Introducing 40mm AZI props! NewBeeDrone is dedicated to providing the best FPV drone products in the industry. The Azi Props come from a 9-month project with NewBeeLabs to create micro props for flight time, speed, & control. After many iterations and tests, their team has developed light, well-rounded props for freestyle and racing. They boast linear throttle control, quicker spool-up times, cornering grip, higher top-end speed, bottom-end grunt, and efficient performance.
Check out the rest of our Micro Props, and the rest of our NewBeeDrone products.
Specifications
Material: Polycarbonate
Diameter: 40mm
Pitch: 37.9mm
Shaft Hole: 1mm
0.3g ea.
Hub Thickness: 5mm
Includes
1x NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
Check out the second generation goober canopies that works with 14 x 14 size FPV cameras. As long as the camera board size has 14 x 14 mounting screw hole, and has a side screw hole this canopy will work with it. It also allows you to adjust the angle of the camera from 0-55 degrees.
Check out all our whoop frames and all our NewBeeDrone gear!
Features
Adjust camera angle from 0- 55 degree.
Includes
1x NewBeeDrone BeeBrain Goober Canopy V2 Camera Mount - Choose Color
A replacement camera for the Beebrain FCs and Whoops. Can be used as a replacement camera for other applications too.
Check out all our Nano FPV cameras and all our NewBeeDrone products!
Specifications
600 TVL
120 Degree Viewing Angle
(20 Degree Mount)
1.7g (2.9g with Mount)
Dimensions: W 14mm x H 14.25mm x D 14mm
Includes
BeeEye Camera x1
(BeeEye Camera Mount x1)
Experience top-tier flight performance with the NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller. This controller features a 3-6S power range, 20x20 mounting, and dual BMI270 processing power for a stable, reliable flight experience. Get ready for smooth, long-distance flight with this advanced drone controller.
Check out our 20x20 FCs, and all our NewBeeDrone products!
Features
Built-in 4 IN 1 ESC socket (including ESC telemetry, External current sensor) JST1.0 8Pin
Plug and plug with NBD Cricket200 ESC/Infinity200 ESC. Also compatible with most of the ESC on the market.
Built-in solder pads for ESC signal output and power
Printed layout instructions ON the board - no need for instructions!
DJI FPV Air Unit socket (use UART1 and UART6)
6 UARTS on board.
Specifications
MCU：STM32F722 - 216MHz
Gyro: 2 BMI270
BEC: 5V/3A
Interface：6
Mounting Size: 20x20mm
Size: 31.5x27mm
Input Power: 3-6S
Additional Infomation
3V3 100mA
9V 2A 18W Design for DJI FPV Air Unit
5V Camera Power
BetaFlight OSD
UART1 (Only RX, Air Unit connector)
UART2 (Free)
UART3 (Free)
UART4 (TX and RX connected together for F.Port)
UART5 (Only RX, ESC Telemetry)
UART6 (MSP/Configuration Port for Air Unit)
Firmware can be downloaded HERE.
Includes
1x NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller
4x Grommets short 4x Grommets Long
1x Cricket200 FC to DJI Air module cable 70mm
Wiring Diagram
NewBeeDrone Infinity AIO V2 is the next generation of Infinity AIO Flight Controller. NBD has invested an immense amount of R&D time to optimize the hardware between high current and signal processing layout to make the board extremely compact and with no interference. Additionally, by sealing every component inside the aluminum heatsink which acts like a shield to protect from dust and other conditions, NBD maximizes the physical toughness of the AIO stack.
The NewBeeDrone Infinity AIO V2 Pro is upgraded from AIO V2. Now it comes with Dual BMI270 Gyro. Better performance on handling noise and better reliability. Dual-Gyros allows device redundancy and also measurement redundancy. Having two gyros mounted to each other, the flight controller is able to cancel out the effects of a noisy axis on one of the IMUs to better handle strong winds and gusts, allowing smoother flight capabilities for filming aerial views.
Check out our AIO flight controllers, as well as the rest of our NewBeeDrone selection!
Specifications
Voltage Input: 3-6S
MCU: STM32F745VEH6
Gyro: 2xBMI270
Blackbox: 16MB
UARTs: 5
ESC MCU: SMT32G071 BLHELI32
Max Continuous Current: 55A
Max Burst Current: 65A
BEC: 10V 3A 30W Design for DJI FPV Air Unit
Betaflight OSD support Analog build
I2C: SCL & SDA ready
Buzzer: Yes
LED: Yes
5V 3A Power supply for external LED or GPS module
Mounting Pattern: 30.5x30.5
Weight: 22g
Includes
1x NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC
1x Infinity AIO V2 PRO to DJI Air Module Cable 100mm (Silicon wire)
1x Infinity AIO V2 PRO to DJI Air Module V2 Cable 100mm (Silicon wire)
2x Infinity AIO V2 PRO8 16Pin Cable 150mm (Teflon wire)
13x Nylon Lock Nut
5x Steel Screw M3x14
4x Grommets Short 4x Grommets Long
1x 470uf 35v Electrolytic Capacitor
1x XT60 Cable
Introducing the NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)'s advanced navigation capabilities, featuring wide-range precision GPS/compass technology. Improved accuracy, compact size, and lightweight design (17mmx12mmx5mm, 2.16g) make it ideal for navigating difficult terrain. Perfect for projects requiring space and weight conservation. The NewBeeDrone M10Q Micro GPS (10th Gen) is the ideal outdoor navigation tool. With its built-in compass, you'll be able to track your location while navigating remote areas with confidence accurately. Grab one of the newest, smallest, and most powerful FPV GPS on the market right now, brought to you by great people at NewBeeDrone.
