The Emax RSIII motor is rated at 2306, which is a classic stator size for racing and freestyle, and works off 2500Kv, which is ideal for 4S 5" quads.
Behold the RS3 (Race Spec III) motor from EMAX—The perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 4S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations. Get ready to experience unimaginable speed, total precision, and unmatched endurance—The RSIII is ready to revolutionize the racing circuit!
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
Precision bearing
Titanium alloy shaft
Anodizing
16x16mm hole pattern
Multi-strand winding
120mm 20 AWG silicone wire
Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor.
While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make.
The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.
Specifications
Framework: 12N14P
Length: 32mm
Diameter: 27.3mm
No.of cells: 3-4S 2500Kv
Propeller: 5"-5.5"
Weight: 27.7g(W/O Silicone Wire) 2500Kv
Prop adapter shaft thread: M5
Bearing Shaft: 4mm
Shaft Thread: CW
Lead: 20#AWG 120mm
Idle Current (10V): 1.8A
Internal Resistance: 43mΩ
Peak Current (6S): 43A
Max Power (6S): 720W
Includes
1x Emax RSIII Series 2306 2500Kv Motor
5x M3x8 Screw
5x M3x7 Screw
5x M3x6 Screw
1x Aluminum M5 nylock nut
1x Washer and Screw for shaft
All items with batteries must be shipped by a ground shipping method.
The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!
2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos:
1S 450mAh - PH2.0
2S 300mAh - PH2.0
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!
Specifications
Frame
Wheelbase: 75mm
Dry Weight: 31.2g
All Up Weight: 43.5g with 1x 450mAh 1S battery
Frame Material: Polypropylene
Motors
Stator Size: 0802
Kv: 16000kv
Propeller Mount: Push-On Avan TH-style
Propeller: Avan Turtlemode 4-Blade
All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)
Battery Connector: JST-PH2.0
FPV System
VTX Power: 25/100/200mw Switchable
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
Includes
1x Tinyhawk II FPV Racing Drone
1x EMAX Transporter 5.8G FPV Goggles
1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging
1x EMAX E6 Transmitter
1x EMAX 450mAh 1S HV Battery
1x EMAX 300mAh 2S HV Battery
2x CCW + 2x CW Spare Props
1x 1S-2S USB LiPo Charger
1x Screwdriver + Hardware Kit
1x Micro USB Charging Cable
1x Faux Carbon Fiber Carrying Case
With the success of the Avan Scimitar 4 and 5 inch propellers, EMAX sought out to release a unique prop into the industry that will encourage pilots to build with new motor and prop combinations.
This is a replacement prop for the BabyHawk II HD!
Be sure to check our 3" props, 4" props, and all our EMAX gear!
Specifications
Diameter: 3.5"
Pitch: 2.8"
Blades: 3
Material: Polycarbonate
Weight: 1.9g
Includes
4x EMAX Scimitar 3.5x2.8x3 Tri-Blade 3.5" Prop (2 CW, 2 CCW)
Spare replacement part for the EMAX Tinyhawk Freestyle.
Check out the rest of our TinyHawk Series Parts & Accessories and all our EMAX gear!
Specifications
Size: 1103 KV 7000kv
Mounting Hole: M2 8mm 3 hole pattern.
Center Hole clearing: 5mm
Prop Mount: T mount
Wire: Silicone Wire 26 AWG
Includes
1x EMAX TH1103 7000Kv Motor
This is a replacement motor for the Emax Nanohawk X.
This motor also be used on 2-3" builds!
Check out our other Nanohawk X accessories, and all our EMAX selection!
Specifications
Kv: 11000Kv
Input Voltage: 1S LiPo
Motor Dimensions: Φ15mm x 16mm
Stator Dimensions: Φ12mm x 025mm
Shaft Diameter: 1.5mm
Mounting Pattern: Φ9mm
Weight (w/ wires): 4.5g
Includes
1x EMAX TH 1202.5 11000Kv Motor
Replacement all-in-one flight controller and ESC for the Tinyhawk 3. Standard 26x26 whoop mounting pattern for DIY builds.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
1x EMAX Tinyhawk III 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
Replacement set of Avia TH propellers for the Tinyhawk 3.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
EMAX Tinyhawk III Avia Props 4 pack - RED
Replacement Tinyhawk 3 frame that includes all plastic pieces necessary to freshen up your model.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
EMAX Tinyhawk III - Frame
Replacement Tinyhawk 3 hardware kit that includes a complete hardware set for your model including spares and rubber bands.
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
EMAX Tinyhawk III - Hardware Kit
All batteries must be shipped by a ground shipping method.
The Tinyhawk 1s lipo battery is a big part of the whole design around the great flight performance of the Tiny Hawk. The weight, the size, and the power from the High Voltage 450mah capacity cell were all considered during the design process. Engineers tested countless hours of flight and performance to achieve the best Lipo battery for you to enjoy up to 4 minutes of flying time!
