CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame is composed of upper and lower carbon plates and a high-strength injection guard, which is very strong and crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; we abandoned the traditional AIO solution and adopted the split design of the F4, 30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone.
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
CineApe25 is a very cost-effective whoop FPV drone. It not only solves the worries of beginners about the high-risk factors and high threshold of assembly but also improves the after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice!
Features
Comes with high-strength one-piece injection-molded propeller guard, which has higher safety, and a stronger and more durable frame, also reduces the probability of risk, so you have more confidence to fly.
The new ducted aerodynamic design greatly optimizes power efficiency, and with the 1504-3600KV long-endurance motor, the CineApe 25 has a battery life of up to 9mins.
Compared with traditional stacks, we have treated the CineApe 25 stack with glue to protect it, which greatly reduces the risk of damage to the stack due to contact with metal particles, fine sand and gravel, weeds or dewdrops, etc.
The external Type-C parameter adjustment port is convenient for parameter adjustment.
It comes with quick-release design only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
The stack has built-in barometer and SD card slot, and reserves rich interfaces resource, which is facilitate upgrade and DIY in the future.
There are optional versions and HD VTX solutions can be provided.
Specifications
Brand: DarwinFPV
Model: CineApe 25 Cinematic FPV Drone
Frame Structure: True-X
Wheelbase: 112mm
Dimension: 160x160x43mm
Motor: 1504-3600KV
Propeller: HQProp T63MMX6
Recommend Battery: LiPo 4S 850mAh
Hovering Time: 9mins (4S 850mAh Battery)
Weight: 144g (Without Battery)
Flight Controller: F411 MPU6500 AT7456E
Reserved Connector: 1x SBUS (RX1 inverter), 2x Uarts 2x Softserial, 1x I2C, 1x RGB, 1x Buzzer, 1x USER (A15), 1x USB
ESC: BlueJay 3-4S 30A
Analog Version: CADDX ANT Analog CAM + 600mW Analog VTX
Includes
1x CineApe 25 Cinematic FPV Drone
4x HQProp T63MMX6 propeller (2L2R)
2x battery strap 10x170mm
1x EVA crashproof foam
1x EVA bottom plate shock-absorbing pad
1x Spare Screw Kit
1x Sticker
1x Manual
Darwin FPV BNF Tiny Ape Freestyle 2S 2.5" Quad is the first 2.5'' drone from Darwin fpv. Designed to meet the needs of more pilots, it comes with the Darwin F411 15A Bluejay AIO FC with integrated ELRS2.0 RX, 25-600mW VTX and RunCam Nano 4. Check out the reviews below!
Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection!
Specifications
FC&ESC：F411 1-3S 15A FC(Built-in ELRS 2.4G receiver)
Built-in Receiver Protocol: SPI ELRS 2.4G
Motor: 1103 8000KV Brushless Motor
Camera: RunCam Nano 4
VTX: 25-600mW VTX
Propeller: Gemfan 2512 3-blade propeller
AIO Firmware Target: DARWINF4SX1280HD
ESC Firmware: Bluejay_S_H_50_48_v0.14
Recommended Battery: 2S 380-450mah
Weight: 50.3g w/o battery & props
Includes
1x DarwinFPV BNF TinyApe Freestyle 2S 2.5" Quad - ELRS
DarwinFPV F411 3-6S FC is currently the cheapest in the FPV world and a direct replacement for the CineApe, designed to reduce the budget of entry-level FPV pilots as much as possible. At the same time, we have also filled the flight control with glue, which greatly reduces the risk of damage to components caused by frequent crashes by novices.
Check out our other flight controllers and our Darwin FPV products!
Specifications
Input Voltage: 3-6S
MCU: STM32F411
Gyro: MPU6500
OSD: Yes
UARTs: 2 Sets
ESC Connections: Yes
Firmware: DARWINF411
BEC: 5V
Current Sensor: Yes
Barometer: BMP280
Black Box: SD Slot
Stack Size: 30x30 / 20x20
Dimensions: 37x37mm
Includes
1x DarwinFPV F411 3-6S 30x30 / 20x20 Flight Controller
This AIO has a rating of IP67, In ideal conditions submersion of 1 meter for 30 minutes can be achieved.
Introducing the all-new DarwinFPV Hulk AIO! Having IP67 water-resistant grading, 45A BLS ESC, and Onboard ELRS SPI receiver. This AIO is ready for any adventure that you can and couldn't take your drone!!!
Check out our other AIO Flight Controllers and our Darwin FPV products!
Specifications
AIO F411
MCU: STM32F411CEU6
Gyro: MPU6500
OSD Chip: Betaflight OSD AT7456E
Blackbox: 16MB
UARTS: 5
I2C: SDA / SLA pads
LED: Yes
Beeper: Yes
Firmware Target: MATEKF405
FC Mounting Pattern: 30x30mm
Dimensions: 37x36x10.8mm
AIO ESC
Input Voltage: 2-6S
Max. Continuous Current: 45A
Max. Burst Current: 55A
MCU: EFM8BB21F16G
Current Sensor: Yes
Mounting Dimensions: 25 x 25 M2
Dimensions 46.2mm x 39.5mm x 10mm
Includes
1x Darwin FPV HULK F411/45A 3-6S AIO w/ ELRS 2.4GHz
Please attention:
Seawater is highly corrosive, it is not recommended for use in seawater. Please wash it with fresh water immediately and then dry it.
Supports a 3-6S battery, remember not to plug the battery's positive and negative interface in reverse, otherwise, it will burn out.
After receiving the AIO, first connect to a computer on Betaflight software to check whether the gyroscope and accelerometer are detected and whether the gyroscope attitude is normal.
Increase the throttle in Betaflight software to ensure the normal rotation and correct rotation direction of the 4 motors, and then install the propellers for a test flight; be sure to remove the propellers when pulling the throttle in Betaflight software to avoid accidents.
After confirming the above precautions without any problems, you can install the propellers and start flying!
