the simultaneous operation of up to 10 channels. Moreover, you have the option to personalize your experience using the T-FHSS MINIZ system, providing you with the flexibility to fine-tune your setup through the Kyosho Mini-Z Evo dedicated receiver. Besides these state-of-the-art attributes, the 10PX boasts a plethora of features, including brake and steering mixing for larger vehicles, 4WS mixing for crawlers, and gyro sensitivity adjustments. Its compatibility with LiPo batteries, ability to receive firmware updates via a microSD card, and customizable button configuration make it an empowering choice for taking command like never before. Elevate your RC experience with the 10PX – it's the ultimate tool for dedicated enthusiasts. Features: Full color TFT Liquid Crystal Touch USLE Trim Level with magnesium steering bracket and Limited Edition serial number Includes high-quality carrying case F-4G system & telemetry Up to 10 channels can be operated by using the S.BUS2 system By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately) Software can be updated via microSD card (Sold Separately) 40 model memory with allowance for 15 character names Brake mixing for large cars Steering mixing is independent allowing for precise left and right steering servo settings 4WS mixing for crawlers Dual ESCs mixing allows for two ESCs to be controlled independently The sensitivity of Futaba car gyros can be adjusted from the T10PX Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo CPS LED light mixing Tank mixing Compatible with 6.6V LiFe and 7.4V LiPo Batteries Specifications: Frequency: 2.4GHz @ 100mW Protocols: T-FHSS-SR/T-FHSS/S-FHSS Voltages: 6.6V LiFe/7.4V LiPo Current Drain: 350mA or Less Antenna Type: 1/2 Dipole Display: 4.3in TFT Liquid Crystal Touch Includes: (1) 10PX USLE Transmitter with limited edition number plate (1) Limited edition carrying case with badge (1) 3D Carbon fiber handle Magnesium steering housing (3) Limited edition gray grips (1) Dry Battery Holder 32° and 5° Wheel offset adapters (1) Large and small diameter steering wheel Multi tension spring kit (2) Trigger guards (1) Rubber Grip (1) Hex wrench (1) Short manual This product was added to our catalog on December 9, 2024
$1,049.99
Futaba FUT01102170-1, Futaba S9650 Servo Digital Mini
FUT01102170-1, Futaba S9650 Servo Digital Mini This is the Futaba S9650 Digital Mini Servo with two ball bearings for helicopter and airplane use and comes with "J" connector pre-installed. Precision fixed-wing and helicopter flying requires precise, high-tech servos, and we are answering the call with new digital servos that reach full power immediately. They feature high-capacity, high-current wire for low resistance while maintaining standard servo dimensions and light weight so you can mount them almost anywhere. Specifications: Speed: .14 sec/60 degrees @ 4.8V - .11 Sec/60 Degrees @ 6.0V Torque: 50.0 oz-in @ 4.8V - 62.5 oz-in @ 6.0V Weight: 0.9 oz (26grams) Length: 1.4" (35.6mm) Width: 0.6" (15.2mm) Height: 1.1" (27.9mm) This product was added to our catalog on May 3, 2023
$69.99
Futaba FUT01102179-3, Futaba R304SB T-FHSS 4-Channel Telemetry Enabled 2.4GHz Receiver
FUT01102179-3, Futaba R304SB T-FHSS 4-Channel Telemetry Enabled 2.4GHz ReceiverThis product was added to our catalog on December 16, 2021
$69.99
Futaba FUT01102202-3, Futaba R204GF-E S-FHSS High Voltage 4-Channel 2.4GHz Micro Receiver
FUT01102202-3, Futaba R204GF-E S-FHSS High Voltage 4-Channel 2.4GHz Micro ReceiverThis product was added to our catalog on December 16, 2021
$59.99