Our pilots agree that at least 4-6 batteries will be required to have the best flying experience for an all day fun fly!
Required charger type: Any charger that has 4.35 High Voltage capabilities. This will keep you flying for up to 4 minutes per charge.
Be sure to check out our all micro packs, and all our EMAX gear!
Specifications
Voltage: 1S 4.35V HV
Capacity: 450 mAh
Discharge rating: 80c/160c
Connector: PH2.0
Includes
1x EMAX TinyHawk 3.8V 1S 450mAh LiHV Whoop/Micro Battery - PH2.0
Replacement part for the TinyHawk II Race.
Check out all our TinyHawk parts, and EMAX gear!
Specifications
Image Sensor: 1/3" CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm M8
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control: Auto
Min. Illumination: 0.01 LUX
WDR: Auto
Day/Night: Color
Input Voltage: 3-5.5V
Current: 110mA @ 5V
Housing Material: ABS
Net Weight: 3.2g
Dimensions: 16x14x14mm
Includes
1x EMAX TinyHawk II Race Replacement Camera - Runcam Nano 2
Transporter 2 FPV Goggle features a detachable screen which can optionally be paired to the E8 Transmitter, allowing pilots to customize their flying experience to suit their needs. Built into the Transporter 2 is a powerful receiver in order to give pilots the cleanest video feed possible while also featuring a built-in DVR, allowing users to record their FPV flights for review, or sharing flight footage with others.
Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!
Specifications
Charging System: Built-in USB 5V--1A linear li-ion battery charging system
Dimensions: (w/o antenna + collasped) 155x100x90mm
Frequency: 5.8GHz（5658MHz-5945MHz)
Video Recording Settings: VGA/D1/HD (Off/3min/5min/10min)
DVR: 32GB SD card (max), MJPEG, AVI
Battery: 1300mAh Lithium-ion battery
Resolution: 480X800
Weight: 398g
Operating Voltage: 4.2V-3.7V
Screen size: 4.3 inch
Includes
1x EMAX Transporter 2 5.8GHz FPV Goggles w/ DVR & Removable Screen
As the next generation of FPV pilots comes to fruition, the EMAX engineers have created the ultimate introductory goggle for the digital HD quality experience.
Designed in collaboration with HDZero, the EMAX Transporter II HD boasts a bright, sharp, high definition resolution display compatible with HDZero's open source wireless transmission protocol, offering ultra low-latency video feeds for FPV racing needs. Utilizing a DVR system, recording HD quality videos of your flights for sharing with friends or social media online has never been easier which opens up a way to show your experiences with everyone.
Engineered to be a removable display, customizing the way you fly has become standard. From being held on a tripod stand utilizing the mount, to being attached to the EMAX E8 transmitter, the Transporter II HD is designed with every pilot and way of flying in mind.
Built into the Transporter II HD is a USB-C port offering a standard power input for pilots to power their goggles with any power USB source from wall chargers to mobile battery packs. Integrated into the display is a powerful backup battery designed to keep pilots in the air, even when other power sources run dry.
The EMAX Transporter II HD is the forefront of HD FPV innovation and growth, opening up a brand new technology to everyone.
Check out the rest of our EMAX products and selection of FPV Goggles and Accessories!
Features
Specifications
Dimensions: 95mm x 155mm x 84mm
Weight: 411g (In goggle mode w/ antennas + strap)
Display: 4.5” 720P 60Hz TFT
USB-C Power Input: 5V 2A USB recommended
Built-In Battery: 2200mAh LiPo
Tripod Mount: 1/4“-20 Standard Tripod
SD Card Slot: MicroSD (Supports up to 64GB)
Includes
1x EMAX Transporter 2 HD FPV Goggles/Monitor w/ DVR For HDZero
For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog the four mainstream video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 Air Unit shooting, which can achieve an excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
Find the recommended 4S 450-750mAh batteries here!
Check out our other pre-built quads, as well as the rest of our GEPRC selection.
Features
Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning.
2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.