Wiring Diagram
Diatone continues to impress and this time it's with a car, not quad! This 1:76 scale RC car is an ideal size for cruising around the house and finding even the smallest of gaps to roll through. If you're more into racing than flying, check out the Diatone Mouse Pad Mini Car Table Top Racing Track.
Note: This is a Discontinued Product, meaning this is the last batch of them
RTR FPV Version Available as well as Single Kart w/ FPV Cam!
The car is also compatible with FLYSKY AFHDS protocol!
Make sure to check out the rest of our Diatone gear!
Features
Off-Road Style
High Chassis, Suitable for almost all kinds of roads
New Q2 remote controller
Controllable braking function
Precise Proportional Steering
Long battery life
Three-Stage reduction gearbox design
Specifications
1:76 Q33 karting car
Body ratio: 1:76
Wheelbase: 33mm
Ground remote control distance: about 50 meters
Battery Life: about 60min
Maximum steering angle: 30°
Drive mode: proportional drive
Steering mode: proportional steering
Battery capacity: 3.7v 110mAh
Working frequency band: 2.4G
Size: 55X40 X 26mm
Weight: 19g
Diatone Q2 Remote
Working frequency band: 2.4G
Transmitting power: ≤25mW
Ground remote control distance: about 50 meters
Input Power: 1.5v AA×2
Weight: 13g
Includes
2x Q33 Karting Car
1x USB charger
1x Manual
1x Q2 car remote control
1x Spare car shell
The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro.
Check out all our 30x30 FCs and all our Diatone Gear!
Specifications
MCU: STM32F722
GYRO: IMC42688P
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3-6S Lipo
TVS Protection: Yes
BEC: 3.3V/0.5A, & 5V/3A, and 9V/3A
Mounting: 30.5x30.5mm, M3
Includes
1x Diatone Mamba DJI F722 APP MK4 30x30 Flight Controller
5x M3 ESC Isolation Dampers
5x M3 Silicone Dampers
1x 6-Pin Air Unit Cable
2x 8-Pin Cable
Wiring Diagram
Please notice：This AIO only supports Alpha and does not support BetaFlight
Alpha: https://gui.fettec.net/FC/index.html
Flight controllers that use Aphla are known to be the best for freestyling, for smoothness and reliability. Diatone is delivering on next-gen premium FPV parts, especially seen with the MK5 AIO. Capable of supporting up to 40 amps of power while working off metal mosfets, for better performance. You are going to want to put this on your next 3-4 inch freestyle ripper.
Check out all our Whoop/AIO Flight Controllers and our full Diatone collection!.
Features
Metal Mosfets
Comes with a User Manual with a Wiring Diagram
PWM: 24~128K
HD Compatible
Specification
FC Specifications
Target： Alpha
MCU: 170MHz STM32G473
GYRO: IIM-42652
OSD: Yes
Uarts: 4 Set
Motor Signal:4 Set
ESC Soft: Dshot300/600/1200/2400
Power Led: Yes
LED Controller: Yes
AIR UNIT Port: Yes
Buzz: Yes
Input: 4~6S Lipo (14.8~25.2V)
BEC Protection: Yes
Receiver Protection: Yes
TVS Protection: Yes
BEC: 10V 2A& 5V 2A
Mounting size: 25.5×25.5mm/M2
Overall dimensions: 35×34.5×6.5mm
ESC Specifications
Input: 4~6S Lipo (14.8~25.2V)f
Continue Current: 40A×4
Burst current: 45A (10S)
Target：BLHeli_32 MAMBA F40_128K
SOFT: Dshot300/600/1200/2400
PWM:24~128K
Includes
1x Diatone Mamba MK5 G4 4-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - DSHOT2400
1x High Frequency 470uF/35V
1x AIR UNIT sh1.0 connector
2x 16AWG 60mm
1x AMASS Original XT60
The perfect track for Diatone's new FPV car. Choose track A, B or grab both for never ending fun!!!
Make sure to check out the Diatone 1:76 Q33 Karting 60min RTR Kit as well as the rest of our Diatone gear!
Specifications
Dimensions: 10x47cm
Includes
1x Diatone Mouse Pad Mini Car Table Top Racing Track
Spare replacement 3in1 Cable for the DJI Digital FPV Air Unit
The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors.
See all our DJI FPV System Parts & Accessories!
Specifications
Length: 205 mm (without terminal)
Includes
1x DJI FPV Air Unit 3in1 Cable
Spare replacement Coaxial Cable for the DJI Digital FPV Camera Module and Air Unit. The coaxial cable can be quickly installed to the camera's back cover and the air unit module. Very thin coaxial cable is used with the exposed part wrapped by TPU to improve bending and wear resistance.See all our DJI FPV System Parts & Accessories!
Specifications
Length: 100 mm (without terminal, trailer card and back cover)
Includes
1x DJI FPV Air Unit Coaxial Cable
Set of spare replacement 90 Degree Elbow MMCX Antennas for the DJI Digital FPV Air Unit. LHCP antenna with MMCX joint, which is small and lightweight and ensures a long-distance transmission range and strong anti-interference. Long-distance transmission, small size, lightweight, and durable.
See all our DJI FPV System Parts & Accessories!
Specifications
VSWR<2 frequency range: 5.4GHz-6GHz, 2.75dB gain and 3dB axial ratio beamwidth at 5.8GHz
Size: 12.7 × 12.7 × 80 mm
Weight: 3.9 g
Tips
Keep the antennas of the air unit at least 40 mm apart.
Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.
The DJI FPV Air Unit is equipped with MMCX antenna ports. Since the port (the inner pin) is small, when pulling out the antenna, please hold the air unit with one hand, press the two ends of the antenna with the other hand, and remove it horizontally.
Please note that dragging the antenna directly may cause the inner pin and the collar to fall off or get damaged.
Includes
2x DJI FPV Air Unit Antenna - Elbow MMCX
*Please note that the DJI package is labelled SMA but the cable has an RP-SMA connector.