Check out our other GPS options and all our NewBeeDrone products!
Features
10th generation GPS
Only weighing 2.16g
Super tiny
Specifications
Ceramic Antenna 2DB
Frequency: GPS L1, GLONASSL1, BDS B1, GALILEOE1, SBAS L1, QZSS L1
Compass: QMC5883
Baud Rate: 115200DPS
Output Frequency: 1HZ-10HZ, Default 10HZ
Power Supply: 5V
Speed Accuracy: 005M/S
Weight: ~2.61g
Includes
1x NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)
1x JST 0.8 6pin cable
Check out the NewBeeDrone Mark3 Camera w/ Goober Canopy, as this micro camera comes with a micro canopy to protect your camera from a harsh crash! However not just any canopy as the Goober canopy is one of the most durable and heavy canopies on the market. The Goober canopy was made for maximum protection for your hardware, and has very high durability, which comes with a bit more weight. With all this protection can you rest assured the safety for this new camera. An upgrade a to a design based on the Mark 2 Camera, The Hummingbird Camera Mark 3, with 25mW of true power output to provide the best performance for racing.
Be sure to check out all our Micro FPV cameras and our entire NewBeeDrone selection!
Features
Steady and Undisrupted 25mW
No Blowouts
Only sharp video for sharp flights
Plug-N-Play Connector
Wide Input Voltage Range
Specifications
VTX: 25mW
Camera: BeeEye Camera
Weight: 5.0g
Includes
1x NewBeeDrone Mark3 Camera w/ Goober Canopy - Black
Wiring Diagram
Are you tired of the stock DJI goggle foam that leaks light or is just plain uncomfortable? Have you tried other aftermarket DJI goggle foams that don't fit right or make it difficult to breathe from your nose? We've tried them all too and none of them come close to the quality and comfort of the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles.
Created from Soft Touch NewBeeDrone Comfort Foam, our goggle foam is perfectly sculpted to fit all face shapes. Some foams are too thin and make goggles uncomfortable. Others are too thick and make goggles stick out too far, throwing off the balance and making them feel heavy. The NewBeeDrone Max Comfort Goggles Foam is the perfect compromise at 23mm at its thickest and 14mm at its thinnest. We named them Max Comfort for a reason.
Also included is an optional V Pad to eliminate that last little bit of light leak around the bridge of the nose that plagues some pilots.
Throw out that old, sweaty, ill-fitting goggle foam and get the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles.
Check out our other FPV goggles and accessories!
Specifications
23mm at its thickest.
14mm at its thinnest.
Includes
1x NewBeeDrone Max Comfort Goggle Foam for DJI Goggles
1x V Pad
1x Set of V Pad Velcro Squares
Are you tired of the stock DJI goggle foam that leaks light or is just plain uncomfortable?
Introducing the NewBeeDrone Max Comfort Foam Cushion for DJI Goggles 2, designed to provide comfort and optimal functionality. With the foam's increased height at both sides eliminates light leakage while its high compressibility maintains an optimal distance between your lens and your eyes. It also has an ergonomic shape to conform to your face and provide a snug fit, plus added height at the bottom to distribute the weight across your face instead of your nose. Enjoy clear visuals and a comfortable fit with the Goggles 2 max comfort foam cushion.
Check out our other FPV goggles and accessories, and all our NewBeeDrone products!
Features
Easy to apply and remove.
Eliminates light leak with included, optional V Pad for the bridge of the nose.
Made out of extra comfortable Soft Touch NewBeeDrone Comfort Foam.
Perfectly sculpted to fit all faces.
The perfect thickness for comfort and goggle balance.
Specifications
23mm at its thickest.
14mm at its thinnest.
Color: Grey
Includes
1x NewBeeDrone Max Comfort Goggle Foam for DJI Goggles 2
Are you looking to upgrade the feel of your new Fat shark HDOs, HD3s, Dominators, or Attitudes?
Try the NewBeeDrone MaxComfort goggle cushion! Your stock foam not cutting it, or beaten and tired? Experience the soft touch of NewBeeDrone's new foam.
Check out our other FPV goggles and accessories!
Specifications
Foam Thickness: 11mm
Includes
1x NewBeeDrone Max Comfort Foam Cushion for Fatshark Goggles
Have you experienced any discomfort with the stock foam cushion on your HDO2 goggles?
Try the NewBeeDrone MaxComfort goggle cushion! Your old stock foam is beat and tired, experience the soft touch of their new foam! Check out our other FPV goggles and accessories, and our NewBeeDrone selection!
Includes
1x NewBeeDrone Max Comfort Foam Cushion for Fatshark HDO2 Goggles
Introducing the NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles, designed to provide comfort and optimal functionality. With the foam's increased height at both sides eliminates light leakage while its high compressibility maintains an optimal distance between your lens and your eyes. It also has an ergonomic shape to conform to your face and provide a snug fit, plus added height at the bottom to distribute the weight across your face instead of your nose. Enjoy clear visuals and a comfortable fit with the HDZero Goggles cushion.