Specifications
Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ Walksnail Avatar & Micro Cam - ELRS 2.4GHz
Frame: GEP-CL20
Wheelbase: 100mm
Gimbal plate: 2.0mm
Top plate: 2.5mm
Bottom plate: 1.5mm
FC system: GEP-F411-35A AIO
MCU: STM32F411CEU6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 35A
VTX: GEPRC 5.8GHz@600mW
Camera: Caddx Ratel2
Antenna: GEPRC Peano 5.8G RHCP MMCX
Motor: GR1303.5 5500KV
Propeller: EMAX Avan Micro 2×2.4×4
Receiver: ELRS2.4G
Recommended battery: LiHv 4S 450mah-660mah
Flight time: 4-6min
Includes
1x CineLog20 Analog
2x 2-inch propellers (pairs)
1x Naked GoPro Base
2x M15×150mm battery strap
2x Battery Silicone Pads
2x EVA Landing Pads
1x Set of screws
1x L-shaped screwdriver (1.5mm)
1x Antenna fixed tube
1x 4S Naked GoPro power cable (with balanced terminal head)
2x EVA damping rings of guards
1x TBS Antenna mount (Vertical Type)
1x TBS Antenna mount (Horizontal Type)
1x TBS Antenna printed parts
The screw package includes:
3x M2×12mm cup head screws
2x M2×5mm round head screws
1x M2×8mm round head screw with pad
3x M2×7mm round head screws
2x M2×8mm round head screws
2x M2 iron nuts
1x self-clinching nut
For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting, which can achieve an excellent anti-shake effect. The O3 Air Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
Find the recommended 4S 450-750mAh batteries here!
Check out our other pre-built quads, as well as the rest of our GEPRC selection.
Features
Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning.
2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.
Specifications
Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ RunCam Wasp & Micro Cam - ELRS 2.4GHz
Frame: GEP-CL20
Wheelbase: 100mm
Gimbal plate: 2.0mm
Top plate: 2.5mm
Bottom plate: 1.5mm
FC system: GEP-F411-35A AIO
MCU: STM32F411CEU6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 35A
VTX: Link
Camera: RunCam Wasp
Antenna: GEPRC Peano 5.8G LHCP U.FL
Motor: GR1303.5 5500KV
Propeller: EMAX Avan Micro 2×2.4×4
Receiver: PNP (built-in DJI receiver), ELRS2.4G
Recommended battery: LiHv 4S 450mah-660mah
Flight time: 4-6min
Includes
1x CineLog20 HD Wasp
2x 2-inch propellers (pairs)
1x Naked GoPro Base
2x M15×150mm battery strap
2x Battery Silicone Pads
2x EVA Landing Pads
1x Set of screws
1x L-shaped screwdriver (1.5mm)
1x Antenna fixed tube
1x 4S Naked GoPro power cable (with balanced terminal head)
2x EVA damping rings of guards
1x TBS Antenna mount (Vertical Type)
1x TBS Antenna mount (Horizontal Type)
1x TBS Antenna printed parts
The screw package includes:
3x M2×12mm cup head screws
2x M2×5mm round head screws
1x M2×8mm round head screw with pad
3x M2×7mm round head screws
2x M2×8mm round head screws
2x M2 iron nuts
1x self-clinching nut
The CineLog35 Frame developed by CEPRC for mounting GoPro cameras is now officially released.
CL35 is an improvement on the CL30 Cinelog30 frame. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with Vista HD image transmission. The propeller guard adopts an integrated design, and the overall structure is firmer. GEP also upgraded the power system and chose a 12mm x 12mm motor hole position. When compared to CL30, the CL35 can install a larger 15-18-20 series motor, with a 3.5-inch propeller, and it has stronger power output. They've improved the damping rings, the shooting effect is more stable and clearer and you can use 3D prints to install the GoPro 8, GoPro 9, and GoPro 10. Or use the base to install a naked GoPro 8, Insta360 GO2, or Caddx Peanut camera.
We pursue lighter body weight, better flying feel, and more extended functions.
Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line!
Specifications
Dimensions: 203x203x42mm (Including the propeller guard)
Frame Style: Cinewhoop
Top plate: 2.5mm
Bottom plate: 2.0mm
Arm Plate: 3.5mm
Stack Size: 26.5mm x 26.5mm
Motor Mount: 12x12mm
Camera Mount: 14-19mm (Nano and Micro)
Weight: 130.7g (with Prop guards, and 3D printed parts included)
Recommended:
Motor: EMAX ECO II 2004 2000Kv Motor
FC/ESC: GEPRC F722 2-6S F7 AIO 2 45A 8-bit ESC
Prop: HQ Prop T90MMX3 Tri-Blade 3.5" Cinewhoop Prop 4 Pack
LiPo: RDQ Series 22.2V 6S 1300mAh 100C LiPo Battery
Includes
1x Top Plate 2.5mm
1x Arm Plate 3.5mm
1x Bottom Plate 2.0mm
2x Propeller guards
1x Power cable combination
1x Screw combination
1x Screwdriver combination
1x 3D Print mountings combination
1x Other Parts
All batteries must be shipped by a ground shipping method.
The RDQ Series of LiPos now includes the perfect solution for your EMAX Tiny Hawk!
Also available in a 5 pack.
Specifications
Capacity: 450mAh
Dimensions: 62x17x6.9mm
Includes
1x 3.8V 1S 450mAh 80C LiHV Battery
All batteries must be shipped by a ground shipping method.