Pair of spare replacement Straight MMCX to RP-SMA Cables for the DJI Digital FPV Air Unit. Allows connection of DJI Digital FPV Air Unit SMA Antennas.
We also carry Straight MMCX to RP-SMA Cables. See all our DJI FPV System Parts & Accessories!
Specifications
Length: 83mm
Includes
2x DJI FPV Air Unit MMCX Elbow to RP-SMA Cable
*Please note that the DJI package is labelled SMA but the cable has an RP-SMA connector.
Pair of spare replacement Straight MMCX to RP-SMA Cables for the DJI Digital FPV Air Unit. Allows connection of DJI Digital FPV Air Unit SMA Antennas.
We also carry 90 Degree Elbow MMCX to RP-SMA Cables. See all our DJI FPV System Parts & Accessories!
Specifications
Length: 83mm
Includes
2x DJI FPV Air Unit MMCX Straight to RP-SMA Cable
*Please note that the DJI package is labelled SMA but the antenna has an RP-SMA connector.
Set of spare replacement RP-SMA antennas for the DJI Digital FPV Air Unit. LHCP antenna, long-distance transmission, strong anti-interference ability, SMA joint, small size, and light weight. Long-distance transmission, small size, lightweight, and durable.
These require RP-SMA to MMCX (Straight or Elbow) adapters to connector to the Air Unit.See all our DJI FPV System Parts & Accessories!
Specifications
VSWR<2 frequency range: 5.4GHz-6GHz, 2 dB gain and 3dB axial ratio beamwidth at 5.8GHz
Connector: RP-SMA
Size: 12.7 × 12.7 × 55 mm
Weight: 6 g
Tips
Keep the antennas of the air unit at least 40 mm apart.
Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.
Includes
2x DJI FPV Air Unit Antenna - RP-SMA
Spare replacement power cable for for the DJI FPV Goggles. XT60 to DC power cable connects the DJI FPV Goggles to the battery.See all our DJI FPV System Parts & Accessories!
Specifications
Length: 1.25 m
Includes
1x DJI FPV Goggles Power Cable
At last! The new DJI foam has arrived!The DJI FPV Goggles Sponge Foam Padding is a thicker and softer option for users, improving comfort and effectively blocking light.
The sponge foam padding is thinner than our PU foam padding. If you are nearsighted, we strongly suggest you use it with the DJI FPV Goggles Corrective Lenses.See all our DJI FPV System Parts & Accessories!
Features
Thick, soft material improves comfort.
Effective in blocking light.
Specifications
Material: High-Density Foam (black)
Includes
1x DJI FPV Goggles Sponge Foam Padding
Charge up to three DJI FPV Intelligent Flight Batteries with this handy charging hub!
Requires the DJI FPV AC Power Adapter to use.
Batteries not included
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Specifications
Charging Temperature: 5° to 40 °C (41° to 104° F)
Input: 25.2 V, 3.57 A
Charging Time: About 55 minutes (subject to temperature)
Includes
1x DJI FPV Battery Charging Hub
The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through a car's power socket. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature.
Compatible with the DJI FPV Battery Charging Hub
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Specifications
Charging temperature: 5°C to 40°C (41° to 104° F)
Input voltage: 14.0 V
DC output : 25.2 V 3.4 A or 25.2 V 0.8 A
Charging time (for a single battery): approx. 50 minutes
Includes
1x DJI FPV Car Charger
Prop guards for the DJI FPV Drone, easy to install and remove.
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Includes
1x DJI FPV Drone Propeller Guards
All products with batteries must be shipped by a ground shipping method.
This battery was designed specifically for the DJI FPV Goggles V2, on a full charge, it can power 110 minutes of FPV immersion!
The built-in charge indicator will keep you up to date on the battery's charge, no tester required.
Check out the DJI FPV System product line!
Specifications
DJI FPV Goggles Battery Capacity: 1800mAh
Voltage: 9 V (Max.)
Type: LIPO 2s
Charging Temperature: 0°C to 45°C
Energy: 18 Wh
Max Charging Power 10 W
Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level)
Includes
1x DJI FPV Goggles V2 Battery
For DJI Goggles 2 and Integra is an upgrade from the original foam, providing optimal comfort for any flight experience. Featuring a new and improved open nose area and thicker foam for increased fitment, this foam also ensures that no light leakage occurs. For the ultimate flight experience, the Comfyfoam is the perfect choice.
Note: This foam is meant for the DJI Goggle 2 and DJI Integra.
Check out our other FPV goggles and accessories!
Specifications
Compatible with DJI Goggles 2 and DJI Integra Goggles.
Weight: 5.6g
Includes
1x DJI Goggles 2 and Integra Super Comfy Foam Padding - Ultimate Version
This soft goggle foam will make your DJI goggles feel like a cloud on your face. They provide increased comfort, and can also help fix light leak issues. Help protect your goggles with the included cover.
The installation is simple and convenient, and the overall structure of the optimized design (the plastic bottom frame is removed, and Goggles 2 is designed with a hard plastic bottom frame to cause facial tenderness) uses skin-friendly soft materials to reduce the tenderness on both sides of the forehead when wearing. The forehead of the mask is widened and raised, and the lower cheek is thickened and raised, which improves the stability and comfort of wearing, and effectively prevents light leakage. The skin-friendly mesh fabric used in the mask is more coordinated with Goggles 2 glasses.
Check out all FPV Goggles & Accessories our DJI compatible gear!
Features
Breathable fabric-covered foam absorbs sweat and lets air circulate
Skin-friendly micro-porous synthetic fabric has an anti-allergen effect
The design of the soft pad helps eliminate light leakage
Includes
1x DJI Goggles 2 Foam Pad and Cover
This soft goggle foam will make your DJI goggles feel like a cloud on your face. They provide increased comfort, and can also help fix light leak issues. Help protect your goggles with the included cover.