Check out our other FPV goggles and accessories, and all our NewBeeDrone products!
Features
Easy to apply and remove.
Made out of extra comfortable, Soft Touch NewBeeDrone Comfort Foam.
Perfectly sculpted to fit all faces.
The perfect thickness for comfort and goggle balance.
Specifications
8.5mm thickness
Color: Black
Includes
1x NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles
Ring Magnets for an FPV drone? Yes! Team NewBeeDrone put in countless hours to figure out how they could improve upon the Smoov-Certified freestyle motor which provides super smooth performance for freestyle and cinematic FPV while maintaining the durability and precision machining you've come to expect from NewBeeDrone. NBD are proud to say that we have done just that... again!The NewBeeDrone Smoov V2 2306.5 1750Kv Motor has not only improved upon our very successful V1 motor, it is now 3 grams lighter! It's constructed with 7075 aluminum alloy unibell design for the best structural rigidity and comes with fully molded ring-style magnets.
Ring motors are also easier to clean than traditional motors. Unlike traditional square magnet motors, the Smoov ring magnets have no physical spacing between the magnets to allow for quick and easy removal of dirt, grime, or anything you can manage to get into them.Making a fully molded ring magnet with high magnetic flux density is at the heart of the design. NBD has developed a ring magnet that can hold up to N48SH levels! Ring magnets are typically used in camera gimbals because they need to operate silky smooth. Traditional gimbal motors are super smooth but they lack punch and power. The Smoov V2 motors have both, along with improved balancing and better performance. The Smoov V2 ring magnet motors have more punch, less weight, higher strength, and they're Smoover than ever!
This motor is also available in 2450Kv!
Check out our vast brushless motors selection, and all our NewBeeDrone products!
Features
Single-winding with 0.15mm lamination stator.
Ring Magnet N48SH NdFeB V2
Super Smoov performance for freestyle and cinematic purpose
Japanese NSK Bearing
7075 Aluminum
6" prop compatible with Motor Limit Settings in BetaFlight
Specifications
Input Voltage: 6S
Stator Diameter: 23mm
Stator Height: 6.5mm
Shaft Diameter: 5mm
Motor Dimension (Dia.*Len): Ø29.4mm*31.6mm
Weight: 36g(include cable)
Wire Size: 20AWG 150mm
Bearing: NSK/NMB 684ZZ Ø9×Ø4×L4mm
Includes
1x NewBeeDrone Smoov V2 2306.5 1750Kv Motor
1x Hardware Pack
Ring Magnets for an FPV drone? Yes! Team NewBeeDrone put in countless hours to figure out how they could improve upon the Smoov-Certified freestyle motor which provides super smooth performance for freestyle and cinematic FPV while maintaining the durability and precision machining you've come to expect from NewBeeDrone. NBD are proud to say that we have done just that... again!The 2306.5 Smoov V2 ring magnet motor has not only improved upon our very successful V1 motor, it is now 3 grams lighter! It's constructed with 7075 aluminum alloy unibell design for the best structural rigidity and comes with fully molded ring-style magnets.
Ring motors are also easier to clean than traditional motors. Unlike traditional square magnet motors, the Smoov ring magnets have no physical spacing between the magnets to allow for quick and easy removal of dirt, grime, or anything you can manage to get into them.Making a fully molded ring magnet with high magnetic flux density is at the heart of the design. NBD has developed a ring magnet that can hold up to N48SH levels! Ring magnets are typically used in camera gimbals because they need to operate silky smooth. Traditional gimbal motors are super smooth but they lack punch and power. The Smoov V2 motors have both, along with improved balancing and better performance. The Smoov V2 ring magnet motors have more punch, less weight, higher strength, and they're Smoover than ever!
This motor is also available in 1750Kv!
Check out our vast brushless motors selection, and all our NewBeeDrone products!
Features
Single-winding with 0.15mm lamination stator.
Ring Magnet N48SH NdFeB V2
Super Smoov performance for freestyle and cinematic purpose
Japanese NSK Bearing
7075 Aluminum
6" prop compatible with Motor Limit Settings in BetaFlight
Specifications
Input Voltage: 4S
Stator Diameter: 23mm
Stator Height: 6.5mm
Shaft Diameter: 5mm
Motor Dimension (Dia.*Len): Ø29.4mm*31.6mm
Weight: 36g(include cable)
Wire Size: 20AWG 150mm
Bearing: NSK/NMB 684ZZ Ø9×Ø4×L4mm
Includes
1x NewBeeDrone Smoov 2306.5 2450Kv Motor
1x Hardware Pack
Used to be everyone had a pile of these laying around. If you're flying a linear dipole on your whoop and wondering where your old rubber ducky flew off to, we've got you covered! NewBeeDrone explains it simply in their Honey Patch listing: "If you are using a linear whip antenna on your micro quad and using a circular antenna to receive you would be experiencing a 3db loss due to the mixed polarization signals, for each 3db drop in signal that is a half in power so effectively your 25mW vtx will only be seen as transmitting 12.5mW."