Futaba FUT01102237-3, Futaba R203GF S-FHSS 3-Channel 2.4GHz Receiver
FUT01102237-3, Futaba R203GF S-FHSS 3-Channel 2.4GHz Receiver The Futaba R203GF 3-Channel 2.4GHz S-FHSS Receiver is compatible with Futaba FHSS and S-FHSS transmitters. Futaba S-FHSS 2.4GHz receivers benefit from Futaba's patented Pre-Vision™ circuitry, which scans incoming data and corrects errors before they can become problems. They sync perfectly with Continuous Channel Shifting, handling hundreds of frequency changes per second with flawless precision. Plus, they all offer the Easy-Link™ advantage — the feature that allows the receiver to “learn” the transmitter module’s unique code with the push of a button and establish a unique, unbreakable bond between the two.Frequency Hopping Spread Spectrum (FHSS) technology minimizes interference from other 2.4GHz systems. Easy Link prevents unwanted signal conflicts by using a special, pre-assigned ID code. High-voltage operation.NOTE: This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.Features: S-FHSS/FHSS auto detection Compatible with Futaba S-FHSS/FHSS protocol Normal and high-speed mode: Normal mode has a frame rate output of 13.63ms and accepts any type of servos or peripherals High-speed mode, with an output of 6.8ms, accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs Specifications: Dimensions: 26x39x10mm (1x1.5x0.4") Weight: 0.28oz (8g) Operating Voltage: 4.8 to 7.4V | Number of Ports: 4 PWM Output: 3 SBUS Ports: 0 SBUS2 Ports: 0 FASST: No Telemetry: no S-FHSS: Yes High Speed: Yes High Voltage: Yes Connector: J (STND) Range: Full Range NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems. This product was added to our catalog on June 20, 2021
$49.99
Futaba FUT01102246-3, Futaba R334SBS TFHSS SR S.Bus2 HV 4-Channel 2.4GHz Receiver
FUT01102246-3, Futaba R334SBS TFHSS SR S.Bus2 HV 4-Channel 2.4GHz ReceiverThis product was added to our catalog on December 16, 2021
$99.99
Futaba FUTUBA0140, Futaba LiFe Transmitter Battery (4PX) (6.6V/1700mAh)
FUTUBA0140, Futaba LiFe Transmitter Battery (4PX) (6.6V/1700mAh) This is an optional Futaba LiFe Batter (FT2F1700B) Battery which is 2s (6.6V), and 1700mAh. Used for the Futaba 4PX Radio. This product was added to our catalog on January 11, 2021
$54.99
Futaba FUTUBB1220, Futaba Transmitter Carrying Box
The Futaba Transmitter Carrying Box is an excellent choice to store and protect your radio investment. The exterior features a gloss black finish over a durable hardshell. A reinforced rubber handle allows for increased grip and rigidity. An interior retention strap keeps your transmitter locked in place during travel. To top off the protection, Futaba includes a soft neoprene bag to protect your transmitter from scratches. Features: Durable hardshell gloss black finish. Rubber handle for increased grip and rigidity. Sized to fit in any overhead airplane compartment. Elastic retention straps for reduced movement of transmitter. Additional soft neoprene bag for added protection from scratches. Shoulder strap for hands off transport included. Specifications: Size 9x17x12in This product was added to our catalog on September 6, 2023
$109.99
Futaba FUTUBT2333, Futaba 10PX 2.4GHz Transmitter Module Adapter (Mini-Z)
FUTUBT2333, Futaba 10PX 2.4GHz Transmitter Module Adapter (Mini-Z) Module Adapter Overview: This is the Futaba 10PX Mini-Z Module Adapter, designed for use with the Futaba 10PX transmitter. With this adapter, you can seamlessly integrate the mini-z module (FS-RM005), expanding the versatility of your 10PX transmitter. Features: Mini-Z Compatibility Plug-N-Play with Mini-Z Module (FS-RM005) Includes: (1) Futaba 10PX Mini-Z Module Adapter Needed to Complete: Futaba 10PX Transmitter Mini-Z module (FS-RM005) This product was added to our catalog on December 9, 2024