The installation is simple and convenient, and the overall structure of the optimized design (the plastic bottom frame is removed, and Goggles 2 is designed with a hard plastic bottom frame to cause facial tenderness) uses skin-friendly soft materials to reduce the tenderness on both sides of the forehead when wearing. The forehead of the mask is widened and raised, and the lower cheek is thickened and raised, which improves the stability and comfort of wearing, and effectively prevents light leakage. The skin-friendly mesh fabric used in the mask is more coordinated with Goggles 2 glasses.
Check out all FPV Goggles & Accessories our DJI compatible gear!
Features
Breathable fabric-covered foam absorbs sweat and lets air circulate
Skin-friendly micro-porous synthetic fabric has an anti-allergen effect
The design of the soft pad helps eliminate light leakage
Includes
1x DJI Goggles 2 Foam Pad and Cover
Check out this FPV strap meant for your DJI Goggles 2, this strap uses velcro and elastic straps, making it easy to adjust its length and assemble and disassemble.
Note: This strap is meant for the DJI Goggle 2
Check out our other FPV goggles and accessories!
Specifications
Compatibility: DJI Goggles 2
Material: Velcro, elastic loop fabric, polyester
Weight: 35.4g
Includes
1x DJI Goggles 2 FPV Goggle Strap - Black
Check out lycra foam padding for the DJI Goggle 2, which provides comfort and light protection for all-day use. Improve your fit with this simple DJI Goggles 2 upgrade!
Note: This foam is meant for the DJI Goggle 2
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Durable Lycra foam
Thick, soft material improves comfort.
Effective in blocking light.
Specifications
Compatibility: DJI Goggles 2
Material: Lycra Foam
Includes
1x DJI Goggles 2 Lycra Foam Padding - Black
20x Sticky Pads
Introducing the Goggles 2 Replacement Sponge Foam Padding, a comfortable and highly elastic sponge designed specifically for DJI Goggles 2 users. An innovative design includes an increased height of the sponge on both sides, effectively eliminating the problem of side light leakage. The high compressibility of the sponge ensures the optimal distance between the lens and the eyes, resulting in clear images and text. The sponge's increased height at the bottom also provides ample space for the nose, distributing the weight of the goggles evenly across the face instead of the nose.
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Specifications
Compatibility: DJI Goggles 2
Includes
1x DJI Goggles 2 Max Comfort Sponge Foam Padding - Grey
This Sponge Foam Padding for the DJI Goggle 2 provides comfort and light protection for all-day use. The skin-friendly mesh fabric liner and durable sponge foam material are durable and lightweight. Improve your fit with this simple DJI Goggles 2 upgrade!
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Durable sponge foam
Black in color
Specifications
Dimensions: 7.2 x 2.9 x 1.35 inches
Compatibility: DJI Goggles 2
Weight: .03
Includes
1x Sponge Foam Padding for DJI Goggles 2
10x Sticky Pads
DJI O3 Air Unit - Go the Distance
State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!
Enjoy flagship video streaming
Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI's flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience!
Built-in 1080p micro OLED screens
Get even more realism on your next flight. DJI Goggles 2 are equipped with two HD micro OLED screens, which are distinguished by a refresh rate of up to 100Hz and guarantee incredible clarity. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don't end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers.
Features:
DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.
Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).
Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.
Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.
Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft.
Specifications:
Camera:
Matrix: 1/1.7" CMOS Effective Pixels: 48MP
Lens: Field of View (FOV): 155° Equivalent Focal Length: 12.7mm Focal Length: 2.34mm Aperture: f/2.8 Focus Mode: FF Focus Range: 0.6m to ∞.
ISO range: 100-6400 (Auto) 100-25600 (Manual)
Snapshot: Roll Shutter
Field of View (FOV): 155°
Video resolution:
With DJI Goggles 2: 4K @ 50/60FPS 2.7K @ 50/60/100FPS 1080p @ 50/60/100FPS
With DJI FPV Goggles V2: 4K @ 50/60FPS 2.7K @ 50/60/100/120FPS @ 1080p 50/60/100/120FPS
Video Format: MP4
Electronic Image Stabilization (EIS): The product supports RockSteady technology.
Weight: 8.3g (including coaxial cable)
Air Unit Module:
Weight:
Air Unit (without Camera Unit): Approx. 28g
Air Unit (including Camera Unit): Approx. 36.4g
Antenna: Approx. 3g
Dimensions (L x W x H):
Transmission module: 32.5 x 30.5 x 14.5mm (L x W x H)
Camera module: 21.2 x 20 x 19.5mm (L x W x H)
Coaxial cable: 115mm (length )
3-in-1 cable: 100mm (length)
Antenna: 85mm (length)
Communication frequency:
2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX)
Transmission power (EIRP): FCC: <33dBm CE: <14dBm SRRC: <30dBm
Live view quality and end delay:
With DJI FPV Goggles V2: 810p/120FPS video transmission quality: less than 28ms latency. 810p/60FPS video streaming quality: less than 40ms latency.
With DJI Goggles 2: 1080p/60FPS video streaming quality: less than 30ms latency. 1080p/60FPS video streaming quality: less than 40ms latency.
Video Transmission Range: 10km (FCC), 2km (CE), 6km (SRRC)
Flight controller software supported: Compatibility with flight controller software that supports Betaflight. Please see the product FAQ for more information.
Input Voltage: 7.4-26.4V
Working temperature: -10°C to 40°C (14°F to 104°F)
Channels: Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels;
Channel information: FCC / SRRC / CE: 40 MHz: Ch 1: 5794.5 MHz 20 MHz / 10 MHz: Ch 1: 5768.5 MHz Ch 2: 5804.5 MHz Ch 3: 5839.5 MHz
Supported SD cards: MicroSD (up to 256GB)
Recommended MicroSD cards:
SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go! Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC
DJI Goggles supported: DJI Goggles 2 and DJI FPV Goggles V2
Supported DJI remote controllers: DJI FPV Remote Controller 2
Tips
Using DJI Goggles 2 and tested in an outdoor open environment without interference.