Just a simple linear omni antenna, these work great when paired with a linear patch like the NewbeeDrone Honey Patch or the Menace Bandicoot on your diversity module. The downside of linear polarization is its susceptibility to multi-path interference. Locations with lots of metal and hard surfaces will tend to reflect lots of RF causing a noisy FPV feed. The ImmersionRC rapidFIRE module is terrific at handling this type of interference.
Check out all our linear antennas as well as the entire receiver antenna selection!
Features
360° rotation and 90° bend articulation of easy mounting and positioning
Knurled SMA for easy installation and removal
Cheap!
Specifications
Gain: 3 dBi
Type: Omni-directional Dipole
Polarization: Linear Vertical
VSWR: 1.8:1
Frequency: 5100~5800MHz
Size: L105xW10xH10mm
Weight: 14g
Includes
1x Omni-Directional 5.8GHz Articulated SMA "Rubber Ducky" Antenna - Linear
The perfect Omnidirectional antenna to go with your Orqa goggles! Let signal coverage anxiety fade away with this high performance antenna.
Check out all our antennas and our entire Orqa Selection!
This antenna pairs perfectly with the Orqa FPV.P1.Pro antenna.
Specifications
Operating Frequency: 5.65GHz-5.97GHz
Gain: 1.2dBi
Polarization: RHCP
Connector Type: SMA
Weight: 11g (w/o connector)
Includes
1x Orqa FPV.O1.Pro 5.8GHz SMA Antenna
Capacitors can make your FPV video signal cleaner, and your mini quad fly better. Grab one and solder it in today. This version comes with short leads to solder too. The side with the gray stripe is the negative.
Check out all our Low-ESR capacitors or all our capacitors & accessories.
Check out all of our tools and building supplies as well.
Specifications
FC Series
Capacitance: 470µF
Voltage - Rated: 35V
Lead Spacing: 3.00mm
Diameter: 10mm
Height: 21mm
Weight: 1.85g
Includes
1x Panasonic FC 470uF 35V Capacitor for ESC Noise Reduction
This DIY wiring kit takes the guesswork out of hunting for compatible wires to connect your camera and AIO board.
Some AIO boards, like the HappyModel X12 2S AIO Whoop Flight Controller, come with a PH1.0 connector for the camera and includes a connecting wire. However, if we wanted to use a Caddx Ant Nano FPV Camera, which has a different JST1.25 connector and different ground/volt/signal layout, we would have to solder to the board. Both the flight controller and the camera come with connecting wires but you would still have to solder to the flight controller. We were looking for a true plug-and-play option, but could not find one. So we created this kit for those specific situations that call for it.
Just remember the pin layout for the camera and board. The wire is not prebuilt as different cameras and boards have different pin layouts.
Includes
1x JST1.25 connector
1x PH1.0 connector
3x 30awg wires (red, black, and yellow)
Check out the Hook V2 5" Freestyle Frame Kit, from PIRAT. This brand is more of the upper echelon for quality and premium frames.
The V2 frame features include more durability, Caddx Vista integration, and adaptability to all camera sizes. Developed in collaboration with PDEVX FPV pilot.
Crafted with high-quality carbon fiber and aluminum parts, the Hook V2 is a tough frame that focuses on excellent CG balance to give a smooth, super-tunable flight. Custom made with 235mm motor distance to give you enough space for clean air and flight stability.
We also have the Hook V2 7" version for this frame kit!
Be sure to check out all our 5" frames, and all our PIRAT Products.
Features
5mm Ams and 2.5mm Bottom/top Plate thickness
Works with most camera sizes - 22 or 20mm
Allows 21mm Maximum Stack Height
7075 T6 Aluminum Custom Standoff
Full T10 Torx 12.9 Steel Screw Set
Chamfered Full 3K T300 Carbon
Toilet Tank LiPo Positioning
30x30 Mounting Pattern
Specification
Stack Mounting: 30x30, 20x20
Carbon Material: Chamfered Full 3K T300
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm
Maximum Stack Height: 21mm
Arm Size: 5"
Weight: 116g
Wheelbase: 235mm
Mounting Pattern: 30x30
Model: Pirat Hook V2
Arm thickness: 5mm
Motor Bolt Pattern: 16x16mm/19x19mm
Manual
Pirat Hook V2 Frame
Includes
PIRAT Hook V2 Freestyle 5" Frame Kit
2x 28mm Custom spacers in 7075 aluminum
5x 21mm Custom spacers in 7075 aluminum
16 x M3 / 8mm Black pan motor screws
1x VTX Antenna support in 3D printing
8x 6061 Aluminum Custom washers
4x M3 / 12mm countersunk screws
4x M3 / 16mm countersunk screws
6x M3 / 8mm countersunk screws
4x M3 / 10mm gold pan screws
1x 20mm / 230mm lipos straps
4x 5mm Arm
4x Black self-locking nuts
4x Foam landing pad
1x Silicone lipo pad
1x Silicone eyelet
2x Camera plate
1x Bottom plate
1x Middle plate
1x Top plate
Check out the Sloop V3 5" Freestyle Frame Kit, from PIRAT. This brand is more of the upper echelon for quality and premium frames out there.
Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight.
Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be "smooth as hell" and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks. It features 20x20mm mounting holes in the rear for mounting of a Caddx Vista air unit or an analog video system.
Be sure to check out all our 5" frames, and all our PIRAT Products.
