ARA310780, Arrma 4x4 Composite Front Slider Driveshaft Set
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Granite 4x4 550
Arrma Granite 4x4 Mega
Arrma Senton 3S BLX
Arrma Senton 4x4 550
Arrma Senton Mega
Arrma Typhon 3S BLX
Arrma Typhon 4X4 550
Arrma Vorteks 3S BLX
This is a replacement Arrma 4x4 Composite Front Slider Driveshaft Set.
This product was added to our catalog on October 3, 2021
This is a set of Arrma 4x4 Axles for use with the Arrma Big Rock Crew Cab, Granite and Senton kits. These high-quality wheel axles are manufactured from durable material that will provide long-lasting performance when the bashing action is extreme.
Features:
Precision machined from high-quality material for precise fit to your vehicle
Tough and durable design
Includes:
(2) 4x4 Axles
This product was added to our catalog on July18, 2021
This is a replacement set of two Arrma 8S-BLX CVD Axle, intended for use with 8S-BLX Kraton kits.
Features:
Tough steel for hard-wearing durability and consistent performance on all terrains
Precision manufactured to provide a smooth and friction free axle operation in all conditions
Includes:
(2) CVD Axle (12x58mm)
This product was added to our catalog on July18, 2021
ARA310973, Arrma Outcast 8S CVD 136mm Driveshaft
This is a replacement Arrma Outcast 8S CVD 136mm Driveshaft, intended for use with the 8S BLX Outcast. This high-quality 136mm CVD Driveshaft is the perfect replacement part for your ARRMA vehicle.
Features:
Tough steel for long-lasting durability and low wear
Precision manufactured dogbone pin for smooth operation in all conditions
Precision engineered CVD coupling for ultra-smooth power transfer and low-maintenance
This product was added to our catalog on May 15, 2021
ARA320758, Arrma Kraton 6S Wing Mount
Wing Mount Overview:This is the Kraton 6S Wing Mount from Arrma®. Designed as a reliable replacement for your original wing mount, this part is built from tough composite material to withstand various conditions. It features precision mounting holes for easy installation and servicing, making it a practical choice for maintaining your Kraton 6S vehicle.
Features:Tough composite material for durability in diverse conditionsPrecision mounting holes for quick and easy servicingOne piece molding for added strengthIncludes:(1) Wing Mount(2) 4x22mm Button Head Screws(2) 4x37mm Button Head Screws(4) 4mm Nyloc Nuts
This product was added to our catalog on August 2, 2024
BZN540126, BlackZon Drive Shaft Set (Front/Rear), Smyter
Drive Shaft Set (Front/Rear), Smyter
This product was added to our catalog on November 10, 2021
HRAATF288RC, Hot Racing Arrma 4x4 Metal Splined Drive Shafts
This is a Hot Racing Arrma 4x4 Metal Splined Drive Shafts, an optional upgrade heavy duty splined star drive axle kit for 1/10 Arrma 4X4 vehicles
Features:
Replaces stock diff outdrives and factory plastic drive axles
CNC machined and hardened S2 spring steel wheel axle stubs
CNC machined and hardened #45 steel outdrives, drive hubs, and 45mm slider spline
Hard anodized black aluminum 45mm slider
Red anodized aluminum pin capture rings with rubber o-rings to prevent movement
Rubber dust boot to retain lubrication and help protect slider against elements
Includes:
(2) CVD shaft assemblies
(2) CNC steel Output diff gear
(2) M4x2.5x11mm screw shafts
Specifications:
Approximate overall collapsed length: 108mm
NOTE:
Replaces stock Arrma AR310775 diff outdrives and AR310780 front shafts, or AR310864 rear shafts
Does not fit V3 Big Rock models.
Compatible With:
Big Rock 4X4 3S BLX: AR102711
Granite 4X4 3S BLX: AR102666
Granite 4X4: AR102665 (green), AR102676 (red)
Senton 4X4: AR102667 (red), AR102678 (blue)
Senton 4X4 3S BLX: AR102668
Typhon 4X4 3S BLX: AR102696 (optional - requires Hot Racing ATF117XT02 17mm hubs. Will NOT work with stock 17mm hubs!)
This product was added to our catalog on December 16, 2021
HRAMXX288RC06, Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft (Blue) (2)
The Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft is an optional heavy duty splined star drive CVD axle kit that fits the front or rear of the Traxxas 1/10th scale Maxx monster truck.