The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps; the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.
Includes:
1x DJI O3 Air Unit Camera Module
1x DJI O3 Air Unit Transmission Module
1x DJI O3 Air Unit Antenna
1x DJI O3 Air Unit 3-in-1 Cable
Tired of damaging your wing every time you come in to land? Worry no more with these protective skids for your FPV wing! Designed specifically to protect the wing tips and tail. These are sure to increase the life of your craft.
Check out all of our wing hardware and all our DU-BRO products!
Includes
2x DU-BRO Skid for Wing Tips or Tail
Don't strain your eyes from struggling to see a tiny screen. Go big with the Eachine 5.8G 40CH 7 Inch FPV Monitor with DVR! Featuring an integrated folding sunshade, diversity receivers, DVR and internal battery. This is an ideal display if you want to spectate other pilots or just fly FPV without goggles on your face!
Check out the rest of our FPV monitors!
Features
DVR
Dual buffered AV outputs
Not affect by 2.4GHz R/C Radios
AV Receiver with Diversity inputs
Small, light weight, durable
5 Bands and total 40 Channels
Built-in battery, easy to carry and outdoor use
Automatic signal search
Simple operation
Work status OSD display
Specifications
Screen size: 7”
Screen type: TFT LCD Screen/long life, LED backlight
Resolution: 800*480
Brightness: 600cd/m2
View Angle: 140/120degree (Horizontal/Vertical)
Size: 180mm x 120mm x 25mm(Note:Sunshield height:110mm)
Working Voltage: DC 7~16V
Power Consumption: max 650 mA @12V
Battery charging current: 850mA @12V ( max )
Working temperature: -10℃~+ 65 ℃
Connectors: RP-SMA female(outer needle)
Antennas Connectors: RP-SMA male (inner hole)
Storage: Support up to 32G , C10 SD Card
Includes
1x Eachine LCD5802D 5.8G 40CH FPV Monitor w/ Internal Battery - 7"
2x 5.8G Antenna
1x AV Cable
1x Charger
Highest performance, smallest size, lightest weight - that is what the EMax Bullet 30 amp ESC offers. At a mere 3.9g (nearly half the weight of the closest competitor), and measuring 11.9 x 19.6mm, this ESC is TINY.
This ESC is capable of running all major protocols, including DShot 600, 300, and 150, and Multishot, and Oneshot 42/125. It comes pre-loaded with BLHeli 16.5, meaning you're ready to run out of the box.
Check out our ESC selection !
Features
The market's lightest and smallest ESC, designed specifically for high-level FPV racing.
Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.
Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125.
Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency.
New aluminum heat sink, offers protection from propeller strike damage.
Features high-temperature silicone signal cable for wire flexibility and ease of installation.
Specifications
Con.Current: 30A
Input Voltage: 2-4S
Weight: 3g
Includes
1x EMAX Bullet 2-4S DShot600 30A ESC
EMAX produces some of the most reliable, best value servos around. We carry several varieties for different sized aircraft.
The ES 3054 is powerful and fast for it's size. Get this quality servo from E-MAX to build your next FPV project!
Check out all our Servos & Accessories and all our EMAX gear!
Features
Metal Gears for ultimate reliability
Digital for the smoothest operation
Specifications
Operations Voltage: 4.8-6.0C
Direction: Counter Clockwise / Pulse Traveling 1500 to 1900 μ sec
Stall Torque at 4.8V: 3kg/cm max
Stall Torque at 6.0V: 3.5kg/cm max
Speed at 4.8V: 0.15 sec/60* (zero load)
Speed at 6.0V: 0.13 sec/60* (zero load)
Size: ~28.5x13x31mm
Weight: 17g class, 20.1g actual
Plug: JR
Cable Length: ~240mm
Head Splines: 23T
Maximum Travel: ~145*
Gears: Metal
Operation: Digital
Includes
1x EMAX ES3054 Servo
3x Plastic Servo Horns
1x Mounting Hardware Set
All items with batteries must be shipped by a ground shipping method.
The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!
2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos:
1S 450mAh - PH2.0
2S 300mAh - PH2.0
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!
Specifications
Frame
Wheelbase: 75mm
Dry Weight: 31.2g
All Up Weight: 43.5g with 1x 450mAh 1S battery
Frame Material: Polypropylene
Motors
Stator Size: 0802
Kv: 16000kv
Propeller Mount: Push-On Avan TH-style
Propeller: Avan Turtlemode 4-Blade
All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)
Battery Connector: JST-PH2.0
FPV System
VTX Power: 25/100/200mw Switchable
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
Includes
1x Tinyhawk II FPV Racing Drone
1x EMAX Transporter 5.8G FPV Goggles
1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging
1x EMAX E6 Transmitter
1x EMAX 450mAh 1S HV Battery
1x EMAX 300mAh 2S HV Battery
2x CCW + 2x CW Spare Props
1x 1S-2S USB LiPo Charger
1x Screwdriver + Hardware Kit
1x Micro USB Charging Cable
1x Faux Carbon Fiber Carrying Case
Transporter 2 FPV Goggle features a detachable screen which can optionally be paired to the E8 Transmitter, allowing pilots to customize their flying experience to suit their needs. Built into the Transporter 2 is a powerful receiver in order to give pilots the cleanest video feed possible while also featuring a built-in DVR, allowing users to record their FPV flights for review, or sharing flight footage with others.
Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!
Specifications
Charging System: Built-in USB 5V--1A linear li-ion battery charging system
Dimensions: (w/o antenna + collasped) 155x100x90mm
Frequency: 5.8GHz（5658MHz-5945MHz)
Video Recording Settings: VGA/D1/HD (Off/3min/5min/10min)
DVR: 32GB SD card (max), MJPEG, AVI
Battery: 1300mAh Lithium-ion battery
Resolution: 480X800
Weight: 398g
Operating Voltage: 4.2V-3.7V
Screen size: 4.3 inch
Includes
1x EMAX Transporter 2 5.8GHz FPV Goggles w/ DVR & Removable Screen
As the next generation of FPV pilots comes to fruition, the EMAX engineers have created the ultimate introductory goggle for the digital HD quality experience.