Features
30x30 stack
Mini camera size (predator mini like / 22mm width)
Chamfered Full 3K T300 carbon
7075 T6 aluminum custom standoff
Full T10 Torx 12.9 steel screw set.
5mm arms, 2.5mm bottom & top plate
27mm height for your stack.
Specification
Stack Mounting: 30x30
Carbon Material: Chamfered Full 3K T300
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm
Maximum Stack Height: 21mm
Arm Size: 5"
Arm thickness: 5mm
Motor Bolt Pattern: 16x16mm/19x19mm
Manual
Pirat Sloop V3 Manual
Includes
1x PIRAT Sloop V3 5" Freestyle Frame Kit
4x 5mm Arm 5"
1x 2.5mm Bottom plate
1x 2.5mm Top plate
2x 1.5mm Camera plate
1x 2mm Cross plate
1x 3D Printed VTX Antenna Mount
8x 6061 Aluminum Custom washers
4x 28mm Custom standoffs in 7075 aluminum
4x 21mm Custom standoffs in 7075 aluminum
4x Custom design 5mm standoffs in 7075 aluminum
8x Black Hex Press nuts
8x 8mm M3 Torx T10 12.9 steel countersunk screws
8x 12mm M3 Torx T10 12.9 steel countersunk screws
4x 10mm M3 Torx T10 12.9 steel gold colored mushroom head screws
4x 15mm M3 Torx T10 12.9 steel countersunk head screws
2x 20mm / 220mm lipo strap
1x Silicone grommet for battery cable
1x Silicone lipo pad
4x Foam landing pad
1x Torx T10 key
This lens ring fits any M12 camera.
Check out all our replacement cam parts & accessories!
Includes
1x Plastic M12 Replacement Lens Lock Ring for FPV Camera
The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.
Be sure to check out all our micro frames, and all our Quadifier products!
Features
Designed for 20x20 stack
3mm arms
Fits micro 19x19 size cameras
Specification
Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g
Includes
1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit
The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 3.5" frames, and all our Quadifier products!
Features
Designed for 20x20 stack
3mm arms
Fits micro 19x19 size cameras
Specification
Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g
Includes
1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit
The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.Be sure to check out all our 5" frames, and all our Quadifier products!
Features
Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking.
Squish X for smaller size and better GoPro shots
5mm arms
Fits micro 19x19 size cameras
Specification
Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 113g
Includes
1x Quadifier Diamondback 5" Freestyle Frame Kit
1x TPU Kit
Experience a sleek ride with the Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit. Its Squish X geometry provides a smaller size and keeps the propellers out of your camera's view. This was designed to be a hard-core-looking frame with jagged arm ends, a gnarly-looking quad for extreme freestyle pilots! Choose between green and purple for your TPU color.
Be sure to check out all our 5" frames, and all our Quadifier products!
Features
Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking.
Squish X for smaller size and better GoPro shots
GoPro mounts available
5mm arms
Fits micro 19x19 size cameras
Integrated XT60 connector for the top plate (included)
Weight - 130g, 150g with arm guards
Specifications
Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Mid Plate Thickness: 2.65mm
Bottom Plate Thickness: 2.7mm
Top Plate Thickness: 2.65mm
Frame Shape: Squish X geometry
Arm Thickness: 5mm
Frame Weight With TPU: 150g
Includes
1x Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color
1x Hardware set
1x TPU Micro camera mount
1x TPU AXII/lollipop antenna mount
The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.
Be sure to check out all our micro frames, and all our Quadifier products!
Features
Designed for 20x20 stacks
Stretch X for more efficient flight
3.5mm unibody bottom plate
2mm top plate
Fits only nano 14x14 size cameras
Specification
Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g
Includes
1x Quadifier Mamba Racing 3" Micro Frame Kit
1x TPU Kit
The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our micro frames, and all our Quadifier products!
Features
Designed for 20x20 stacks
Stretch X for more efficient flight
3.5mm unibody bottom plate
2mm top plate
Fits only nano 14x14 size cameras
Specification
Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g
Includes
1x Quadifier Mamba Racing 3" Micro Frame Kit - Choose Your Color
1x TPU Kit
The Quadifier Python is an ultralight race frame with 0 compromises. The Python is a race frame that fit all of my requirements for racing. It is super strong while maintaining an impressive weight 60 grams.
Be sure to check out all our 5" frames, and all our Quadifier products!
Features
Designed for 20x20 stacks
Slight Stretch X for more efficient flight
5mm arms
Fits only nano 14x14 size cameras
Specification
Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 16x16 M3
Main Plate Thickness: 2mm
Frame Shape: Slight Stretched X
Motor to Motor: 200mm
Arm Thickness: 5mm
Frame Weight With TPU: 70g
Includes
1x Quadifier Python 5" Racing Frame Kit
1x TPU Kit
Engineered for high performance, the Quadifier Venom 2207 2111Kv Motor Racing Motor offers incredible power and torque, allowing for maximum speed and responsiveness.
Check out all our Quadifier products, and our entire selection of motors!