NOTE:
Traxxas WIDE Maxx applications require optional 65mm center drive tube (HRASLD65T)
Must re-use the stock Drive pin and set screw Pin
Maintain CV joint and shaft spline with grease
Use medium thread lock on screws threading into metal
Features:
CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle
CNC machined aluminum slider tube
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Rubber dust cover boots
Replaces factory front or rear driveshaft axles
Specifications:
Collapsed length (overall): 140mm
Extended length (overall resulting in zero shaft engagement): 156mm
Collapsed length (wheel pin to outdrive pin): 118mm
Extended length (wheel pin to outdrive pin resulting in zero shaft engagement): 132mm
Includes:
(2) splined axle assemblies
This product was added to our catalog on December 16, 2021
HRASTE282RP, Hot Racing Traxxas Slash Steel CV Drive Shafts
The Hot Racing Traxxas Slash Steel CV Drive Shafts are an excellent way to increase the reliability of your Traxxas Slash 2wd. Made with high strength steel these shafts offer higher strength over the stock plastic shafts along with smoother operation due to the CV (constant velocity) joint. Package includes two assembled steel CV drive shafts and two differential drive cups.
This product was added to our catalog on May 16, 2021
HRATFF288RC, Hot Racing Arrma 4S BLX Long CV Front/Rear Driveshafts (2)
Features:
Replaces stock diff outdrives and factory plastic drive axles
CNC machined and hardened S2 spring steel wheel axle stubs
CNC machined and hardened #45 steel outdrives, drive hubs, and slider spline
Hard anodized black aluminum 85mm slider
Red anodized aluminum pin capture rings with rubber o-rings to prevent movement
Rubber dust boot to retain lubrication and help protect slider against elements
Fits KRATON 4X4 4S BLX (ARA102690) and OUTCAST 4X4 4S BLX (ARA102692) front or rear
Replaces stock Arrma AR310775 diff outdrives and AR310887 front shafts, or AR310888 rear shafts
Includes:
(2) CVD shaft assemblies
(2) CNC steel Output diff gear
(2) M4x2.5x11mm screw shafts
This product was added to our catalog on May 16, 2021
KYOFAW210, Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L)
This is an optional Kyosho Fazer Heavy Duty Center Shaft, intended for use with Fazer FZ02L kits. This CNC machined heavy duty aluminum shaft is anodized red for added style. This durable precision made center shaft is for high power motors with high gear ratio setups. Can be used with stock outdrives.
NOTE: This is for the FZ02L (Long) chassis; if you have a FZ02 (Short) chassis, please see part KYOFAW209.
This product was added to our catalog on June 15, 2023
TRA1651, Traxxas Driveshaft Set
This is a replacement Traxxas Drive Shaft Set, and is intended for use with the Traxxas Bandit.
Includes:
(2) inside shafts
(2) outside shafts
(4) universal joints (metal balls with 4 pins sticking out in a cross pattern)
This product was added to our catalog on September 7, 2021
TRA1951R, Traxxas Heavy Duty Steel CV Rear Driveshaft (2)
This is a pack of two Traxxas Heavy Duty Steel CV Rear Driveshafts. Traxxas Steel Constant Velocity Shafts deliver the ultimate in torque handling and efficient power transfer with gleaming nickel-plated shafts, combined with black silicone boots that add a custom look with improved durability. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are captured so there is less worry about losing a pin.
This product was added to our catalog on April 13, 20213
TRA6757, Traxxas Steel Splined Driveshaft Rebuild Kit
This is a replacement Steel Splined Driveshaft Rebuild Kit, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This kit includes the necessary pins, dustboots, lubricant and hardware to rebuild two driveshafts.
Complete Driveshaft Replacement:
TRA6451 Front Driveshaft
TRA6452 Rear Driveshaft
This product was added to our catalog on May 7, 2021
TRA6758, Differential output shaft (for steel constant-velocity driveshafts) (2)
TRA6758, DIFF OUTPUT SHAFT STEEL
This product was added to our catalog on September 7, 2021
TRA6765R, Traxxas Rustler 4X4 Aluminum Center Driveshaft (Red)
Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate play. The vivid anodized finish features a laser-etched Traxxas logo for extra style. Requires #6888X drive hub if upgrading from composite driveshaft.
This product was added to our catalog on September 7, 2021
TRA6841, Traxxas Center Driveshaft Cover (Clear)
This is a set of replacement Traxxas Center Driveshaft Cover, and are intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6851R, Traxxas Slash 4x4 and Stampede 4x4 Front Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 scale trucks. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin.
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA6851X, Traxxas Heavy Duty Front Driveshaft Assembly
Fits:
Traxxas Rally
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on September 7, 2021
TRA6852A, Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly
Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly. These are the replacement rear driveshaft assembly that can be installed on the right or left side of the chassis. Package includes one factory assembled, ready to install driveshaft, and one screw pin.
This product was added to our catalog on May 31, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA6852X, Traxxas Heavy Duty Rear Driveshaft Assembly
This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This package includes the parts needed to replace one rear driveshaft.