Designed in collaboration with HDZero, the EMAX Transporter II HD boasts a bright, sharp, high definition resolution display compatible with HDZero's open source wireless transmission protocol, offering ultra low-latency video feeds for FPV racing needs. Utilizing a DVR system, recording HD quality videos of your flights for sharing with friends or social media online has never been easier which opens up a way to show your experiences with everyone.
Engineered to be a removable display, customizing the way you fly has become standard. From being held on a tripod stand utilizing the mount, to being attached to the EMAX E8 transmitter, the Transporter II HD is designed with every pilot and way of flying in mind.
Built into the Transporter II HD is a USB-C port offering a standard power input for pilots to power their goggles with any power USB source from wall chargers to mobile battery packs. Integrated into the display is a powerful backup battery designed to keep pilots in the air, even when other power sources run dry.
The EMAX Transporter II HD is the forefront of HD FPV innovation and growth, opening up a brand new technology to everyone.
Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!
Features
Specifications
Dimensions: 95mm x 155mm x 84mm
Weight: 411g (In goggle mode w/ antennas + strap)
Display: 4.5” 720P 60Hz TFT
USB-C Power Input: 5V 2A USB recommended
Built-In Battery: 2200mAh LiPo
Tripod Mount: 1/4“-20 Standard Tripod
SD Card Slot: MicroSD (Supports up to 64GB)
Includes
1x EMAX Transporter 2 HD FPV Goggles/Monitor w/ DVR For HDZero
The EV800D has given those looking for a set of goggles with a 800x480 5'' screen, DVR and a built-in battery a great option for an amazing value!
Check out our selection of FPV Goggles and Accessories!
Features
Bright 800x480 5" LCD Screen specially tuned for FPV racing
Separable design. Screen can be used as small monitor on radio controller or with tripod!
92% Transparent 3x Lens boosts the video to give you that immersive view
Super-wide viewing angle up to 82
True Diversity: 2x Super Sensitive (-90dB) RX5808 PRO modules
40 Channels with Race Band (See Frequency Chart Below)
Advanced auto-search function and the working frequency show on screen
Great performance when two types (Linear and Omni) of antenna are used.
Build in DVR records up to 720x576 full frame rate video with no frame loss (Class 10 card required)
Two system (Display/Record duo core separated chipsets) ensure no delay in displaying and no frame lost in recording (please use C10 super speed card to ensure the full frame recording)
Replay in your videos in the Goggle Menu
Friendly unintrusive OSD. No blocking of important flying OSD information.
Three-way Adjustable Head Strap
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time.
Specifications
Screen Size: 5"
Screen Resolution: 800x480 (No blur after enlarge by the lens)
Screen Brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
Ratio: 16:9, 4:3
View Angle: 140/120 degree(Horizontal/Vertical)
RF Modules: 2x (-90dB) RX5808 PRO modules
Battery: Built-in 7.4V 1200mAh Battery
Input Voltage: 10-22V typical recharging voltage is 12V, 2S or 3S (7.4V-11.1V) LiPo can be used as back up power to have long working time.
Antenna Connection: SMA
Charger : 12V,2A, DC 2.5mm
Dimension: 180*145*82mm
Weight: 362g without antenna
Includes
1x EV800D 5.8GHz 40CH Diversity FPV Goggles with DVR
1x Charger
1x 5.8G Half-Planar Antenna with SMA Connector
1x 5.8G RHCP Cloverleaf Antenna with SMA Connector
1x AV In Cable
1x DC power cable to 3S balancer plug cable
1x EVA Carrying Case
1x Instruction manual (English)
The Fat Shark Dominator returns. This FPV Drone goggle features high-fidelity FullHD OLED displays and supports a new 1080p video transmission protocol in a compact design. A wide range of IPD and focus adjustments allows the user to tune the optics for any eye. The Dominator comprises premium features such as USB-C Video out, HD DVR recording, and an intuitive full color graphic user interface. Support for Betaflight Canvas Mode lets you control the on-screen display. The Dominator is the new standard for premium FPV.
HD VTX Available here!
Check out all our FPV Goggles, and our FatShark gear selection!
Features
HD Video Output via USB-C Connector
Supports Betaflight Canvas Mode
Integrated HD DVR
Adjustable Anti-Fog Ventilation
Customizable Fit with Optional Faceplate Pad Accessories
On/Off Power Button
Specifications
OPTIC ENGINE
Field of View (FOV): 46°
Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)
Adjustable Focus Range: +2 to -6 diopter
MICRO DISPLAYS
Full HD 1080p OLED Dual Micro Displays
INPUT VOLTAGE: 7-21V (2S-5S)
Includes
1x Fat Shark Dominator HD FPV Goggles
1x Carry Case
1x XT60 Power Cable
1x Goggle Strap
1x Lens Cleaning Cloth
***MONEY BACK GUARANTEED FROM FATSHARK
The 2.1 Version now has a twist focus design unlike the 2.0 with its original separate focus wheel system.
The Dominator HDO2.1 headset launches as the successor to the much-loved Dominator HDO. The HDO2.1 uses big 1280 x 960 OLED panels to provide a dramatically improved image with a 46-degree field of view. Display customization is now possible using a new OSD with expanded controls. The HDO2.1 can be further personalized with adjustable focus, adjustable IPD, adjustable face plate curvature, selectable image ratio, and a configurable power button. The HDO2.1 is the perfect headset for an experienced pilot looking for the best flight experience.
Check out all our FPV Goggles, and our FatShark gear selection!