Features
Frosted Matte Unibell Design
High-strength steel shaft and 7075 aluminum
Ingenious non-slip structure of the prop seat
220°C high temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base and wire outlet protection braces
34.2g (including 150mm wire)
Specification
Model: Venom 2207
Input Voltage: 6S Lipo
Kv: 2111Kv
Configuration: 12N14P
Mounting pattern: 16x16mm
Stator Diameter: 23mm
Stator Height: 6mm
Shaft Diameter: Φ5.0mm
Size: Φ28.4x32.3MMmm
Weight: 32.2g
Target: Racing & Freestyle FPV'
Includes
1x Quadifier Venom 2207 2111Kv Motor
The R88 V2 receiver is Frsky D8 / D16 and Futaba SFHSS Compatible and offers a range suitable to drones and RC modelers. This receiver has a total of 8 PWM channels + 9 SBUS Channels (Sbus has 8 control channels + 1 RSSI channel). Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver, which can be read by various flight controllers and sent to the OSD to show signal strength in the FPV video feed. Check out our RadioMaster selection, the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Specifications
Signal format: D8, D16 & SFHSS Compatible
Output format: PWM
Frequency Range: 2400 MHz to 2483.5 MHz
Power input range: 4.5-6V
Output format: PWM/Sbus
Support return: support return RSSI
Dimension: 40x26x16mm
Range: more than 1km
Antenna length: 15 cm
Weight: 11g
User Manual
User Manual
Includes
1x RadioMaster R88 V2 2.4GHz Wing Receiver
1x Cable
Bind method
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2
Fail-safe Protection:
1. Press the BIND button once within 10 seconds of the receiver being powered on, and the
receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to
prevent accidental changes to to the fail-safe settings while preparing the model for fa
RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel.
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3.
The Nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The EP1 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability.
Check out the RP2 if that fits your needs more!
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
TCXO oscillator for solid connection & reliability.
Improved PCB design is better for heat dissipation.
ELRS Firmware V3 (pre-installed)
LED on the top side of PCB.
Solder pads are improved and easier to solder to.
Open-source receiver based on ExpressLRS
Upgraded rigid antenna with greater durability and performance
Specifications
Item: RP1 Nano ExpressLRS 2.4ghz Receiver
Type: ISM
Antenna: 65mm 2.4ghz T Antenna
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 2.2g (Including antenna)
Dimension: 13mmx11mmx3mm
Firmware Version: ExpressLRS v3.0 pre-installed
FW Target: RadioMaster RP1/2 2400 RX
Bus interface: CRSF
User Manual
RP1 Receiver User Manual
Includes
1x RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
1x 65mm UFL 2.4Ghz T Antenna
1x User Manual
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3.
The RP2 has a ceramic antenna, super light & small, ideal for racing. Built-in WIFI lets you upgrade firmware & configure the receiver via WebUI on PC/mobile. Low latency & high refresh rate makes it perfect for FPV & long-range flights. Also great for whoops, drones & fixed-wing models, as this nano receiver can fit anywhere! Developed by Jye Smith & the ExpressLRS team, it uses ESP8285 MCU & SX1280 RF chip. The EP2 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
TCXO oscillator for solid connection & reliability.
Improved PCB design is better for heat dissipation.
LED on the top side of PCB.
Solder pads are improved and easier to solder to.
Open-source receiver based on ExpressLRS
Upgraded rigid antenna with greater durability and performance
Specifications
MCU: ESP8285
Type: ISM
Antenna: On Board SMT Antenna
Bus interface: CRSF
Power input range: 5V
RF Chip: SX1280IMLTRT
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Firmware Version: ExpressLRS V3.0 pre-installed
Signal format: ELRS
FW Target: RadioMaster RP2 2400 RX
Size: 13 x 11 x 7mm
Weight: 0.55g (On Board antenna)
User Manual
RP2 Receiver User Manual
Includes
1 x RadioMaster RP2 V2 2.4GHz ELRS Nano Receiver - Ceramic Antenna
1 x User Manual
Transform your FPV experience with the RCINPOWER GTS V3 1003 10,000Kv Brushless Motor. This motor boasts impressive power, speed, and torque and will leave you stunned. Dare to go faster, farther, and higher than you ever have! Choose between orange with gold accents or blue with pink accents. This motor comes with a a solderless motor connector.
This motor is also available 18,000Kv and 22,000Kv
Check out our micro motors and all our Rcinpower products!
Features
Enables agile and efficient flight maneuvers
Designed specifically for FPV enthusiasts
Compact and powerful microdesign
Specifications
KV: 10000
Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 3mm
Shaft Diameter: 1.5mm
Motor Dimension: 13.5x9.2mm
Weight: 3.45 Grams (5cm Wires)
Idle Current (5 Seconds)@4V: 0.8A
No. Of Cells (Lipo): 1-2S
Max Continuous Power (W) 3S: 85
Internal Resistance: 162mΩ
Max Current (3S): 11.5A
Max. Efficiency Current: (1-3A)>84%
Includes
1x RCinPOWER GTS V3 1003 10,000Kv Micro Motor - Choose Color
1x Screw Kit
Transform your FPV experience with the RCinPOWER GTS V3 1003 18000Kv Brushless Motor. This motor boasts impressive power, speed, and torque and will leave you stunned. Dare to go faster, farther, and higher than you ever have! Choose between orange with gold accents or blue with pink accents. This motor comes with a a solderless motor connector.
This motor is also available 10,000Kv and 22,000Kv
Check out our micro motors and all our RCinPower products!