$49.99
Hot Racing HRASHS88H, Hot Racing Aluminum CNC Heavy Duty Servo Saver w/Heavy Spring Tension (Black)
HRASHS88H, Hot Racing Aluminum CNC Heavy Duty Servo Saver w/Heavy Spring Tension (Black) Hot Racing Aluminum CNC Heavy Duty Servo Saver in Black anodize, with a heavy spring tension. Features: CNC 6061-T6 aluminum construction Black anodized Multiple inserts to accommodate many different servo splines Specifications: Length: 1-1/2 inch (38mm) Diameter: 1 inch (25mm) 23 Tooth Insert (K): (KO, Sanwa, JR, Airtronics, Spektrum) 24 Tooth Insert (H): (Hitec) 25 Tooth Insert (F): (Futaba, Traxxas, SAVOX, Tactic, some of the new Hitec) Includes: (1) servo saver (1) spline adapters for 23 tooth (KO, Sanwa, JR) (1) spline adapters for 24 tooth (Hitec) (1) spline adapters for 25 tooth (Futaba) This product was added to our catalog on February 12, 2022
$13.99
KYOSHO KYO71998, Kyosho Speed House Mini-Z AAA NiMh Batteries (800HV) (4)
KYO71998, Kyosho Speed House Mini-Z AAA NiMh Batteries (800HV) (4) Kyosho Speed House "800HV" Mini-Z AAA NiMh Batteries provide great power and good runtime for any Mini-Z platform. Kyosho Speed House Mini-Z USB Charger (KYO71999) is recommended for charging applications. This product was added to our catalog on October 31, 2024
$11.99
KYOSHO KYO82044, Kyosho Futaba Mini-Z Evo2 Receiver Unit
KYO82044, Kyosho Futaba Mini-Z Evo2 Receiver Unit Kyosho Futaba Mini-Z Evo2 Receiver Unit. This optional receiver is designed for Mini-Z platforms to allow racers to use their Futaba 10PX, 4PM Plus, PX/R, 7XC and 4PM Evo transmitters! Package includes one Mini-Z Evo2 receiver unit for Futaba transmitters. This product was added to our catalog on September 9, 2024
$42.99
KYOSHO KYO82151-11, Kyosho FLYSKY RM005 Module (Mini-Z/FHSS)
KYO82151-11, Kyosho FLYSKY RM005 Module (Mini-Z/FHSS) Kyosho FLYSKY RM005 Module. This optional module is designed for the Noble NB4 Transmitter. Using this will allow you to control the Mini-Z EVO receiver with the Noble NB4 transmitter. Package includes one transmitter module.NOTE: It is necessary to insert this module into the slot in the grip of Noble NB4, download the compatible firmware (Ver.2.0.97), and update the transmitter. This product was added to our catalog on November 12, 2024
$29.99
KYOSHO KYOET001X, Kyosho Easylap Micro Transponder
KYOET001X, Kyosho Easylap Micro Transponder The EasyLap Micro Transponder is an incredibly small and lightweight transponder optimized for Mini-Z and similar micro class cars. Compatible with EasyLap & Robitronic Lap Counter systems, this transponder measures 10.5x9.5x5.8mm and includes cable for Mini-Z ASF, Pro, Evo, RWD/AWD RTR and 3 pin JST connector. NOTE: If used on MR03 "Sports" or AWD "Sports" (blue antenna) KYOET009-S cable is required. Features: Compatible with EasyLap & Robitronic Lap Counter systems Updated smaller version 10.5x9.5x5.8mm Includes cable for Mini-Z ASF, Pro, Evo, RWD/AWD RTR and 3 pin JST connector This product was added to our catalog on November 25, 2024
$24.99
KYOSHO KYOET009-S, Kyosho Mini-Z Sports EasyLap Connect Cable
KYOET009-S, Kyosho Mini-Z Sports EasyLap Connect Cable Kyosho Mini-Z Sports EasyLap Connect Cable. This cable allows the EasyLap Micro Transponder to be used with Kyosho Mini-Z Sports Models. This product was added to our catalog on November 25, 2024
$4.99
KYOSHO KYOMZN189, Kyosho Mini-Z MR-03W-MM Audi R8 2015 LMS Body (Unpainted)