The RDQ Series Lipo Batteries now has the perfect solution for your EMAX Tiny Hawk!
Specifications
Nominal Voltage: 3.8V
Capacity: 525mAh
Discharge Lead: PH2.0,
Dimensions: 65x17x6.7mm
Weight: 13g
Includes
1x RDQ Series 3.8V 1S 525mAh 80C LiHV Whoop/Micro Battery
All batteries must be shipped by a ground shipping method.
Another great HV LiPo choice in the RDQ Series. This one was designed specifically for the EMAX TinyHawk S, but it's a great pack for any 2S lightweight micro! We also carry a similar sized pack in XT30.
Check out the entire RDQ Series of LiPo and LiHV battery packs!
Specifications
Capacity: 300mAh
Max. Continuous Discharge Rate: 50C
Discharge Lead: 25mm, PH2.0
Balance Lead: 15mm, JST-XH
Dimensions: 45x17x14mm
Weight: 15.8g
Includes
RDQ Series 7.6V 2S 300mAh 50C LiHV Micro Battery - PH2.0
Plug in your VTx at any time with 0 power start-up!
Check out all our LEDs, and all our TinysLEDs products!
Features
Plug in your VTx at any time with 0 power start-up
(Not Available with FlightOne at current time)
Turn off your VTx on the line to avoid heat buildup
Fast Team Race Pit stops (Sub second transitions possible)
Compatible with all major VTxs
Turn off VTx during races to test hover builds without interfering with other pilots in the air.
Turn off VTx after Crash for clean video for other racers.
Solo Endurance Races, 3 quads ready on the line. Practice for more than 1 pack without taking off goggles. (Instructions on how to setup on OpenTX / Spektrum Coming soon)
LED Indicator light on board. (Light On \ Power On)
Can be used on any pad on Flight Controller.
Does not need a full UART.
I.E.: SmartAudio/Tramp on TX and RX for RealPit PinIO
Up to 4 RealPits per quad. This opens the possibility for LEDs, and VTX, and any other device you can imagine.
Toggle LED Power or any other devices under 1 amp draw.
Specifications
Currently Supported Software:
Betaflight (PinIO 3.3.x or Greater)
Butterflight (PinIO)
FlightOne 1.2.4 + (PINTOGGLE)
Operating Voltage: 5V - 28V (HV-6s) 1Amp Switch
Dimensions: 10 x 12.5 x 2.5 mm
Weight: 0.5 Grams w/ Heatshrink
Includes
1x TinysLEDs RealPit VTX Power Switch
1x 1/2" Heat shrink piece
Demo Video ( Team EMAX Team Race):
Setup
Betaflight Settings:
In CLI:
Type RESOURCE
Locate UART TX/RX pad resource ID you are using. We wired to RX4 in this demo. RX4 is A01 Note the name of resource and ID.
Next we will clear that pad from its assigned resource.
Type
RESOURCE SERIAL_RX 4 NONE
Next we will set the Custom Mode Switches. We will set up 1 switch Copy and past these Commands into CLI:
set pinio_box = 40,41,42,43
aux 2 40 2 1600 2100 0
Next we need to assign the Resource ID to the Custom Mode switch. Using the Resource ID from above. "A01"
resource PINIO 1 A01
If you wish to set up more pads for additional RealPits. replace the area in brackets with your resource IDs: Copy these extra lines to add more modes as well.:
set pinio_box = 40,41,42,43
aux 3 41 3 1600 2100 0
aux 4 42 4 1600 2100 0
aux 5 43 5 1600 2100 0
resource PINIO 2 [resource=I.E=A04]resource PINIO 3 [resource=I.E=A05]resource PINIO 4 [resource=I.E=A06]
Type SAVE in CLI and then press enter. Your FC will reboot after applying changes.
Now go to Modes and Assign an AUX channel to the USER1 mode. Just like an arm or turtle mode switch. Click SAVE.
Now flip the switch and test. A RED LED will be lit on RealPit if your are providing power.
FlightOne Settings:
At the current time you must use Firmware version 1.2.x or greater to enable "PINTOGGLE" commands. This is available on FlightOne Discord. flightone.com/discord and website at FlightOne.us
Wire RealPit VTX + to VTX Positive pad and BATT+ to Battery Source (5v-28v)
Wire VTC pad to TX4 pad on FlightOne FC. Solder the TX4 to NOR. Then Wire GND pad to GND pad on FlightOne FC
In Setup Tab:
Setup PINTOGGLE switch.
Use Switch to Power VTX on and off.
Notes: FlightOne Does not support ZERO power on. VTX will blip for a micro second prior to turning back off.
Wiring Diagram Instructions:
Tags: real pit, vtx power switch, unify switch, pit mode switch, vtx pit mode, vtx paralyze,