Features
Enables agile and efficient flight maneuvers
Designed specifically for FPV enthusiasts
Compact and powerful microdesign
Specifications
Max. Efficiency Current: (1-3A)>85%
Weight: 3.45 Grams (5cm Wires)
Motor Dimension: 13.5x9.2mm
Internal Resistance: 162mΩ
Max Continuous Power: 54
Color: Gold and Orange
No. Of Cells (LiPo): 1-S
Max Current (3S): 14.6A
Stator Diameter: 10mm
Shaft Diameter: 1.5mm
Configuration: 9N12P
Stator Length: 3mm
Idle Current: 1.3
Includes
1x RCinPOWER GTS V3 1003 18000Kv Micro Motor - Choose Color
Transform your FPV experience with the RCINPOWER GTS V3 1003 22,000Kv Brushless Motor. This motor boasts impressive power, speed, and torque and will leave you stunned. Dare to go faster, farther, and higher than you ever have! Choose between orange with gold accents or blue with pink accents. This motor comes with a a solderless motor connector.
This motor is also available 10,000Kv and 18,000Kv
Check out our micro motors and all our Rcinpower products!
Features
Enables agile and efficient flight maneuvers
Designed specifically for FPV enthusiasts
Compact and powerful microdesign
Specifications
KV: 22000
Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 3mm
Shaft Diameter: 1.5mm
Motor Dimension: 13.5x9.2mm
Weight: 3.45 Grams (5cm Wires)
Idle Current (5 Seconds)@4V: 1.5A
No. Of Cells (Lipo): 1S
Max Continuous Power (W) 3S: 67
Internal Resistance: 46mΩ
Max Current (3S): 18.1A
Max. Efficiency Current: (1-3A)>84%
Includes
1x RCinPOWER GTS V3 1003 22,000Kv Micro Motor - Choose Color
The RCinPOWER GTS V4 2207 Motor Silver & Pink is the perfect choice for your FPV drones. Featuring an impressive max thrust of over 2KG and quick acceleration, it provides a well-balanced combination of power, torque, and efficiency for reliable performance. Its sturdy design and durable components guarantee long-term operation and make it an ideal choice for FPV pilots.
Choose between 1960Kv and 2040Kv.
Check out our vast brushless motors selection, and all our Rcinpower products!
Specifications
Model: RCinPOWER GTS V4 2207
Kv: 1960Kv
Motor Dimension: 27.3 x 30.3mm
Lead: 20#AWG 150mm
Stator Length: 7mm
Shaft Diameter: 4mm (Hollow)
Stator Diameter: 22mm
Idle Current: Idle Current (10 Seconds)@10V: 1.1A
Weight: 29.9 Grams (2cm Wires)
Internal Resistance: 58mΩ
Max Current (5S): 50.2A
Max. Efficiency Current: (6-9A)>85%
Max Continuous Power (W) 5S: 1200
Configuration: 12N14P
Rated Voltage (Lipo): 5~6S
Includes
1x RCinPOWER GTS V4 2207 1960Kv Motor - Silver & Pink
1x Hardware Set
The RCinPOWER GTS V4 2207 Motor Silver & Pink is the perfect choice for your FPV drones. Featuring an impressive max thrust of over 2KG and quick acceleration, it provides a well-balanced combination of power, torque, and efficiency for reliable performance. Its sturdy design and durable components guarantee long-term operation and makes it an ideal choice for FPV pilots.
Choose between 1960Kv and 2040Kv.
Check out our vast brushless motors selection, and all our Rcinpower products!
Specifications
Model: GTS V4 2207
Kv: 2040Kv
Motor Dimension: 27.3 x 30.3mm
Lead: 20#AWG 150mm
Stator Length: 7mm
Shaft Diameter: 4mm (Hollow)
Stator Diameter: 22mm
Idle Current: Idle Current (10 Seconds)@10V: 1.1A
Weight: 29.9 Grams (2cm Wires)
Internal Resistance: 56mΩ
Max Current (5S): 54A
Max. Efficiency Current: (7-10A)>85%
Max Continuous Power (W) 5S: 1300
Configuration: 12N14P
Rated Voltage (Lipo): 5~6S
Includes
1x RCinPOWER GTS V4 2207 Motor Silver & Pink - Choose Version
1x Hardware Set
RCinPOWER is known for creating some of the highest-quality brushless motors on the market. Try out a set of these new GTS-V3 motors and find out what all the hype is about!
High-end motor made from durable 7075 alloys with strong N52H ARC magnets. The motor is suitable for 6S ultralight 5" and powerful cinewhoops. With its 2mm T-Mount and vibrant pink and teal colors, you can experience superior speed and control at any track. Race on and stand out!
Check out our huge motor selection and all our RCinPOWER products!
Features
Lightweight construction
Enables agile and efficient flight maneuvers
Designed specifically for FPV enthusiasts
Compact and powerful design
Specifications
Shaft Diameter: 3mm(In) 1.5mm(Out)
Motor Dimensions: 23.35x13.8mm
Max Continuous Current: 22.1
Stator Dimensions: 21x4mm
Mounting Pattern: 12x12mm
Internal Resistance: 210mΩ
ldle Current@10V: 0.5A
Configuration: 12N14P
Input Voltage: 4-6S
Weight: 15.9g
KV: 1800
Includes
1x RCinPOWER GTS-V3 2104 Light 1800Kv Motor (2mm T-Mount) - Teal & Pink
1x Motor Hardware
The RCinPOWER SmooX Plus 1507 2680Kv Micro Motor is built to deliver superior performance. It offers excellent thrust and stability, making it perfect for your FPV racing and freestyle experience. Gunmetal finish gives it a sleek look, making it a great addition to your FPV quads.