KYOMZN189, Kyosho Mini-Z MR-03W-MM Audi R8 2015 LMS Body (Unpainted) The Kyosho Mini-Z MR-03W-MM Audi R8 2015 LMS Body is a detailed body option for the MR-03W-MM platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift. Package includes one un-painted body, four wheels, one window insert and accessory parts trees to complete the body. NOTE: Body included will be white in color and not painted. This product was added to our catalog on October 31, 2024
$34.99
KYOSHO KYOMZW1, Kyosho Mini-Z Ball Bearing Set (7)
KYOMZW1, Kyosho Mini-Z Ball Bearing Set (7) This is an optional Kyosho Ball Bearing Set, and is intended for use with the Kyosho Mini-Z MR-02 and MR-03 chassis. These replace the standard kit bearings with high quality precision bearings that will help to reduce friction and increase run time. The package includes seven bearings, four for the front wheels, two that are installed inside the motor mount, and one goes on the rear wheel closest to the gears and differential. This product was added to our catalog on October 31, 2024
$19.99
KYOSHO KYOMZW202, Kyosho MM-Type Rear Spring Set (3)
KYOMZW202, Kyosho MM-Type Rear Spring Set (3) This is an optional Kyosho MM-Type Rear Spring Set, and is intended for use with the Kyosho Mini-Z MR-015, MR-02 and MR-03 MM-Type chassis. This package includes three springs, allowing you to tune your Mini-Z to a variety of track conditions. The red spring is soft, the green spring is medium and the yellow spring is hard. This product was added to our catalog on October 31, 2024
$8.00
KYOSHO KYOMZW308, Kyosho Mini-Z MR-03 Ball Differential Set II (LM Only)
KYOMZW308, Kyosho Mini-Z MR-03 Ball Differential Set II (LM Only) The Kyosho Mini-Z MR03 Ball Differential Set II is an optional upgrade for the Mini-Z MR03 with LM motor mount. This differential is lighter than the stock parts and offers improved left/right weight distribution. Additionally, a set screw can be added to the threaded hole on the left wheel hub This product was added to our catalog on November 12, 2024
$50.99
KYOSHO KYOMZW38-20B, Kyosho Mini-Z 11mm Wide Racing Radial Tire (4) (20 Shore)
KYOMZW38-20B, Kyosho Mini-Z 11mm Wide Racing Radial Tire (4) (20 Shore) This is a set of four Kyosho 11mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a directional pattern and the durometer hardness rating is etched on the inside of the tire.Choose from 10, 20, 30 or 40 Shore compounds (softest to hardest). Use different compounds to tune the level of traction for various track conditions; softer when you need more grip and harder when you want less grip. These tires must be used with 11mm wide wheels. This product was added to our catalog on October 31, 2024
$8.99
KYOSHO KYOMZW401, Kyosho Front Spring Set (10)
KYOMZW401, Kyosho Front Spring Set (10) This is an optional Kyosho Front Spring Set, and is intended for use with the Kyosho Mini-Z MR-03. This package includes five sets of springs, allowing you to tune your Mini-Z to a variety of track conditions. The red springs are soft, the purple springs are medium soft, the green springs are medium, the orange springs are medium hard and the yellow springs are hard. This product was added to our catalog on October 31, 2024
$15.99
KYOSHO KYOMZW403, Kyosho MM/LM-Type Carbon Fiber Rear Suspension Plate Set