Specifications
Optics:
FOV (field of view): 46 degrees diagonal
IPD (interpupillary distance): 54 to 74 mm (adjustable)
Focus: +2 to -6 diopters (adjustable)
Display:
Two Sony 0.5” OLED displays
Resolution 1280 x 960
NTCS/PAL auto selecting
AV Mode 4:3
AV Mode 16:9
HDMI Mode 16:9
Audio:
Stereo
User Controls:
Channel Selection
Volume Control
Mode Selection
Display Control (Brightness and Contrast)
DVR Control
Power Button / Fan Control
Electrical:
Power Supply: 7 – 13V input voltage (2S – 3S Supply)
Power Consumption: TBD
Analog DVR: MicroSD support to 32 GB
Record Rate: 6Mbps (MJPG compression, 30 fps, AVI)
File playback (native recording, no codec support)
Upgradeable via SD card
Battery:
7.4V, 1.8A 18650 Battery Case (optional))
Interface:
3.5mm AV in/out port
Power input port
3.5mm 3p earphone port
MicroSD
RF Module Bay
HT connector 3 pin internal connection
Power Button
Mechanical:
Ergonomic molded headset w/ adjustable headband
Dimensions: 169.2 x 80 x 45.5 mm
Weight: 206.8 g
Includes
1x Fat Shark HDO2.1 Goggles
1x Fat Shark 18650 Battery Case
1x Zippered Carry Case
The Fat Shark Recon HD’s unparalleled image quality is achieved with a 1080p display viewed through Fat Shark’s patented folded optical engine. The 4” panel delivers a crisp 44-degree FOV image at 60 fps with compatibility with WalkSnail transmitters. Recon retains a reputation as a high-performance goggle at an affordable price while maintaining anti-fog fan features, a comfortable form factor, and glasses accommodating faceplate.
Features
Ergonomically Molded Headset w/ Adjustable Headband
4 Internal Wide Beam Width Directional Antennas
Positive Upgradeable via SD Card
5-Way OSD Button Navigation
1920x1080 TFT 4" Display
DVR Record Button
Black Menu Button
44° Diagonal FOV
USB-C Video Out
Specifications
Power Supply: 5.1mm Barrel Connector, 7-21V (2S-5S) Center Pin
RF: 4 Internal Wide Beam Width Directional Antennas
Inter-Pupillary Distance (IPD): 55 - 76mm (fixed)
Operating Frequencies: 5.725-5.850GHz
Package Size: 517g, 180 x 128 x 98mm
Positive Upgradeable: via SD Card
Field of View (FOV): 44° Diagonal
Dimensions: 170 x 120 x 90mm
OSD Navigation: 5-Way Button
4 Inch TFT (1920 X 1080)
Record Button: DVR
Menu Button: Back
Memory: MicroSD
Video Out: USB-C
Weight: 336.5 g
Includes
1x Fat Shark Recon HD FPV Goggles
1x Lens Cleaning Cloth
1x Goggle Strap
1x Power Cable
When your foam gets all gritty and beat up from a long day of showing your packs who the boss is, sometimes its just time to change them out because dryer sheets will only get you so far. Get that new goggle feeling with this set from Fat Shark! With 6 foams at this amazing price, every pilot who uses goggles should have a backup...
These are designed to fit the Fat Shark Dominator and Attitude series of FPV Goggles.
The Ultimate Fit Kit for the Fat Shark Dominator and Attitude series of goggles has everything needed for long term fit and comfort. The velcro is new and much better than the adhesive backed foam that came with the older models. When using those updated models, the foam will not come apart. It doesn`t bow up and compress as much as those old foam. It has a much better fit and foam than before.
Features
Foam is easily removed and adjusted.
Include everything you needed for long term fit and comfort.
Works with all fat shark faceplate model, such as FSV2617, FSV2618.
Same as the set that comes with your goggles, you can wear through the set eventually.
This is the direct replacement in fatshark packaging.
Includes
2x Thin foams
2x Thick foams
1x Vinyl-covered foam
1x Velcro base for foam attachment
All batteries must be shipped by a ground shipping method.
The Scout is the newest Fat Shark product family. It is the culmination of years of work to design a high-performance google at an entry level price. The Scout uses a patented panel goggle optical module to deliver a 50 degree field of view (FOV), 1136 x 640 resolution and a 60 fps refresh rate in a comfortable to wear headset. In addition to an impressive display, the Scout has completely overhauled electronics performance. It has a diversity RX with an embedded 10 dB patch antenna to maximize reception, an overhauled OSD, an updated DVR, and simple USB charging. The Scout also has several user conveniences including an embedded fan, removable foam to allow for pilots to wear glasses while flying and even an LED indicator on the antenna to provide channel notification. The Scout is the headset for aspiring pilots that don’t want to upgrade for a long time or a second headset for those that are used to premium performance.
Check out the rest of our FPV Goggles and Accessories!
Specifications
FOV (field of view): 50 degrees diagonal
Type: Plastic optics
Display: 4.0 inch
Resolution 1136 X 640
NTCS/PAL auto selecting
Audio: Stereo
User Controls: Channel Selection, Band Selection, Display Control, Volume Control, Beep Control, RX set, Fan Control, Clock set
Mode Selection (RX/AV/AUX)
DVR Control
Power Supply: Standard 18650 Li-ion battery
RF Modules: Infinite channel support on multiple bands
Analog DVR: MicroSD support to 64 GB
Record Rate: 6Mbps (MJPG compression, 60 fps, MOV)
File playback (native recording, no codec support)
Upgradeable via SD card
Battery: 3.7V, 2600mAh (18650 cell)
Interface: 3.5mm AV in port
3.5mm 3p earphone port
MicroSD
USB-C
AUX port
Includes
1x FatShark SCOUT headset
1x 5.8Ghz omni antenna
1x Omni Antenna LED Ring
1x5G8 Patch Antenna (built-in headset)
1x18650 2600mAh Battery(built-in headset)
The ultimate strap upgrade for your goggles! FatStraps are comfortable, durable, and available in an array of different styles.