Fits:
Traxxas Nitro Slash
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA7051X, Traxxas Steel CV Driveshaft (4)Traxxas Steel CV Driveshaft (4)
This is a set of four optional Traxxas steel CV driveshafts, and are intended for use with the Traxxas 1/16 Slash.
This product was added to our catalog on September 7, 2021
TRA7450, Traxxas Ford Fiesta ST Rally Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install)
Replacement extreme heavy duty front driveshaft comes fully assembled and ready to install with 6 mm axle. Fits left or right side.
Does not fit standard suspension components. Must be used with other extreme heavy duty components.
This product was added to our catalog on March 2, 2024
TRA7650, Traxxas LaTrax Front/Rear Assembled Driveshaft (2)
This is a pack of two replacement LaTrax Driveshafts. These driveshafts come fully assembled and can be used in the front or rear of the vehicle.
This product was added to our catalog on May 11, 2021
TRA7650R, Traxxas LaTrax Aluminum Front/Rear Driveshaft (2) (Blue)
This is a pack of two optional LaTrax Aluminum Driveshafts. These blue anodized driveshafts are crafted from 6061-T6 aluminum alloy material and provide a direct fit for either the front or rear location in the vehicle. Package also includes two axle screws.
This product was added to our catalog on April 19, 2021
TRA7750X, Traxxas X-Maxx Constant Velocity Steel Driveshaft (8S Spec)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, #7768R, or #7768G)
This product was added to our catalog on September 7, 2021
TRA7755, Traxxas X-Maxx/XRT Aluminum Center Driveshaft Assembly
Replacement part for these models:
Traxxas XRT
Traxxas X-Maxx
This product was added to our catalog on September 7, 2021
TRA7896, Traxxas X-Maxx WideMaxx / XRT Steel Constant Velocity Driveshaft
Traxxas X-Maxx WideMaxx Steel Constant Velocity Driveshaft. This steel driveshaft is intended for the Traxxas X-Maxx when equipped with the optional Traxxas WideMaxx Suspension Kit (TRA7895). Package includes one driveshaft.
This product was added to our catalog on May 13, 2021
TRA8150, Traxxas TRX-4 Long Arm Lift Kit Center Driveshaft Extension Kit
Replacement driveshaft kit for the extended center driveshafts used on the TRX-4® Long Arm Lift Kit. Includes extra-long internal-splined shafts (2), long internal-splined shaft, and medium internal-splined shaft.
This product was added to our catalog on May 7, 2021
TRA8250, Traxxas TRX-4 Plastic Center Half Shaft Set
The center half-shaft set includes front internal-spline halves (2), rear internal-spline halves (2), two external-spline halves, and pin retainers (4).
This product was added to our catalog on May 7, 2021
TRA8555, Traxxas Unlimited Desert Racer Center Rear Driveshaft
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. This driveshaft is made from 6061-T6 aluminum and has been black-anodized. This shaft is fully assembled and includes two 3mm screw pins.
This product was added to our catalog on September 7, 2021
TRA8651, Traxxas E-Revo 2.0 Driveshaft Rebuild Kit
This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshafts.
This product was added to our catalog on May 8, 2021
TRA8655R, Traxxas E-Revo 2.0 Steel Center Driveshafts
Traxxas E-Revo 2.0 Steel Center Driveshafts. Package includes an optional set of center driveshafts intended for the E-Revo 2.0 and hardware.
This product was added to our catalog on September 7, 2021
TRA8950, Traxxas Maxx Driveshaft Assembly
This is a replacement Traxxas Maxx Driveshaft Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.
Includes:
(1) Driveshaft assembly Maxx® Duty (front or rear)
(1) Screw pin
This product was added to our catalog on April 18, 2021
TRA8950X, Traxxas Maxx Steel Constant-Velocity Driveshaft Set (4)
The Traxxas Maxx Steel Constant-Velocity Driveshaft Set is a heavy duty upgrade for your Traxxas Maxx. Package includes the parts needed to replace all four driveshafts, as well as bearings and hardware.
NOTE: TRA7758 wheel nuts and TRA8654 wheel hubs are required for completion.
This product was added to our catalog on May 7, 2021
TRA8996X, Traxxas WideMaxx Steel Constant-Velocity Driveshafts
This is an optional Traxxas WideMaxx Steel Constant-Velocity Driveshaft Set. This is a complete upgrade, with steel constant-velocity driveshafts, bearings and outdrives. These parts are intended for use with the Traxxas WideMaxx or the Traxxas Maxx equipped with the optional WideMaxx suspension kit (TRA8995).
These parts must be combined with 17mm splined wheel hubs (TRA8654) and 17mm nuts (TRA7758) to complete the installation.
This product was added to our catalog on April 12, 2021