KYOMZW403, Kyosho MM/LM-Type Carbon Fiber Rear Suspension Plate Set This is an optional Kyosho MM/LM-Type Carbon Fiber Rear Suspension Plate Set, and is intended for use with the Kyosho Mini-Z MR-03 MM and LM-Type chassis. This suspension plate set will increase the rigidity in the rear of the chassis and is ideal for high traction surfaces. Includes three different width plates, each with different levels of rigidity and will allow you to tune the flex of the chassis to suit a variety of track conditions. This product was added to our catalog on October 31, 2024
$19.99
KYOSHO KYOMZW404, Kyosho RM/HM-Type Carbon Fiber Rear Suspension Plate Set
KYOMZW404, Kyosho RM/HM-Type Carbon Fiber Rear Suspension Plate Set This is an optional Kyosho RM/HM-Type Carbon Fiber Rear Suspension Plate Set, and is intended for use with the Kyosho Mini-Z MR-03 RM and HM-Type chassis. This suspension plate set will increase the rigidity in the rear of the chassis and is ideal for high traction surfaces. Includes three different width plates, each with different levels of rigidity and will allow you to tune the flex of the chassis to suit a variety of track conditions. This product was added to our catalog on October 31, 2024
$19.99
KYOSHO KYOMZW407, Kyosho Mini-Z MR-03 SP Stainless King Pin Ball Set
KYOMZW407, Kyosho Mini-Z MR-03 SP Stainless King Pin Ball Set This is an optional Kyosho SP Stainless King Pin Ball Set, and is intended for use with the Mini-Z MR-03 chassis. Precision machined from stainless steel, these king pin balls deliver smooth front suspension movement, improving the overall performance of the chassis. This product was added to our catalog on October 31, 2024
$5.99
KYOSHO KYOMZW409, Kyosho MM/LM-Type FRP Rear Suspension Plate Set
KYOMZW409, Kyosho MM/LM-Type FRP Rear Suspension Plate Set Kyosho MM/LM-Type FRP Rear Suspension Plate Set This product was added to our catalog on October 31, 2024
$16.99
KYOSHO KYOMZW437, Kyosho FRP Rear Suspension Plate Set (0.5mm) (MR-03MM/LM/MM2)
KYOMZW437, Kyosho FRP Rear Suspension Plate Set (0.5mm) (MR-03MM/LM/MM2) Kyosho FRP Rear Suspension Plate Set. This optional suspension plate set is intended to fit the Mini-Z MR-03MM, LM, and MM2 vehicles. Included are soft, medium and hard plates giving you the ability to tune the suspension to your preference. Package includes one soft rear suspension plate, one medium rear suspension plate and one hard rear suspension plate. This product was added to our catalog on October 31, 2024
$13.99
KYOSHO KYOMZW439R, Kyosho Mini-Z LED Light Set (Clear & Red) (ICS Connector)
KYOMZW439R, Kyosho Mini-Z LED Light Set (Clear & Red) (ICS Connector) This is an optional Kyosho Mini-Z Clear and Red LED Light Set. These lights fit ASF and MHS boards (Black or red antenna) with ICS connector port. Note: DOES NOT FIT Sports/RWD/FWD/AWD (blue or white chassis antenna) This product was added to our catalog on November 12, 2024
$9.99
Racers Edge RCE3152BK, Racers Edge Nylon Lock Nut M2 (10pcs) Black
RCE3152BK, Racers Edge Nylon Lock Nut M2 (10pcs) Black Nylon Lock Nut M2 (10pcs) Black This product was added to our catalog on October 31, 2024
$5.99
Racers Edge RCE3152S, Nylon Lock Nut M2 (10pcs) Silver
RCE3152S, Nylon Lock Nut M2 (10pcs) Silver This product was added to our catalog on October 31, 2024
$5.99
Racers Edge TFE6099, FastEddy Kyosho Mini-Z RWD MR-03 Sealed Bearing Kit
TFE6099, FastEddy Kyosho Mini-Z RWD MR-03 Sealed Bearing Kit Team FastEddy Kyosho Mini-Z RWD MR-03 Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again. Includes: (4) 2x6x2.5 (3) 3x6x2.5 This product was added to our catalog on October 31, 2024
$9.99
Racers Edge TFE956, Kyosho Mini Z Sealed Bearing Kit
TFE956, Kyosho Mini Z Sealed Bearing Kit Kyosho Mini Z Sealed Bearing Set (4) 2x6x2.5 (4) 3x6x2.5 This product was added to our catalog on October 31, 2024
$9.99