Check out our micro motors and all our RCinPOWER products!
Specifications
KV: 2680KV
Color: Gun Metal
No. of Cells (Lipo): 4-6S
Configuration: 9N12P
Stator Diameter: 15mm
Stator Length: 7mm
Shaft Diameter: 5mm
Idle Current(10V): 0.9A
Internal Resistance: 113mΩ
Max. Continuous Power(W): 420
Max. Current (5 Seconds): 19A
Motor Dimension(DiaxLen): 20.7x28.2mm
Weight: 16.8g ( 3cm wire)
Includes
1x RCinPOWER SmooX Plus 1507 2680Kv Micro Motor - Gunmetal
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
For all of your FPV 3D printing needs, we bring you RDQ TPU! With RDQ TPU you can expect the highest quality, rivaling top brands like Sainsmart. All 3D parts on our website that we print ourselves are printed with RDQ TPU, because reliability and durability are of the utmost importance to us and our fellow pilots! This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market.
Check out all our 3D printed accessories!
Includes
1x RDQ 1Kg TPU 95A Spool 1.75mm
Lightweight linear 90º MMCX dipole antenna, great for racing!
Check out the rest of our VTX Antennas!
Specifications
Polarity: Linear
Connector: 90º MMCX
Length: 75mm
Weight: 1.44g
Includes
1x RDQ 5.8GHz 90º MMCX Dipole FPV Antenna - Linear
Lightweight linear MMCX dipole antenna, great for racing!
Check out the rest of our VTX Antennas!
Specifications
Polarity: Linear
Connector: MMCX
Length: 65mm
Weight: 1.52g
Includes
1x RDQ 5.8GHz Straight MMCX Dipole FPV Antenna - Linear
Lightweight linear U.FL dipole antenna, great for racing!
Check out the rest of our VTX Antennas!
Specifications
Polarity: Linear
Connector: U.FL
Length: 65mm
Weight: .96g
Includes
1x RDQ 5.8GHz U.FL Dipole FPV Antenna - Linear
Keep your quads safe from the rain with the RDQ FPV Backpack Rain Fly.
The elastic band allows for easy removal or application in a pinch.
Includes
1x RDQ FPV Backpack Rainfly
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
Introducing the V3 of the RDQ backpack, following off what made the predecessors amazing, and Improving on a lot more. What we aim to deliver is a FPV focused backpack at a really low price point. This backpack comes with customizable dividers for all your FPV needs. The pack has strong nylon MOLLE webbing across the rear, sides, and even the padded shoulder straps. The V3 comes with a all blacked-out RDQ logo, more internal space, and better quality materials used.
Check out all our backpacks and cases!
The pack is covered with strong nylon MOLLE webbing across the rear, sides, and even the padded shoulder straps. Each backpack includes 3 buckle straps that can be placed anywhere on the MOLLE webbing to hold your quads and other gear. The webbing is also great for quickly attaching anything with clips, carabiners, or that pile of spare RDQ straps you've got!
The main compartment is where your goggles, transmitter, and the removable gear bag are stored. This section has three large configurable wall pieces. One with pockets perfect for Fat Shark batteries and 18650s, another with elastic loops, and a third with an extra deep cutout for your transmitter and TX module antennas to pass through. Three smaller wall pieces allow you to position everything just right.
All the gear in the main compartment is held in place even when the bag is opened upright (thanks to a transparent zippered partition). Opposite the partition are two large transparent zippered pockets. We chose a nylon reinforced material for all pockets so you don't have to worry about props and tools puncturing them. The same reinforced transparent material was used to build the removable gear bag, which is great for batteries or tools. Some testers even used it to hold their goggles. The gear bag has a zippered compartment and a carry loop of its own as well.
The outer compartment has a tool organizer with multiple slot sizes on one side and a large transparent zippered compartment for props on the other. Above the organizer is a hard lined pocket perfect for GoPros, sunglasses and other delicate items. On either side of the backpack are heavy duty expandable pockets big enough for 32oz Nalgene bottles. We replaced the original elastic mesh design in favor of a stronger material that would better allow carrying tripods. There's also a large slot in the rear for up to 17" full size laptops or loads of props!
Features & Specifications
MOLLE webbing & 3 adjustable buckle straps
Large configurable 16x12x4.5" main compartment
Transparent zippered partition
Six configurable internal walls with pockets and loops
Removable zippered 11x4x3" gear bag with two compartments
Two 12x6" and one 12x12" transparent zippered pockets
Tool organizer with 1", 2", 3" and 5" slots
Hard lined 7x3x2" sunglass / GoPro compartment
17" Laptop / Tablet / Prop holder
32oz Bottle / Tripod side pockets
Padded 3" wide shoulder straps w/ MOLLE & attachment rings
Padded carry handle
Embroidered RDQ Logo in black
RDQ Blue interior and exterior trim and zipper pulls
Includes
Includes
1x RDQ FPV Backpack V3 - Black Stealth