Be sure to choose the right version for your goggles:
Analog (Closed End Loops) for Fatshark Analog
HD Thick (Snap End Loops) for DJI FPV, Walksnail Avatar, Fatshark Dominator HD
HD Thin (Snap End Loops) for DJI Goggles 2 & HDZero
(note that HD Thin straps should fit all the HD Thick strap goggles)
All FatStraps are made in the USA from high quality durable components, and the Military Grade straps are especially tough. The FatShark version has a stationary battery pouch sewn into the right side that perfectly holds your goggle battery or 18650 case. The DJI version has a removable sliding elastic section that allows you to mount your battery anywhere along the strap, or in your pocket. The material, fittings, and stitching on these straps are all top notch. More styles on the way!Check out all our FPV goggles & accessories!
Includes
1x Fat Straps 2" FPV Goggle Strap for Fatshark, Walksnail or DJI - Choose Your Style
Introducing the new FETtec Motor FM2004T 1800kv FPV Drone Motors. Not are they only fast but they're also meant to be durable and smooth. Step up your FETtec build with these amazing motors!!
Check out our other motors and all of our FETtec products!
Specifications
Kv: 1800Kv
Prop Shaft Diameter: 1.5mm
Rated Voltage: 4-6S
Config: 12N14P
Stator Dimension: 2004
Mounting Pattern: 12mmΦ
Shaft Diameter: 1.5mm
Weight: 17g
Includes
1x FETtec Motor FM2004T 1800kv Motor
Canopy not included. This is the body plate only, with hardware.
The TinyTrainer was developed for Evan “Headsup” Turner to train for the DRL season in his own backyard. This frame was a key instrument in making a 2-time world champion racer. The flight characteristics of this drone result in a racing experience only found in the PRO FPV racing leagues.
Check out all our FIVE33 Frames & Accessories and FIVE33 Flying Gear!
Note: To make this a complete frame kit for everything you need to fly, you must purchase: FIVE33 TinyTrainer Canopy and the FIVE33 TinyTrainer TPU Kit.
Features
The frame supports 16 x 16 stacks and 25 mm toothpick AIO boards
Supports both 9mm and 12mm mounting pattern motors.
3mm Carbon Frame
Specifications
Carbon Fiber Thickness: 3mm
Size: 3"
3D Prints
3D Parts File
Includes
1x FIVE33 TinyTrainer Body Plate w/ Hardware
1x Tiny Trainer 3mm Carbon Frame
1x TPU Parts Set (Cam Mount, Battery Tray, Fin, VTX mount)
1x Poly-carbonate canopy
8x 6 mm M2 Button Head Hex Drive Screw
4x 16 mm M2 Button Head Hex Drive Screw
8x M2 nylon Nuts
4x 16 mm M2 Standoffs
8x 4″ Nylon Cable Ties
High performance, small size, light weight - that is what the Flycolor Raptor 5 series have to offer. Flycolor Raptor 5 ECS's by Flycolor is perfect for fixed-wing RC Drones! Choose your Amp, from a range of 20A, and 35A.
Check out our Individual ESC selection and all our Flycolor Products!
Features
ARM 32-bit Cortex MCU STM32G071, frequency up to 64 MHZ, 25% higher than the previous generation of MCU.
Compared with the previous generation of ESC, it has better routing and component layout.
Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input signal is automatically detected by the ESC upon power up.
Features high-temperature silicone signal cable for wire flexibility and ease of installation.
The silicone twisted-pair of throttle signal cable, increases the service life and effectively reduces the crosstalk caused by signal transmission, and makes flight more stable.
Specifications
20A
Model: Raptor5 G071-20A
Battery: 3-6S
Con. Current: 20A
Burst Current(10S): 25A
BEC: No
Weight: 6.5g
Size: 29x14x6mm
Firmware: Flycolor_Raptor_5
Typical Applications: FPV
35A
Model: Raptor5 G071-35A
Battery: 3-6S
Con. Current
Burst Current(10S)
BEC: No
Weight: 6.5g
Size: 29x14x6mm
Firmware: Flycolor_Raptor_5
Typical Applications: FPV
50A
Model: Raptor5 G071-50A
Battery: 3-6S
Con. Current 50A
Burst Current(10S): 60A
BEC: No
Weight: 10.2g
Size: 33x16x6mm
Firmware: Flycolor_Raptor_5
Typical Applications: FPV
Includes
1x Flycolor Raptor 5 3-6s Individual ESC - Choose your Amp
Wiring Diagram
The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20!
Check out all our 20x20 ESCs and all our Flycolor Products!
FEATURES
ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
PWM frequency up to 128K, high frequency for higher throttle makes
running smoother.
Compared with the previous generation of ESC, the ESC firmware is
optimized, making the throttle linearity smoother and the response faster.
Miniaturized and lightweight design, better routing, and component layout.
20x20 mounting holes to meet the installation requirements of diversified
frames.
Built-in current sensor and VBAT output.
Supports regular 1-2ms pulse width input, as well as Oneshot125
(125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input
signal is automatically detected by the ESC upon power-up.
All Dshot and Proshot signals are supported.
Damped light does regenerative braking, causing very fast motor
retardation, and inherently also does active freewheeling.
Supports higher power load, more suitable for violent flight of racing drones.
Conformal coating for extra protection
Large soldering tabs
Low ESR capacitor and XT60 cable included
Specification
Model: Flycolor TRINX G20
Con. Current: 60A
Burst Current: 70A (10s)
BEC: No BEC
LiPo cells: 3-6S
Weight: 14.4g
Size: 44x36x6.3mm
Mounting: 20x20mm,M3
Configurator: BLHeliSuite32
Firmware: Flycolor_Raptor_5
Includes
1x Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC
4x Silicone vibration absorber
5x O-Ring
1x Power cable+XT60
1x FC/ESC connecting wire
1x Low ESR capacitor
1x Aluminum heat sink
